RFC1407-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
82

dsx3ConfigTable

table
.1.3.6.1.2.1.10.30.5 · 1 row entry · 18 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk dsx3ConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RFC1407-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RFC1407-MIB::dsx3ConfigTable' 
The DS3/E3 Configuration table.
dsx3ConfigEntry row .1.3.6.1.2.1.10.30.5.1
An entry in the DS3/E3 Configuration table.
Indexes
Column Syntax OID
dsx3LineIndex
This object should be made equal to ifIndex. The
next paragraph describes its previous usage.
Making the object equal to ifIndex allows proper
use of ifStackTable.

Previously, this object was the identif…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.2.1.10.30.5.1.1
dsx3IfIndexdeprecated
This value for this object is equal to the value
of ifIndex from the Interfaces table of MIB II
(RFC 1213).
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.2.1.10.30.5.1.2
dsx3TimeElapsed
The number of seconds that have elapsed since the

beginning of the near end current error-
measurement period. If, for some reason, such as
an adjustment in the system's time-of-day clock,
the current int…
Integer32
Constraints:
range: 0-899
 .1.3.6.1.2.1.10.30.5.1.3
dsx3ValidIntervals
The number of previous near end intervals for
which data was collected. The value will be 96
unless the interface was brought online within the
last 24 hours, in which case the value will be the
number of complete 15 m…
Integer32
Constraints:
range: 0-96
 .1.3.6.1.2.1.10.30.5.1.4
dsx3LineType
This variable indicates the variety of DS3 C-bit
or E3 application implementing this interface. The
type of interface affects the interpretation of
the usage and error statistics. The rate of DS3
is 44.736 Mbps and E3 …
Enumerationr/w
Enumerated Values:
1dsx3other
2dsx3M23
3dsx3SYNTRAN
4dsx3CbitParity
5dsx3ClearChannel
6e3other
7e3Framed
8e3Plcp
9dsx3M13
 .1.3.6.1.2.1.10.30.5.1.5
dsx3LineCoding
This variable describes the variety of Zero Code
Suppression used on this interface, which in turn
affects a number of its characteristics.
dsx3B3ZS and e3HDB3 refer to the use of specified
patterns of normal bits and b…
Enumerationr/w
Enumerated Values:
1dsx3Other
2dsx3B3ZS
3e3HDB3
 .1.3.6.1.2.1.10.30.5.1.6
dsx3SendCode
This variable indicates what type of code is
being sent across the DS3/E3 interface by the
device. (These are optional for E3 interfaces.)
Setting this variable causes the interface to
begin sending the code requested.…
Enumerationr/w
Enumerated Values:
1dsx3SendNoCode
2dsx3SendLineCode
3dsx3SendPayloadCode
4dsx3SendResetCode
5dsx3SendDS1LoopCode
6dsx3SendTestPattern
 .1.3.6.1.2.1.10.30.5.1.7
dsx3CircuitIdentifier
This variable contains the transmission vendor's
circuit identifier, for the purpose of
facilitating troubleshooting.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.2.1.10.30.5.1.8
dsx3LoopbackConfig
This variable represents the desired loopback
configuration of the DS3/E3 interface.
The values mean:

dsx3NoLoop
Not in the loopback state. A device that is
not capable of performing a loopback on
…
Enumerationr/w
Enumerated Values:
1dsx3NoLoop
2dsx3PayloadLoop
3dsx3LineLoop
4dsx3OtherLoop
5dsx3InwardLoop
6dsx3DualLoop
 .1.3.6.1.2.1.10.30.5.1.9
dsx3LineStatus
This variable indicates the Line Status of the
interface. It contains loopback state information
and failure state information. The dsx3LineStatus
is a bit map represented as a sum, therefore, it
can represent multipl…
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.2.1.10.30.5.1.10
dsx3TransmitClockSource
The source of Transmit Clock.

loopTiming indicates that the recovered receive
clock is used as the transmit clock.

localTiming indicates that a local clock source is
used or that an externa…
Enumerationr/w
Enumerated Values:
1loopTiming
2localTiming
3throughTiming
 .1.3.6.1.2.1.10.30.5.1.11
dsx3InvalidIntervals
The number of intervals in the range from 0 to
dsx3ValidIntervals for which no data is available.
This object will typically be zero except in cases
where the data for some intervals are not
available (e.g., in proxy si…
Integer32
Constraints:
range: 0-96
 .1.3.6.1.2.1.10.30.5.1.12
dsx3LineLength
The length of the ds3 line in meters. This
object provides information for line build out
circuitry if it exists and can use this object to
adjust the line build out.
metersInteger32r/w
Constraints:
range: 0-64000
 .1.3.6.1.2.1.10.30.5.1.13
dsx3LineStatusLastChange
The value of MIB II's sysUpTime object at the
time this DS3/E3 entered its current line status
state. If the current state was entered prior to
the last re-initialization of the proxy-agent,
then this object contains a…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.2.1.10.30.5.1.14
dsx3LineStatusChangeTrapEnable
Indicates whether dsx3LineStatusChange traps
should be generated for this interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.2.1.10.30.5.1.15
dsx3LoopbackStatus
This variable represents the current state of the
loopback on the DS3 interface. It contains
information about loopbacks established by a
manager and remotely from the far end.

The dsx3LoopbackStatus is …
Integer32
Constraints:
range: 1-127
 .1.3.6.1.2.1.10.30.5.1.16
dsx3Channelization
Indicates whether this ds3/e3 is channelized or
unchannelized. The value of enabledDs1 indicates

that this is a DS3 channelized into DS1s. The
value of enabledDs3 indicated that this is a DS3
channelize…
Enumerationr/w
Enumerated Values:
1disabled
2enabledDs1
3enabledDs2
 .1.3.6.1.2.1.10.30.5.1.17
dsx3Ds1ForRemoteLoop
Indicates which DS1/E1 on this DS3/E3 will be
indicated in the remote ds1 loopback request. A
value of 0 means no DS1 will be looped. A value
of 29 means all DS1s/E1s will be looped.
Integer32r/w
Constraints:
range: 0-29
 .1.3.6.1.2.1.10.30.5.1.18

dsx3CurrentTable

table
.1.3.6.1.2.1.10.30.6 · 1 row entry · 11 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk dsx3CurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RFC1407-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RFC1407-MIB::dsx3CurrentTable' 
The DS3/E3 current table contains various
statistics being collected for the current 15
minute interval.
dsx3CurrentEntry row .1.3.6.1.2.1.10.30.6.1
An entry in the DS3/E3 Current table.
Indexes
Column Syntax OID
dsx3CurrentIndex
The index value which uniquely identifies the
DS3/E3 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ds…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.2.1.10.30.6.1.1
dsx3CurrentPESs
The counter associated with the number of P-bit
Errored Seconds.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.30.6.1.2
dsx3CurrentPSESs
The counter associated with the number of P-bit
Severely Errored Seconds.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.30.6.1.3
dsx3CurrentSEFSs
The counter associated with the number of
Severely Errored Framing Seconds.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.30.6.1.4
dsx3CurrentUASs
The counter associated with the number of
Unavailable Seconds.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.30.6.1.5
dsx3CurrentLCVs
The counter associated with the number of Line
Coding Violations.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.30.6.1.6
dsx3CurrentPCVs
The counter associated with the number of P-bit
Coding Violations.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.30.6.1.7
dsx3CurrentLESs
The number of Line Errored Seconds.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.30.6.1.8
dsx3CurrentCCVs
The number of C-bit Coding Violations.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.30.6.1.9
dsx3CurrentCESs
The number of C-bit Errored Seconds.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.30.6.1.10
dsx3CurrentCSESs
The number of C-bit Severely Errored Seconds.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.30.6.1.11

dsx3IntervalTable

table
.1.3.6.1.2.1.10.30.7 · 1 row entry · 13 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk dsx3IntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RFC1407-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RFC1407-MIB::dsx3IntervalTable' 
The DS3/E3 Interval Table contains various
statistics collected by each DS3/E3 Interface over
the previous 24 hours of operation.  The past 24
hours are broken into 96 completed 15 minute
intervals.  Each row in this table represents one
such interval (identified by dsx3IntervalNumber)
and for one specific interface (identified by
dsx3IntervalIndex).
dsx3IntervalEntry row .1.3.6.1.2.1.10.30.7.1
An entry in the DS3/E3 Interval table.
Indexes
Column Syntax OID
dsx3IntervalIndex
The index value which uniquely identifies the
DS3/E3 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ds…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.2.1.10.30.7.1.1
dsx3IntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the 15 minutes interval completed 23 hours and 45
minutes prior to interval 1.
Integer32
Constraints:
range: 1-96
 .1.3.6.1.2.1.10.30.7.1.2
dsx3IntervalPESs
The counter associated with the number of P-bit
Errored Seconds.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.30.7.1.3
dsx3IntervalPSESs
The counter associated with the number of P-bit
Severely Errored Seconds.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.30.7.1.4
dsx3IntervalSEFSs
The counter associated with the number of
Severely Errored Framing Seconds.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.30.7.1.5
dsx3IntervalUASs
The counter associated with the number of
Unavailable Seconds. This object may decrease if
the occurrence of unavailable seconds occurs across
an interval boundary.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.30.7.1.6
dsx3IntervalLCVs
The counter associated with the number of Line
Coding Violations.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.30.7.1.7
dsx3IntervalPCVs
The counter associated with the number of P-bit
Coding Violations.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.30.7.1.8
dsx3IntervalLESs
The number of Line Errored Seconds (BPVs or
illegal zero sequences).
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.30.7.1.9
dsx3IntervalCCVs
The number of C-bit Coding Violations.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.30.7.1.10
dsx3IntervalCESs
The number of C-bit Errored Seconds.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.30.7.1.11
dsx3IntervalCSESs
The number of C-bit Severely Errored Seconds.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.30.7.1.12
dsx3IntervalValidData
This variable indicates if the data for this
interval is valid.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.2.1.10.30.7.1.13

dsx3TotalTable

table
.1.3.6.1.2.1.10.30.8 · 1 row entry · 11 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk dsx3TotalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RFC1407-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RFC1407-MIB::dsx3TotalTable' 
The DS3/E3 Total Table contains the cumulative
sum of the various statistics for the 24 hour
period preceding the current interval.
dsx3TotalEntry row .1.3.6.1.2.1.10.30.8.1
An entry in the DS3/E3 Total table.
Indexes
Column Syntax OID
dsx3TotalIndex
The index value which uniquely identifies the
DS3/E3 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ds…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.2.1.10.30.8.1.1
dsx3TotalPESs
The counter associated with the number of P-bit
Errored Seconds, encountered by a DS3 interface in
the previous 24 hour interval. Invalid 15 minute
intervals count as 0.
PerfHist-TC-MIBPerfTotalCount .1.3.6.1.2.1.10.30.8.1.2
dsx3TotalPSESs
The counter associated with the number of P-bit
Severely Errored Seconds, encountered by a DS3
interface in the previous 24 hour interval.
Invalid 15 minute intervals count as 0.
PerfHist-TC-MIBPerfTotalCount .1.3.6.1.2.1.10.30.8.1.3
dsx3TotalSEFSs
The counter associated with the number of
Severely Errored Framing Seconds, encountered by a
DS3/E3 interface in the previous 24 hour interval.
Invalid 15 minute intervals count as 0.
PerfHist-TC-MIBPerfTotalCount .1.3.6.1.2.1.10.30.8.1.4
dsx3TotalUASs
The counter associated with the number of
Unavailable Seconds, encountered by a DS3
interface in the previous 24 hour interval.
Invalid 15 minute intervals count as 0.
PerfHist-TC-MIBPerfTotalCount .1.3.6.1.2.1.10.30.8.1.5
dsx3TotalLCVs
The counter associated with the number of Line
Coding Violations encountered by a DS3/E3
interface in the previous 24 hour interval.
Invalid 15 minute intervals count as 0.
PerfHist-TC-MIBPerfTotalCount .1.3.6.1.2.1.10.30.8.1.6
dsx3TotalPCVs
The counter associated with the number of P-bit

Coding Violations, encountered by a DS3 interface
in the previous 24 hour interval. Invalid 15
minute intervals count as 0.
PerfHist-TC-MIBPerfTotalCount .1.3.6.1.2.1.10.30.8.1.7
dsx3TotalLESs
The number of Line Errored Seconds (BPVs or
illegal zero sequences) encountered by a DS3/E3
interface in the previous 24 hour interval.
Invalid 15 minute intervals count as 0.
PerfHist-TC-MIBPerfTotalCount .1.3.6.1.2.1.10.30.8.1.8
dsx3TotalCCVs
The number of C-bit Coding Violations encountered
by a DS3 interface in the previous 24 hour
interval. Invalid 15 minute intervals count as 0.
PerfHist-TC-MIBPerfTotalCount .1.3.6.1.2.1.10.30.8.1.9
dsx3TotalCESs
The number of C-bit Errored Seconds encountered
by a DS3 interface in the previous 24 hour
interval. Invalid 15 minute intervals count as 0.
PerfHist-TC-MIBPerfTotalCount .1.3.6.1.2.1.10.30.8.1.10
dsx3TotalCSESs
The number of C-bit Severely Errored Seconds
encountered by a DS3 interface in the previous 24
hour interval. Invalid 15 minute intervals count
as 0.
PerfHist-TC-MIBPerfTotalCount .1.3.6.1.2.1.10.30.8.1.11

dsx3FarEndConfigTable

table
.1.3.6.1.2.1.10.30.9 · 1 row entry · 6 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk dsx3FarEndConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RFC1407-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RFC1407-MIB::dsx3FarEndConfigTable' 
The DS3 Far End Configuration Table contains
configuration information reported in the C-bits
from the remote end.
dsx3FarEndConfigEntry row .1.3.6.1.2.1.10.30.9.1
An entry in the DS3 Far End Configuration table.
Indexes
Column Syntax OID
dsx3FarEndLineIndex
The index value which uniquely identifies the DS3
interface to which this entry is applicable. The
interface identified by a particular value of this

index is the same interface as identified by the
same…
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.2.1.10.30.9.1.1
dsx3FarEndEquipCode
This is the Far End Equipment Identification code
that describes the specific piece of equipment.
It is sent within the Path Identification
Message.
OctetStringr/w
Constraints:
range: 0-10
 .1.3.6.1.2.1.10.30.9.1.2
dsx3FarEndLocationIDCode
This is the Far End Location Identification code
that describes the specific location of the
equipment. It is sent within the Path
Identification Message.
OctetStringr/w
Constraints:
range: 0-11
 .1.3.6.1.2.1.10.30.9.1.3
dsx3FarEndFrameIDCode
This is the Far End Frame Identification code
that identifies where the equipment is located
within a building at a given location. It is sent
within the Path Identification Message.
OctetStringr/w
Constraints:
range: 0-10
 .1.3.6.1.2.1.10.30.9.1.4
dsx3FarEndUnitCode
This is the Far End code that identifies the
equipment location within a bay. It is sent
within the Path Identification Message.
OctetStringr/w
Constraints:
range: 0-6
 .1.3.6.1.2.1.10.30.9.1.5
dsx3FarEndFacilityIDCode
This code identifies a specific Far End DS3 path.
It is sent within the Path Identification
Message.
OctetStringr/w
Constraints:
range: 0-38
 .1.3.6.1.2.1.10.30.9.1.6

dsx3FarEndCurrentTable

table
.1.3.6.1.2.1.10.30.10 · 1 row entry · 8 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk dsx3FarEndCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RFC1407-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RFC1407-MIB::dsx3FarEndCurrentTable' 
The DS3 Far End Current table contains various
statistics being collected for the current 15
minute interval.  The statistics are collected
from the far end block error code within the C-
bits.
dsx3FarEndCurrentEntry row .1.3.6.1.2.1.10.30.10.1
An entry in the DS3 Far End Current table.
Indexes
Column Syntax OID
dsx3FarEndCurrentIndex
The index value which uniquely identifies the DS3
interface to which this entry is applicable. The
interface identified by a particular value of this
index is identical to the interface identified by
the same value of …
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.2.1.10.30.10.1.1
dsx3FarEndTimeElapsed
The number of seconds that have elapsed since the
beginning of the far end current error-measurement
period. If, for some reason, such as an adjustment
in the system's time-of-day clock, the current
interval exceeds the…
Integer32
Constraints:
range: 0-899
 .1.3.6.1.2.1.10.30.10.1.2
dsx3FarEndValidIntervals
The number of previous far end intervals for
which data was collected. The value will be 96
unless the interface was brought online within the
last 24 hours, in which case the value will be the
number of complete 15 mi…
Integer32
Constraints:
range: 0-96
 .1.3.6.1.2.1.10.30.10.1.3
dsx3FarEndCurrentCESs
The counter associated with the number of Far End
C-bit Errored Seconds.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.30.10.1.4
dsx3FarEndCurrentCSESs
The counter associated with the number of Far End
C-bit Severely Errored Seconds.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.30.10.1.5
dsx3FarEndCurrentCCVs
The counter associated with the number of Far End
C-bit Coding Violations reported via the far end
block error count.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.30.10.1.6
dsx3FarEndCurrentUASs
The counter associated with the number of Far End
unavailable seconds.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.2.1.10.30.10.1.7
dsx3FarEndInvalidIntervals
The number of intervals in the range from 0 to
dsx3FarEndValidIntervals for which no data is
available. This object will typically be zero
except in cases where the data for some intervals
are not available (e.g., in p…
Integer32
Constraints:
range: 0-96
 .1.3.6.1.2.1.10.30.10.1.8

dsx3FarEndIntervalTable

table
.1.3.6.1.2.1.10.30.11 · 1 row entry · 7 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk dsx3FarEndIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RFC1407-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RFC1407-MIB::dsx3FarEndIntervalTable' 
The DS3 Far End Interval Table contains various
          
statistics collected by each DS3 interface over
the previous 24 hours of operation.  The past 24
hours are broken into 96 completed 15 minute
intervals.
dsx3FarEndIntervalEntry row .1.3.6.1.2.1.10.30.11.1
An entry in the DS3 Far End Interval table.
Indexes
Column Syntax OID
dsx3FarEndIntervalIndex
The index value which uniquely identifies the DS3
interface to which this entry is applicable. The
interface identified by a particular value of this
index is identical to the interface identified by
the same value of …
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.2.1.10.30.11.1.1
dsx3FarEndIntervalNumber
A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is

the 15 minutes interval completed 23 hours and 45
minutes prior to interval 1.
Integer32
Constraints:
range: 1-96
 .1.3.6.1.2.1.10.30.11.1.2
dsx3FarEndIntervalCESs
The counter associated with the number of Far End
C-bit Errored Seconds encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals. In the case where the agent is
a proxy and data is not a…
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.30.11.1.3
dsx3FarEndIntervalCSESs
The counter associated with the number of Far End
C-bit Severely Errored Seconds.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.30.11.1.4
dsx3FarEndIntervalCCVs
The counter associated with the number of Far End
C-bit Coding Violations reported via the far end
block error count.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.30.11.1.5
dsx3FarEndIntervalUASs
The counter associated with the number of Far End
unavailable seconds.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.2.1.10.30.11.1.6
dsx3FarEndIntervalValidData
This variable indicates if the data for this
interval is valid.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.2.1.10.30.11.1.7

dsx3FarEndTotalTable

table
.1.3.6.1.2.1.10.30.12 · 1 row entry · 5 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk dsx3FarEndTotalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RFC1407-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RFC1407-MIB::dsx3FarEndTotalTable' 
The DS3 Far End Total Table contains the
cumulative sum of the various statistics for the
24 hour period preceding the current interval.
dsx3FarEndTotalEntry row .1.3.6.1.2.1.10.30.12.1
An entry in the DS3 Far End Total table.
Indexes
Column Syntax OID
dsx3FarEndTotalIndex
The index value which uniquely identifies the DS3
interface to which this entry is applicable. The
interface identified by a particular value of this
index is identical to the interface identified by
the same value of …
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.2.1.10.30.12.1.1
dsx3FarEndTotalCESs
The counter associated with the number of Far End
C-bit Errored Seconds encountered by a DS3
interface in the previous 24 hour interval.
Invalid 15 minute intervals count as 0.
PerfHist-TC-MIBPerfTotalCount .1.3.6.1.2.1.10.30.12.1.2
dsx3FarEndTotalCSESs
The counter associated with the number of Far End
C-bit Severely Errored Seconds encountered by a
DS3 interface in the previous 24 hour interval.
Invalid 15 minute intervals count as 0.
PerfHist-TC-MIBPerfTotalCount .1.3.6.1.2.1.10.30.12.1.3
dsx3FarEndTotalCCVs
The counter associated with the number of Far End
C-bit Coding Violations reported via the far end
block error count encountered by a DS3 interface
in the previous 24 hour interval. Invalid 15
minute intervals count as …
PerfHist-TC-MIBPerfTotalCount .1.3.6.1.2.1.10.30.12.1.4
dsx3FarEndTotalUASs
The counter associated with the number of Far End
unavailable seconds encountered by a DS3 interface
in the previous 24 hour interval. Invalid 15
minute intervals count as 0.
PerfHist-TC-MIBPerfTotalCount .1.3.6.1.2.1.10.30.12.1.5

dsx3FracTable

table deprecated
.1.3.6.1.2.1.10.30.13 · 1 row entry · 3 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk dsx3FracTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RFC1407-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RFC1407-MIB::dsx3FracTable' 
This table is deprecated in favour of using
ifStackTable.
          
Implementation of this table was optional.  It was
designed for those systems dividing a DS3/E3 into
channels containing different data streams that
are of local interest.
          
The DS3/E3 fractional table identifies which
DS3/E3 channels associated with a CSU are being
used to support a logical interface, i.e., an
entry in the interfaces table from the Internet-
standard MIB.
          
For example, consider a DS3 device with 4 high
speed links carrying router traffic, a feed for
voice, a feed for video, and a synchronous channel
for a non-routed protocol.  We might describe the
allocation of channels, in the dsx3FracTable, as
follows:
dsx3FracIfIndex.2. 1 = 3  dsx3FracIfIndex.2.15 = 4
dsx3FracIfIndex.2. 2 = 3  dsx3FracIfIndex.2.16 = 6
dsx3FracIfIndex.2. 3 = 3  dsx3FracIfIndex.2.17 = 6
dsx3FracIfIndex.2. 4 = 3  dsx3FracIfIndex.2.18 = 6
dsx3FracIfIndex.2. 5 = 3  dsx3FracIfIndex.2.19 = 6
dsx3FracIfIndex.2. 6 = 3  dsx3FracIfIndex.2.20 = 6
dsx3FracIfIndex.2. 7 = 4  dsx3FracIfIndex.2.21 = 6
dsx3FracIfIndex.2. 8 = 4  dsx3FracIfIndex.2.22 = 6
dsx3FracIfIndex.2. 9 = 4  dsx3FracIfIndex.2.23 = 6
dsx3FracIfIndex.2.10 = 4  dsx3FracIfIndex.2.24 = 6
dsx3FracIfIndex.2.11 = 4  dsx3FracIfIndex.2.25 = 6
dsx3FracIfIndex.2.12 = 5  dsx3FracIfIndex.2.26 = 6
dsx3FracIfIndex.2.13 = 5  dsx3FracIfIndex.2.27 = 6
dsx3FracIfIndex.2.14 = 5  dsx3FracIfIndex.2.28 = 6
For dsx3M23, dsx3 SYNTRAN, dsx3CbitParity, and
dsx3ClearChannel  there are 28 legal channels,
numbered 1 through 28.
          
For e3Framed there are 16 legal channels, numbered
1 through 16.  The channels (1..16) correspond
directly to the equivalently numbered time-slots.
dsx3FracEntry row .1.3.6.1.2.1.10.30.13.1
An entry in the DS3 Fractional table.
Indexes
Column Syntax OID
dsx3FracIndexdeprecated
The index value which uniquely identifies the
DS3 interface to which this entry is applicable
The interface identified by a particular value
of this index is the same interface as
identified by the same value an …
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.2.1.10.30.13.1.1
dsx3FracNumberdeprecated
The channel number for this entry.
Integer32
Constraints:
range: 1-31
 .1.3.6.1.2.1.10.30.13.1.2
dsx3FracIfIndexdeprecated
An index value that uniquely identifies an
interface. The interface identified by a
particular value of this index is the same
interface as identified by the same value an

ifIndex object instance. If no…
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.2.1.10.30.13.1.3