Standard view Table view

RUGGEDCOM-POE-MIB

        Expanded list of PoE port Powered status to explicitly
identify the 2-pair and 4-pair power modes.
Source file
RUGGEDCOM-POE-MIB
Last revised
Identity
rcPoe
Base OID
1.3.6.1.4.1.15004.4.7
Imported Objects
RUGGEDCOM-MIB ruggedcomMgmt ruggedcomTraps
SNMPv2-CONF OBJECT-GROUP
SNMPv2-SMI Integer32 MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TC TruthValue
Net-SNMP examples using the siemens MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'RUGGEDCOM-POE-MIB' -M '/opt/observium/mibs/siemens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RUGGEDCOM-POE-MIB::rcPoe'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RUGGEDCOM-POE-MIB' -M '/opt/observium/mibs/siemens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RUGGEDCOM-POE-MIB::rcPoe'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (22)
rcPoe
.1.3.6.1.4.1.15004.4.7
rcPoeBase
.1.3.6.1.4.1.15004.4.7.1
rcPoeCapacity r/w
WInteger32
 .1.3.6.1.4.1.15004.4.7.1.1
rcPoeMinimumVoltage r/w
VInteger32
 .1.3.6.1.4.1.15004.4.7.1.2
rcPoeReenableTime r/w
secondsUnsigned32
 .1.3.6.1.4.1.15004.4.7.1.3
rcPoeConsumption
secondsSNMPv2-SMIInteger32
 .1.3.6.1.4.1.15004.4.7.1.4
rcPoeOverheatStatus
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.15004.4.7.1.5
rcPoeOverloadStatus
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.15004.4.7.1.6
rcPoeUndervoltageStatus
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.15004.4.7.1.7
rcPoeTables
.1.3.6.1.4.1.15004.4.7.2
rcPoePortTable
.1.3.6.1.4.1.15004.4.7.2.1
rcPoePortEntry
rcPoePortNumber
 .1.3.6.1.4.1.15004.4.7.2.1.1
rcPoePort
Integer32
 .1.3.6.1.4.1.15004.4.7.2.1.1.1
rcPoePortAdmin r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.15004.4.7.2.1.1.2
rcPoePortPriority r/w
Enumeration
 .1.3.6.1.4.1.15004.4.7.2.1.1.3
rcPoePortPowered
Enumeration
 .1.3.6.1.4.1.15004.4.7.2.1.1.4
rcPoePortClass
Integer32
 .1.3.6.1.4.1.15004.4.7.2.1.1.5
rcPoePortVoltage
VInteger32
 .1.3.6.1.4.1.15004.4.7.2.1.1.6
rcPoePortCurrent
mAInteger32
 .1.3.6.1.4.1.15004.4.7.2.1.1.7
rcPoeConformance
.1.3.6.1.4.1.15004.4.7.3
rcPoeGroups
.1.3.6.1.4.1.15004.4.7.3.2
ruggedcomPoeTraps
.1.3.6.1.4.1.15004.5.12
Dependencies (4) 4 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. RUGGEDCOM-MIBsiemens
  3. SNMPv2-CONFrfc
  4. SNMPv2-TCrfc
  5. RUGGEDCOM-POE-MIBsiemensselected
Conformance Groups (5)
rcBasePoeGroup
rcPoeCapacity rcPoeMinimumVoltage rcPoeReenableTime rcPoeConsumption
A group of objects providing ability ability to control and view
PoE system parameters.
 .1.3.6.1.4.1.15004.4.7.3.2.1
rcBasePoeStatusGroup
rcPoeOverheatStatus rcPoeOverloadStatus rcPoeUndervoltageStatus
A group of objects providing ability ability to view status of
PoE in the device.
 .1.3.6.1.4.1.15004.4.7.3.2.2
rcPoeTableGroup
rcPoePort rcPoePortAdmin rcPoePortPowered rcPoePortClass rcPoePortVoltage rcPoePortCurrent
A group of object providing information about .
 .1.3.6.1.4.1.15004.4.7.3.2.3
rcPoeTablePriorityGroup
rcPoePortPriority
A group of object providing information about .
 .1.3.6.1.4.1.15004.4.7.3.2.4
rcPoeNotifyGroup
rcPoeOverheat rcPoeOverload rcPoeUndervoltage
A group of objects that define trap.
 .1.3.6.1.4.1.15004.4.7.3.2.5
Notifications / Traps (3)
NameOIDDescription
rcPoeOverheat
.1.3.6.1.4.1.15004.5.12.1
PoE overheated.
rcPoeOverload
.1.3.6.1.4.1.15004.5.12.2
PoE overloaded.
rcPoeUndervoltage
.1.3.6.1.4.1.15004.5.12.3
PoE voltage low.