RC-OSPF-MIB Table View

A table used to maintain OSPF information
for a particular interface.

rcIpConfOspfEntry row .1.3.6.1.4.1.2272.1.8.1.2.1

Entry containing OSPF information. An entry is
automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.

Indexes

rcIpConfOspfIfIndex

Column	Syntax	OID
rcIpConfOspfIfIndex An unique value to identify a physical interface or a logical interface (VLAN).	Integer32 Constraints: range: 0-6143	.1.3.6.1.4.1.2272.1.8.1.2.1.1
rcIpConfOspfRtrPriority The priority of this interface. Used in multi- access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on …	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.1.2.1.2
rcIpConfOspfMetric The metric for this type of service (TOS) on this interface. The default value of the TOS 0 Metric is (10^9 / ifSpeed). The value FFFF means 'no route via this TOS'. A value of 0 means the interface speed (rcIpConfO…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.1.2.1.3
rcIpConfOspfAuthKey The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated …	OctetStringr/w Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.8.1.2.1.4
rcIpConfOspfRowStatus Row status for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.1.2.1.5
rcIpConfOspfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.8.1.2.1.6
rcIpConfOspfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers at…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.1.2.1.7
rcIpConfOspfIfAreaId A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.1.2.1.8
rcIpConfOspfAuthType The authentication type specified for an interface. Additional authentication types may be assigned locally.	Enumerationr/w Enumerated Values: 0 none 1 simplePassword 2 md5 3 sha1 4 sha2	.1.3.6.1.4.1.2272.1.8.1.2.1.9
rcIpConfOspfPollInterval OSPF NBMA Interface Poll Interval.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.1.2.1.10
rcIpConfOspfIfMtuIgnore Mtu-ignore flag is for ignoring the mtu checking in ospf bdb	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.1.2.1.11
rcIpConfOspfBfdEnable Used to enable/disable BFD for OSPF.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.1.2.1.12

A table used to maintain OSPF information
for a particular Area.

rcIpConfOspfAreaEntry row .1.3.6.1.4.1.2272.1.8.1.7.1

Entry containing OSPF Area configuration
information. An entry is automatically created
in this table when an area is configured through
ospfAreaTable in (rfc1253rcc.mib).

Indexes

rcIpConfOspfAreaId

Column	Syntax	OID
rcIpConfOspfAreaId An unique value to identify an area. Area ID 0.0.0.0 is used for the OSPF backbone.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.1.7.1.1
rcIpConfOspfAreaImportSummary The area's support for importing Summary advertisements into a stub area. This field should be used only if ospfImportASExtern is set to FALSE	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.7.1.2
rcIpConfOspfAreaActiveIfCount This variable displays the number of active interfaces configured in this area. An area cannot be deleted if this value is > 0.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.1.7.1.3

A table used to maintain OSPF summary route
metric parameter for a particular Area range.

rcIpConfOspfAreaAggregateEntry row .1.3.6.1.4.1.2272.1.8.1.10.1

Entry containing OSPF summary route metric
parameter for a particular Area range.
An entry is automatically created in this
table when an area range is configured through
ospfAreaAggregateTable in rfc1850rcc.mib

Indexes

rcIpConfOspfAreaAggregateAreaID rcIpConfOspfAreaAggregateLsdbType rcIpConfOspfAreaAggregateNet rcIpConfOspfAreaAggregateMask

Column	Syntax	OID
rcIpConfOspfAreaAggregateAreaID The Area the Address Aggregate is to be found within.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.1.10.1.1
rcIpConfOspfAreaAggregateLsdbType The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to.	Enumeration Enumerated Values: 3 summaryLink 7 nssaExternalLink	.1.3.6.1.4.1.2272.1.8.1.10.1.2
rcIpConfOspfAreaAggregateNet The IP Address of the Net or Subnet indicated by the range.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.1.10.1.3
rcIpConfOspfAreaAggregateMask The Subnet Mask that pertains to the Net or Subnet.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.1.10.1.4
rcIpConfOspfAreaAggregateAdvertiseMetric Used to specify a metric for a Summary LSA (type 3) generated by OSPF through an area range. If this metric is set to 0, OSPF uses the cost to the farthest point in the networks being summarized as the metric.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.1.10.1.5
rcIpConfOspfAreaAggregateEffect Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the subnet's not being advertised at all outside the area.	Enumerationr/w Enumerated Values: 1 advertiseMatching 2 doNotAdvertiseMatching 3 advertiseDoNotAggregate	.1.3.6.1.4.1.2272.1.8.1.10.1.6

A table used to store OSPF interface
statistics.

rcStatOspfIfEntry row .1.3.6.1.4.1.2272.1.12.5.1

Ospf interface statistics

Indexes

rcStatOspfIfIndex

Column	Syntax	OID
rcStatOspfIfIndex An unique value that is used to identify a physical interface.	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.12.5.1.1
rcStatOspfIfRxHellos Used to indicate the number hello packets received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.2
rcStatOspfIfRxDBDescrs Used to indicate the number database descriptor packets received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.3
rcStatOspfIfRxLSUpdates Used to indicate the number Link state update packets received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.4
rcStatOspfIfRxLSReqs Used to indicate the number Link state request packets received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.5
rcStatOspfIfRxLSAcks Used to indicate the number Link state acknowlege packets received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.6
rcStatOspfIfTxHellos Used to indicate the number hello packets transmitted by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.7
rcStatOspfIfTxDBDescrs Used to indicate the number database descriptor packets transmitted by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.8
rcStatOspfIfTxLSUpdates Used to indicate the number Link state update packets transmitted by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.9
rcStatOspfIfTxLSReqs Used to indicate the number Link state request packets transmitted by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.10
rcStatOspfIfTxLSAcks Used to indicate the number Link state acknowlege packets transmitted by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.11
rcStatOspfIfVersionMismatches Used to indicate the number version mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.12
rcStatOspfIfAreaMismatches Used to indicate the number area mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.13
rcStatOspfIfAuthTypeMismatches Used to indicate the number AuthType mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.14
rcStatOspfIfAuthFailures Used to indicate the number Authentication failures.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.15
rcStatOspfIfNetMaskMismatches Used to indicate the number net mask mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.16
rcStatOspfIfHelloIntervalMismatches Used to indicate the number hello interval mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.17
rcStatOspfIfDeadIntervalMismatches Used to indicate the number dead interval mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.18
rcStatOspfIfOptionMismatches Used to indicate the number options mismatches received by this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.12.5.1.19
rcStatOspfIfClearStats Used to clear the OSPF interface statistics. If set is done for IfIndex 0, will clear all table entries	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.12.5.1.20