RFC1253-MIB Table View

Information describing the configured parameters and
cumulative statistics of the router's attached areas.

ospfAreaEntry row .1.3.6.1.2.1.14.2.1

Information describing the configured parameters and
cumulative statistics of one of the router's attached
areas.

Indexes

ospfAreaId

Column	Syntax	OID
ospfAreaIdmandatory A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.	AreaIDr/w	.1.3.6.1.2.1.14.2.1.1
ospfAuthTypemandatory The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.14.2.1.2
ospfImportASExternmandatory The area's support for importing AS external link- state advertisements.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.2.1.14.2.1.3
ospfSpfRunsmandatory The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.14.2.1.4
ospfAreaBdrRtrCountmandatory The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.14.2.1.5
ospfASBdrRtrCountmandatory The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.14.2.1.6
ospfAreaLSACountmandatory The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's.	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.14.2.1.7
ospfAreaLSACksumSummandatory The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine i…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.14.2.1.8

The set of metrics that will be advertised by a
default Area Border Router into a stub area.

ospfStubAreaEntry row .1.3.6.1.2.1.14.3.1

The metric for a given Type of Service that will be
advertised by a default Area Border Router into a stub
area.

Indexes

ospfStubAreaID ospfStubTOS

Column	Syntax	OID
ospfStubAreaIDmandatory The 32 bit identifier for the Stub Area. On creation, this can be derived from the instance.	AreaIDr/w	.1.3.6.1.2.1.14.3.1.1
ospfStubTOSmandatory The Type of Service associated with the metric. On creation, this can be derived from the instance.	TOSTyper/w Type Constraints: range: 0..31	.1.3.6.1.2.1.14.3.1.2
ospfStubMetricmandatory The metric value applied at the indicated type of service. By default, this equals the least metric at the type of service among the interfaces to other areas.	BigMetricr/w Type Constraints: range: 1..16777215	.1.3.6.1.2.1.14.3.1.3
ospfStubStatusmandatory This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The intern…	Validationr/w Type Values: 1 valid 2 invalid	.1.3.6.1.2.1.14.3.1.4

The OSPF Process's Links State Database.

ospfLsdbEntry row .1.3.6.1.2.1.14.4.1

A single Link State Advertisement.

Indexes

ospfLsdbAreaId ospfLsdbType ospfLsdbLSID ospfLsdbRouterId

Column	Syntax	OID
ospfLsdbAreaIdmandatory The 32 bit identifier of the Area from which the LSA was received.	AreaID	.1.3.6.1.2.1.14.4.1.1
ospfLsdbTypemandatory The type of the link state advertisement. Each link state type has a separate advertisement format.	Enumeration Enumerated Values: 1 routerLink 2 networkLink 3 summaryLink 4 asSummaryLink 5 asExternalLink	.1.3.6.1.2.1.14.4.1.2
ospfLsdbLSIDmandatory The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.14.4.1.3
ospfLsdbRouterIdmandatory The 32 bit number that uniquely identifies the originating router in the Autonomous System.	RouterID	.1.3.6.1.2.1.14.4.1.4
ospfLsdbSequencemandatory The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.14.4.1.5
ospfLsdbAgemandatory This field is the age of the link state advertisement in seconds.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.14.4.1.6
ospfLsdbChecksummandatory This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an adverti…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.14.4.1.7
ospfLsdbAdvertisementmandatory The entire Link State Advertisement, including its header.	OctetString	.1.3.6.1.2.1.14.4.1.8

A range if IP addresses specified by an IP address/IP
network mask pair.  For example, class B address range
of X.X.X.X with a network mask of 255.255.0.0 includes
all IP addresses from X.X.0.0 to X.X.255.255

ospfAreaRangeEntry row .1.3.6.1.2.1.14.5.1

A range if IP addresses specified by an IP address/IP





network mask pair. For example, class B address range
of X.X.X.X with a network mask of 255.255.0.0…

Indexes

ospfAreaRangeAreaID ospfAreaRangeNet

Column	Syntax	OID
ospfAreaRangeAreaIDmandatory The Area the Address Range is to be found within.	AreaIDr/w	.1.3.6.1.2.1.14.5.1.1
ospfAreaRangeNetmandatory The IP Address of the Net or Subnet indicated by the range.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.2.1.14.5.1.2
ospfAreaRangeMaskmandatory The Subnet Mask that pertains to the Net or Subnet.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.2.1.14.5.1.3
ospfAreaRangeStatusmandatory This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	Validationr/w Type Values: 1 valid 2 invalid	.1.3.6.1.2.1.14.5.1.4

The list of Hosts, and their metrics, that the router
will advertise as host routes.

ospfHostEntry row .1.3.6.1.2.1.14.6.1

A metric to be advertised, for a given type of service,
when a given host is reachable.

Indexes

ospfHostIpAddress ospfHostTOS

Column	Syntax	OID
ospfHostIpAddressmandatory The IP Address of the Host.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.2.1.14.6.1.1
ospfHostTOSmandatory The Type of Service of the route being configured.	TOSTyper/w Type Constraints: range: 0..31	.1.3.6.1.2.1.14.6.1.2
ospfHostMetricmandatory The Metric to be advertised.	Metricr/w Type Constraints: range: 1..65535	.1.3.6.1.2.1.14.6.1.3
ospfHostStatusmandatory This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	Validationr/w Type Values: 1 valid 2 invalid	.1.3.6.1.2.1.14.6.1.4

The OSPF Interface Table describes the interfaces from
the viewpoint of OSPF.

ospfIfEntry row .1.3.6.1.2.1.14.7.1

The OSPF Interface Entry describes one interface from
the viewpoint of OSPF.

Indexes

ospfIfIpAddress ospfAddressLessIf

Column	Syntax	OID
ospfIfIpAddressmandatory The IP address of this OSPF interface.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.2.1.14.7.1.1
ospfAddressLessIfmandatory For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Addre…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.14.7.1.2
ospfIfAreaIdmandatory A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.	AreaIDr/w	.1.3.6.1.2.1.14.7.1.3
ospfIfTypemandatory The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25, Frame R…	Enumerationr/w Enumerated Values: 1 broadcast 2 nbma 3 pointToPoint	.1.3.6.1.2.1.14.7.1.4
ospfIfAdminStatmandatory The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'di…	Statusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.2.1.14.7.1.5
ospfIfRtrPrioritymandatory The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on t…	DesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.14.7.1.6
ospfIfTransitDelaymandatory The estimated number of seconds it takes to transmit a link- state update packet over this interface.	UpToMaxAger/w Type Constraints: range: 1..3600	.1.3.6.1.2.1.14.7.1.7
ospfIfRetransIntervalmandatory The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets.	UpToMaxAger/w Type Constraints: range: 1..3600	.1.3.6.1.2.1.14.7.1.8
ospfIfHelloIntervalmandatory The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.	HelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.2.1.14.7.1.9
ospfIfRtrDeadIntervalmandatory The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers att…	PositiveIntegerr/w Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.14.7.1.10
ospfIfPollIntervalmandatory The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi- access neighbor.	PositiveIntegerr/w Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.14.7.1.11
ospfIfStatemandatory The OSPF Interface State.	Enumeration Enumerated Values: 1 down 2 loopback 3 waiting 4 pointToPoint 5 designatedRouter 6 backupDesignatedRouter 7 otherDesignatedRouter	.1.3.6.1.2.1.14.7.1.12
ospfIfDesignatedRoutermandatory The IP Address of the Designated Router.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.14.7.1.13
ospfIfBackupDesignatedRoutermandatory The IP Address of the Backup Designated Router.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.14.7.1.14
ospfIfEventsmandatory The number of times this OSPF interface has changed its state, or an error has occurred.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.14.7.1.15
ospfIfAuthKeymandatory The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, ospfIfAuthKey alw…	OctetStringr/w	.1.3.6.1.2.1.14.7.1.16

The TOS metrics for a non-virtual interface identified
by the interface index.

ospfIfMetricEntry row .1.3.6.1.2.1.14.8.1

A particular TOS metric for a non-virtual interface
identified by the interface index.

Indexes

ospfIfMetricIpAddress ospfIfMetricAddressLessIf ospfIfMetricTOS

Column	Syntax	OID
ospfIfMetricIpAddressmandatory The IP address of this OSPF interface. On row creation, this can be derived from the instance.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.2.1.14.8.1.1
ospfIfMetricAddressLessIfmandatory For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for interfaces having no IP Address. On row cr…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.14.8.1.2
ospfIfMetricTOSmandatory The type of service metric being referenced. On row creation, this can be derived from the instance.	TOSTyper/w Type Constraints: range: 0..31	.1.3.6.1.2.1.14.8.1.3
ospfIfMetricMetricmandatory The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. The value FFFF is distinguished to mean 'no route via this TOS'.	Metricr/w Type Constraints: range: 1..65535	.1.3.6.1.2.1.14.8.1.4
ospfIfMetricStatusmandatory This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	Validationr/w Type Values: 1 valid 2 invalid	.1.3.6.1.2.1.14.8.1.5

Information about this router's virtual interfaces.

ospfVirtIfEntry row .1.3.6.1.2.1.14.9.1

Information about a single Virtual Interface.

Indexes

ospfVirtIfAreaID ospfVirtIfNeighbor

Column	Syntax	OID
ospfVirtIfAreaIDmandatory The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0	AreaIDr/w	.1.3.6.1.2.1.14.9.1.1
ospfVirtIfNeighbormandatory The Router ID of the Virtual Neighbor.	RouterIDr/w	.1.3.6.1.2.1.14.9.1.2
ospfVirtIfTransitDelaymandatory The estimated number of seconds it takes to transmit a link- state update packet over this interface.	UpToMaxAger/w Type Constraints: range: 1..3600	.1.3.6.1.2.1.14.9.1.3
ospfVirtIfRetransIntervalmandatory The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used wh…	UpToMaxAger/w Type Constraints: range: 1..3600	.1.3.6.1.2.1.14.9.1.4
ospfVirtIfHelloIntervalmandatory The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.	HelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.2.1.14.9.1.5
ospfVirtIfRtrDeadIntervalmandatory The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual nei…	PositiveIntegerr/w Type Constraints: range: 1..4294967295	.1.3.6.1.2.1.14.9.1.6
ospfVirtIfStatemandatory OSPF virtual interface states.	Enumeration Enumerated Values: 1 down 4 pointToPoint	.1.3.6.1.2.1.14.9.1.7
ospfVirtIfEventsmandatory The number of state changes or error events on this Virtual Link	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.14.9.1.8
ospfVirtIfAuthKeymandatory If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, ospfVifAuthKey always returns a string of length zero.	OctetStringr/w	.1.3.6.1.2.1.14.9.1.9
ospfVirtIfStatusmandatory This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	Validationr/w Type Values: 1 valid 2 invalid	.1.3.6.1.2.1.14.9.1.10

A table of non-virtual neighbor information.

ospfNbrEntry row .1.3.6.1.2.1.14.10.1

The information regarding a single neighbor.

Indexes

ospfNbrIpAddr ospfNbrAddressLessIndex

Column	Syntax	OID
ospfNbrIpAddrmandatory The IP address of this neighbor.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.2.1.14.10.1.1
ospfNbrAddressLessIndexmandatory On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.	InterfaceIndexr/w	.1.3.6.1.2.1.14.10.1.2
ospfNbrRtrIdmandatory A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.	RouterID	.1.3.6.1.2.1.14.10.1.3
ospfNbrOptionsmandatory A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is a stub area. Bit 1, if set, ind…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.14.10.1.4
ospfNbrPrioritymandatory The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.	DesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.14.10.1.5
ospfNbrStatemandatory The State of the relationship with this Neighbor.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full	.1.3.6.1.2.1.14.10.1.6
ospfNbrEventsmandatory The number of times this neighbor relationship has changed state, or an error has occurred.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.14.10.1.7
ospfNbrLSRetransQLenmandatory The current length of the retransmission queue.	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.14.10.1.8
ospfNBMANbrStatusmandatory This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The intern…	Validationr/w Type Values: 1 valid 2 invalid	.1.3.6.1.2.1.14.10.1.9

A table of virtual neighbor information.

ospfVirtNbrEntry row .1.3.6.1.2.1.14.11.1

Virtual neighbor information.

Indexes

ospfVirtNbrArea ospfVirtNbrRtrId

Column	Syntax	OID
ospfVirtNbrAreamandatory The Transit Area Identifier.	AreaID	.1.3.6.1.2.1.14.11.1.1
ospfVirtNbrRtrIdmandatory A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.	RouterID	.1.3.6.1.2.1.14.11.1.2
ospfVirtNbrIpAddrmandatory The IP address this Virtual Neighbor is using.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.2.1.14.11.1.3
ospfVirtNbrOptionsmandatory A bit map corresponding to the neighbor's options field. Thus, Bit 1, if set, indicates that the neighbor supports Type of Service Routing; if zero, no metrics other than TOS 0 are in use by the neighbor.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.14.11.1.4
ospfVirtNbrStatemandatory The state of the Virtual Neighbor Relationship.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full	.1.3.6.1.2.1.14.11.1.5
ospfVirtNbrEventsmandatory The number of times this virtual link has changed its state, or an error has occurred.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.14.11.1.6
ospfVirtNbrLSRetransQLenmandatory The current length of the retransmission queue.	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.14.11.1.7