REDLINE-AN80I-IF-MIB Table View

This table contains the PMP link configuration information.

an80iIfPmpLinkConfigEntry row .1.3.6.1.4.1.10728.2.10.2.2.2.1

This table provides one row for each PMP link that has been
configured in the SC.

Indexes

an80iIfPmpLinkId

Column	Syntax	OID
an80iIfPmpLinkId The PMP Link Identifier.	Integer32 Constraints: range: 4-1023	.1.3.6.1.4.1.10728.2.10.2.2.2.1.1
an80iIfPmpLinkName The PMP Link Name.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.10728.2.10.2.2.2.1.2
an80iIfPmpLinkPeerMacAddress The MAC address for the peer SS	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10728.2.10.2.2.2.1.3
an80iIfPmpLinkULBurstRate User supplied index of the uplink uncoded burst rate.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10728.2.10.2.2.2.1.4
an80iIfPmpLinkDLBurstRate User supplied index of the downlink uncoded burst rate.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10728.2.10.2.2.2.1.5
an80iIfPmpLinkConfigStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10728.2.10.2.2.2.1.6

This table contains the PMP link statistics information.

an80iIfPmpLinkStatsEntry row .1.3.6.1.4.1.10728.2.10.2.2.3.1

This table provides one row for each PMP link that has been
configured in the Service Controller.

Indexes

an80iIfPmpLinkId

Column	Syntax	OID
an80iIfPmpLinkStatus Indicates if the link has been established/not established.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.10728.2.10.2.2.3.1.1
an80iIfPmpLinkStatusCode Indicates the error code for the link.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10728.2.10.2.2.3.1.2
an80iIfRegPmpLinkConns Indicates the registered connections for this Link.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10728.2.10.2.2.3.1.3
an80iIfPmpLinkUpTime The time (in hundredths of a second) elapsed since the link was established (up) last time.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10728.2.10.2.2.3.1.4
an80iIfPmpLinkLostCount Number of times the link has been lost since the system started.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10728.2.10.2.2.3.1.5
an80iIfPmpLinkCurrDLUncBurstRate Indicates the index of the link's downlink actual uncoded burst rate.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10728.2.10.2.2.3.1.6
an80iIfPmpLinkDLRssi Indicates the link's DL RSSI (Received Signal Strength Indicator).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10728.2.10.2.2.3.1.7
an80iIfPmpLinkDLSinAdr Indicates the link's DL SINADR (Signal Interference and Noise Distorsion Ratio).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10728.2.10.2.2.3.1.8
an80iIfPmpLinkDLLostFrm Indicates the link's DL lost frames.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10728.2.10.2.2.3.1.9
an80iIfPmpLinkDLBlksTot Indicates the link's DL blocks transmitted.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10728.2.10.2.2.3.1.10
an80iIfPmpLinkDLBlksRetr Indicates the link's DL block re-transmitted.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10728.2.10.2.2.3.1.11
an80iIfPmpLinkDLBlksDisc Indicates the link's DL blocks lost	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10728.2.10.2.2.3.1.12
an80iIfPmpLinkCurrULUncBurstRate Indicates the index of the link's uplink actual uncoded burst rate.	Mb/sSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10728.2.10.2.2.3.1.13
an80iIfPmpLinkULRssi Indicates the link's UL RSSI (Received Signal Strength Indicator).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10728.2.10.2.2.3.1.14
an80iIfPmpLinkULSinAdr Indicates the link's UL SINADR (Signal Interference and Noise Distorsion Ratio).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10728.2.10.2.2.3.1.15
an80iIfPmpLinkULLostFrm Indicates the link's UL lost frames.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10728.2.10.2.2.3.1.16
an80iIfPmpLinkULBlksTot Indicates the link's UL blocks transmitted.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10728.2.10.2.2.3.1.17
an80iIfPmpLinkULBlksRetr Indicates the link's UL block re-transmitted.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10728.2.10.2.2.3.1.18
an80iIfPmpLinkULBlksDisc Indicates the link's UL blocks lost	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10728.2.10.2.2.3.1.19
an80iIfPmpLinkStatsStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10728.2.10.2.2.3.1.20

This table contains group configuration information. 
The group defined as a broadcast domain.

an80iIfPmpGroupConfigEntry row .1.3.6.1.4.1.10728.2.10.2.2.4.1

This table provides one row for each group defined in
the Service Controller

Indexes

an80iIfPmpGroupId

Column	Syntax	OID
an80iIfPmpGroupId The PMP Group Identifier.	Integer32 Constraints: range: 4-1023	.1.3.6.1.4.1.10728.2.10.2.2.4.1.1
an80iIfPmpGroupName The PMP Group Name.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.10728.2.10.2.2.4.1.2
an80iIfPmpGroupTaggingControl Specifies tagging mode.Only one pass-through group can exist. This is the default group. In the pass-through mode all the Ethernet packets that do not have a VLAN tag or an undefined VID will be classified in this g…	Enumerationr/w Enumerated Values: 1 passThrough 2 tagged	.1.3.6.1.4.1.10728.2.10.2.2.4.1.3
an80iIfPmpGroupVlanId In the tagged mode all Ethernet packets that have this VID will be classified to belong to this group.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.10728.2.10.2.2.4.1.4
an80iIfPmpGroupDefPriority This field is used every time a tag is added at the exit point. The priority will be the one specified at the entry point.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.10728.2.10.2.2.4.1.5
an80iIfPmpGroupSCEtherControl Makes the Sector Controller a member of the group.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.10728.2.10.2.2.4.1.6
an80iIfPmpGroupQosLevel QoS level (index) that will affect the bandwidth and the delay for this group.	Integer32r/w Constraints: range: 0-53	.1.3.6.1.4.1.10728.2.10.2.2.4.1.7
an80iIfPmpGroupConfigStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10728.2.10.2.2.4.1.8
an80iIfPmpGroupRate Define the index of the group rate. (0..7, 8=auto)	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.10728.2.10.2.2.4.1.9
an80iIfPmpGroupSStoSSMulticast Enable the Subscriber to subscriber multicast traffic.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.10728.2.10.2.2.4.1.10

This table contains group statistics information. 
The group defined as a broadcast domain.

an80iIfPmpGroupStatsEntry row .1.3.6.1.4.1.10728.2.10.2.2.5.1

This table provides one row for each group defined in
the Service Controller

Indexes

an80iIfPmpGroupId

Column	Syntax	OID
an80iIfPmpGroupPacketsTx Broadcast/multicast Ethernet packets classified and transmitted to the group.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10728.2.10.2.2.5.1.1
an80iIfPmpGroupPacketDisc Ethernet packets classified to be sent to the group but discarded due to unavailable memory.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10728.2.10.2.2.5.1.2
an80iIfPmpGroupStatsStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10728.2.10.2.2.5.1.3

This table contains connections configuration information. 
One connection defines the transport parameter for 
Ethernet packets that have specific properties.

an80iIfPmpConnConfigEntry row .1.3.6.1.4.1.10728.2.10.2.2.6.1

This table provides one row for each connection defined in
the Service Controller

Indexes

an80iIfPmpConnId

Column	Syntax	OID
an80iIfPmpConnId The PMP Conn Identifier.	Integer32 Constraints: range: 4-1023	.1.3.6.1.4.1.10728.2.10.2.2.6.1.1
an80iIfPmpConnName The PMP Conn Name.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.10728.2.10.2.2.6.1.2
an80iIfPmpConnTaggingControl Specifies tagging mode. Only one pass-through connection can be defined on each link. This is the default connection. All the untagged packets or with a VID that is not defined will be transmitted on this connection.	Enumerationr/w Enumerated Values: 1 passThrough 2 tagged	.1.3.6.1.4.1.10728.2.10.2.2.6.1.3
an80iIfPmpConnVlanId Specifies VLAN Id for the tagged mode.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.10728.2.10.2.2.6.1.4
an80iIfPmpConnDefPriority This field is used every time a tag is added at the exit point. The priority will be the one specified at the entry point.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.10728.2.10.2.2.6.1.5
an80iIfPmpConnDefParentLink This object specifies the parent link of the connection.	Integer32r/w Constraints: range: 4-1023	.1.3.6.1.4.1.10728.2.10.2.2.6.1.6
an80iIfPmpConnDefParenGroup This object specifies the parent group of the connection.	Integer32r/w Constraints: range: 4-1023	.1.3.6.1.4.1.10728.2.10.2.2.6.1.7
an80iIfPmpConnDLQos Connection QoS level (index) that will affect the DL bandwidth and the delay.	Integer32r/w Constraints: range: 0-53	.1.3.6.1.4.1.10728.2.10.2.2.6.1.8
an80iIfPmpConnULQos Connection QoS level (index) that will affect the UL bandwidth and the delay.	Integer32r/w Constraints: range: 0-53	.1.3.6.1.4.1.10728.2.10.2.2.6.1.9
an80iIfPmpConnConfigStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10728.2.10.2.2.6.1.10

This table contains connections configuration information.
One connection defines the transport parameter for 
Ethernet packets that have specific properties.

an80iIfPmpConnStatsEntry row .1.3.6.1.4.1.10728.2.10.2.2.7.1

This table provides one row for each connection defined in
the Service Controller

Indexes

an80iIfPmpConnId

Column	Syntax	OID
an80iIfPmpConnDLPacketsTx Indicates Ethernet packets sent by SC.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10728.2.10.2.2.7.1.1
an80iIfPmpConnDLPacketsRx Indicates Ethernet packets receivedby SS.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10728.2.10.2.2.7.1.2
an80iIfPmpConnDLPacketsDisc Indicates packets discarded due to full buffer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10728.2.10.2.2.7.1.3
an80iIfPmpConnULPacketsTx Indicates Ethernet packets sent by SS.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10728.2.10.2.2.7.1.4
an80iIfPmpConnULPacketsRx Indicates Ethernet packets received SC.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10728.2.10.2.2.7.1.5
an80iIfPmpConnULPacketsDisc Indicates packets discarded due to full buffer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10728.2.10.2.2.7.1.6
an80iIfPmpConnStatsStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10728.2.10.2.2.7.1.7