RUCKUS-WIRED-CLIENT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
18
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1 · 1 row entry · 18 columns
A table providing information about the clients 
directly connected on all the ports in the Ruckus
devices.
          
When FlexAuth is enabled, this table contains entries
for all the authenticated clients (success/failure).
Entries get created when clients are authenticated
and cleared when they logoff or timeout.
          
When FlexAuth is not enabled, this table populates the
entries with devices learned through LLDP/CDP, if
LLDP/CDP is enabled.
ruckusWiredClientEntry entry .1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1
An entry containing information about a specific client
on a given port
Indexes
IF-MIBifIndex ruckusWiredClientMac
Column Syntax OID
ruckusWiredClientMac
Specifies the MAC Address of the client
(device/host) represented by this client entry
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.1
ruckusWiredClientVlan
Specifies the VLAN, the client (device/host) belongs
to, represented by this client entry.

In case of voice-phones, this VLAN is the voice-VLAN
(tagged) and in all other cases, likely it would be
an unta…
VlanId
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.2
ruckusWiredClientType
Decribes the type of the client connnected on this port
Enumeration
Enumerated Values:
1other
2phone
3wlanAP
4router
5bridge
6cableDevice
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.3
ruckusWiredClientAuthType
Specifies the authentication method that is used for
authenticating the client on this port represented
by this client (when FlexAuth is enabled). Otherwise,
it's none.
Enumeration
Enumerated Values:
1none
2dot1x
3macAuth
4webAuth
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.4
ruckusWiredClientStatus
The authentication state of the client which can
take the following values.

noAuth - not authenticated
allowed - client authentication is successful, so
the complete access is granted
blocked - clien…
Enumeration
Enumerated Values:
1noAuth
2allowed
3blocked
4restricted
5critical
6guest
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.5
ruckusWiredClientDescr
Desribes the client as derived from LLDP/CDP device
description for LLDP/CDP learned devices. Otherwise
it's an empty string for now.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.6
ruckusWiredClientUserName
Specified the User name associated with the client,
represented by this entry. It coule be username or
MAC address, where user-name is not present and
not applicable.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.7
ruckusWiredClientV4Addr
The IPv4 address of the client represented by this
entry. A client can have both IPv4 and IPv6
addresses bound on dual-stack hosts.
INET-ADDRESS-MIBInetAddressIPv4
Textual Convention: INET-ADDRESS-MIBInetAddressIPv4 OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.8
ruckusWiredClientV6Addr
The IPv6 address of the client represented by this
entry. A client can have both IPv4 and IPv6
addresses bound on dual-stack hosts.
INET-ADDRESS-MIBInetAddressIPv6
Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 OctetString
Type Constraints:
range: 16
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.9
ruckusWiredClientUpTime
Specifies the time the client had been up from the
time the client entry is created in the Ruckus device.
centi-secondsSNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.10
ruckusWiredClientTxPkts
The total number of packets transmitted on this port
for this client.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.11
ruckusWiredClientRxPkts
The total number of packets received on this port for
this client.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.12
ruckusWiredClientTxOctets
The total number of octets transmitted on this port
for this client.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.13
ruckusWiredClientRxOctets
The total number of octets receivedon this port for
this client.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.14
ruckusDhcpClientHostName
Specified the Host name associated with the client,
represented by this entry.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.15
ruckusDhcpClientDeviceTypeName
Specified the Device type name (mobile,laptop) associated with the
client,
represented by this entry.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.16
ruckusDhcpClientOsVendorName
Specified the OS vendor name associated with the client,
represented by this entry.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.17
ruckusDhcpClientModelName
Specified the Device mode name associated with the client,
represented by this entry.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.1991.1.1.3.43.1.1.1.1.18