RC-VRF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
39

rcVrfConfigTable

table
.1.3.6.1.4.1.2272.1.203.1.1.1.2 · 1 row entry · 12 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcVrfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-VRF-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-VRF-MIB::rcVrfConfigTable' 
This table is for creating the new Virtual Routers.
rcVrfConfigEntry row .1.3.6.1.4.1.2272.1.203.1.1.1.2.1
The entries in this table can be added/deleted
using the rcVrfRowStatus.
Indexes
Column Syntax OID
rcVrfId
The unique id of this virtual router instance. A Virtual
Router cannot not be created with rcVrfId = 0.
VRFID 0 is reserved for the Administrative VRF.
VrfIdentifier
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.1
rcVrfRowStatus
The status column has three defined values:

- `active', which indicates that the conceptual row is
available for use by the managed device;
- `createAndGo', which is supplied by a management
station wishi…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.2
rcVrfName
The Name of the Virtual Router.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.3
rcVrfContextName
The SNMPv2 Community String or SNMPv3 contextName
denotes the VRF 'context' and is used to logically
separate the MIB module management.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.4
rcVrfTrapEnable
This objects is used to enable the generation
of the VrfUp and VrfDown traps.
true(1) - VRF Traps Enabled
false(2) - VRF Traps Disabled
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.5
rcVrfMaxRoutes
This object specifies the maximum number of routes that
this VRF can support. The default value is 10000.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.6
rcVrfAdminStatus
The administrative state of the Virtual Router.
Enumerationr/w
Enumerated Values:
1up
2down
3testing
4unknown
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.7
rcVrfVpnId
The Virtual Private Network Identifier of the Virtual
Router.
VPNIdr/w
Type Constraints:
range: 7
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.8
rcVrfRpTrigger
This object represents Routing Protocol (RP)
Triggers on a Virtual Router and it meant to
be used to initiate or shutdown routing
protocols on a VRF. Multiple RPs can be acted
on simultaneously. Also, individual RPs c…
VrfRpTriggerBitCoder/w
Type Values:
0rip
1ospf
2bgp
3isis
4pim
5mvr
6pim6
7msdp
8ospfv3
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.9
rcVrfMaxRoutesTrapEnable
This objects is used to enable the generation
of the VRF Max Routes Exceeded traps.
true(1) - VRF Max Routes Exceeded Traps Enabled
false(2) - VRF Max Routes Exceeded Traps Disabled
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.10
rcVrfIpv6MaxRoutes
This object specifies the maximum number of IPv6 routes that
this VRF can support. The default value is 5000.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.11
rcVrfIpv6MaxRoutesTrapEnable
This objects is used to enable the generation
of the IPv6 VRF Max Routes Exceeded traps.
true(1) - VRF IPv6 Max Routes Exceeded Traps Enabled
false(2) - VRF IPv6 Max Routes Exceeded Traps Disabled
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.203.1.1.1.2.1.12

rcVrfStatTable

table
.1.3.6.1.4.1.2272.1.203.1.1.2.2 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcVrfStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-VRF-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-VRF-MIB::rcVrfStatTable' 
This table contains statistics for the Virtual Router.
rcVrfStatEntry row .1.3.6.1.4.1.2272.1.203.1.1.2.2.1
Entries in this table are per rcVrfId.
Indexes
Column Syntax OID
rcVrfStatRouteEntries
Total number of routes for this VRF.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.1
rcVrfStatFIBEntries
Total number of FIB Entries for this VRF.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.2
rcVrfStatUpTime
The time in (in hundredths of a second) since
this VRF entry has been operational.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.3
rcVrfOperStatus
The operational status of the Virtual Router.
Enumeration
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.4
rcVrfRpStatus
This object represents the status of Routing
Protocols on this VRF corresponding to the list
of RP specified in rcVrfRpTrigger.

The BITS represent an Action-code that specifies
the status of the RPs.
The …
VrfRpTriggerBitCode
Type Values:
0rip
1ospf
2bgp
3isis
4pim
5mvr
6pim6
7msdp
8ospfv3
 .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.5
rcVrfRouterAddressType
Router Address Type of this VRF.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.6
rcVrfRouterAddress
Router Address of this VRF. It is derived from one of the
interfaces. If loopback interface is present, the loopback
interface address can be used. However, loopback interface
is optional.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.203.1.1.2.2.1.7

rcVrfIpVpnTable

table
.1.3.6.1.4.1.2272.1.203.1.1.4 · 1 row entry · 10 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcVrfIpVpnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-VRF-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-VRF-MIB::rcVrfIpVpnTable' 
Table required to configure vpn under ip.
rcVrfIpVpnTableEntry row .1.3.6.1.4.1.2272.1.203.1.1.4.1
Entries in this table are per rcVrfId.
Indexes
Column Syntax OID
rcVrfIpVpnVrfId
The VrfId serves as the Index for the rcIpVpnVrfTable and
also for the rcIpVpnRouteDistinguisherTable. It allows to
connect to the vrf table to obtain other attributes like the
vrf name, rcVrfMaxRoutesTrapEnable etc.
VrfIdentifier
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.203.1.1.4.1.1
rcVrfIpVpnStatus
The status of IpVpn.
RAPID-CITYEnableValuer/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.203.1.1.4.1.2
rcVrfIpVpnImportRTList
The Import RT list is a list of all the route-targets
attached to a particular vrf behaving in the import mode.
RAPID-CITYIdListr/w .1.3.6.1.4.1.2272.1.203.1.1.4.1.3
rcVrfIpVpnExportRTList
The Export RT list is a list of all the route-targets
attached to a particular vrf in the export mode.
RAPID-CITYIdListr/w .1.3.6.1.4.1.2272.1.203.1.1.4.1.4
rcVrfIpVpnSvcLblAllocOpt
The service label allocation option for the ipvpn
Enumerationr/w
Enumerated Values:
1perVrfperNexthop
2perVrf
 .1.3.6.1.4.1.2272.1.203.1.1.4.1.5
rcVrfIpVpnRowStatus
RowStatus for the Vpn Entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.203.1.1.4.1.6
rcVrfIpVpnIsidNumber
IP VPN I-SID number.Default 0 value indicates
that no i-sid has been assinged.
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2272.1.203.1.1.4.1.7
rcVrfIpEvpnEnableStatus
The status of Evpn.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.203.1.1.4.1.8
rcVrfIpEvpnVnidNumber
Ip Evpn VNID number.Default 0 value indicates
that no VNID has been assinged.
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2272.1.203.1.1.4.1.9
rcVrfIpVpnIsidName
The administratively-assigned name for the I-SID.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.203.1.1.4.1.10

rcVrfNameTable

table
.1.3.6.1.4.1.2272.1.203.1.1.5 · 1 row entry · 2 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcVrfNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-VRF-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-VRF-MIB::rcVrfNameTable' 
This table is for EDM and SNMP agent to get source vrf name
for inter-vrf route redistribute.
rcVrfNameEntry row .1.3.6.1.4.1.2272.1.203.1.1.5.1
Each entry has the vrfid and name for source vrf needed by
inter-vrf route redistribute.
Indexes
Column Syntax OID
rcVrfNameVrfId
The unique id of this virtual router instance.
VrfIdentifier
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.203.1.1.5.1.1
rcVrfNameVrfName
The Name of the Virtual Router.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.203.1.1.5.1.2

rcVrfIpv6IpVpnTable

table
.1.3.6.1.4.1.2272.1.203.1.1.7 · 1 row entry · 8 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcVrfIpv6IpVpnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-VRF-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-VRF-MIB::rcVrfIpv6IpVpnTable' 
Table required to configure vpn under ipv6.
rcVrfIpv6IpVpnTableEntry row .1.3.6.1.4.1.2272.1.203.1.1.7.1
Entries in this table are per rcVrfId.
Indexes
Column Syntax OID
rcVrfIpv6IpVpnVrfId
The VrfId serves as the Index for the rcVrfIpv6IpVpnTable
It allows to connect to the vrf table to obtain other attributes like the
vrf name etc.
VrfIdentifier
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.203.1.1.7.1.1
rcVrfIpv6IpVpnStatus
The status of Ipv6Vpn.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.203.1.1.7.1.2
rcVrfIpv6IpVpnImportRTList
The Import RT list is a list of all the route-targets
attached to a particular vrf behaving in the import mode.
RAPID-CITYIdListr/w .1.3.6.1.4.1.2272.1.203.1.1.7.1.3
rcVrfIpv6IpVpnExportRTList
The Export RT list is a list of all the route-targets
attached to a particular vrf in the export mode.
RAPID-CITYIdListr/w .1.3.6.1.4.1.2272.1.203.1.1.7.1.4
rcVrfIpv6IpVpnSvcLblAllocOpt
The service label allocation option for the ipv6vpn
Enumerationr/w
Enumerated Values:
1perVrfperNexthop
2perVrf
 .1.3.6.1.4.1.2272.1.203.1.1.7.1.5
rcVrfIpv6IpVpnRowStatus
RowStatus for the Vpn Entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.203.1.1.7.1.6
rcVrfIpv6IpVpnIsidNumber
Ipv6 IP VPN I-SID number.Default 0 value indicates
that no i-sid has been assinged.
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2272.1.203.1.1.7.1.7
rcVrfIpv6IpVpnIsidName
The administratively-assigned name for the I-SID.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.203.1.1.7.1.8