RFC1285-MIB Table View

A list of SMT entries.  The number of entries is
given by  the value of snmpFddiSMTNumber.

snmpFddiSMTEntry row .1.3.6.1.2.1.10.15.1.2.1

An SMT entry containing information common to a
given SMT.

Indexes

snmpFddiSMTIndex

Column	Syntax	OID
snmpFddiSMTIndexmandatory A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to …	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.15.1.2.1.1
snmpFddiSMTStationIdmandatory Uniquely identifies an FDDI station.	FddiSMTStationIdType Type Constraints: range: 8	.1.3.6.1.2.1.10.15.1.2.1.2
snmpFddiSMTOpVersionIdmandatory The version that this station is using for its operation (refer to ANSI 7.1.2.2).	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.10.15.1.2.1.3
snmpFddiSMTHiVersionIdmandatory The highest version of SMT that this station supports (refer to ANSI 7.1.2.2).	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.15.1.2.1.4
snmpFddiSMTLoVersionIdmandatory The lowest version of SMT that this station supports (refer to ANSI 7.1.2.2).	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.15.1.2.1.5
snmpFddiSMTMACCtmandatory The number of MACs in the station or concentrator.	Integer32 Constraints: range: 0-255	.1.3.6.1.2.1.10.15.1.2.1.6
snmpFddiSMTNonMasterCtmandatory The number of Non Master PORTs (A, B, or S PORTs) in the station or concentrator.	Integer32 Constraints: range: 0-2	.1.3.6.1.2.1.10.15.1.2.1.7
snmpFddiSMTMasterCtmandatory The number of Master PORTs in a node. If the node is not a concentrator, the value is zero.	Integer32 Constraints: range: 0-255	.1.3.6.1.2.1.10.15.1.2.1.8
snmpFddiSMTPathsAvailablemandatory A value that indicates the PATH types available in the station. The value is a sum. This value initially takes the value zero, then for each type of PATH that this node has available, 2 raised to a power…	Integer32 Constraints: range: 0-7	.1.3.6.1.2.1.10.15.1.2.1.9
snmpFddiSMTConfigCapabilitiesmandatory A value that indicates capabilities that are present in the node. If 'holdAvailable' is present, this indicates support of the optional Hold Function (refer to ANSI SMT 9.4.3.2). If 'CF-Wrap-AB' is present, this indic…	Integer32 Constraints: range: 0-3	.1.3.6.1.2.1.10.15.1.2.1.10
snmpFddiSMTConfigPolicymandatory A value that indicates the configuration policies currently enforced in the node (refer to ANSI SMT 9.4.3.2). The 'configurationHold' policy refers to the Hold flag, and should not be present only if the Hold function …	Integer32r/w Constraints: range: 0-3	.1.3.6.1.2.1.10.15.1.2.1.11
snmpFddiSMTConnectionPolicymandatory A value that indicates the connection policies enforced at the station. A station sets the corresponding policy for each of the connection types that it rejects. The letter designations, X and Y, in the 'rejectX-Y' na…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.10.15.1.2.1.12
snmpFddiSMTTNotifymandatory The timer used in the Neighbor Notification protocol, reported in seconds and ranging from 2 to 30 seconds (refer to ANSI SMT 8.3.1).	Integer32r/w Constraints: range: 2-30	.1.3.6.1.2.1.10.15.1.2.1.13
snmpFddiSMTStatusReportingmandatory Indicates whether the node implements the Status Reporting Protocol. This object is included for compatibility with products that were designed prior to the adoption of this standard.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.2.1.10.15.1.2.1.14
snmpFddiSMTECMStatemandatory Indicates the current state of the ECM state machine (refer to ANSI SMT 9.5.2).	Enumeration Enumerated Values: 1 ec0 2 ec1 3 ec2 4 ec3 5 ec4 6 ec5 7 ec6 8 ec7	.1.3.6.1.2.1.10.15.1.2.1.15
snmpFddiSMTCFStatemandatory The attachment configuration for the station or concentrator (refer to ANSI SMT 9.7.4.3).	Enumeration Enumerated Values: 1 cf0 2 cf1 3 cf2 4 cf3 5 cf4 6 cf5	.1.3.6.1.2.1.10.15.1.2.1.16
snmpFddiSMTHoldStatemandatory This value indicates the current state of the Hold function. The values are determined as follows: 'holding-prm' is set if the primary ring is operational and the Recovery Enable Flag is clear (NOT NO_Flag(primary) AN…	Enumeration Enumerated Values: 1 not-implemented 2 not-holding 3 holding-prm 4 holding-sec	.1.3.6.1.2.1.10.15.1.2.1.17
snmpFddiSMTRemoteDisconnectFlagmandatory A flag indicating that the station was remotely disconnected from the network. A station requires a Connect Action (SM_CM_CONNECT.request (Connect)) to rejoin and clear the flag (refer to ANSI …	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.2.1.10.15.1.2.1.18
snmpFddiSMTStationActionmandatory This object, when read, always returns a value of other(1). The behavior of setting this variable to each of the acceptable values is as follows: Other: Results in a badValue error. …	Enumerationr/w Enumerated Values: 1 other 2 connect 3 disconnect 4 path-Test 5 self-Test	.1.3.6.1.2.1.10.15.1.2.1.19

A list of MAC entries.  The number of entries is
given by the value of snmpFddiMACNumber.

snmpFddiMACEntry row .1.3.6.1.2.1.10.15.2.2.1

A MAC entry containing information common to a
given MAC.

Indexes

snmpFddiMACSMTIndex snmpFddiMACIndex

Column	Syntax	OID
snmpFddiMACSMTIndexmandatory The value of the SMT index associated with this MAC.	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.15.2.2.1.1
snmpFddiMACIndexmandatory A unique value for each MAC on the managed entity. The MAC identified by a particular value of this index is that identified by the same value of an ifIndex object instance. That is, if a MAC is associated with the in…	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.15.2.2.1.2
snmpFddiMACFrameStatusCapabilitiesmandatory A value that indicates the MAC's bridge and end- station capabilities for operating in a bridged FDDI network. The value is a sum. This value i…	Integer32 Constraints: range: 0-1799	.1.3.6.1.2.1.10.15.2.2.1.3
snmpFddiMACTMaxGreatestLowerBoundmandatory The greatest lower bound of T_Max supported for this MAC.	FddiTimer/w Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.15.2.2.1.4
snmpFddiMACTVXGreatestLowerBoundmandatory The greatest lower bound of TVX supported for this MAC.	FddiTime Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.15.2.2.1.5
snmpFddiMACPathsAvailablemandatory A value that indicates the PATH types available for this MAC. The value is a sum. This value initially takes the value zero, then for each type of PATH that this MAC has available, 2 raised to a power is…	Integer32 Constraints: range: 0-7	.1.3.6.1.2.1.10.15.2.2.1.6
snmpFddiMACCurrentPathmandatory Indicates the association of the MAC with a station PATH.	Enumeration Enumerated Values: 1 unknown 2 primary 4 secondary 8 local 16 isolated	.1.3.6.1.2.1.10.15.2.2.1.7
snmpFddiMACUpstreamNbrmandatory The MAC's upstream neighbor's long individual MAC address. It may be determined by the Neighbor Information Frame protocol (refer to ANSI SMT 7.2.1). The value shall be reported as '00 00 00 00 00 00' if it is unknown.	FddiMACLongAddressType Type Constraints: range: 6	.1.3.6.1.2.1.10.15.2.2.1.8
snmpFddiMACOldUpstreamNbrmandatory The previous value of the MAC's upstream neighbor's long individual MAC address. It may be determined by the Neighbor Information Frame protocol (refer to ANSI SMT 7.2.1). The value shall be reported as '00 00 00 00 0…	FddiMACLongAddressType Type Constraints: range: 6	.1.3.6.1.2.1.10.15.2.2.1.9
snmpFddiMACDupAddrTestmandatory The Duplicate Address Test flag, Dup_Addr_Test (refer to ANSI 8.3.1).	Enumeration Enumerated Values: 1 none 2 pass 3 fail	.1.3.6.1.2.1.10.15.2.2.1.10
snmpFddiMACPathsRequestedmandatory A value that indicates PATH(s) desired for this MAC. The value is a sum which represents the individual PATHs that are desired. This value initially …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.10.15.2.2.1.11
snmpFddiMACDownstreamPORTTypemandatory Indicates the PC-Type of the first port that is downstream of this MAC (the exit port).	Enumeration Enumerated Values: 1 a 2 b 3 s 4 m 5 unknown	.1.3.6.1.2.1.10.15.2.2.1.12
snmpFddiMACSMTAddressmandatory The 48 bit individual address of the MAC used for SMT frames.	FddiMACLongAddressType Type Constraints: range: 6	.1.3.6.1.2.1.10.15.2.2.1.13
snmpFddiMACTReqmandatory The value of T-Req (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2).	FddiTimer/w Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.15.2.2.1.14
snmpFddiMACTNegmandatory The value of T-Neg (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2).	FddiTime Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.15.2.2.1.15
snmpFddiMACTMaxmandatory The value of T-Max (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2).	FddiTime Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.15.2.2.1.16
snmpFddiMACTvxValuemandatory The value of TvxValue (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2).	FddiTime Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.15.2.2.1.17
snmpFddiMACTMinmandatory The value of T-Min (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2).	FddiTime Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.15.2.2.1.18
snmpFddiMACCurrentFrameStatusmandatory A value that indicates the MAC's operational frame status setting functionality. The value is a sum. This value initially takes the value zero, then for each functionality present, 2 raised to a power is…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.2.1.10.15.2.2.1.19
snmpFddiMACFrameCtsmandatory Frame_Ct (refer to ANSI MAC 2.2.1).	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.15.2.2.1.20
snmpFddiMACErrorCtsmandatory Error_Ct (refer to ANSI MAC 2.2.1).	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.15.2.2.1.21
snmpFddiMACLostCtsmandatory Lost_Ct (refer to ANSI MAC 2.2.1).	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.15.2.2.1.22
snmpFddiMACFrameErrorThresholdmandatory A threshold for determining when a MAC Condition report should be generated. The condition is true when the ratio, ((delta snmpFddiMACLostCt + delta snmpFddiMACErrorCt) / (delta snmpFddiMACFrameCt + delta snmpFddiMACLo…	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.15.2.2.1.23
snmpFddiMACFrameErrorRatiomandatory This attribute is the actual ratio, ((delta snmpFddiMACLostCt + delta snmpFddiMACErrorCt) / (delta snmpFddiMACFrameCt + delta snmpFddiMACLostCt)) x 2**16.	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.15.2.2.1.24
snmpFddiMACRMTStatemandatory Indicates the current state of the Ring Management state machine (refer to ANSI Section 10).	Enumeration Enumerated Values: 1 rm0 2 rm1 3 rm2 4 rm3 5 rm4 6 rm5 7 rm6 8 rm7	.1.3.6.1.2.1.10.15.2.2.1.25
snmpFddiMACDaFlagmandatory The RMT flag Duplicate Address Flag, DA_Flag (refer to ANSI 10.3.1.2).	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.2.1.10.15.2.2.1.26
snmpFddiMACUnaDaFlagmandatory A flag set when the upstream neighbor reports a duplicate address condition. Reset when the condition clears.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.2.1.10.15.2.2.1.27
snmpFddiMACFrameConditionmandatory Indicates the MAC Condition is active when set. Cleared when the condition clears and on power up.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.2.1.10.15.2.2.1.28
snmpFddiMACChipSetmandatory This object identifies the hardware chip(s) which is (are) principally responsible for the implementation of the MAC function. A few OBJECT IDENTIFIERS are identified elsewhere in this memo. For those The assignment of…	ObjectIdentifier	.1.3.6.1.2.1.10.15.2.2.1.29
snmpFddiMACActionmandatory This object, when read, always returns a value of other(1). The behavior of setting this variable to each of the acceptable values is as follows: Other: Results in a badValue …	Enumerationr/w Enumerated Values: 1 other 2 enableLLCService 3 disableLLCService 4 connectMAC 5 disconnectMAC	.1.3.6.1.2.1.10.15.2.2.1.30

A list of PORT entries.  The number of entries is
given by the value of snmpFddiPORTNumber.

snmpFddiPORTEntry row .1.3.6.1.2.1.10.15.4.2.1

A PORT entry containing information common to a
given PORT.

Indexes

snmpFddiPORTSMTIndex snmpFddiPORTIndex

Column	Syntax	OID
snmpFddiPORTSMTIndexmandatory The value of the SMT index associated with this PORT.	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.15.4.2.1.1
snmpFddiPORTIndexmandatory A unique value for each PORT within a given SMT. Its value ranges between 1 and the sum of the values of snmpFddiSMTNonMasterCt { snmpFddiSMTEntry 6 } and snmpFddiSMTMasterCt { snmpFddiSMTEntry 7 } on the given SMT. Th…	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.15.4.2.1.2
snmpFddiPORTPCTypemandatory PC_Type (refer to ANSI SMT 9.2.2 and ANSI SMT 9.6.3.2).	Enumeration Enumerated Values: 1 a 2 b 3 s 4 m	.1.3.6.1.2.1.10.15.4.2.1.3
snmpFddiPORTPCNeighbormandatory The type (PC_Neighbor) of the remote PORT that is determined in PC_Signaling in R_Val (1,2) (refer to ANSI SMT 9.6.3.2).	Enumeration Enumerated Values: 1 a 2 b 3 s 4 m 5 unknown	.1.3.6.1.2.1.10.15.4.2.1.4
snmpFddiPORTConnectionPoliciesmandatory A value that indicates the node's PORT policies. Pc-MAC-LCT, Pc-MAC-Loop, and Pc-MAC-Placement indicate how the respective PC Signaling Capabili…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.2.1.10.15.4.2.1.5
snmpFddiPORTRemoteMACIndicatedmandatory The indication, in PC-Signaling that the remote partner intends to place a MAC in the output token PATH of this PORT. Signaled as R_Val (9) (refer to ANSI SMT 9.6.3.2).	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.2.1.10.15.4.2.1.6
snmpFddiPORTCEStatemandatory Indicates the current state of PORT's Configuration Element (CE) (refer to ANSI 9.7.5). Note that this value represents the Current Path information for this PORT.	Enumeration Enumerated Values: 1 ce0 2 ce1 3 ce2 4 ce3 5 ce4	.1.3.6.1.2.1.10.15.4.2.1.7
snmpFddiPORTPathsRequestedmandatory A value that indicates the desired association(s) of the port with a station PATH. The 'Primary' Path is the default. The value of 'Secondary' is only meaningful for S (slave) or M (master) PORT PC-Types. This value …	Integer32r/w Constraints: range: 0-15	.1.3.6.1.2.1.10.15.4.2.1.8
snmpFddiPORTMACPlacementmandatory Indicates the upstream MAC, if any, that is associated with the PORT. The value shall be zero if there is no MAC associated with the PORT. Otherwise, the value shall be equal to the value of snmpFddiMACIndex associated…	FddiResourceId Type Constraints: range: 0..65535	.1.3.6.1.2.1.10.15.4.2.1.9
snmpFddiPORTAvailablePathsmandatory A value that indicates the PATH types available for M and S PORTs. The value is a sum. This value initially takes the value zero, then for each type of PATH that this port has available, 2 raised to a po…	Integer32 Constraints: range: 0-7	.1.3.6.1.2.1.10.15.4.2.1.10
snmpFddiPORTMACLoopTimemandatory Time for the optional MAC Local Loop, T_Next(9), which is greater-than or equal-to 200 milliseconds (refer to ANSI SMT 9.4.4.2.3).	FddiTimer/w Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.15.4.2.1.11
snmpFddiPORTTBMaxmandatory TB_Max (refer to ANSI SMT 9.4.4.2.1).	FddiTimer/w Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.15.4.2.1.12
snmpFddiPORTBSFlagmandatory The Break State, BS_Flag (refer to ANSI SMT 9.4.3.4).	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.2.1.10.15.4.2.1.13
snmpFddiPORTLCTFailCtsmandatory The count of the consecutive times the link confidence test (LCT) has failed during connection management (refer to ANSI 9.4.1).	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.15.4.2.1.14
snmpFddiPORTLerEstimatemandatory A long term average link error rate. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the exponent of the estimate.	Integer32 Constraints: range: 4-15	.1.3.6.1.2.1.10.15.4.2.1.15
snmpFddiPORTLemRejectCtsmandatory A link error monitoring count of the times that a link has been rejected.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.15.4.2.1.16
snmpFddiPORTLemCtsmandatory The aggregate link error monitor error count, set to zero only on station power_up.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.15.4.2.1.17
snmpFddiPORTLerCutoffmandatory The link error rate estimate at which a link connection will be broken. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the exponent.	Integer32r/w Constraints: range: 4-15	.1.3.6.1.2.1.10.15.4.2.1.18
snmpFddiPORTLerAlarmmandatory The link error rate estimate at which a link connection will generate an alarm. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the exponent of the estimate.	Integer32r/w Constraints: range: 4-15	.1.3.6.1.2.1.10.15.4.2.1.19
snmpFddiPORTConnectStatemandatory An indication of the connect state of this PORT. Basically, this gives a higher level view of the state of the connection by grouping PCM states and the PC-Withhold flag state. The supported values and their correspond…	Enumeration Enumerated Values: 1 disabled 2 connecting 3 standby 4 active	.1.3.6.1.2.1.10.15.4.2.1.20
snmpFddiPORTPCMStatemandatory (refer to SMT 9.6.2).	Enumeration Enumerated Values: 1 pc0 2 pc1 3 pc2 4 pc3 5 pc4 6 pc5 7 pc6 8 pc7 9 pc8 10 pc9	.1.3.6.1.2.1.10.15.4.2.1.21
snmpFddiPORTPCWithholdmandatory PC_Withhold, (refer to ANSI SMT 9.4.1).	Enumeration Enumerated Values: 1 none 2 m-m 3 other	.1.3.6.1.2.1.10.15.4.2.1.22
snmpFddiPORTLerConditionmandatory This variable is set to true whenever LerEstimate is less than or equal to LerAlarm.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.2.1.10.15.4.2.1.23
snmpFddiPORTChipSetmandatory This object identifies the hardware chip(s) which is (are) principally responsible for the implementation of the PORT (PHY) function. A few OBJECT IDENTIFIERS are identified elsewhere in this memo. For those The assig…	ObjectIdentifier	.1.3.6.1.2.1.10.15.4.2.1.24
snmpFddiPORTActionmandatory This object, when read, always returns a value of other(1). The behavior of setting this variable to each of the acceptable values is as follows: Other: Results in a badValue error. …	Enumerationr/w Enumerated Values: 1 other 2 maintPORT 3 enablePORT 4 disablePORT 5 startPORT 6 stopPORT	.1.3.6.1.2.1.10.15.4.2.1.25

A list of ATTACHMENT entries.  The number of
entries is given by the value of
snmpFddiATTACHMENTNumber.

snmpFddiATTACHMENTEntry row .1.3.6.1.2.1.10.15.5.2.1

An ATTACHMENT entry containing information common
to a given set of ATTACHMENTs.

The ATTACHMENT Resource represents a PORT or a
pair of PORTs plus the optional associated optical
bypass that are managed as …

Indexes

snmpFddiATTACHMENTSMTIndex snmpFddiATTACHMENTIndex

Column	Syntax	OID
snmpFddiATTACHMENTSMTIndexmandatory The value of the SMT index associated with this ATTACHMENT.	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.15.5.2.1.1
snmpFddiATTACHMENTIndexmandatory A unique value for each ATTACHMENT on a given SMT. Its value ranges between 1 and the sum of the values of snmpFddiSMTNonMasterCt { snmpFddiSMTEntry 6 } and snmpFddiSMTMasterCt { snmpFddiSMTEntry 7 } on the given SMT. …	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.15.5.2.1.2
snmpFddiATTACHMENTClassmandatory The Attachment class. This represents a PORT or a pair of PORTs plus the associated optional optical bypass that are managed as a functional unit. The PORT associations are the following: single-at…	Enumeration Enumerated Values: 1 single-attachment 2 dual-attachment 3 concentrator	.1.3.6.1.2.1.10.15.5.2.1.3
snmpFddiATTACHMENTOpticalBypassPresentmandatory The value of this value is false for 'single- attachment' and { snmpFddiATTACHMENT 11 }. Correct operation of CMT for single-attachment and concentrator attachments requires that a bypass function must not loopback the …	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.2.1.10.15.5.2.1.4
snmpFddiATTACHMENTIMaxExpirationmandatory I_Max (refer to ANSI SMT 9.4.4.2.1). It is recognized that some currently deployed systems do not implement an optical bypass. Systems which do not implement optical bypass should return a value of 0.	FddiTime Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.10.15.5.2.1.5
snmpFddiATTACHMENTInsertedStatusmandatory Indicates whether the attachment is currently inserted in the node.	Enumeration Enumerated Values: 1 true 2 false 3 unimplemented	.1.3.6.1.2.1.10.15.5.2.1.6
snmpFddiATTACHMENTInsertPolicymandatory Indicates the Insert Policy for this Attachment. Insert: True (1), Don't Insert: False (2), Unimplemented (3)	Enumerationr/w Enumerated Values: 1 true 2 false 3 unimplemented	.1.3.6.1.2.1.10.15.5.2.1.7