RIELLOUPS-MIB Table View

A list of input table entries.  The number of entries
is given by the value of upsInputNumLines.

rupsInputEntry row .1.3.6.1.4.1.5491.10.1.3.3.1

An entry containing information applicable to a
particular input line.

Indexes

rupsInputLineIndex

Column	Syntax	OID
rupsInputLineIndex The input line identifier.	PositiveInteger Type Constraints: range: 1..2147483647 Description: This data type is a non-zero and non-negative value.	.1.3.6.1.4.1.5491.10.1.3.3.1.1
rupsInputFrequency The present input frequency.	NonNegativeInteger Type Constraints: range: 0..2147483647 Description: This data type is a non-negative value.	.1.3.6.1.4.1.5491.10.1.3.3.1.2
rupsInputVoltage The magnitude of the present input voltage.	NonNegativeInteger Type Constraints: range: 0..2147483647 Description: This data type is a non-negative value.	.1.3.6.1.4.1.5491.10.1.3.3.1.3
rupsInputCurrent The magnitude of the present input current.	NonNegativeInteger Type Constraints: range: 0..2147483647 Description: This data type is a non-negative value.	.1.3.6.1.4.1.5491.10.1.3.3.1.4
rupsInputTruePower The magnitude of the present input true power.	NonNegativeInteger Type Constraints: range: 0..2147483647 Description: This data type is a non-negative value.	.1.3.6.1.4.1.5491.10.1.3.3.1.5

A list of output table entries.  The number of
entries is given by the value of rupsOutputNumLines.

rupsOutputEntry row .1.3.6.1.4.1.5491.10.1.4.4.1

An entry containing information applicable to a
particular output line.

Indexes

rupsOutputLineIndex

Column	Syntax	OID
rupsOutputLineIndex The output line identifier.	PositiveInteger Type Constraints: range: 1..2147483647 Description: This data type is a non-zero and non-negative value.	.1.3.6.1.4.1.5491.10.1.4.4.1.1
rupsOutputVoltage The present output voltage.	NonNegativeInteger Type Constraints: range: 0..2147483647 Description: This data type is a non-negative value.	.1.3.6.1.4.1.5491.10.1.4.4.1.2
rupsOutputCurrent The present output current.	NonNegativeInteger Type Constraints: range: 0..2147483647 Description: This data type is a non-negative value.	.1.3.6.1.4.1.5491.10.1.4.4.1.3
rupsOutputPower The present output true power.	NonNegativeInteger Type Constraints: range: 0..2147483647 Description: This data type is a non-negative value.	.1.3.6.1.4.1.5491.10.1.4.4.1.4
rupsOutputPercentLoad The percentage of the UPS power capacity presently being used on this output line, i.e., the greater of the percent load of true power capacity and the percent load of VA.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5491.10.1.4.4.1.5
rupsOutputPeakCurrent The present output peak current.	NonNegativeInteger Type Constraints: range: 0..2147483647 Description: This data type is a non-negative value.	.1.3.6.1.4.1.5491.10.1.4.4.1.6

A list of bypass table entries.  The number of
entries is given by the value of rupsBypassNumLines.

rupsBypassEntry row .1.3.6.1.4.1.5491.10.1.5.3.1

An entry containing information applicable to a
particular bypass input.

Indexes

rupsBypassLineIndex

Column	Syntax	OID
rupsBypassLineIndex The bypass line identifier.	PositiveInteger Type Constraints: range: 1..2147483647 Description: This data type is a non-zero and non-negative value.	.1.3.6.1.4.1.5491.10.1.5.3.1.1
rupsBypassVoltage The present bypass voltage.	NonNegativeInteger Type Constraints: range: 0..2147483647 Description: This data type is a non-negative value.	.1.3.6.1.4.1.5491.10.1.5.3.1.2
rupsBypassCurrent The present bypass current.	NonNegativeInteger Type Constraints: range: 0..2147483647 Description: This data type is a non-negative value.	.1.3.6.1.4.1.5491.10.1.5.3.1.3
rupsBypassPower The present true power conveyed by the bypass.	NonNegativeInteger Type Constraints: range: 0..2147483647 Description: This data type is a non-negative value.	.1.3.6.1.4.1.5491.10.1.5.3.1.4

A list of alarm table entries.  The table contains
zero, one, or many rows at any moment, depending upon
the number of alarm conditions in effect.  The table
is initially empty at agent startup.  The agent
creates a row in the table each time a condition is
detected and deletes that row when that condition no
longer pertains.  The agent creates the first row with
rupsAlarmId equal to 1, and increments the value of
rupsAlarmId each time a new row is created, wrapping to
the first free value greater than or equal to 1 when
the maximum value of rupsAlarmId would otherwise be
exceeded.  Consequently, after multiple operations,
the table may become sparse, e.g., containing entries
for rows 95, 100, 101, and 203 and the entries should
not be assumed to be in chronological order because
rupsAlarmId might have wrapped.
          
Alarms are named by an AutonomousType (OBJECT
IDENTIFIER), rupsAlarmDescr, to allow a single table to
reflect well known alarms plus alarms defined by a
particular implementation, i.e., as documented in the
private enterprise MIB definition for the device.  No
two rows will have the same value of rupsAlarmDescr,
since alarms define conditions.  In order to meet this
requirement, care should be taken in the definition of
alarm conditions to insure that a system cannot enter
the same condition multiple times simultaneously.
          
The number of rows in the table at any given time is
reflected by the value of rupsAlarmsPresent.

rupsAlarmEntry row .1.3.6.1.4.1.5491.10.1.6.2.1

An entry containing information applicable to a





particular alarm.

Indexes

rupsAlarmId

Column	Syntax	OID
rupsAlarmId A unique identifier for an alarm condition. This value must remain constant.	PositiveInteger Type Constraints: range: 1..2147483647 Description: This data type is a non-zero and non-negative value.	.1.3.6.1.4.1.5491.10.1.6.2.1.1
rupsAlarmDescr A reference to an alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description of the alarm condition.	ObjectIdentifier	.1.3.6.1.4.1.5491.10.1.6.2.1.2
rupsAlarmTime The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected at the time of agent startup and presumably existed before agent startup, the value of rupsAlarmTime shall equal 0.	PositiveInteger Type Constraints: range: 1..2147483647 Description: This data type is a non-zero and non-negative value.	.1.3.6.1.4.1.5491.10.1.6.2.1.3