 ruckusZDEventAPJoinTrap
| .1.3.6.1.4.1.25053.2.2.1.1 | en there is a AP join event.
The AP's MAC address is enclosed. |
ruckusZDEventSystemColdStartTrap
| .1.3.6.1.4.1.25053.2.2.1.10 | Trigger when system performs cold start. |
ruckusZDEventSmartRedundancyChangetoActive
| .1.3.6.1.4.1.25053.2.2.1.100 | [Smart Redundancy] Peer ZoneDirector peer ip not found, system changed to active state |
ruckusZDEventSmartRedundancyActiveConnected
| .1.3.6.1.4.1.25053.2.2.1.101 | [Smart Redundancy] connected, system is in active state |
ruckusZDEventSmartRedundancyActiveDisconnected
| .1.3.6.1.4.1.25053.2.2.1.102 | [Smart Redundancy] disconnected, system is in active state |
ruckusZDEventSmartRedundancyStandbyConnected
| .1.3.6.1.4.1.25053.2.2.1.103 | [Smart Redundancy] connected, system is in standby state |
ruckusZDEventSmartRedundancyStandbyDisconnected
| .1.3.6.1.4.1.25053.2.2.1.104 | [Smart Redundancy] disconnected, system is in standby state |
ruckusZDEventAPChannelChangeTrap
| .1.3.6.1.4.1.25053.2.2.1.11 | Trigger when AP channel changes. |
ruckusZDEventRadiusAuthUnavailableTrap
| .1.3.6.1.4.1.25053.2.2.1.12 | Trigger when RADIUS authentication server unavailable. |
ruckusZDEventLBSAdminEnabled
| .1.3.6.1.4.1.25053.2.2.1.120 | [LBS] admin enable location database server |
ruckusZDEventLBSAdminDisabled
| .1.3.6.1.4.1.25053.2.2.1.121 | [LBS] admin disable location database server |
ruckusZDEventLBSZDLSConnectionUp
| .1.3.6.1.4.1.25053.2.2.1.122 | [LBS] the connection between ZD and LS from down to up |
ruckusZDEventLBSZDLSConnectionDown
| .1.3.6.1.4.1.25053.2.2.1.123 | [LBS] the connection between ZD and LS from up to down |
ruckusZDEventLBSReceiveCMDFootfall
| .1.3.6.1.4.1.25053.2.2.1.124 | [LBS] ZD receive passive tracking footfall command from LS |
ruckusZDEventLBSReceiveCMDCalibration
| .1.3.6.1.4.1.25053.2.2.1.125 | [LBS] ZD receive passive tracking calibration command from LS |
ruckusZDEventRadiusAcctUnavailableTrap
| .1.3.6.1.4.1.25053.2.2.1.13 | Trigger when RADIUS accounting server unavailable. |
ruckusZDEventClientJoinFailAPBusyTrap
| .1.3.6.1.4.1.25053.2.2.1.14 | Trigger when client joins fail because AP is busy. |
ruckusZDEventInterferenceADHoc
| .1.3.6.1.4.1.25053.2.2.1.15 | Trigger when an interference AD hoc is detected. |
ruckusZDEventImageUpgradeFailTrap
| .1.3.6.1.4.1.25053.2.2.1.16 | Trigger when AP image upgrade fails. |
ruckusZDEventSSIDSpoofTrap
| .1.3.6.1.4.1.25053.2.2.1.2 | en a SSID-spoofing rogue AP is detected.
The rogue AP's MAC address and SSID are enclosed. |
ruckusZDEventHeartbeatTrap
| .1.3.6.1.4.1.25053.2.2.1.22 | Trigger with trap heartbeat sent. |
ruckusZDEventAttackedTrap
| .1.3.6.1.4.1.25053.2.2.1.24 | Trigger with a malicious attack is found. |
ruckusZDEventSystemWarmStartTrap
| .1.3.6.1.4.1.25053.2.2.1.25 | Trigger when system performs warm start. |
ruckusZDEventInterfereAPTrap
| .1.3.6.1.4.1.25053.2.2.1.26 | en a rogue AP used same channel with current AP is
detected. |
ruckusZDEventMACSpoofTrap
| .1.3.6.1.4.1.25053.2.2.1.3 | en a MAC-spoofing rogue AP is detected.
The rogue AP's MAC address and SSID are enclosed. |
ruckusZDEventAPSystemColdStartTrap
| .1.3.6.1.4.1.25053.2.2.1.31 | Trigger when an AP performs cold start. |
ruckusZDEventAPSystemWarmStartTrap
| .1.3.6.1.4.1.25053.2.2.1.32 | Trigger when an AP performs warm start. |
ruckusZDEventAPSSIDChangedTrap
| .1.3.6.1.4.1.25053.2.2.1.33 | Trigger when an AP SSID changed. |
ruckusZDEventAPClientExceedValve
| .1.3.6.1.4.1.25053.2.2.1.34 | Triggered when AP online client exceed valve. |
ruckusZDEventAPAvailableStatusTrap
| .1.3.6.1.4.1.25053.2.2.1.35 | Trigger when AP is available. |
ruckusZDEventAPWirelessInterfaceFaultTrap
| .1.3.6.1.4.1.25053.2.2.1.36 | Trigger when AP wireless interface is fault. |
ruckusZDEventSystemCpuUtilExceedValve
| .1.3.6.1.4.1.25053.2.2.1.37 | Trigger when System CPU utilization is exceed valve. |
ruckusZDEventSystemMemUtilExceedValve
| .1.3.6.1.4.1.25053.2.2.1.38 | Trigger when System memory utilization is exceed valve. |
ruckusZDEventSystemBandwidthUtilExceedValve
| .1.3.6.1.4.1.25053.2.2.1.39 | Trigger when System bandwidth utilization is exceed valve. |
ruckusZDEventRogueAPTrap
| .1.3.6.1.4.1.25053.2.2.1.4 | en a rogue AP is detected.
The rogue AP's MAC address and SSID are enclosed. |
ruckusZDEventSystemDropPacketRateExceedValve
| .1.3.6.1.4.1.25053.2.2.1.40 | Trigger when System drop packet rate is exceed valve. |
ruckusZDEventAPSyncTimeFail
| .1.3.6.1.4.1.25053.2.2.1.41 | Trigger when AP sync clock failure with AC. |
ruckusZDEventSystemCpuUtilClrWarn
| .1.3.6.1.4.1.25053.2.2.1.42 | Trigger when System CPU utilization is under the valve. |
ruckusZDEventSystemMemUtilClrwarn
| .1.3.6.1.4.1.25053.2.2.1.43 | Trigger when System memory utilization is under the valve. |
ruckusZDEventAPLostTrap
| .1.3.6.1.4.1.25053.2.2.1.5 | en AP lost contact.
The AP's MAC address is enclosed. |
ruckusZDEventAPLostHeartbeatTrap
| .1.3.6.1.4.1.25053.2.2.1.6 | en AP lost heartbeats.
The AP's MAC address is enclosed. |
ruckusZDEventClientJoin
| .1.3.6.1.4.1.25053.2.2.1.60 | when a client join a AP success.
The client's MAC address, AP's MAC address and SSID are enclosed. |
ruckusZDEventClientJoinFailed
| .1.3.6.1.4.1.25053.2.2.1.61 | when a client join a AP failed.
The client's MAC address, AP's MAC address and SSID are enclosed. |
ruckusZDEventClientJoinFailedAPBusy
| .1.3.6.1.4.1.25053.2.2.1.62 | when a client join a AP failed because of AP too busy.
The client's MAC address, AP's MAC address and SSID are enclosed. |
ruckusZDEventClientDisconnect
| .1.3.6.1.4.1.25053.2.2.1.63 | when a client disconnect from AP.
The client's MAC address, AP's MAC address and SSID are enclosed. |
ruckusZDEventClientRoamOut
| .1.3.6.1.4.1.25053.2.2.1.64 | when a client roam out from AP.
The client's MAC address, AP's MAC address and SSID are enclosed. |
ruckusZDEventClientRoamIn
| .1.3.6.1.4.1.25053.2.2.1.65 | when a client roam in from AP.
The client's MAC address, AP's MAC address and SSID are enclosed. |
ruckusZDEventClientAuthFailed
| .1.3.6.1.4.1.25053.2.2.1.66 | when a client authenticate failure .
The client's MAC address, AP's MAC address and SSID are enclosed.Failure reason. |
ruckusZDEventClientAuthorizationFailed
| .1.3.6.1.4.1.25053.2.2.1.67 | when a client has no authorization to join a AP.
The client's MAC address, AP's MAC address and SSID are enclosed. |
ruckusZDEventClientAuthFailBlockTrap
| .1.3.6.1.4.1.25053.2.2.1.7 | when a client fails authentication too many times in a row.
The client's MAC address, AP's MAC address and SSID are enclosed. |
ruckusZDEventAPResetTrap
| .1.3.6.1.4.1.25053.2.2.1.8 | Trigger when AP reboots. |
ruckusZDEventAPCPUvalve
| .1.3.6.1.4.1.25053.2.2.1.83 | Triggered when AP cpu util exceed valve. |
ruckusZDEventAPMEMvalve
| .1.3.6.1.4.1.25053.2.2.1.84 | Triggered when AP memory util exceed valve. |
ruckusZDEventAPCPUvalveClrwarn
| .1.3.6.1.4.1.25053.2.2.1.85 | Trigger when AP cpu utilization is under the valve. |
ruckusZDEventAPMEMvalveClrwarn
| .1.3.6.1.4.1.25053.2.2.1.86 | Trigger when AP memory utilization is under the valve. |
ruckusZDEventAPNumStaExceedValveClrwarn
| .1.3.6.1.4.1.25053.2.2.1.87 | Trigger when online client clr warning. |
ruckusZDEventDhcpPoolFull
| .1.3.6.1.4.1.25053.2.2.1.88 | Trigger when DHCP pool is full. |
ruckusZDEventDhcpPoolAbun
| .1.3.6.1.4.1.25053.2.2.1.89 | Trigger when DHCP pool is abundant. |
ruckusZDEventIPChangeTrap
| .1.3.6.1.4.1.25053.2.2.1.9 | Trigger when IP changes. |
