RC-POWER-RANGER-MIB Table View

A list of GPID entries. The number of entries is
given by rcPrQosPolicyNumPolicies.

rcPrQosPolicyEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.2.1

Entry containing configuration information for a
particular global policer.

Indexes

rcPrQosPolicyGpId

Column	Syntax	OID
rcPrQosPolicyGpId A value that uniquely identifies Global Policer associated with this entry.	Integer32 Constraints: range: 1-16383	.1.3.6.1.4.1.2272.1.202.1.1.1.2.1.1
rcPrQosPolicyName An administratively-assigned name for this Global Policer.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.1.2.1.2
rcPrQosPolicyPeakRate Global Policer Peak Rate in Kilobit/sec.	Integer32r/w Constraints: range: 0-10000000	.1.3.6.1.4.1.2272.1.202.1.1.1.2.1.3
rcPrQosPolicySvcRate Global Policer Service Rate in Kilobit/sec.	Integer32r/w Constraints: range: 0-10000000	.1.3.6.1.4.1.2272.1.202.1.1.1.2.1.4
rcPrQosPolicyLaneMembers The set of lanes that are members of this Global Policer. The string is 4 octets long, for a total of 32 bits. Each bit corresponds to a laneId. Each I/O slot has 4 laneIds. When a bit has the value one(1), the co…	LaneSetr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.202.1.1.1.2.1.5
rcPrQosPolicyRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.1.2.1.6

A list of local (aka physical) policer entries.

rcPrQosLocalPolicyEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.3.1

An entry containing configuration information for
a particular local policer.

Indexes

rcPrQosLocalPolicyGpId rcPrQosLocalPolicyIndex

Column	Syntax	OID
rcPrQosLocalPolicyGpId A value of Global Policer ID corresponding to this local policer.	Integer32 Constraints: range: 1-16383	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.1
rcPrQosLocalPolicyIndex A value that uniquely identifies the local Policer associated with this entry. Concatenation of tap.lane.lpid.	Integer32 Constraints: range: 0-16383	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.2
rcPrQosLocalPolicyPeakRate Local Policer Peak Rate in Kilobit/sec. Equals to that of corresponding Global Policer ID.	Integer32 Constraints: range: 0-10000000	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.3
rcPrQosLocalPolicySvcRate Local Policer Service Rate in Kilobit/sec. Equals to that of corresponding Global Policer ID.	Integer32 Constraints: range: 0-10000000	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.4
rcPrQosLocalPolicyTotalPkts Local Policer Total Packets Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.5
rcPrQosLocalPolicyTotalBytes Local Policer Total Bytes Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.6
rcPrQosLocalPolicyBytesOverPeak Local Policer Bytes over Peak Rate Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.7
rcPrQosLocalPolicyBytesOverSvc Local Policer Bytes over Service Rate Count.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.8
rcPrQosLocalPolicyTotalPktsDropped The count of Local Policer Total Packets dropped due to reasons other than policing, e.g. congestion.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.9
rcPrQosLocalPolicyLaneMember The lane that this Gpid has a local policing account on	OctetString Constraints: range: 0-4	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.10
rcPrQosLocalPolicyGreenPackets The total number of packets received that were below committed rate.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.11
rcPrQosLocalPolicyGreenBytes The total number of bytes received that were below the committed rate.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.12
rcPrQosLocalPolicyYellowPackets The total number of packets received that were above the committed rate but below the peak rate.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.13
rcPrQosLocalPolicyYellowBytes The total number of bytes received that were above the committed rate but below the peak rate.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.14
rcPrQosLocalPolicyRedPackets The total number of packets received that were above the peak rate.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.15
rcPrQosLocalPolicyRedBytes The total number of bytes received that were above the peak rate.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.16
rcPrQosLocalPolicyStatsClear Clear Qos Policy statistics.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.1.3.1.17

A list of egress queue templates. The number of 
templates is given by rcPrQosTxQueueNumTemplates.

rcPrQosTxQueueTemplateEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.4.1

Entry containing configuration information for a
particular egress queue template. Queue is a set of
egress queues.

Indexes

rcPrQosTxQueueTemplateId

Column	Syntax	OID
rcPrQosTxQueueTemplateId A value that uniquely identifies Egress Queue Template.	Integer32 Constraints: range: 1-386	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.1
rcPrQosTxQueueTemplateName An administratively-assigned name for this egress Queue Template.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.2
rcPrQosTxQueueTemplateMaxQueues Maximum number of queues in this Template.	Enumerationr/w Enumerated Values: 8 eight 64 sixtyfour	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.3
rcPrQosTxQueueTemplateBalancedQueues Total number of Balanced Queues in this Template.	Integer32r/w Constraints: range: 0-48	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.4
rcPrQosTxQueueTemplateHiPriQueues Total number of High Priority Queues in this Template.	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.5
rcPrQosTxQueueTemplateLoPriQueues Total number of Low Priority Queues in this Template.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.6
rcPrQosTxQueueTemplateTotalQueues Total number of queues in this Template.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.7
rcPrQosTxQueueTemplateBalancedQList List of Balanced Queues in this Template.	OctetString Constraints: range: 0-200	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.8
rcPrQosTxQueueTemplateHiPriQList List of High Priority Queues in this Template.	OctetString Constraints: range: 0-200	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.9
rcPrQosTxQueueTemplateLoPriQList List of Low Priority Queues in this Template.	OctetString Constraints: range: 0-200	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.10
rcPrQosTxQueueTemplateTotalQLists List of Total Physical Queues in this Template.	OctetString Constraints: range: 0-600	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.11
rcPrQosTxQueueTemplateMinRateTotal Sum of minimum rate guarantees for this template.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.12
rcPrQosTxQueueTemplateMaxRateHiPri Sum of maximum rate guarantees for high priority queues of this template.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.13
rcPrQosTxQueueTemplatePortMembers Port members of this template.	RAPID-CITYPortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.14
rcPrQosTxQueueTemplateFlags Bitset indicated template state.	Enumerationr/w Enumerated Values: 1 created 2 committed 3 modified	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.15
rcPrQosTxQueueTemplateApply When apply is issued by the administrator, the Egress Queue Set attributes are committed.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.16
rcPrQosTxQueueTemplateRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.1.4.1.17

A list of elementary Egress queue entries.

rcPrQosTxQueueEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.5.1

Entry containing configuration information for a
particular elementary egress queue.

Indexes

rcPrQosTxQueueTid rcPrQosTxQueueQid

Column	Syntax	OID
rcPrQosTxQueueTid Template ID of the template this queue belongs to.	Integer32 Constraints: range: 1-386	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.1
rcPrQosTxQueueQid Queue Offset from the base queue for this port.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.2
rcPrQosTxQueueName An NNSC name for this egress queue. Allowed only for 8 NNSC queues.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.3
rcPrQosTxQueueStyle Egress queue style.	Enumerationr/w Enumerated Values: 1 hipri 2 balanced 3 lopri	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.4
rcPrQosTxQueueWeight Egress queue weight. Applicable for balanced queues and lo-pri queues only.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.5
rcPrQosTxQueueMaxRate Egress queue maximum rate, Kbs	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.6
rcPrQosTxQueueMinRate Egress queue minimun rate guarantee, Kbs. Applicable for balanced queues and lo-pri queues only.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.7
rcPrQosTxQueueBquantum Bandwidth allocation unit. Applicable for balanced queues and lo-pri queues only.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.8
rcPrQosTxQueueMaxLength Maximum queue length.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.9
rcPrQosTxQueueWredCurveSet Random Early Detection Number.	Enumerationr/w Enumerated Values: 1 tailDrop 2 lowDrop 3 mediumDrop 4 highDrop	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.10
rcPrQosTxQueueRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.1.5.1.11

A list of elementary Egress queue stats entries.

rcPrQosTxQueueStatsEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.6.1

Entry containing statistics information for a
particular elementary egress queue.

Indexes

rcPrQosTxQueueStatsPort rcPrQosTxQueueStatsQid

Column	Syntax	OID
rcPrQosTxQueueStatsPort Port index of the stats table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.202.1.1.1.6.1.1
rcPrQosTxQueueStatsQid Queue Offset from the base queue for this port.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.202.1.1.1.6.1.2
rcPrQosTxQueueStatsTotalPages Total pages offered to the queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.6.1.3
rcPrQosTxQueueStatsDroppedPages Total pages dropped by the queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.6.1.4
rcPrQosTxQueueStatsUtilization Utilization percentage of the queue.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.202.1.1.1.6.1.5

This table is used to specify the Mpls EXP to
QOS (Exp bit->QOS) mapping on packet ingress.

rcPrQosIngressExpToQosEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.7.1

Entry containing information of Exp bit->Qos mapping

Indexes

rcPrQosIngressExpToQosIndex

Column	Syntax	OID
rcPrQosIngressExpToQosIndex Used to uniquely identify a row in this table.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.202.1.1.1.7.1.1
rcPrQosIngressExpToQosMplsExp The Mpls Exp bit level.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.202.1.1.1.7.1.2
rcPrQosIngressExpToQosLevel qos level	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.202.1.1.1.7.1.3
rcPrQosIngressExpToQosRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.1.7.1.4

This table is used to specify the QOS to
Mpls EXP bit field (QOS->Exp bit) mapping on packet
egress.

rcPrQosEgressQosToExpEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.8.1

Entry containing infomation of Qos->Exp bit mapping

Indexes

rcPrQosEgressQosToExpIndex

Column	Syntax	OID
rcPrQosEgressQosToExpIndex Used to uniquely identify a row in this table.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.202.1.1.1.8.1.1
rcPrQosEgressQosToExpQosLevel qos level	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.202.1.1.1.8.1.2
rcPrQosEgressQosToExpMplsExp The Mpls EXP bit level.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.202.1.1.1.8.1.3
rcPrQosEgressQosToExpRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.1.8.1.4

A list of elementary egress queue templates.

rcPrQosSubportQueueSetTemplateEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.9.1

Entry containing configuration information for
a particular egress queue template. Queue is a
set of egress queues

Indexes

rcPrQosSubportQueueSetTemplatePortIndex rcPrQosSubportQueueSetTemplateIndex

Column	Syntax	OID
rcPrQosSubportQueueSetTemplatePortIndex Port Index.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.1
rcPrQosSubportQueueSetTemplateIndex A name assigned for this Subport Queue Set.	Integer32 Constraints: range: 1-80	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.2
rcPrQosSubportQueueSetTemplatePort Port assigned for this Subport Queue Set.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.3
rcPrQosSubportQueueSetTemplateApply When apply is issued by the administrators, the subport queue set attributes are committed.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.4
rcPrQosSubportQueueSetTemplateSubportProfileName Name of the subport queue profile to be applied for this template.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.5
rcPrQosSubportQueueSetTemplateAssignment Name of the trunk to this queue set is assigned.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.6
rcPrQosSubportQueueSetTemplateRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.7
rcPrQosSubportQueueSetTemplateMinRate Minimum Rate. Minimum Rate of less than 10000 is valid only on 48 Port RC Modules. On all other modules the minimum value Min Rate can be configured is 10000.	Integer32r/w Constraints: range: 2000-10000000	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.8
rcPrQosSubportQueueSetTemplateMaxRate Maximum Rate. Maximum Rate of less than 10000 is valid only on 48 Port RC Modules. On all other modules the minimum value Max Rate can be configured is 10000.	Integer32r/w Constraints: range: 2000-10000000	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.9
rcPrQosSubportQueueSetTemplateMaxRateState Enable/Disable the maximum rate.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.10
rcPrQosSubportQueueSetTemplateStatus Bitset indicating Subport Queue Set status.	Enumeration Enumerated Values: 1 created 2 applied 3 modified	.1.3.6.1.4.1.2272.1.202.1.1.1.9.1.11

Isid Rate Limits Tables are 
for R-Module cards only

rcPrQosIsidRateLimitsEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.10.1

Isid Rate Limits Table

Indexes

rcPrQosIsidRateLimitsSlotNumber rcPrQosIsidRateLimitsLaneNumber

Column	Syntax	OID
rcPrQosIsidRateLimitsSlotNumber Slot number.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.202.1.1.1.10.1.1
rcPrQosIsidRateLimitsLaneNumber Lane number. On a 30 Port 1G card (8630GBR), Ports 1 to 10 are grouped under Lane 1, Ports 11 to 20 are grouped under Lane 2 and Ports 21 to 30 are grouped under Lane 3. For a 3 Port 10G card (8683XLR), Port 1 comes und…	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.2272.1.202.1.1.1.10.1.2
rcPrQosIsidRateLimitsAdminState Admin control for the Rate Limiter Table.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.1.10.1.3

Table contain rate limit for all Power Range card  (R module).
Based on Slot and lane number and Isid ID

rcPrQosIsidRateLimitsIsidEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.11.1

Entry of Rate limit per slot and lane and Isid ID

Indexes

rcPrQosIsidRateLimitsIsidSlotNumber rcPrQosIsidRateLimitsIsidLaneNumber rcPrQosIsidRateLimitsIsidIsidId

Column	Syntax	OID
rcPrQosIsidRateLimitsIsidSlotNumber Slot number.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.202.1.1.1.11.1.1
rcPrQosIsidRateLimitsIsidLaneNumber Lane number. On a 30 Port 1G card (8630GBR), Ports 1 to 10 are grouped under Lane 1, Ports 11 to 20 are grouped under Lane 2 and Ports 21 to 30 are grouped under Lane 3. For a 3 Port 10G card (8683XLR), Port 1 comes und…	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.2272.1.202.1.1.1.11.1.2
rcPrQosIsidRateLimitsIsidIsidId Isid Id.	Integer32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.202.1.1.1.11.1.3
rcPrQosIsidRateLimitsIsidRateLimit Rate Limit in Mbps.	Integer32 Constraints: range: 1-10000	.1.3.6.1.4.1.2272.1.202.1.1.1.11.1.4

Table contain Subport Queue Profile information

rcPrQosSubportProfileEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.12.1

Subport Queue Profile Table entry

Indexes

rcPrQosSubportProfileIndex

Column	Syntax	OID
rcPrQosSubportProfileIndex A value that uniquely identifies the Subport Queue Profile.	Integer32 Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.1
rcPrQosSubportProfileName Subport Queue Profile table name to be used.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.2
rcPrQosSubportProfileBalancedQueues Total number of Balanced Queues in this profile.	Integer32r/w Constraints: range: 0-6	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.3
rcPrQosSubportProfileHighPriQueues Total number of High Priority Queues in this profile.	Integer32r/w Constraints: range: 1-7	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.4
rcPrQosSubportProfileLowPriQueues Total number of Low Priority Queues in this profile.	Integer32r/w Constraints: range: 1-7	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.5
rcPrQosSubportProfileBalancedQList List of Balanced Queues in this profile.	OctetString Constraints: range: 0-50	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.6
rcPrQosSubportProfileHighPriQList List of High Priority Queues in this profile.	OctetString Constraints: range: 0-50	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.7
rcPrQosSubportProfileLowPriQList List of Low Priority Queues in this profile.	OctetString Constraints: range: 0-50	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.8
rcPrQosSubportProfileRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.1.12.1.9

A list of elementary subport queue entries.

rcPrQosSubportProfileQueueEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.13.1

Entry containing configuration information for
a particular subport egress queue.

Indexes

rcPrQosSubportProfileQueueProfileIndex rcPrQosSubportProfileQueueQIndex

Column	Syntax	OID
rcPrQosSubportProfileQueueProfileIndex Profile index of the profie this queue belongs to.	Integer32 Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.202.1.1.1.13.1.1
rcPrQosSubportProfileQueueQIndex Queue offset from the base queue.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.202.1.1.1.13.1.2
rcPrQosSubportProfileQueueQStyle Queue style.	Enumeration Enumerated Values: 1 highPri 2 balanced 3 lowPri	.1.3.6.1.4.1.2272.1.202.1.1.1.13.1.3
rcPrQosSubportProfileQueueMaxRate Queue maximum rate in percentage.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.202.1.1.1.13.1.4
rcPrQosSubportProfileQueueMinRate Queue minimum rate in percentage.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2272.1.202.1.1.1.13.1.5
rcPrQosSubportProfileQueueMaxLength Maximum queue length.	Integer32r/w Constraints: range: 0-8000	.1.3.6.1.4.1.2272.1.202.1.1.1.13.1.6
rcPrQosSubportProfileQueueWredCurveSet Weighted Random Early Detection setting.	Enumerationr/w Enumerated Values: 1 tailDrop 2 lowDrop 3 mediumDrop 4 highDrop	.1.3.6.1.4.1.2272.1.202.1.1.1.13.1.7
rcPrQosSubportProfileQueueQPriority Q Priority.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.202.1.1.1.13.1.8

Internal QoS to Egress Queue mapping table.

rcPrQosSubportQueueSetEqmapEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.14.1

Entry containing egress queue id for an
internal QoS level on a subport q set.

Indexes

rcPrQosSubportQueueSetEqmapPortIndex rcPrQosSubportQueueSetEqmapIndex rcPrQosSubportQueueSetEqmapInternalQos

Column	Syntax	OID
rcPrQosSubportQueueSetEqmapPortIndex Port Index.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.202.1.1.1.14.1.1
rcPrQosSubportQueueSetEqmapIndex Subport Queue Set Index.	Integer32 Constraints: range: 1-80	.1.3.6.1.4.1.2272.1.202.1.1.1.14.1.2
rcPrQosSubportQueueSetEqmapInternalQos Internal QoS.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.202.1.1.1.14.1.3
rcPrQosSubportQueueSetEqmapPort Port assigned for this Subport Queue Set.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.202.1.1.1.14.1.4
rcPrQosSubportQueueSetEqmapEgressQueue Egress Queue Id assigned for the specified Internal QoS Lvl.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.202.1.1.1.14.1.5

This table is used to get the qos cos queue port stats.

rcPrQosCosQuePortStatsEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.15.1

Entry containing information of port Qos cosq stats

Indexes

rcPrQosCosQuePortStatsIndex

Column	Syntax	OID
rcPrQosCosQuePortStatsIndex Used to indicate the loopback port number from 192(1/1) to 297(2/42).	Integer32 Constraints: range: 192-297	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.1
rcPrQosCosQuePortStatsQue0OutPackets the out packets for Cos queue 0.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.2
rcPrQosCosQuePortStatsQue0OutBytes the out bytes for Cos queue 0.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.3
rcPrQosCosQuePortStatsQue0DropPackets the drop packets for Cos queue 0.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.4
rcPrQosCosQuePortStatsQue0DropBytes the drop bytes for Cos queue 0.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.5
rcPrQosCosQuePortStatsQue1OutPackets the out packets for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.6
rcPrQosCosQuePortStatsQue1OutBytes the out bytes for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.7
rcPrQosCosQuePortStatsQue1DropPackets the drop packets for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.8
rcPrQosCosQuePortStatsQue1DropBytes the drop bytes for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.9
rcPrQosCosQuePortStatsQue2OutPackets the out packets for Cos queue 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.10
rcPrQosCosQuePortStatsQue2OutBytes the out bytes for Cos queue 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.11
rcPrQosCosQuePortStatsQue2DropPackets the drop packets for Cos queue 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.12
rcPrQosCosQuePortStatsQue2DropBytes the drop bytes for Cos queue 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.13
rcPrQosCosQuePortStatsQue3OutPackets the out packets for Cos queue 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.14
rcPrQosCosQuePortStatsQue3OutBytes the out bytes for Cos queue 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.15
rcPrQosCosQuePortStatsQue3DropPackets the drop packets for Cos queue 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.16
rcPrQosCosQuePortStatsQue3DropBytes the drop bytes for Cos queue 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.17
rcPrQosCosQuePortStatsQue4OutPackets the out packets for Cos queue 4.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.18
rcPrQosCosQuePortStatsQue4OutBytes the out bytes for Cos queue 4.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.19
rcPrQosCosQuePortStatsQue4DropPackets the drop packets for Cos queue 4.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.20
rcPrQosCosQuePortStatsQue4DropBytes the drop bytes for Cos queue 4.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.21
rcPrQosCosQuePortStatsQue5OutPackets the out packets for Cos queue 5.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.22
rcPrQosCosQuePortStatsQue5OutBytes the out bytes for Cos queue 5.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.23
rcPrQosCosQuePortStatsQue5DropPackets the drop packets for Cos queue 5.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.24
rcPrQosCosQuePortStatsQue5DropBytes the drop bytes for Cos queue 5.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.25
rcPrQosCosQuePortStatsQue6OutPackets the out packets for Cos queue 6.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.26
rcPrQosCosQuePortStatsQue6OutBytes the out bytes for Cos queue 6.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.27
rcPrQosCosQuePortStatsQue6DropPackets the drop packets for Cos queue 6.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.28
rcPrQosCosQuePortStatsQue6DropBytes the drop bytes for Cos queue 6.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.29
rcPrQosCosQuePortStatsQue7OutPackets the out packets for Cos queue 7.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.30
rcPrQosCosQuePortStatsQue7OutBytes the out bytes for Cos queue 7.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.31
rcPrQosCosQuePortStatsQue7DropPackets the drop packets for Cos queue 7.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.32
rcPrQosCosQuePortStatsQue7DropBytes the drop bytes for Cos queue 7.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.33
rcPrQosCosQuePortStatsClearStat Clear Stats.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.1.15.1.34

This table is used to get the qos cos queue port stats.

rcPrQosCosQueLoopbackPortStatsEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.16.1

Entry containing information of port Qos cosq stats

Indexes

rcPrQosCosQueLoopbackPortStatsIndex

Column	Syntax	OID
rcPrQosCosQueLoopbackPortStatsIndex Used to indicate the port number from 1 to 2.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.1
rcPrQosCosQueLoopbackPortStatsQue0OutPackets the out packets for Cos queue 0.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.2
rcPrQosCosQueLoopbackPortStatsQue0OutBytes the out bytes for Cos queue 0.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.3
rcPrQosCosQueLoopbackPortStatsQue0DropPackets the drop packets for Cos queue 0.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.4
rcPrQosCosQueLoopbackPortStatsQue0DropBytes the drop bytes for Cos queue 0.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.5
rcPrQosCosQueLoopbackPortStatsQue1OutPackets the out packets for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.6
rcPrQosCosQueLoopbackPortStatsQue1OutBytes the out bytes for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.7
rcPrQosCosQueLoopbackPortStatsQue1DropPackets the drop packets for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.8
rcPrQosCosQueLoopbackPortStatsQue1DropBytes the drop bytes for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.9
rcPrQosCosQueLoopbackPortStatsQue2OutPackets the out packets for Cos queue 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.10
rcPrQosCosQueLoopbackPortStatsQue2OutBytes the out bytes for Cos queue 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.11
rcPrQosCosQueLoopbackPortStatsQue2DropPackets the drop packets for Cos queue 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.12
rcPrQosCosQueLoopbackPortStatsQue2DropBytes the drop bytes for Cos queue 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.13
rcPrQosCosQueLoopbackPortStatsQue3OutPackets the out packets for Cos queue 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.14
rcPrQosCosQueLoopbackPortStatsQue3OutBytes the out bytes for Cos queue 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.15
rcPrQosCosQueLoopbackPortStatsQue3DropPackets the drop packets for Cos queue 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.16
rcPrQosCosQueLoopbackPortStatsQue3DropBytes the drop bytes for Cos queue 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.17
rcPrQosCosQueLoopbackPortStatsQue4OutPackets the out packets for Cos queue 4.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.18
rcPrQosCosQueLoopbackPortStatsQue4OutBytes the out bytes for Cos queue 4.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.19
rcPrQosCosQueLoopbackPortStatsQue4DropPackets the drop packets for Cos queue 4.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.20
rcPrQosCosQueLoopbackPortStatsQue4DropBytes the drop bytes for Cos queue 4.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.21
rcPrQosCosQueLoopbackPortStatsQue5OutPackets the out packets for Cos queue 5.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.22
rcPrQosCosQueLoopbackPortStatsQue5OutBytes the out bytes for Cos queue 5.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.23
rcPrQosCosQueLoopbackPortStatsQue5DropPackets the drop packets for Cos queue 5.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.24
rcPrQosCosQueLoopbackPortStatsQue5DropBytes the drop bytes for Cos queue 5.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.25
rcPrQosCosQueLoopbackPortStatsQue6OutPackets the out packets for Cos queue 6.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.26
rcPrQosCosQueLoopbackPortStatsQue6OutBytes the out bytes for Cos queue 6.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.27
rcPrQosCosQueLoopbackPortStatsQue6DropPackets the drop packets for Cos queue 6.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.28
rcPrQosCosQueLoopbackPortStatsQue6DropBytes the drop bytes for Cos queue 6.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.29
rcPrQosCosQueLoopbackPortStatsQue7OutPackets the out packets for Cos queue 7.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.30
rcPrQosCosQueLoopbackPortStatsQue7OutBytes the out bytes for Cos queue 7.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.31
rcPrQosCosQueLoopbackPortStatsQue7DropPackets the drop packets for Cos queue 7.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.32
rcPrQosCosQueLoopbackPortStatsQue7DropBytes the drop bytes for Cos queue 7.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.33
rcPrQosCosQueLoopbackPortStatsClearStat Clear stats.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.1.16.1.34

This table is used to get the qos cos queue port stats.

rcPrQosCosQueCppPortStatsEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.17.1

Entry containing information of port Qos cosq stats

Indexes

rcPrQosCosQueCppPortStatsIndex

Column	Syntax	OID
rcPrQosCosQueCppPortStatsIndex Used to indicate the cos queue number from 0 to 15.	Integer32 Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.202.1.1.1.17.1.1
rcPrQosCosQueCppPortStatsOutPackets the out packets for cpp port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.17.1.2
rcPrQosCosQueCppPortStatsOutBytes the out bytes for cpp port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.17.1.3
rcPrQosCosQueCppPortStatsDropPackets the drop packets for cpp port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.17.1.4
rcPrQosCosQueCppPortStatsDropBytes the drop bytes for cpp port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.17.1.5

This table is used to get the qos cos queue 
Voq port stats.

rcPrQosCosQueVoqPortStatsEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.19.1

Entry containing information of port Qos cosq Voq stats

Indexes

rcPrQosCosQueVoqPortStatsPortIndex rcPrQosCosQueVoqPortStatsQueIndex

Column	Syntax	OID
rcPrQosCosQueVoqPortStatsPortIndex Used to indicate the port number	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.202.1.1.1.19.1.1
rcPrQosCosQueVoqPortStatsQueIndex Used to indicate the queue id.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.202.1.1.1.19.1.2
rcPrQosCosQueVoqPortStatsAcceptedPackets Numer of packets that entered the VOQ.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.19.1.3
rcPrQosCosQueVoqPortStatsAcceptedBytes Numer of bytes that entered the VOQ.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.19.1.4
rcPrQosCosQueVoqPortStatsDropPackets Numer of dropped packets because the VOQ was full.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.19.1.5
rcPrQosCosQueVoqPortStatsDropBytes Numer of dropped bytes because the VOQ was full.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.19.1.6
rcPrQosCosQueVoqPortStatsClearStat Clear Voq Port Stats if set to true. Return value will always be false.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.1.19.1.7

This table is used to get the qos cos queue Voq 
cpp stats.

rcPrQosCosQueVoqCppPortStatsEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.20.1

Entry containing information of port Qos cosq Voq
cpp stats

Indexes

rcPrQosCosQueVoqCppPortStatsProtocolIndex

Column	Syntax	OID
rcPrQosCosQueVoqCppPortStatsProtocolIndex Used to indicate the protocol cos queue.	Enumeration Enumerated Values: 1 vrrp 2 vlacp 3 lacp 4 cfm 5 vrrpv6 6 istCtl 7 radius 8 ntp 9 icmpv4 10 slpp 11 bpdu 12 tdp 13 eap 14 lldp 15 ndMcv6 16 ndUcv6 17 rlogin 18 fragUcv6 19 isis 20 ospfMc 21 dhcp 22 pimMc 23 arpRequest 24 arpReply 25 rarpRequest 26 rarpRreply 27 icmpv4Bc 28 ospfv6Mc 29 ftp 30 tftp 31 snmp 32 telnet 33 ssh 34 rsh 35 http 36 dns 37 icmpMcv6 38 icmpUcv6 39 ipmcData 40 bgp 41 igmp 42 mld 43 pimUc 44 ospfUc 45 ospfv6Uc 46 hopByHop 47 ripv1 48 ripv2 49 ripv6 50 macLearning 51 internal1 52 dataException 53 ttlException 54 fragMcv6 55 internal2 56 internal3 57 ipfix 58 internal4	.1.3.6.1.4.1.2272.1.202.1.1.1.20.1.1
rcPrQosCosQueVoqCppPortStatsProtocolName Used to indicate the protocol name.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.2272.1.202.1.1.1.20.1.2
rcPrQosCosQueVoqCppPortStatsAcceptedPackets the accepted packets for cpp port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.20.1.3
rcPrQosCosQueVoqCppPortStatsAcceptedBytes the accepted bytes for cpp port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.20.1.4
rcPrQosCosQueVoqCppPortStatsDropPackets the drop packets for cpp port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.20.1.5
rcPrQosCosQueVoqCppPortStatsDropBytes the drop bytes for cpp port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.20.1.6

This table is used to get the qos cos queue Tunnel stats.

rcPrQosCosQueTunnelStatsEntry row .1.3.6.1.4.1.2272.1.202.1.1.1.21.1

Entry containing information of Tunnel Qos cosq stats

Indexes

rcPrQosCosQueTunnelStatsIndex

Column	Syntax	OID
rcPrQosCosQueTunnelStatsIndex Used to indicate the tunnel index.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.1
rcPrQosCosQueTunnelStatsQue0OutPackets the out packets for Cos queue 0.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.2
rcPrQosCosQueTunnelStatsQue0OutBytes the out bytes for Cos queue 0.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.3
rcPrQosCosQueTunnelStatsQue0DropPackets the drop packets for Cos queue 0.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.4
rcPrQosCosQueTunnelStatsQue0DropBytes the drop bytes for Cos queue 0.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.5
rcPrQosCosQueTunnelStatsQue1OutPackets the out packets for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.6
rcPrQosCosQueTunnelStatsQue1OutBytes the out bytes for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.7
rcPrQosCosQueTunnelStatsQue1DropPackets the drop packets for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.8
rcPrQosCosQueTunnelStatsQue1DropBytes the drop bytes for Cos queue 1.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.9
rcPrQosCosQueTunnelStatsQue2OutPackets the out packets for Cos queue 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.10
rcPrQosCosQueTunnelStatsQue2OutBytes the out bytes for Cos queue 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.11
rcPrQosCosQueTunnelStatsQue2DropPackets the drop packets for Cos queue 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.12
rcPrQosCosQueTunnelStatsQue2DropBytes the drop bytes for Cos queue 2.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.13
rcPrQosCosQueTunnelStatsQue3OutPackets the out packets for Cos queue 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.14
rcPrQosCosQueTunnelStatsQue3OutBytes the out bytes for Cos queue 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.15
rcPrQosCosQueTunnelStatsQue3DropPackets the drop packets for Cos queue 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.16
rcPrQosCosQueTunnelStatsQue3DropBytes the drop bytes for Cos queue 3.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.17
rcPrQosCosQueTunnelStatsQue4OutPackets the out packets for Cos queue 4.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.18
rcPrQosCosQueTunnelStatsQue4OutBytes the out bytes for Cos queue 4.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.19
rcPrQosCosQueTunnelStatsQue4DropPackets the drop packets for Cos queue 4.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.20
rcPrQosCosQueTunnelStatsQue4DropBytes the drop bytes for Cos queue 4.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.21
rcPrQosCosQueTunnelStatsQue5OutPackets the out packets for Cos queue 5.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.22
rcPrQosCosQueTunnelStatsQue5OutBytes the out bytes for Cos queue 5.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.23
rcPrQosCosQueTunnelStatsQue5DropPackets the drop packets for Cos queue 5.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.24
rcPrQosCosQueTunnelStatsQue5DropBytes the drop bytes for Cos queue 5.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.25
rcPrQosCosQueTunnelStatsQue6OutPackets the out packets for Cos queue 6.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.26
rcPrQosCosQueTunnelStatsQue6OutBytes the out bytes for Cos queue 6.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.27
rcPrQosCosQueTunnelStatsQue6DropPackets the drop packets for Cos queue 6.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.28
rcPrQosCosQueTunnelStatsQue6DropBytes the drop bytes for Cos queue 6.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.29
rcPrQosCosQueTunnelStatsQue7OutPackets the out packets for Cos queue 7.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.30
rcPrQosCosQueTunnelStatsQue7OutBytes the out bytes for Cos queue 7.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.31
rcPrQosCosQueTunnelStatsQue7DropPackets the drop packets for Cos queue 7.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.32
rcPrQosCosQueTunnelStatsQue7DropBytes the drop bytes for Cos queue 7.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.33
rcPrQosCosQueTunnelStatsClearStat Clear Stats.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.1.21.1.34

A table of Acts to store information of each Act
entry. This table is indexed by the Act Id.

rcPrFilterActEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1

One Act Entry holding Act information.

Indexes

rcPrFilterActId

Column	Syntax	OID
rcPrFilterActId A table of Acts to store information of each Act. This table is indexed by the Act Id.	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.1
rcPrFilterActName A descriptive name chosen by the administrator for the Act Entry.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.2
rcPrFilterActArpAttrs Value is one or multiple (logical 'OR' of the following): none(0), operation(1) none: No Arp Attrs are selected or to clear other choices. operation: Only valid option for Arp attributes.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.3
rcPrFilterActEthernetAttrs Value is one or multiple of the following: none(0), srcMac(1), dstMac(2), etherType(4), port(8), vlan(16), vlanTagPrio(32) none: If selected then unselect all other selections.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.4
rcPrFilterActIpAttrs Value is one or multiple of the following: none(0), srcIp(1), dstIp(2), ipFragFlag(4), ipOptions(8), ipProtoType(16), dscp(32) none: If selected then unselect all other selections.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.5
rcPrFilterActProtocolAttrs Value is one or multiple of the following: none(0), tcpSrcPort(1), udpSrcPort(2), tcpDstPort(4), udpDstPort(8), tcpFlags(16), icmpMsgType(32), icmpv6MsgType(64) none: If selected then unselect all other selections.	Integer32r/w Constraints: range: 0-127	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.6
rcPrFilterActApply When apply is issued by the administrator, the ACT attributes cannot be modified.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.7
rcPrFilterActRowStatus Create/delete operations for this entry. The entry cannot be modified or deleted while there are Acls configured with this Act entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.8
rcPrFilterActIpv6Attrs Value is one or multiple of the following: none(0), srcIpv6(1), dstIpv6(2), nextHdr(4), none: If selected then unselect all other selections.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.9

A table of user-defined parameters of  Acls to
store information of each Acl. This table is indexed
by the Act Id and PatternIndex.

rcPrFilterActPatternEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1

Entry containing Configuration information for a
particular Act.

Indexes

rcPrFilterActPatternActId rcPrFilterActPatternIndex

Column	Syntax	OID
rcPrFilterActPatternActId An index to the ActPatternEntry, a unique identifier for Act entry in the range of Table Size.	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.1
rcPrFilterActPatternIndex Indexes each user defined field pattern in an Acl entry. In this release only 3 patterns are allowed per ACT but we can have multiple patterns per ACL.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.2
rcPrFilterActPatternName A descriptive name chosen by the administrator for the Acl Pattern Entry.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.3
rcPrFilterActPatternBase User defined fields from headers to be used in the Aces of the Acl.	Enumerationr/w Enumerated Values: 0 none 1 etherBegin 2 macDstBegin 3 macSrcBegin 4 ethTypeLenBegin 5 arpBegin 6 ipHdrBegin 7 ipOptionsBegin 8 ipPayloadBegin 9 ipTosBegin 10 ipProtoBegin 11 ipSrcBegin 12 ipDstBegin 13 tcpBegin 14 tcpSrcportBegin 15 tcpDstportBegin 16 tcpFlagsEnd 17 udpBegin 18 udpSrcportBegin 19 udpDstportBegin 20 etherEnd 21 ipHdrEnd 22 icmpMsgBegin 23 tcpEnd 24 udpEnd 25 ipv6HdrBegin	.1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.4
rcPrFilterActPatternOffset Set Offset in bits to the beginning offset of the user defined field with selected header option as base.	Integer32r/w Constraints: range: 0-76800	.1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.5
rcPrFilterActPatternLength The number of bits to extract beginning from the offset is set in rcPrFilterActPatternLength. Only 1-56 are valid.	Integer32r/w Constraints: range: 0-56	.1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.6
rcPrFilterActPatternRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.7

A table of Acls to store information of each Acl.
This table is indexed by the Acl Id.

rcPrFilterAclEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1

Entry containing Configuration information for
a particular Acl.

Indexes

rcPrFilterAclId

Column	Syntax	OID
rcPrFilterAclId A unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.1
rcPrFilterAclActId A unique identifier for Act entry in the range of Table Size.	Integer32r/w Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.2
rcPrFilterAclName A descriptive name chosen by the administrator for the Acl Entry.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.3
rcPrFilterAclType An Acl can be vlan-based or port-based. An Ace has a capability to match packets classified as 'ingress' and 'egress'. An ingress packet is assigned a value 'in' and an egress packet is assigned a value 'out'.	Enumerationr/w Enumerated Values: 1 inVlan 2 outVlan 3 inPort 4 outPort 5 inVsn	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.4
rcPrFilterAclAceListSize Indicates the number of Aces in a particular Acl.	Integer32 Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.5
rcPrFilterAclDefaultAction Indicates action to be taken when none of the Aces in the Acl match.	Enumerationr/w Enumerated Values: 1 deny 2 permit	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.6
rcPrFilterAclGlobalAction Indicates action is applied to all Aces that match in an Acl.	Enumerationr/w Enumerated Values: 1 none 2 mirror 3 count 4 mirror-count 5 ipfix 6 mirror-ipfix 7 count-ipfix 8 mirror-count-ipfix	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.7
rcPrFilterAclState Enables/Disables the state of all Aces in the Acl	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.8
rcPrFilterAclVlanList An array used to indicate all the VLANs to be associated with this Acl Entry. At present, only 4k Vlans are supported.	OctetStringr/w Constraints: range: 4096-4096	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.9
rcPrFilterAclPortList Indicates the ports to be added to this Acl Entry.	RAPID-CITYPortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.10
rcPrFilterAclRowStatus Create/delete operations for the entry. Deleting a non-empty Acl results in deletion of member Aces and then the Acl.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.11
rcPrFilterAclNumVlanIds Used to Indicate the number of VLAN ID's that are stored in the rcPrFilterAclVlanList.	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.12
rcPrFilterAclPktType Indicates the packet type that this ACL is applicable to. VSP9k introduced nonipv6(3) to replace the ipv4(1) in release VSP 3.4.0.0. It means that ipv4(1) i snot applicable to VSP9k. And the default value in VSP is also…	Enumerationr/w Enumerated Values: 1 ipv4 2 ipv6 3 nonipv6	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.13
rcPrFilterAclControlPktRule When the rcPrFilterAclDefaultAction object is set to deny then control packets follow this rule. Otherwise, the object value can be ignored.	Enumerationr/w Enumerated Values: 1 deny 2 permit	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.14
rcPrFilterAclVlanId Destination Vlan Id for mirroring the packets. The value 0 means no vlan is being mirrored. When the value of rcPrFilterAclVlanId is non-zero, the values of rcPrFilterAclMltId and rcPrFilterAclDstPortList must be 0.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.15
rcPrFilterAclMltId Destination Mlt Id for mirroring the packets. The value 0 means no mlt is being mirrored. When the value of rcPrFilterAclMltId is non-zero, the values of rcPrFilterAclVlanId and rcPrFilterAclDstPortList must be 0.	Integer32r/w Constraints: range: 0-512	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.16
rcPrFilterAclDstPortList Destination Port List for mirroring the packets. The value 0 means no port(s) is being mirrored. When the value of rcPrFilterAclDstPortList is non-zero, the values of rcPrFilterAclVlanId and rcPr…	RAPID-CITYPortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.17
rcPrFilterAclIpfixState Value indicating whether ipfix option on the Acl is enabled.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.18
rcPrFilterAclMatchType Indicates the match type that the traffic is ingress on UNI or terminated NNI or both	Enumerationr/w Enumerated Values: 1 uniOnly 2 terminatingNNIOnly 3 both	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.19
rcPrFilterAclIsid For IP shortcut, I-SID is zero. For L3 vsn, Inter I-SID routing, I-SID is configured I-SID value ie other than zero.	Integer32r/w Constraints: range: 0-15999999	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.20
rcPrFilterAclOrigin Indicates how the ACL was created. Supported values: config - ACL created by user eap - ACL created by EAP via Radius response	Bits Enumerated Values: 0 config 1 eap	.1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.21

A table of Acls Statistics entries to store the 
Default Acl statistics for each Acl. 
This table is indexed by the Acl Id.

rcPrFilterAclStatsEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1

Entry containing default statistics information for
a particular Acl.

Indexes

rcPrFilterAclStatsAclId

Column	Syntax	OID
rcPrFilterAclStatsAclId A unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.1
rcPrFilterAclStatsMatchDefaultCounterPkts Packet count of traffic not matching any of the Ace rules or hit the Default Action that have the count bit turned on in Acl Global Action.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.2
rcPrFilterAclStatsMatchDefaultOctets Byte count of traffic not matching any of the Ace rules or hit the Default Action that have the count bit turned on in Acl Global Action.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.3
rcPrFilterAclStatsClear Clear default statistics for ACL Filters.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.4
rcPrFilterAclStatsMatchDefaultSecurityPkts Security packet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.5
rcPrFilterAclStatsMatchDefaultSecurityOctets Security octet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.6
rcPrFilterAclStatsMatchDefaultQosPkts QOS packet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.7
rcPrFilterAclStatsMatchDefaultQosOctets QOS octet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.8
rcPrFilterAclStatsMatchGlobalSecurityPkts Security packet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.9
rcPrFilterAclStatsMatchGlobalSecurityOctets Security octet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.10
rcPrFilterAclStatsMatchGlobalQosPkts QOS packet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.11
rcPrFilterAclStatsMatchGlobalQosOctets QOS octet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.12

A table of Aces to store information of each Ace
in context of its parent Acl. This is indexed by
AclId and AceId.

rcPrFilterAceEntry row .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1

One Ace entry holding Ace information. Ace is a
member of one Acl.

Indexes

rcPrFilterAceAclId rcPrFilterAceId

Column	Syntax	OID
rcPrFilterAceAclId An index to the AceEntry, a unique identifier for Acl entry in the range of Table Size.	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.1
rcPrFilterAceId AceId uniquely identifies one Ace entry.	Integer32 Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.2
rcPrFilterAceName A descriptive name chosen by the administrator. System automatically assigns a name if the user has not assigned one.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.3
rcPrFilterAceMode Operating Mode associated with the Ace is effective on the packets matching this Ace.	Enumerationr/w Enumerated Values: 0 none 1 deny 2 permit	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.4
rcPrFilterAceRemarkDscp The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (like EF) or PHB-class(like AF1 which includes AF11, AF12,AF13)…	Enumerationr/w Enumerated Values: 0 phbcs0 8 phbcs1 10 phbaf11 12 phbaf12 14 phbaf13 16 phbcs2 18 phbaf21 20 phbaf22 22 phbaf23 24 phbcs3 26 phbaf31 28 phbaf32 30 phbaf33 32 phbcs4 34 phbaf41 36 phbaf42 38 phbaf43 40 phbcs5 46 phbef 48 phbcs6 56 phbcs7 256 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.5
rcPrFilterAceRemarkDot1Priority Dot1 Priority as described by Layer 2 standards, 802.1Q, 802.1P.	Enumerationr/w Enumerated Values: 0 zero 1 one 2 two 3 three 4 four 5 five 6 six 7 seven 8 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.6
rcPrFilterAceRedirectNextHop Redirect matching IP traffic to the next hop.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.7
rcPrFilterAceRedirectUnreach Set the desired behavior for redirected traffic in case the specified next-hop is not reachable.	Enumerationr/w Enumerated Values: 1 deny 2 permit	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.8
rcPrFilterAcePolice Policing profile Identifier. Set the desired policing profile identifier. Set the value to 0 when policing is not desired.	Integer32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.9
rcPrFilterAceAdminState Value indicating whether the Ace is enabled. An Ace can only be modified if it is disabled.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.10
rcPrFilterAceOperState The current operational state of the Ace.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.11
rcPrFilterAceEgressQueue Indicates the Egress Queue for 10/100 card. If only 1 value is specified then this value is applied to Queue1g and Queue10g as well. If 2 values are specified then the first value is applied to 10/100 card and the sec…	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.12
rcPrFilterAceEgressQueue1g Indicates the Egress Queue for 1gig card.	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.13
rcPrFilterAceEgressQueue10g Indicates the Egress Queue for 10gig card.	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.14
rcPrFilterAceEgressQueueNNSC Ace Egress Queue NNSC.	Enumerationr/w Enumerated Values: 0 platinum 1 gold 2 silver 3 bronze 4 standard 5 custom 6 premium 7 critical 8 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.15
rcPrFilterAceFlags Bitmask for the flags: none(0): Default value for the flags. stopOnMatch(1): set desired behavior for flag whether to stop or continue in case an Ace matching the packet is found. Whe…	Integer32r/w Constraints: range: 0-31	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.16
rcPrFilterAceStopOnMatch Value indicating whether stop-on-match option on the Ace is enabled.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.17
rcPrFilterAceMltIndex If this action is specified, it will basically override the mlt-index picked by the mlt algorithm, when a packet is being sent out on MLT ports.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.18
rcPrFilterAceRowStatus Create/delete operations for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.19
rcPrFilterAceIpfixState Value indicating whether ipfix option on the Ace is enabled.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.20
rcPrFilterAceRedirectNextHopIpv6 Redirect matching IPv6 traffic to the next hop.	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.21
rcPrFilterAceDstPortList Destination Port List for mirroring the packets.	RAPID-CITYPortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.22
rcPrFilterAceDstVlanId Destination Vlan to mirror the packets.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.23
rcPrFilterAceDstMltId Destination Mlt to mirror the packets.	Integer32r/w Constraints: range: 0-256	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.24
rcPrFilterAceInternalQos Internal QOS Level assigned to the packet flow	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.25
rcPrFilterAceCount Value indicating whether Count option on the Ace is enabled.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.26
rcPrFilterAceLog Value indicating whether log option on the Ace is enabled.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.27
rcPrFilterAceCopytoPcap Value indicating whether copy to pcap option on the Ace is enabled.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.28
rcPrFilterAceDstIp Destination IP address to mirror the packets.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.29
rcPrFilterAceDstIpTtl Ttl value for the mirrored packet when mirror destination is IP. If other than default, the encapsulated packet will have the given ttl.	Integer32r/w Constraints: range: 2-255	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.30
rcPrFilterAceDstIpDscp Dscp value for the mirrored packet when mirror destination is IP. The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to …	Enumerationr/w Enumerated Values: 0 phbcs0 8 phbcs1 10 phbaf11 12 phbaf12 14 phbaf13 16 phbcs2 18 phbaf21 20 phbaf22 22 phbaf23 24 phbcs3 26 phbaf31 28 phbaf32 30 phbaf33 32 phbcs4 34 phbaf41 36 phbaf42 38 phbaf43 40 phbcs5 46 phbef 48 phbcs6 56 phbcs7 256 disable	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.31
rcPrFilterAceMonitoringIsidOffset Used to configure the monitoring ISID offset value. The offset id value is mapped to actual monitor I-SID value in which packets are mirrored to.	Integer32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.32
rcPrFilterAceMonitoringIsid Actual monitor I-SID value in which packets are mirrored to.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.33
rcPrFilterAceMirroringQos Used to define the Quality of Service (QoS) profiles for the mirrored packet into monitoring ISID.	Integer32r/w Constraints: range: 0-5	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.34
rcPrFilterAceRemoveTag Used to remove inner vlan tag of the mirrored packet into the SPB network. By default, it is set to false and vlan tag will not be removed.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.35
rcPrFilterAceRedirectNextHopVrfName VRF Name associated with IP/IPv6 redirect next hop.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.36