RC-MLD-MIB Table View

The (conceptual) table listing the multicast
groups configured in the device.

rcMldNewGroupEntry row .1.3.6.1.4.1.2272.1.215.1.1.1

An entry (conceptual row) representing an
Mld group.

Indexes

rcMldNewGroupIpv6Address rcMldNewGroupMembers rcMldNewGroupInPort

Column	Syntax	OID
rcMldNewGroupIpv6Address Multicast Group Address that others want to join to. A group address can be the same for many incoming ports.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.1.1.1
rcMldNewGroupMembers IP Address of a source that has sent group report wishing to join this group.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.1.1.2
rcMldNewGroupInPort An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.215.1.1.1.3
rcMldNewGroupExpiration Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.215.1.1.1.4
rcMldNewGroupIfIndex An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.215.1.1.1.5

The table listing the multicast groups
traversing the snoop enabled router

rcMldSnoopTraceEntry row .1.3.6.1.4.1.2272.1.215.1.4.1

The entry listing the multicast groups
traversing the snoop enabled router

Indexes

rcMldSnoopGrpAddr rcMldSnoopSrcAddr rcMldSnoopOutVlan

Column	Syntax	OID
rcMldSnoopGrpAddr Ip multicast address of group traversing the router	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.4.1.1
rcMldSnoopSrcAddr Ip source address of the multicast group address	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.4.1.2
rcMldSnoopOutVlan Egress vlan id for the multicast group	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.215.1.4.1.3
rcMldSnoopInPort Ingress port for the multicast group	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.215.1.4.1.4
rcMldSnoopInVlan Ingress vlan id for the multicast source	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.215.1.4.1.5
rcMldSnoopOutPort Egress port of the multicast group	RAPID-CITYPortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.215.1.4.1.6
rcMldSnoopType The port type on which the snoop entry is learnt	Enumeration Enumerated Values: 1 network 2 access	.1.3.6.1.4.1.2272.1.215.1.4.1.7

The (conceptual) table listing the MLDv2 specific data
corresponding to each interface, port  and multicast group pair on
a Router.

rcMldv2CacheEntry row .1.3.6.1.4.1.2272.1.215.1.5.1

An entry (conceptual row) representing an Mldv2 Group.

Indexes

rcMldv2CacheEntryGroupAddress rcMldv2CacheEntryIfIndex rcMldv2CacheEntryInPort

Column	Syntax	OID
rcMldv2CacheEntryGroupAddress Multicast group Address that others want to join. A group address can be the same for many incoming ports.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.5.1.1
rcMldv2CacheEntryIfIndex An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.215.1.5.1.2
rcMldv2CacheEntryInPort An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.215.1.5.1.3
rcMldv2CacheEntryVersion1HostTimer The time remaining until the local router will assume that there are no longer any MLD version 1 members on the IP subnet attached to this interface. This entry only applies to MLDv1 hosts. Upon hearing any MLDv1 Repor…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.215.1.5.1.5
rcMldv2CacheEntrySourceFilterMode The current group state, applicable to MLDv2-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE.	Enumeration Enumerated Values: 1 include 2 exclude	.1.3.6.1.4.1.2272.1.215.1.5.1.6

The (conceptual) table listing the Source List entries
corresponding to each interface and multicast group pair on
a Router.

rcMldRouterSrcListEntry row .1.3.6.1.4.1.2272.1.215.1.6.1

An entry (conceptual row) representing an
Mld Source.

Indexes

rcMldRouterSrcListGroupAddress rcMldRouterSrcListIfIndex rcMldRouterSrcListInPort rcMldRouterSrcListHostAddress rcMldRouterSrcListMemberAddress

Column	Syntax	OID
rcMldRouterSrcListGroupAddress The IPv6 multicast group address for which this entry contains information.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.6.1.1
rcMldRouterSrcListIfIndex The interface for which this entry contains information for an IP multicast group address.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.215.1.6.1.2
rcMldRouterSrcListInPort An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports for this source.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.215.1.6.1.3
rcMldRouterSrcListHostAddress The host address to which this entry corresponds.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.6.1.4
rcMldRouterSrcListMemberAddress IPv6 Address of a member that has sent source specific report wishing to join this source.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.6.1.5
rcMldRouterSrcListExpire This value indicates the relevance of the SrcList entry, whereby a non-zero value indicates this is an INCLUDE state value, and a zero value indicates this to be an EXCLUDE state value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.215.1.6.1.6
rcMldRouterSrcListMode The current member state, applicable to MLDv2-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE.	Enumeration Enumerated Values: 1 include 2 exclude	.1.3.6.1.4.1.2272.1.215.1.6.1.7
rcMldRouterSrcListMemberExpire This value indicates the time until the member for this source will expire	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.215.1.6.1.8

The (conceptual) table listing the multicast
senders.

rcMldSenderEntry row .1.3.6.1.4.1.2272.1.215.1.7.1

An entry (conceptual row) representing an
MLD senser.

Indexes

rcMldSenderGrpAddr rcMldSenderIfIndex rcMldSenderMemberAddr

Column	Syntax	OID
rcMldSenderGrpAddr IPv6 multicast group address.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.7.1.1
rcMldSenderIfIndex Interface index of the sender.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.215.1.7.1.2
rcMldSenderMemberAddr Ipv6 Host Address.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.215.1.7.1.3
rcMldSenderAction none(1), flushEntry(2), flushGrp(3).	Enumerationr/w Enumerated Values: 1 none 2 flushEntry 3 flushGrp	.1.3.6.1.4.1.2272.1.215.1.7.1.4
rcMldSenderPort Mld Sender port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.215.1.7.1.5