RC-ISIS-MIB Table View

Table of IS-IS Circuit, this is extension
to the isisCircTable defined in ISIS MIB

rcIsisCircuitEntry row .1.3.6.1.4.1.2272.1.63.2.1

An entry of rcIsisCircuit Table. A Entry in
table exists for each ISIS circuit created

Indexes

rcIsisCircuitIndex

Column	Syntax	OID
rcIsisCircuitIndex The identifier of this circuit, unique within the Intermediate System. This object follows the index behavior. This is for SNMP Indexing purposes only and need not have any relation to any protocol value.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.63.2.1.1
rcIsisCircuitType ISIS circuit type this is an extention to ISIS circuit table, this was required a standard MIB circuit type does not support passive type	Enumerationr/w Enumerated Values: 1 bcast 2 ptpt 3 passive	.1.3.6.1.4.1.2272.1.63.2.1.2
rcIsisCircuitAuthType Authentication type for IIH to be sent/reveived on the circuit/interface	Enumerationr/w Enumerated Values: 0 none 1 simple 2 hmac-md5	.1.3.6.1.4.1.2272.1.63.2.1.3
rcIsisCircuitKeyId Authentication key id related to IIH key This can be set only if the auth-type is hmac-md5	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.63.2.1.4
rcIsisCircuitAuthKey Authentication key to be used to authenticate IIH sent/reveived on the circuit/interface	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.63.2.1.5
rcIsisCircuitAddr IP address associated with the interface	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.2.1.6
rcIsisCircuitMask IP mask associated with the interface	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.2.1.7
rcIsisCircuitOperState This variable tells the operating state of circ	Enumeration Enumerated Values: 0 unknown 1 up 2 down	.1.3.6.1.4.1.2272.1.63.2.1.8
rcIsisCircuitNumAdj NUmber of adjacencies	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.2.1.9
rcIsisCircuitNumUpAdj Number of adjancencies which are UP	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.2.1.10
rcIsisCircuitAutoNniEnable Set to true if user wants to auto create the NNI interface. This will create a entry in this table and in rcIsisCircuitPlsbTablei, associating this ciruit to the first available SPBM instance.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.63.2.1.11
rcIsisCircuitOrigin Describes how IsisCircuitEntry was created: manual (SNMP/CLI), ZTF(Auto-Sense) or other.	Enumeration Enumerated Values: 1 config 2 autoSense	.1.3.6.1.4.1.2272.1.63.2.1.12

Table of PLSB under IS-IS

rcIsisPlsbEntry row .1.3.6.1.4.1.2272.1.63.4.1

An entry of rcIsisPlsb Table. A Entry in
table exists for each plsb instance created

Indexes

rcIsisPlsbId

Column	Syntax	OID
rcIsisPlsbId PLSB instance ID	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.63.4.1.1
rcIsisPlsbRowStatus The state of the rcIsisPlsbEntry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.63.4.1.2
rcIsisPlsbNodeNickName PLSB node's nickname is used to calculate ISID multicast mac address.	IsisPlsbNodeNickNamer/w Type Constraints: range: 3	.1.3.6.1.4.1.2272.1.63.4.1.3
rcIsisPlsbVlans PLSB ISIS vlans for a PLSB instance.	OctetStringr/w Constraints: range: 512-512	.1.3.6.1.4.1.2272.1.63.4.1.4
rcIsisPlsbLsdbTrap isis PLSB lsdb update trap enable on this plsb instance	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.63.4.1.5
rcIsisPlsbState enable/disable PLSB.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.63.4.1.6
rcIsisPlsbIpShortcut ISIS PLSB IP shortcut enabled	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.63.4.1.7
rcIsisPlsbPrimaryVlan Primary Vlan Id for this plsb instance.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.4.1.8
rcIsisPlsbSmltSplitBEB ISIS PLSB SMLT split BEB for this plsb instance.	Enumeration Enumerated Values: 1 primary 2 secondary	.1.3.6.1.4.1.2272.1.63.4.1.9
rcIsisPlsbSmltBmac ISIS PLSB SMLT virtual MAC for this plsb instance.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.4.1.10
rcIsisPlsbSmltPeerSysId ISIS PLSB SMLT Peer's system-id for this plsb instance.	IsisSystemIDr/w Type Constraints: range: 6	.1.3.6.1.4.1.2272.1.63.4.1.11
rcIsisPlsbMcast ISIS PLSB Multicast enable	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.63.4.1.12
rcIsisPlsbMcastFwdCacheTimeout Multicast Fwd Cache Timeout in seconds	Integer32r/w Constraints: range: 10-86400	.1.3.6.1.4.1.2272.1.63.4.1.13
rcIsisPlsbIpv6Shortcut ISIS PLSB IPv6 shortcut enabled	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.63.4.1.14
rcIsisPlsbMcastSpbPimGwControllerEnable ISIS PLSB Multicast SPB PIM Gateway controller enable/disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.63.4.1.15
rcIsisPlsbMcastSpbPimGwGatewayEnable ISIS PLSB Multicast SPB PIM Gateway enable/disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.63.4.1.16
rcIsisPlsbStpMultiHoming Fabric Multi-Homing is supported enable/disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.63.4.1.17
rcIsisPlsbBVlanOrigin Describes how rcIsisPlsbEntry was created: manual (SNMP/CLI), ZTF(Auto-Sense) or other.	Enumeration Enumerated Values: 1 dynamic 2 config	.1.3.6.1.4.1.2272.1.63.4.1.18

Table of IS-IS Circuit PLSB instance

rcIsisCircuitPlsbEntry row .1.3.6.1.4.1.2272.1.63.5.1

An entry of rcIsisCircuitPlsb Table. A Entry in
table exists for each PLSB instance under a ISIS
circuit created

Indexes

rcIsisCircuitPlsbIndex rcIsisCircuitPlsbId

Column	Syntax	OID
rcIsisCircuitPlsbIndex The identifier of this circuit, unique within the Intermediate System. This object follows the index behavior. This is for SNMP Indexing purposes only and need not have any relation to any protocol value.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2272.1.63.5.1.1
rcIsisCircuitPlsbId PLSB instance ID	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.63.5.1.2
rcIsisCircuitPlsbRowStatus The state of the rcIsisCircuitPlsbEntry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.63.5.1.3
rcIsisCircuitPlsbState PLSB functionality enable on this Plsb instance at this port. Disable value is not allowed to be set.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.63.5.1.4
rcIsisCircuitPlsbType ISIS circuit type this is an extention to ISIS circuit table, this was required a standard MIB circuit type does not support passive type	Enumerationr/w Enumerated Values: 1 bcast 2 ptpt	.1.3.6.1.4.1.2272.1.63.5.1.5
rcIsisCircuitPlsbL1Metric The metric value of this circuit for this level.	IsisDefaultL1Metricr/w Type Constraints: range: 1..63	.1.3.6.1.4.1.2272.1.63.5.1.6
rcIsisCircuitPlsbWideL1Metric The metric value of this circuit for this level.	IsisWideL1Metricr/w Type Constraints: range: 1..16777215	.1.3.6.1.4.1.2272.1.63.5.1.7
rcIsisCircuitPlsbOperationalWideL1Metric The negotiated metric value of this circuit for this level. In case of a metric mismatch between the Pt-to-Pt neighbor, the higher value will be used in path calculation.	IsisWideL1Metric Type Constraints: range: 1..16777215	.1.3.6.1.4.1.2272.1.63.5.1.8
rcIsisCircuitPlsbOrigin Describes how IsisCircPlsb was created: manual (CLI), dynamic (ZTF) or other.	Enumeration Enumerated Values: 1 config 2 autoSense	.1.3.6.1.4.1.2272.1.63.5.1.9

Table of IS-IS PLSB Unicast FIB

rcIsisPlsbUnicastFibEntry row .1.3.6.1.4.1.2272.1.63.6.1

An entry of rcIsisPlsbUnicastFib Table. A Entry in
table exists for each PLSB unicast forwarding entry
generated by ISIS SPF computation

Indexes

rcIsisPlsbUnicastFibDestinationMacAddr rcIsisPlsbUnicastFibVlan rcIsisPlsbUnicastFibSysId

Column	Syntax	OID
rcIsisPlsbUnicastFibDestinationMacAddr Destination Mac Address of the unicast FIB entry	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.6.1.1
rcIsisPlsbUnicastFibVlan Vlan of the unicast FIB entry	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.6.1.2
rcIsisPlsbUnicastFibSysId System ID of the node where unicast FIB entry come from	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.63.6.1.3
rcIsisPlsbUnicastFibOutgoingPort Outgoing port of the unicast Fib entry.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.63.6.1.4

Table of IS-IS PLSB Multicast FIB

rcIsisPlsbMulticastFibEntry row .1.3.6.1.4.1.2272.1.63.7.1

An entry of rcIsisPlsbmulticastFib Table. A Entry in
table exists for each PLSB Multicast forwarding entry
generated by ISIS SPF computation

Indexes

rcIsisPlsbMulticastFibMcastDestMacAddr rcIsisPlsbMulticastFibVlan rcIsisPlsbMulticastFibSysId

Column	Syntax	OID
rcIsisPlsbMulticastFibMcastDestMacAddr Multicast destination Mac Address of the multicast FIB entry	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.7.1.1
rcIsisPlsbMulticastFibVlan Vlan of the multicast FIB entry	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.7.1.2
rcIsisPlsbMulticastFibSysId System ID of the node where multicast FIB entry come from	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.63.7.1.3
rcIsisPlsbMulticastFibIsid Isid id of the multicast FIB entry	Integer32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.63.7.1.4
rcIsisPlsbMulticastFibOutgoingPorts Nni port of the multicast Fib entry.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.63.7.1.5

Table of IS-IS PLSB ISID

rcIsisPlsbIsidEntry row .1.3.6.1.4.1.2272.1.63.8.1

An entry of rcIsisPlsbIsid Table. A Entry in
table exists for each PLSB i-sid configed or discovered
by IS-IS

Indexes

rcIsisPlsbIsidSourceName rcIsisPlsbIsidId rcIsisPlsbIsidSysId

Column	Syntax	OID
rcIsisPlsbIsidSourceName nick name of node where this i-sid got configed or discovered	Integer32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.63.8.1.1
rcIsisPlsbIsidId IS-IS PLSB Isid id	Integer32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.63.8.1.2
rcIsisPlsbIsidSysId System ID of the node where multicast FIB entry come from	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.63.8.1.3
rcIsisPlsbIsidType PLSB i-sid type	Enumeration Enumerated Values: 1 config 2 discover	.1.3.6.1.4.1.2272.1.63.8.1.4

Table of IS-IS Adjacency, this is extension
to the isisISAdjTable defined in ISIS MIB

rcIsisAdjEntry row .1.3.6.1.4.1.2272.1.63.10.1

An entry of rcIsisAdj Table. A Entry in
table exists for each ISIS adjacency

Indexes

rcIsisAdjCircIndex rcIsisAdjIndex

Column	Syntax	OID
rcIsisAdjCircIndex The identifier of this circuit, unique within the Intermediate System. This object follows the index behavior. This is for SNMP Indexing purposes only and need not have any relation to any protocol value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.10.1.1
rcIsisAdjIndex A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is automatically assigned by the system when the adjacency is created.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2272.1.63.10.1.2
rcIsisAdjHostName The hostname listed in LSP, or the system name if host name is not configured.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.63.10.1.3
rcIsisAdjIfIndex The value of ifIndex for the interface to which this circuit corresponds.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.63.10.1.4
rcIsisAdjParallelActive A flag to indicate current adjacency is active or not among all the parallel adjacencies between two nodes.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.63.10.1.5

Table of IS-IS LSP, this is extension
to the isisLSPSummaryTable defined in ISIS MIB

rcIsisLSPEntry row .1.3.6.1.4.1.2272.1.63.11.1

An entry of rcIsisLSP Table. A Entry in
table exists for each ISIS LSP

Indexes

rcIsisLSPLevel rcIsisLSPID

Column	Syntax	OID
rcIsisLSPLevel At which level does this LSP appear?	Enumeration Enumerated Values: 1 area 2 domain	.1.3.6.1.4.1.2272.1.63.11.1.1
rcIsisLSPID The 8 byte LSP ID, consisting of the SystemID, Circuit ID, and Fragment Number.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.2272.1.63.11.1.2
rcIsisLSPSeq The sequence number for this LSP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.63.11.1.3
rcIsisLSPHostName The hostname listed in LSP, or the system name if host name is not configured.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.63.11.1.4
rcIsisLSPNickName PLSB node's nickname	Integer32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.63.11.1.5
rcIsisLSPLifetimeRemain The remaining lifetime in seconds for this LSP.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.63.11.1.6
rcIsisLSPSmltBmac SPBM node's SMLT virtual BMAC	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.11.1.7

Table of IS-IS PLSB IP Unicast FIB

rcIsisPlsbIpUnicastFibEntry row .1.3.6.1.4.1.2272.1.63.12.1

An entry of rcIsisPlsbIpUnicastFib Table. A Entry in
table exists for each PLSB IP unicast forwarding entry.

Indexes

rcIsisPlsbIpUnicastFibVrfId rcIsisPlsbIpUnicastFibDestinationIpAddrType rcIsisPlsbIpUnicastFibDestinationIpAddr rcIsisPlsbIpUnicastFibDestinationMask rcIsisPlsbIpUnicastFibNextHopBmac rcIsisPlsbIpUnicastFibVlan

Column	Syntax	OID
rcIsisPlsbIpUnicastFibVrfId VRF ID of the IP unicast FIB entry, 0 indicates NRE.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.12.1.1
rcIsisPlsbIpUnicastFibDestinationIpAddrType The address type of destination IP Address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.63.12.1.2
rcIsisPlsbIpUnicastFibDestinationIpAddr Destination IP Address of the IP unicast FIB entry. Support ipv4 size(4) and ipv6 size(16)	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.2272.1.63.12.1.3
rcIsisPlsbIpUnicastFibDestinationMask Destination IP mask of the IP unicast FIB entry	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2272.1.63.12.1.4
rcIsisPlsbIpUnicastFibNextHopBmac the nexthop BMAC of the IP unicast FIB entry	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.12.1.5
rcIsisPlsbIpUnicastFibVlan Vlan of the IP unicast FIB entry	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.12.1.6
rcIsisPlsbIpUnicastFibIsid ISID of the IP unicast FIB entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.12.1.7
rcIsisPlsbIpUnicastFibNextHopName the nexthop hostname of the IP unicast FIB entry	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.63.12.1.8
rcIsisPlsbIpUnicastFibOutgoingPort Outgoing port of the IP unicast Fib entry.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.63.12.1.9
rcIsisPlsbIpUnicastFibPrefixCost prefix cost of the IP unicast FIB entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.12.1.10
rcIsisPlsbIpUnicastFibSpbmCost bmac cost of the IP unicast FIB entry	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.12.1.11

Table of IS-IS PLSB Unicast FIB

rcIsisPlsbUcastFibEntry row .1.3.6.1.4.1.2272.1.63.13.1

An entry of rcIsisPlsbUcastFib Table. A Entry in
table exists for each PLSB unicast forwarding entry
generated by ISIS SPF computation

Indexes

rcIsisPlsbUcastFibSysId rcIsisPlsbUcastFibVlan rcIsisPlsbUcastFibDestinationMacAddr

Column	Syntax	OID
rcIsisPlsbUcastFibSysId System ID of the node where unicast FIB entry come from	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.63.13.1.1
rcIsisPlsbUcastFibVlan Vlan of the unicast FIB entry	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.13.1.2
rcIsisPlsbUcastFibDestinationMacAddr Destination Mac Address of the unicast FIB entry	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.13.1.3
rcIsisPlsbUcastFibOutgoingPort Outgoing port of the unicast Fib entry.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.63.13.1.4
rcIsisPlsbUcastFibHostName Host name of the node where unicast FIB entry come from	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.63.13.1.5
rcIsisPlsbUcastFibCost unicast FIB cost	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.13.1.6

Table of IS-IS PLSB Multicast FIB

rcIsisPlsbMcastFibEntry row .1.3.6.1.4.1.2272.1.63.14.1

An entry of rcIsisPlsbMcastFib Table. A Entry in
table exists for each PLSB Multicast forwarding entry
generated by ISIS SPF computation

Indexes

rcIsisPlsbMcastFibSysId rcIsisPlsbMcastFibVlan rcIsisPlsbMcastFibMcastDestMacAddr

Column	Syntax	OID
rcIsisPlsbMcastFibSysId System ID of the node where multicast FIB entry come from	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.63.14.1.1
rcIsisPlsbMcastFibVlan Vlan of the multicast FIB entry	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.14.1.2
rcIsisPlsbMcastFibMcastDestMacAddr Multicast destination Mac Address of the multicast FIB entry	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.14.1.3
rcIsisPlsbMcastFibIsid Isid id of the multicast FIB entry	Integer32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.63.14.1.4
rcIsisPlsbMcastFibNickName nick name of node where this i-sid got configured or discovered	Integer32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.63.14.1.5
rcIsisPlsbMcastFibType PLSB i-sid type	Enumeration Enumerated Values: 1 config 2 discover	.1.3.6.1.4.1.2272.1.63.14.1.6
rcIsisPlsbMcastFibOutgoingPortsobsolete Nni port of the multicast Fib entry. This attribute is obsoleted. New attributes rcIsisPlsbMcastFibOutgoingInterfacePorts and rcIsisPlsbMcastFibOutgoingInterfaceMlts are added for outgoing interfaces	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.63.14.1.7
rcIsisPlsbMcastFibHostName Host name of the node where multicast FIB entry come from	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.63.14.1.8
rcIsisPlsbMcastFibOutgoingInterfacePorts port Outgoing interface of multicast fib entry. Each bit corresponds to a port, as represented by its ifIndex value . When a bit has the value one(1), the corresponding port is a member of the set. When a bit has the …	RAPID-CITYPortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.63.14.1.9
rcIsisPlsbMcastFibOutgoingInterfaceMlts mlt outgoing interface of multicast fib entry. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit set represent MltId 2, and so on so forth, Up to bit 511 whic…	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.63.14.1.10
rcIsisPlsbMcastFibIncomingInterface Incoming interface (port or mlt) of the multicast Fib entry.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.63.14.1.11
rcIsisPlsbMcastFibIsidName The administratively-assigned name for this FIB I-SID.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.63.14.1.12

Table of IS-IS PLSB Node

rcIsisPlsbNodeEntry row .1.3.6.1.4.1.2272.1.63.15.1

An entry of rcIsisPlsbNode Table. A Entry in
table exists for each node running PLSB ISIS
in the setup.

Indexes

rcIsisPlsbNodeSysId

Column	Syntax	OID
rcIsisPlsbNodeSysId System ID of the PLSB node entry	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.63.15.1.1
rcIsisPlsbNodePrimaryParentSysId System ID of parent node of the PLSB node entry for primary bvlan	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.63.15.1.2
rcIsisPlsbNodePrimaryBvlan spbm primary b-vlan	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.15.1.3
rcIsisPlsbNodeSecondaryParentSysId System ID of parent node of the PLSB node entry for secondary bvlan	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.63.15.1.4
rcIsisPlsbNodeSecondaryBvlan spbm secondary b-vlan	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.15.1.5

Table of IS-IS SPBM port drop-stats by
port index and SPBM b-vlan

rcIsisSpbmPortDropStatsEntry row .1.3.6.1.4.1.2272.1.63.16.1

SPBM port based frame drop counters.

Indexes

rcIsisSpbmPortDropStatsPortIndex rcIsisSpbmPortDropStatsVlanId

Column	Syntax	OID
rcIsisSpbmPortDropStatsPortIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.63.16.1.1
rcIsisSpbmPortDropStatsVlanId A value that uniquely identifies the SPBM Virtual LAN associated with this entry.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.16.1.2
rcIsisSpbmPortDropStatsVlanType Indicates the type of SPBM bvlan	Enumeration Enumerated Values: 1 primary 2 secondary	.1.3.6.1.4.1.2272.1.63.16.1.3
rcIsisSpbmPortDropStatsUnknownUcastSrcAddr The total number of SPBM unknown unicast SA packets dropped on SPBM bvlan.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.16.1.4
rcIsisSpbmPortDropStatsRpfcUcastSrcAddr The total number of SPBM reverse path forwarding check (RPFC) unicast SA packets dropped on SPBM bvlan.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.16.1.5
rcIsisSpbmPortDropStatsUnknownUcastDestAddr The total number of SPBM unknown unicast DA packets dropped on SPBM bvlan.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.16.1.6
rcIsisSpbmPortDropStatsUnknownMcastDestAddr The total number of SPBM unknown multicast DA packets dropped on SPBM bvlan.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.16.1.7
rcIsisSpbmPortDropStatsRpfcMcastSrcAddr The total number of SPBM reverse path forwarding check (RPFC) multicast SA packets dropped on SPBM bvlan.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.16.1.8
rcIsisSpbmPortDropStatsLastDropMac The DA or SA last dropped on SPBM bvlan.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.16.1.9
rcIsisSpbmPortDropStatsIsMacDestAddr The last dropped mac on SPBM bvlan is DA or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.63.16.1.10
rcIsisSpbmPortDropStatsLastDropMacHostName The host name of the nodes where last dropped SA or DA on SPBM bvlan belongs	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.63.16.1.11

Table of IS-IS SPBM SA drop-stats by
Source Address and SPBM b-vlan

rcIsisSpbmSrcAddrDropStatsEntry row .1.3.6.1.4.1.2272.1.63.17.1

SPBM Source Address based frame drop counters.

Indexes

rcIsisSpbmSrcAddrDropStatsAddr rcIsisSpbmSrcAddrDropStatsVlanId

Column	Syntax	OID
rcIsisSpbmSrcAddrDropStatsAddr The source MAC of the drop packet.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.17.1.1
rcIsisSpbmSrcAddrDropStatsVlanId A value that uniquely identifies the SPBM Virtual LAN associated with this entry.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.17.1.2
rcIsisSpbmSrcAddrDropStatsVlanType Indicates the type of SPBM bvlan	Enumeration Enumerated Values: 1 primary 2 secondary	.1.3.6.1.4.1.2272.1.63.17.1.3
rcIsisSpbmSrcAddrDropStatsRpfcUcastSrcAddr The total number of SPBM reverse path forwarding check (RPFC) unicast SA packets dropped on SPBM bvlan.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.17.1.4
rcIsisSpbmSrcAddrDropStatsUnknownUcastDestAddr The total number of SPBM unknown unicast DA packets dropped on SPBM bvlan	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.17.1.5
rcIsisSpbmSrcAddrDropStatsRpfcMcastSrcAddr The total number of SPBM reverse path forwarding check (RPFC) multicast SA packets dropped on SPBM bvlan	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.17.1.6
rcIsisSpbmSrcAddrDropStatsUnknownMcastDestAddr The total number of SPBM unknown multicast DA packets dropped on SPBM bvlan	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.17.1.7
rcIsisSpbmSrcAddrDropStatsUnknownUcastSrcAddr The total number of SPBM unknown unicast SA packets dropped on SPBM bvlan	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.17.1.8
rcIsisSpbmSrcAddrDropStatsHostName The host name of the nodes where last on SPBM bvlan belongs	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.63.17.1.9

Table containing information about
defined I-SIDs and their current
use on the platform from an SPBM
perspective.

rcIsisSpbmUniEntry row .1.3.6.1.4.1.2272.1.63.18.1

An rcIsisSpbmUniTable entry. An
entry exists for each I-SID that
is currently defined. Entry instance
data indicates current I-SID usage
from a UNI perspective as follows:

Port VLAN ID UNI T…

Indexes

rcIsisSpbmUniIsid rcIsisSpbmUniPort rcIsisSpbmUniVlan

Column	Syntax	OID
rcIsisSpbmUniIsid The I-SID key for this entry.	Integer32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.63.18.1.1
rcIsisSpbmUniPort A port that is associated with the I-SID key for this entry. A value equal to 0 indicates that a port is not associated with the entry I-SID key. Depending in the value of rcIsisSpbmUniVlan, the entry can…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2272.1.63.18.1.2
rcIsisSpbmUniVlan A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. A value equal to 4095 indicates that a VLAN is not ass…	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.2272.1.63.18.1.3
rcIsisSpbmUniRowStatus This is used to control creation/deletion of entries in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.63.18.1.4
rcIsisSpbmUniStorage This object retrieves the storage type for this entry.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2272.1.63.18.1.5

SPBM IP Multicast Route Table
This table has been replaced by the 
rcIsisSpbmIpIsidMcastRouteTable to address the
INDEX is not in increasing order

rcIsisSpbmIpMcastRouteEntry row .1.3.6.1.4.1.2272.1.63.19.1

SPBM IP Multicast Route Entry

Indexes

rcIsisSpbmIpMcastGroup rcIsisSpbmIpMcastSource rcIsisSpbmIpMcastVsnIsid rcIsisSpbmIpMcastNickName

Column	Syntax	OID
rcIsisSpbmIpMcastGroup The IP multicast group address for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.19.1.1
rcIsisSpbmIpMcastSource The IP address of the multicast source for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.19.1.2
rcIsisSpbmIpMcastVsnIsid Virtual Services Network ISID	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.19.1.3
rcIsisSpbmIpMcastNickName Multicast nick name	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.19.1.4
rcIsisSpbmIpMcastSourceBeb Source Backbone Edge Bridge name	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.63.19.1.5
rcIsisSpbmIpMcastVlanId VLAN ID of the interface	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.19.1.6
rcIsisSpbmIpMcastVrfName VRF name of the interface	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.63.19.1.7
rcIsisSpbmIpMcastDataIsid Data ISID	Integer32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.63.19.1.8
rcIsisSpbmIpMcastNniPortsobsolete List of NNI ports. This attribute is obsoleted. New attributes rcIsisSpbmIpMcastNniInterfacePorts and rcIsisSpbmIpMcastNniInterfaceMlts are added for nni interfaces	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.63.19.1.9
rcIsisSpbmIpMcastType Indicates the type of the interface	Enumeration Enumerated Values: 1 routed 2 snoop	.1.3.6.1.4.1.2272.1.63.19.1.10
rcIsisSpbmIpMcastBvlan Backbone VLAN on which SPB traffic is carried	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.19.1.11
rcIsisSpbmIpMcastNniInterfacePorts list of port nni interface. Each bit corresponds to a port, as represented by its ifIndex value. When a bit has the value one(1), the corresponding port is a member of the set. When a bit has the value zero(0), the c…	RAPID-CITYPortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.63.19.1.12
rcIsisSpbmIpMcastNniInterfaceMlts list of mlt nni interface. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit set represent MltId 2, and so on so forth, Up to bit 511 which represents Mlt Id 51…	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.63.19.1.13

SPBM IP Multicast Route UNI Receivers Table.
This table has been replaced by the
rcIsisSpbmIpIsidMcastRouteUniRcvrsTable to address
the INDEX is not in increasing order

rcIsisSpbmIpMcastRouteUniRcvrsEntry row .1.3.6.1.4.1.2272.1.63.20.1

SPBM IP Multicast Route UNI Receivers Entry

Indexes

rcIsisSpbmIpMcastUniRcvrsGroup rcIsisSpbmIpMcastUniRcvrsSource rcIsisSpbmIpMcastUniRcvrsVsnIsid rcIsisSpbmIpMcastUniRcvrsNickName rcIsisSpbmIpMcastUniRcvrsEgressVlan

Column	Syntax	OID
rcIsisSpbmIpMcastUniRcvrsGroup The IP multicast group address for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.20.1.1
rcIsisSpbmIpMcastUniRcvrsSource The IP address of the multicast source for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.20.1.2
rcIsisSpbmIpMcastUniRcvrsVsnIsid Virtual Services Network ISID	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.20.1.3
rcIsisSpbmIpMcastUniRcvrsNickName Multicast nick name	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.20.1.4
rcIsisSpbmIpMcastUniRcvrsEgressVlan The Vlan associated with this egress entry.	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.63.20.1.5
rcIsisSpbmIpMcastUniRcvrsEgressActivePorts The set of ports in the vlan that have UNI receivers for this multicast route.	RAPID-CITYPortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.63.20.1.6

Table of IS-IS PLSB IP Inter Isid Unicast FIB.
This table will replace rcIsisPlsbIpUnicastFibTable

rcIsisPlsbIpInterIsidUnicastFibEntry row .1.3.6.1.4.1.2272.1.63.21.1

An entry of rcIsisPlsbIpInterIsidUnicastFib Table.
An Entry table exists for each PLSB IP unicast
forwarding entry.

Indexes

rcIsisPlsbIpInterIsidUnicastFibVrfId rcIsisPlsbIpInterIsidUnicastFibDestinationIpAddrType rcIsisPlsbIpInterIsidUnicastFibDestinationIpAddr rcIsisPlsbIpInterIsidUnicastFibDestinationMask rcIsisPlsbIpInterIsidUnicastFibNextHopBmac rcIsisPlsbIpInterIsidUnicastFibDestIsid rcIsisPlsbIpInterIsidUnicastFibVlan

Column	Syntax	OID
rcIsisPlsbIpInterIsidUnicastFibVrfId VRF ID of the IP unicast FIB entry, 0 indicates NRE.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.21.1.1
rcIsisPlsbIpInterIsidUnicastFibDestinationIpAddrType The address type of destination IP Address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.63.21.1.2
rcIsisPlsbIpInterIsidUnicastFibDestinationIpAddr Destination IP Address of the IP unicast FIB entry. Support ipv4 size(4) and ipv6 size(16)	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.2272.1.63.21.1.3
rcIsisPlsbIpInterIsidUnicastFibDestinationMask Destination IP mask of the IP unicast FIB entry	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2272.1.63.21.1.4
rcIsisPlsbIpInterIsidUnicastFibNextHopBmac The nexthop BMAC of the IP unicast FIB entry	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.21.1.5
rcIsisPlsbIpInterIsidUnicastFibDestIsid Destination ISID of the IP unicast FIB entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.21.1.6
rcIsisPlsbIpInterIsidUnicastFibVlan Vlan of the IP unicast FIB entry. The value of 0 is associated with a local Inter VSN circuitless IP interface fib entry.	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.63.21.1.7
rcIsisPlsbIpInterIsidUnicastFibIsid ISID of the IP unicast FIB entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.21.1.8
rcIsisPlsbIpInterIsidUnicastFibNextHopName The nexthop hostname of the IP unicast FIB entry	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.63.21.1.9
rcIsisPlsbIpInterIsidUnicastFibOutgoingPort Outgoing port of the IP unicast Fib entry. The value of 0 is associated with the local interfaces.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.63.21.1.10
rcIsisPlsbIpInterIsidUnicastFibPrefixCost prefix cost of the IP unicast FIB entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.21.1.11
rcIsisPlsbIpInterIsidUnicastFibSpbmCost Bmac cost of the IP unicast FIB entry	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.21.1.12
rcIsisPlsbIpInterIsidUnicastFibPreference IP Route preference of the IP unicast FIB entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.21.1.13
rcIsisPlsbIpInterIsidUnicastFibMetricType IP Metric Type of the IP unicast FIB entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.21.1.14

Table of IS-IS PLSB IPV6 Unicast FIB

rcIsisPlsbIpv6UnicastFibEntry row .1.3.6.1.4.1.2272.1.63.23.1

An entry of rcIsisPlsbIpv6UnicastFib Table. A Entry in
table exists for each PLSB IPV6 unicast forwarding entry.

Indexes

rcIsisPlsbIpv6UnicastFibVrfId rcIsisPlsbIpv6UnicastFibDestinationIpAddrType rcIsisPlsbIpv6UnicastFibDestinationIpAddr rcIsisPlsbIpv6UnicastFibDestinationMask rcIsisPlsbIpv6UnicastFibNextHopBmac rcIsisPlsbIpv6UnicastFibDestIsid rcIsisPlsbIpv6UnicastFibVlan

Column	Syntax	OID
rcIsisPlsbIpv6UnicastFibVrfId VRF ID of the IPV6 unicast FIB entry, 0 indicates NRE.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.23.1.1
rcIsisPlsbIpv6UnicastFibDestinationIpAddrType The address type of destination IPV6 Address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.63.23.1.2
rcIsisPlsbIpv6UnicastFibDestinationIpAddr Destination IP Address of the IPV6 unicast FIB entry.	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.2272.1.63.23.1.3
rcIsisPlsbIpv6UnicastFibDestinationMask Destination IP mask of the IPV6 unicast FIB entry	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.2272.1.63.23.1.4
rcIsisPlsbIpv6UnicastFibNextHopBmac the nexthop BMAC of the IPV6 unicast FIB entry	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.23.1.5
rcIsisPlsbIpv6UnicastFibDestIsid Destination ISID of the IP unicast FIB entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.23.1.6
rcIsisPlsbIpv6UnicastFibVlan Vlan of the IPV6 unicast FIB entry	Integer32 Constraints: range: 1-4084	.1.3.6.1.4.1.2272.1.63.23.1.7
rcIsisPlsbIpv6UnicastFibIsid ISID of the IPV6 unicast FIB entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.23.1.8
rcIsisPlsbIpv6UnicastFibNextHopName the nexthop hostname of the IPV6 unicast FIB entry	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.63.23.1.9
rcIsisPlsbIpv6UnicastFibOutgoingPort Outgoing port of the IPV6 unicast Fib entry. The value of 0 is associated with local interfaces	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.63.23.1.10
rcIsisPlsbIpv6UnicastFibPrefixCost prefix cost of the IPV6 unicast FIB entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.23.1.11
rcIsisPlsbIpv6UnicastFibSpbmCost bmac cost of the IPV6 unicast FIB entry	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.63.23.1.12
rcIsisPlsbIpv6UnicastFibMetricType IP Metric Type of the IP unicast FIB entry	Enumeration Enumerated Values: 1 internal 2 external	.1.3.6.1.4.1.2272.1.63.23.1.13
rcIsisPlsbIpv6UnicastFibPreference Ipv6 Route preference of the IPv6 unicast FIB entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.23.1.14

SPBM IP Isid Multicast Route Table

rcIsisSpbmIpIsidMcastRouteEntry row .1.3.6.1.4.1.2272.1.63.24.1

SPBM IP Isid Multicast Route Entry

Indexes

rcIsisSpbmIpIsidMcastVsnIsid rcIsisSpbmIpIsidMcastGroup rcIsisSpbmIpIsidMcastSource rcIsisSpbmIpIsidMcastNickName

Column	Syntax	OID
rcIsisSpbmIpIsidMcastVsnIsid Virtual Services Network ISID	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.24.1.1
rcIsisSpbmIpIsidMcastGroup The IP multicast group address for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.24.1.2
rcIsisSpbmIpIsidMcastSource The IP address of the multicast source for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.24.1.3
rcIsisSpbmIpIsidMcastNickName Multicast nick name	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.24.1.4
rcIsisSpbmIpIsidMcastSourceBeb Source Backbone Edge Bridge name	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.63.24.1.5
rcIsisSpbmIpIsidMcastVlanId VLAN ID of the interface	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.24.1.6
rcIsisSpbmIpIsidMcastVrfName VRF name of the interface	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.63.24.1.7
rcIsisSpbmIpIsidMcastDataIsid Data ISID	Integer32 Constraints: range: 1-16777215	.1.3.6.1.4.1.2272.1.63.24.1.8
rcIsisSpbmIpIsidMcastType Indicates the type of the interface	Enumeration Enumerated Values: 1 routed 2 snoop	.1.3.6.1.4.1.2272.1.63.24.1.9
rcIsisSpbmIpIsidMcastBvlan Backbone VLAN on which SPB traffic is carried	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.63.24.1.10
rcIsisSpbmIpIsidMcastNniInterfacePorts list of port nni interface. Each bit corresponds to a port, as represented by its ifIndex value. When a bit has the value one(1), the corresponding port is a member of the set. When a bit has the value zero(0), the …	RAPID-CITYPortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.63.24.1.11
rcIsisSpbmIpIsidMcastNniInterfaceMlts list of mlt nni interface. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit set represent MltId 2, and so on so forth, Up to bit 511 which represents Mlt Id …	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.63.24.1.12

SPBM IP Isid Multicast Route UNI Receivers Table

rcIsisSpbmIpIsidMcastRouteUniRcvrsEntry row .1.3.6.1.4.1.2272.1.63.25.1

SPBM IP Isid Multicast Route UNI Receivers Entry

Indexes

rcIsisSpbmIpIsidMcastUniRcvrsVsnIsid rcIsisSpbmIpIsidMcastUniRcvrsGroup rcIsisSpbmIpIsidMcastUniRcvrsSource rcIsisSpbmIpIsidMcastUniRcvrsNickName rcIsisSpbmIpIsidMcastUniRcvrsEgressVlan

Column	Syntax	OID
rcIsisSpbmIpIsidMcastUniRcvrsVsnIsid Virtual Services Network ISID	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.25.1.1
rcIsisSpbmIpIsidMcastUniRcvrsGroup The IP multicast group address for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.25.1.2
rcIsisSpbmIpIsidMcastUniRcvrsSource The IP address of the multicast source for which this entry contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.25.1.3
rcIsisSpbmIpIsidMcastUniRcvrsNickName Multicast nick name	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.25.1.4
rcIsisSpbmIpIsidMcastUniRcvrsEgressVlan The Vlan associated with this egress entry.	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.63.25.1.5
rcIsisSpbmIpIsidMcastUniRcvrsEgressActivePorts The set of ports in the vlan that have UNI receivers for this multicast route.	RAPID-CITYPortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.63.25.1.6

The table of ISIS logical interface.

rcIsisLogicalInterfaceEntry row .1.3.6.1.4.1.2272.1.63.26.1

Entry contains the configuration information about the logical isis interface

Indexes

rcIsisLogicalInterfaceId

Column	Syntax	OID
rcIsisLogicalInterfaceId An index used to uniquely identify this logical interface.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.63.26.1.1
rcIsisLogicalInterfaceIfIndex The ISIS logical ifIndex	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.63.26.1.2
rcIsisLogicalInterfaceType Indicates the entry is for Layer2 or Layer3	Enumerationr/w Enumerated Values: 1 layer2 2 ip	.1.3.6.1.4.1.2272.1.63.26.1.3
rcIsisLogicalInterfaceDestIPAddr The logical interface Destination IP address	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.26.1.4
rcIsisLogicalInterfaceDestIfIndex The value of ifIndex for the interface to which this logical interface corresponds. It can be port/mlt ifindex.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.63.26.1.5
rcIsisLogicalInterfaceVids This bitfield is used to identify which VLANs this logical interface is associated with. Each VLAN ID is stored as a bit. The most-significant (left-most) bit represents Vlan Id 1.	OctetStringr/w Constraints: range: 512-512	.1.3.6.1.4.1.2272.1.63.26.1.6
rcIsisLogicalInterfacePrimaryVid Primary tunnel vlan associated with L2Core ISIS logical interface	Integer32r/w Constraints: range: 2-4059	.1.3.6.1.4.1.2272.1.63.26.1.7
rcIsisLogicalInterfaceName An administratively-assigned name for this Logical interface.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.2272.1.63.26.1.8
rcIsisLogicalInterfaceRowStatus Used to create/delete logical interface	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.63.26.1.9
rcIsisLogicalInterfaceCircIndex An index used to indentify ISIS circuit created under the logical interface	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.2272.1.63.26.1.10
rcIsisLogicalInterfaceNextHopIfIndex Next hop destination ifindex to reach the logical tunnel dest-ip	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.63.26.1.11
rcIsisLogicalInterfaceNextHopVid Next hop vlan id to reach logical tunnel dest-ip It is deprecated by rcIsisLogicalInterfaceNextHopDestIfIndex	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.26.1.12
rcIsisLogicalInterfaceNextHopVrf Next hop vrf name to reach logical tunnel dest-ip It is deprecated by rcIsisLogicalInterfaceNextHopDestVid	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.63.26.1.13
rcIsisLogicalInterfaceIpsecEnable Indicate if IPSec is enabled on logical interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.63.26.1.14
rcIsisLogicalInterfaceAuthenticationKey Authentication key for IPSec on logical interface	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.63.26.1.15
rcIsisLogicalInterfaceShapingRate Egress shaping rate value on ISIS logical interface	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.63.26.1.16
rcIsisLogicalInterfaceMtu The value specifies MTU of logical interface tunnel	Integer32r/w Constraints: range: 750-9000	.1.3.6.1.4.1.2272.1.63.26.1.17
rcIsisLogicalInterfaceEncryptionKeyLength The length of key used for encryption in IPSec Tunnel	Enumerationr/w Enumerated Values: 1 len128bit 2 len256bit	.1.3.6.1.4.1.2272.1.63.26.1.18
rcIsisLogicalInterfaceIpsecTunnelDestAddress The IPSec Destination IP address	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.26.1.19
rcIsisLogicalInterfaceBfdEnable Used to enable/disable BFD on ISIS logical interface.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.63.26.1.20
rcIsisLogicalInterfaceIpsecResponderOnly Indicates if IPSec session of this logical interface should be in responder only mode. When this config is made true it will not initiate the IPSec connection but only respond to the incoming connection. By default both…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.63.26.1.21
rcIsisLogicalInterfaceIpsecRemoteNatIPAddr IPSec remote NAT IP address. This needs to be configured in IPSec initiator logical interface when there is NAT on both side the of IPSec tunnel	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.26.1.22
rcIsisLogicalInterfaceIpsecAuthMethod Method of authentication to use when validating the identity of remote IPSEC peer. - preSharedKey - pre shared keys - rsaSignedDigitalCert - RSA signed digital certificates	Enumerationr/w Enumerated Values: 1 preSharedKey 2 rsaSignedDigitalCert	.1.3.6.1.4.1.2272.1.63.26.1.23
rcIsisLogicalInterfaceIpsecCompression Indicate if IPSec compression is enabled on logical interface. This object is applicable only for ExtremeAccess platforms XA1440 and XA1480.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.63.26.1.24

IS-IS SPBM Multicast FIB Uni Table

rcIsisSpbmMcastFibUniEntry row .1.3.6.1.4.1.2272.1.63.27.1

IS-IS SPBM Multicast FIB Uni Entry

Indexes

rcIsisSpbmMcastFibUniSysId rcIsisSpbmMcastFibUniVlan rcIsisSpbmMcastFibUniMcastDestMacAddr rcIsisSpbmMcastFibUniCvid

Column	Syntax	OID
rcIsisSpbmMcastFibUniSysId System ID of the node where multicast FIB entry come from.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.63.27.1.1
rcIsisSpbmMcastFibUniVlan bVlan of the multicast FIB entry.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.63.27.1.2
rcIsisSpbmMcastFibUniMcastDestMacAddr Multicast destination Mac Address of the multicast FIB entry.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.63.27.1.3
rcIsisSpbmMcastFibUniCvid Customer vid of the multicast FIB entry. 4095 is not used. 4096 is reserved for untagged case.	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.63.27.1.4
rcIsisSpbmMcastFibUniOutgoingInterfaceNniPorts nni port Outgoing interface of multicast fib entry. Each bit corresponds to a port, as represented by its ifIndex value . When a bit has the value one(1), the corresponding port is a member of the set. When a bit has …	RAPID-CITYPortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.63.27.1.5
rcIsisSpbmMcastFibUniOutgoingInterfaceNniMlts nni mlt outgoing interface of multicast fib entry. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit set represent MltId 2, and so on so forth, Up to bit 511 …	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.63.27.1.6
rcIsisSpbmMcastFibUniOutgoingInterfaceSwUniPorts switched uni port Outgoing interface of multicast fib entry. Each bit corresponds to a port, as represented by its ifIndex value . When a bit has the value one(1), the corresponding port is a member of the set. When a…	RAPID-CITYPortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.63.27.1.7
rcIsisSpbmMcastFibUniOutgoingInterfaceSwUniMlts switched uni mlt outgoing interface of multicast fib entry. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit set represent MltId 2, and so on so forth, Up to…	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.63.27.1.8
rcIsisSpbmMcastFibUniOutgoingInterfaceCvlanUniPorts platform cvlan uni port Outgoing interface of multicast fib entry. Each bit corresponds to a port, as represented by its ifIndex value . When a bit has the value one(1), the corresponding port is a member of the set. …	RAPID-CITYPortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.63.27.1.9
rcIsisSpbmMcastFibUniOutgoingInterfaceCvlanUniMlts platform cvlan uni mlt outgoing interface of multicast fib entry. A set of bits represents the MLT IDs.From left to right, the first bit set represent MltId 1. The second bit set represent MltId 2, and so on so forth…	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.63.27.1.10
rcIsisSpbmMcastFibUniCvlan platform customer vlan of the multicast FIB entry.	Integer32 Constraints: range: 0-4084	.1.3.6.1.4.1.2272.1.63.27.1.11

The table to store nexthop information for 
the logical-interface tunnel

rcIsisLogicalInterfaceNextHopEntry row .1.3.6.1.4.1.2272.1.63.28.1

Entry contains the nexthop information for
the logical interface tunnel

Indexes

rcIsisLogicalInterfaceNextHopId rcIsisLogicalInterfaceNextHopIp

Column	Syntax	OID
rcIsisLogicalInterfaceNextHopId An index used to uniquely identify the logical interface tunnel.This value is same as the rcIsisLogicalInterfaceId in the rcIsisLogicalInterfaceTable	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.63.28.1.1
rcIsisLogicalInterfaceNextHopIp An index that uniquely identifies the next hop IP address of the logical interface tunnel	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.63.28.1.2
rcIsisLogicalInterfaceNextHopDestIfIndex Next hop destination ifindex to reach the next hop ip of logical interface tunnel	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.63.28.1.3
rcIsisLogicalInterfaceNextHopDestVid Next hop destination vlan id to reach the next hop ip of logical interface tunnel	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.63.28.1.4

Table for inter-area L2 I-SID redistribution.

rcIsisMultiAreaL2RedistributeIsidEntry row .1.3.6.1.4.1.2272.1.63.29.2.2.1

Contains information regarding inter-area
L2 I-SID redistribution policy.

Indexes

rcIsisMultiAreaL2RedistributeIsidType

Column	Syntax	OID
rcIsisMultiAreaL2RedistributeIsidType L2 isid redistribute type. Configurable values: l2isid(1) - L2 isid	Enumeration Enumerated Values: 1 l2isid	.1.3.6.1.4.1.2272.1.63.29.2.2.1.1
rcIsisMultiAreaL2RedistributeIsidPermit Used to set inter-area L2 I-SID redistribution policy to permit or deny.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.63.29.2.2.1.2
rcIsisMultiAreaL2RedistributeIsidExceptListName Used to configure inter-area L2 I-SID redistribution exception isid-list name. Isid values contained by this list will not be subject to the permit/deny rule.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.63.29.2.2.1.3
rcIsisMultiAreaL2RedistributeIsidRowStatus Used to create/remove entries from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.63.29.2.2.1.4

Table for L2 multicast redistribution
per scope I-SID.

rcIsisMultiAreaL2RedistributeMcastIsidEntry row .1.3.6.1.4.1.2272.1.63.29.2.3.1

Contains information regarding L2
multicast redistribution per scope I-SID.

Indexes

rcIsisMultiAreaL2RedistributeMcastIsid

Column	Syntax	OID
rcIsisMultiAreaL2RedistributeMcastIsid L2 multicast redistribute scope I-SID.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.29.2.3.1.1
rcIsisMultiAreaL2RedistributeMcastIsidEnable Used to enable L2 multicast redistribute per scope I-SID.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.63.29.2.3.1.2
rcIsisMultiAreaL2RedistributeMcastIsidPolicyName Used to configure L2 multicast redistribute per scope I-SID policy name.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.63.29.2.3.1.3
rcIsisMultiAreaL2RedistributeMcastIsidRowStatus Used to create/remove entries from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.63.29.2.3.1.4

Table for L2 multicast redistribution
per scope I-SID list.

rcIsisMultiAreaL2RedistributeMcastIsidListEntry row .1.3.6.1.4.1.2272.1.63.29.2.4.1

Contains information regarding L2 multicast
redistribution per scope I-SID list.

Indexes

rcIsisMultiAreaL2RedistributeMcastIsidList

Column	Syntax	OID
rcIsisMultiAreaL2RedistributeMcastIsidList L2 multicast redistribute scope I-SID list.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.63.29.2.4.1.1
rcIsisMultiAreaL2RedistributeMcastIsidListEnable Used to enable L2 multicast L2 multicast redistribution per scope I-SID list.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.63.29.2.4.1.2
rcIsisMultiAreaL2RedistributeMcastIsidListPolicyName Used to configure L2 multicast redistribution per scope I-SID list policy name.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.63.29.2.4.1.3
rcIsisMultiAreaL2RedistributeMcastIsidListRowStatus Used to create/remove entries from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.63.29.2.4.1.4

Table for L3 redistribute.

rcIsisMultiAreaL3RedistributeEntry row .1.3.6.1.4.1.2272.1.63.29.2.5.1

Contains information regarding L3
redistribute.

Indexes

rcIsisMultiAreaL3RedistributeVrfId rcIsisMultiAreaL3RedistributeType

Column	Syntax	OID
rcIsisMultiAreaL3RedistributeVrfId Indicates the Virtual Router to which the L3 redistribute entry belongs.	RC-VRF-MIBVrfIdentifier Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.63.29.2.5.1.1
rcIsisMultiAreaL3RedistributeType L3 redistribute type. Configurable values are: ip-ucast(1) - IPv4 unicast ip-mcast(2) - IPv4 multicast ipv6-ucast(3) - IPv6 unicast	Enumeration Enumerated Values: 1 ip-ucast 2 ip-mcast 3 ipv6-ucast	.1.3.6.1.4.1.2272.1.63.29.2.5.1.2
rcIsisMultiAreaL3RedistributeMetric Used to configure L3 redistribute metric. Applies only to ip-ucast and ipv6-ucast entries.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.63.29.2.5.1.3
rcIsisMultiAreaL3RedistributeMetricType Used to configure L3 redistribute metric type. Applies only to ip-ucast and ipv6-ucast entries.	Enumerationr/w Enumerated Values: 1 any 2 internal 3 external	.1.3.6.1.4.1.2272.1.63.29.2.5.1.4
rcIsisMultiAreaL3RedistributeRoutePolicy Used to associate a route policy to an L3 redistribute entry.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.63.29.2.5.1.5
rcIsisMultiAreaL3RedistributeEnable Enable L3 redistribute.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.63.29.2.5.1.6
rcIsisMultiAreaL3RedistributeApply Used to Apply IS-IS multi area L3 filters. When the value is set to apply, all the elements of the specified entry in rcIsisMultiAreaL3RedistributeTable will be applied. This may be a disruptive operation to traffic. Th…	Enumerationr/w Enumerated Values: 1 noAction 2 apply	.1.3.6.1.4.1.2272.1.63.29.2.5.1.7
rcIsisMultiAreaL3RedistributeRowStatus Used to create/remove entries from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.63.29.2.5.1.8

Table for L2 isid list.

rcIsisMultiAreaL2IsidListEntry row .1.3.6.1.4.1.2272.1.63.29.3.1

Contains information regarding L2
isid list.

Indexes

rcIsisMultiAreaL2IsidListName rcIsisMultiAreaL2IsidListRangeStart

Column	Syntax	OID
rcIsisMultiAreaL2IsidListName L2 isid list name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.63.29.3.1.1
rcIsisMultiAreaL2IsidListRangeStart Used to configure L2 isid list range start.	Integer32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.29.3.1.2
rcIsisMultiAreaL2IsidListRangeEnd Used to configure L2 isid list range end.	Integer32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.63.29.3.1.3
rcIsisMultiAreaL2IsidListRowStatus Used to create/remove entries from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.63.29.3.1.6