RC-IPV6-MIB Table View

Route Smlt Table

rcIpv6RsmltOperEntry row .1.3.6.1.4.1.2272.1.8.26.5.1

A local IPv6 RSMLT entry

Indexes

rcIpv6RsmltOperIfIndex rcIpv6RsmltOperIpv6Addr rcIpv6RsmltOperIpv6PrefixLength

Column	Syntax	OID
rcIpv6RsmltOperIfIndex Route Smlt Oper IfIndex.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.8.26.5.1.1
rcIpv6RsmltOperIpv6Addr IPv6 Interface with RSMLT on.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.8.26.5.1.2
rcIpv6RsmltOperIpv6PrefixLength IPv6 Prefix Length.	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.26.5.1.3
rcIpv6RsmltOperAdminStatus is a enable/disable flag.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.5.1.4
rcIpv6RsmltOperHoldDownTimer Timer value, the range of value is from 0 to 3600.	Integer32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.2272.1.8.26.5.1.5
rcIpv6RsmltOperHoldDownTimeRemaining The time value that indicate how much time remaining of HoldDownTimer.	Integer32 Constraints: range: 0-3600	.1.3.6.1.4.1.2272.1.8.26.5.1.6
rcIpv6RsmltOperHoldUpTimer The range of value 0 to 3600 or 9999. 9999 means infinity.	Integer32r/w Constraints: range: 0-3600 range: 9999-9999	.1.3.6.1.4.1.2272.1.8.26.5.1.7
rcIpv6RsmltOperHoldUpTimeRemaining The time value that indicate how much time remaining of HoldUpTimer.	Integer32 Constraints: range: 0-3600 range: 9999-9999	.1.3.6.1.4.1.2272.1.8.26.5.1.8
rcIpv6RsmltOperOperStatus The operation status of Rsmlt, up or down.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.8.26.5.1.9
rcIpv6RsmltOperSmltId The id range for SMLT is 1-32.	RAPID-CITYIdList	.1.3.6.1.4.1.2272.1.8.26.5.1.10
rcIpv6RsmltOperSltId The id range for SLT is 1-512.	RAPID-CITYIdList	.1.3.6.1.4.1.2272.1.8.26.5.1.11
rcIpv6RsmltOperVlanId Vlan id.	Integer32 Constraints: range: 1-4093	.1.3.6.1.4.1.2272.1.8.26.5.1.12
rcIpv6RsmltOperMacAddr Mac Address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.26.5.1.13
rcIpv6RsmltOperVrfId Indicates the Virtual Router to which the RSMLT Oper instance belongs.	RC-VRF-MIBVrfIdentifier Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.26.5.1.14
rcIpv6RsmltOperVrfName Name of the Virtual Router to which the RSMLT Oper instance belongs.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.26.5.1.15

Route Smlt Peer Table

rcIpv6RsmltPeerEntry row .1.3.6.1.4.1.2272.1.8.26.6.1

An entry of Ip As Path Access List Table.

Indexes

rcIpv6RsmltPeerIfIndex rcIpv6RsmltPeerIpv6Addr rcIpv6RsmltPeerIpv6PrefixLength

Column	Syntax	OID
rcIpv6RsmltPeerIfIndex Route Smlt Oper IfIndex.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.8.26.6.1.1
rcIpv6RsmltPeerIpv6Addr IP Interface with RSMLT on.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.8.26.6.1.2
rcIpv6RsmltPeerIpv6PrefixLength IPv6 Prefix Length	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.26.6.1.3
rcIpv6RsmltPeerAdminStatus is a enable/disable flag.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.6.1.4
rcIpv6RsmltPeerHoldDownTimer Timer value, the range of value is from 0 to 3600.	Integer32 Constraints: range: 0-3600	.1.3.6.1.4.1.2272.1.8.26.6.1.5
rcIpv6RsmltPeerHoldDownTimeRemaining The time value that indicate how much time remaining of HoldDownTimer.	Integer32 Constraints: range: 0-3600	.1.3.6.1.4.1.2272.1.8.26.6.1.6
rcIpv6RsmltPeerHoldUpTimer The range of value 0 to 3600 or 9999. 9999 means infinity.	Integer32 Constraints: range: 0-3600 range: 9999-9999	.1.3.6.1.4.1.2272.1.8.26.6.1.7
rcIpv6RsmltPeerHoldUpTimeRemaining The time value that indicate how much time remaining of HoldUpTimer.	Integer32 Constraints: range: 0-3600 range: 9999-9999	.1.3.6.1.4.1.2272.1.8.26.6.1.8
rcIpv6RsmltPeerOperStatus The operation status of Rsmlt, up or down.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.8.26.6.1.9
rcIpv6RsmltPeerSmltId The id range for SMLT is 1-32.	RAPID-CITYIdList	.1.3.6.1.4.1.2272.1.8.26.6.1.10
rcIpv6RsmltPeerSltId The id range for SLT is 1-512.	RAPID-CITYIdList	.1.3.6.1.4.1.2272.1.8.26.6.1.11
rcIpv6RsmltPeerVlanId Vlan id.	Integer32 Constraints: range: 1-4093	.1.3.6.1.4.1.2272.1.8.26.6.1.12
rcIpv6RsmltPeerMacAddr Mac Address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.26.6.1.13
rcIpv6RsmltPeerVrfId Indicates the Virtual Router to which the RSMLT Peer instance belongs.	RC-VRF-MIBVrfIdentifier Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.26.6.1.14
rcIpv6RsmltPeerVrfName Name of the Virtual Router to which the RSMLT Peer instance belongs.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.26.6.1.15

RSMLT Edge Support Peer Info table. This 
table consists of the RSMLT Peers for which 
the switch will act as a PeerForwarder.

rcIpv6RsmltEdgePeerEntry row .1.3.6.1.4.1.2272.1.8.26.7.1

RSMLT Edge Support Peer Info Entry

Indexes

rcIpv6RsmltEdgePeerVlanId rcIpv6RsmltEdgePeerIpv6Address rcIpv6RsmltEdgePeerIpv6PrefixLength

Column	Syntax	OID
rcIpv6RsmltEdgePeerVlanId A value that uniquely identifies the Virtual LAN associated with this entry.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.8.26.7.1.1
rcIpv6RsmltEdgePeerIpv6Address IP address of the Peer RSMLT Interface.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.8.26.7.1.2
rcIpv6RsmltEdgePeerIpv6PrefixLength If set then this prefix can be used for address autoconfig, passed opaquely to Infinity	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.26.7.1.3
rcIpv6RsmltEdgePeerMacAddress The MAC address of the Peer RSMLT interface.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.26.7.1.4
rcIpv6RsmltEdgePeerVrfId Indicates the Virtual Router to which the RSMLT Edge Peer instance belongs.	RC-VRF-MIBVrfIdentifier Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.26.7.1.5
rcIpv6RsmltEdgePeerVrfName Name of the Virtual Router to which the RSMLT Edge Peer instance belongs.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.26.7.1.6
rcIpv6RsmltEdgePeerIsRaPrefix True if this is a Router Advertisement prefix, False if this is a global address.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.7.1.7
rcIpv6RsmltEdgePeerConfType Type of configured address, passed opaquely to Infinity	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.26.7.1.8
rcIpv6RsmltEdgePeerNoAdvertise True if advertisement of this prefix is disabled, passed opaquely to Infinity	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.7.1.9
rcIpv6RsmltEdgePeerOspf6Advertise True if OSPFv3 advertisement of this prefix is enabled, passed opaquely to Infinity	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.7.1.10
rcIpv6RsmltEdgePeerPrefCandidate True if address is considered for preferred selection, passed opaquely to Infinity	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.7.1.11
rcIpv6RsmltEdgePeerPfxValidLife Valid lifetime in seconds, passed opaquely to Infinity	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.26.7.1.12
rcIpv6RsmltEdgePeerPfxPrefLife Preferred lifetime in seconds, passed opaquely to Infinity	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.26.7.1.13
rcIpv6RsmltEdgePeerPfxOnLinkFlag If set then this prefix can be used for onlink determination, passed opaquely to Infinity	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.7.1.14
rcIpv6RsmltEdgePeerPfxAutoFlag If set then this prefix can be used for address autoconfig, passed opaquely to Infinity	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.7.1.15

This table contains list of IPv6 interfaces and
per-interface IPv6-specific information.

rcIpv6InterfaceEntry row .1.3.6.1.4.1.2272.1.62.1.1.2.1

An entry of ipv6 interface In Table containing
per-interface information.

Indexes

rcIpv6InterfaceIfIndex

Column	Syntax	OID
rcIpv6InterfaceIfIndex An unique value to identify a physical interface or a logical interface (VLAN). For the brouter port it is the ifindex of the port and in the case of the vlan it is the ifindex of the vlan.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.62.1.1.2.1.1
rcIpv6InterfaceIdentifier IPv6 address interface identifiers. This is a binary string of up to 8 octets in network byte-order.	IPV6-TCIpv6AddressIfIdentifierr/w Type Constraints: range: 0..8	.1.3.6.1.4.1.2272.1.62.1.1.2.1.2
rcIpv6InterfaceIdentifierLength The length of the Interface Identifier in bits.	bitsInteger32r/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.62.1.1.2.1.3
rcIpv6InterfaceDescr A textual string containing information about the interface. This string may be set by network management system.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.62.1.1.2.1.4
rcIpv6InterfaceVlanId A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.62.1.1.2.1.5
rcIpv6InterfaceType The interface type. Only ethernet and loopback values are configurable.	Enumerationr/w Enumerated Values: 1 ethernet 2 pointToPoint 3 pointToMultipoint 4 loopback	.1.3.6.1.4.1.2272.1.62.1.1.2.1.6
rcIpv6InterfaceReasmMaxSize MTU for this IPv6 interface, this value should be same for all the ip addresses defined on this interface.	Integer32r/w Constraints: range: 1280-9600	.1.3.6.1.4.1.2272.1.62.1.1.2.1.7
rcIpv6InterfacePhysAddress The media-dependent `physical' address, for the ethernet media it is the MAC address	RFC1213-MIBPhysAddress	.1.3.6.1.4.1.2272.1.62.1.1.2.1.8
rcIpv6InterfaceAdminStatus The indication of whether IPv6 is enabled (up) or disabled (down) on this interface. This object does not affect the state of the interface itself, only its connection to an IPv6 stack.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.9
rcIpv6InterfaceOperStatus Operating status of the interface.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.62.1.1.2.1.10
rcIpv6InterfaceReachableTime The time (in milliseconds) a neighbor is considered reachable after receiving a reachability confirmation. REFERENCE RFC2461, Section 6.3.2	Integer32r/w Constraints: range: 1-3600000	.1.3.6.1.4.1.2272.1.62.1.1.2.1.11
rcIpv6InterfaceRetransmitTimedeprecated The time (in milliseconds) between retransmissions of Neighbor Solicitation messages to a neighbor when resolving the address or when probing the reachability of a neighbor. REFERENCE RFC2461, Section 6.3.2	Integer32r/w Constraints: range: 0-3600000	.1.3.6.1.4.1.2272.1.62.1.1.2.1.12
rcIpv6InterfaceMulticastAdminStatus This indicates the admin status for multicast for this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.13
rcIpv6InterfaceRowStatus Row status for create/delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.2.1.14
rcIpv6InterfaceDhcpEnabled Enable or disable DHCP on the specified interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.15
rcIpv6InterfaceMacOffset Used to request a particular MAC for an IPv6 VLAN. Analogous to rcIpAdEntMacOffset in rcIpAddrTable. The system has 512 mac addresses of which 0-507 are reserved for Boardwalk box. 508-511 is reserved for MG. One can e…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.62.1.1.2.1.16
rcIpv6InterfaceRetransmitTimer The time (in milliseconds) between retransmissions of Neighbor Solicitation messages to a neighbor when resolving the address or when probing the reachability of a neighbor. REFERENCE RFC2461, Section 6.3.2	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.2272.1.62.1.1.2.1.17
rcIpv6InterfaceCurHopLimit The default value to be placed in the current hop limit field in router advertisements sent from this interface. The value should be set to the current diameter of the Internet. The default should be set …	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.62.1.1.2.1.18
rcIpv6InterfaceClearIcmpStats Clear ICMP statistics for an interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.20
rcIpv6InterfaceClearGeneralStats Clear general statistics for an interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.21
rcIpv6InterfaceClearNeighborCache Clear Neighbor Cache for an interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.22
rcIpv6InterfaceClearDestinationCache Clear Destination Cache for an interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.23
rcIpv6InterfaceReversePathCheckEnable Used to indicate whether this interface should perform Reverse Path Check	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.24
rcIpv6InterfaceReversePathCheckMode Reverse Path Checking mode.	Enumerationr/w Enumerated Values: 1 existonly 2 strict	.1.3.6.1.4.1.2272.1.62.1.1.2.1.25
rcIpv6InterfaceForwardingEnabled Used to indicate whether this interface should perform forwarding	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.26
rcIpv6InterfaceRsmltEnable Used to indicate whether this interface has rsmlt enabled or not	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.27
rcIpv6InterfaceBfdEnable Used to indicate whether this interface has BFD enabled or not	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.28
rcIpv6InterfaceProcessRedirect Used to indicate whether this interface has ProcessRedirect enabled or not	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.29
rcIpv6InterfaceIpsecEnable Used to indicate whether this interface has IPSec enabled or disabled	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.2.1.30

This table contains addressing information relevant
to the entity's interfaces.
          
This table does not contain multicast address 
information. Tables for such information should be 
contained in multicast specific MIBs such as RFC3019.
          
While this table is writable the user will note that several
objects, such as rcIpv6AddressOrigin, are not. The 
intention in allowing a user to write to this table is to 
allow them to add or remove any entry that isn't permanent.
The user should be  allowed to modify objects and entries 
when that would not cause inconsistencies within the table.
Allowing write access to objects such as rcIpv6AddressOrigin
could allow a user to insert an entry and then label it 
incorrectly.

rcIpv6AddressEntry row .1.3.6.1.4.1.2272.1.62.1.1.3.1

An address mapping for a particular interface. Note that
when an address is added to an interface the resulted
prefix is added to that interface.

Indexes

rcIpv6AddressIfIndex rcIpv6AddressAddr

Column	Syntax	OID
rcIpv6AddressIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IfInd…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.62.1.1.3.1.1
rcIpv6AddressAddr The IPv6 address to which this entry's addressing information pertains. This is one of the ipv6 addresses that this interface(identified by the rcIpv6AddressIfIndex) has. Implementors need to be aware t…	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.3.1.2
rcIpv6AddressType The type of address. It is either unicast or anycast IPv6 addresses (RFC3513).	Enumerationr/w Enumerated Values: 1 unicast 2 anycast	.1.3.6.1.4.1.2272.1.62.1.1.3.1.3
rcIpv6AddressPrefixLength Prefix Length value for this address. Cannot be changed after the creation. This field MUST be provided in order to create an entry in this table.	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.62.1.1.3.1.4
rcIpv6AddressPrefix A pointer to the row in the prefix table to which this address belongs. May be { 0 0 } if there is no such row.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.2272.1.62.1.1.3.1.5
rcIpv6AddressOrigin The origin of the address. The origin of the address, one of: other(1),manual(2), dhcp(4),linklayer(5), random(6)	IpAddressOriginTC Type Values: 1 other 2 manual 4 dhcp 5 linklayer 6 random	.1.3.6.1.4.1.2272.1.62.1.1.3.1.6
rcIpv6AddressStatus The status of the address, describing if the address can be used for communication. It will One of: preferred(1), deprecated(2),invalid(3),inaccessible(4),unknown(5), tentative(6), duplicate(7)	IpAddressStatusTC Type Values: 1 preferred 2 deprecated 3 invalid 4 inaccessible 5 unknown 6 tentative 7 duplicate	.1.3.6.1.4.1.2272.1.62.1.1.3.1.7
rcIpv6AddressCreated The value of sysUpTime at the time this entry was created. If this entry was created prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.62.1.1.3.1.8
rcIpv6AddressLastChanged The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.62.1.1.3.1.9
rcIpv6AddressRowStatus The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether ot…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.3.1.10
rcIpv6AddressValidLifetime Valid lifetime in seconds, indicates how long this address is valid. A result of 4294967295 means infinite	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2272.1.62.1.1.3.1.11
rcIpv6AddressPrefLifetime Preferred lifetime in seconds, indicates how long this address is in use and not deprecated. A result of 4294967295 means infinite	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2272.1.62.1.1.3.1.12
rcIpv6AddressIfType The address entry IfType indicates the type of the interface. In the case of circuit-less-IP there is no association with any ports. In other words, it can be thought of as a virtual interface. The value 'brouter …	Enumeration Enumerated Values: 1 circuitLessIP 2 brouterPort 3 vlan 4 mgmtOob 5 mgmtClip 6 mgmtVlan	.1.3.6.1.4.1.2272.1.62.1.1.3.1.13
rcIpv6AddressName The administratively assignmed name for this address.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.62.1.1.3.1.14

This table allows the user to 
determine the source of an IP address or set of 
IP addresses and allows other tables to
share the information via pointer rather than by copying.
          
For example when the node configures both a unicast and
anycast address for a prefix the ipAddressPrefix objects for
those addresses will point to a single row in this table.
          
          
This table primarily provides support for IPv6 prefixes and
several of the objects are less meaningful for IPv4.  The
table continues to allow IPv4 addresses to allow future
flexibility.  In order to promote a common configuration
this document includes suggestions for default values for
IPv4 prefixes.  Each of these values may be overridden if an
object is meaningful to the node.
          
          
All prefixes used by this entity should be included in this
table independent of how the entity learned the prefix.
(This table isn't limited to prefixes learned from router
advertisements.)

rcIpv6PrefixEntry row .1.3.6.1.4.1.2272.1.62.1.1.4.1

An entry of ipv6 prefix In the Table.

Indexes

rcIpv6PrefixIfIndex rcIpv6PrefixAddr rcIpv6PrefixLength

Column	Syntax	OID
rcIpv6PrefixIfIndex An unique value to identify an ipv6 interface. For the brouter port it is the ifindex of the port and in the case of the vlan it is the ifindex of the vlan.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.62.1.1.4.1.1
rcIpv6PrefixAddr Prefix to create an ipv6 address in ipv6 interface table.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.4.1.2
rcIpv6PrefixLength Mask to create an ipv6 prefix entry either will be advertised or suppressed	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.62.1.1.4.1.3
rcIpv6PrefixVlanId A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.62.1.1.4.1.4
rcIpv6PrefixUseDefaultVal Select one of the value to set/use it's value to default value. This is a bitmask field, setting all the bits means that all the options will be reverted to default values.	Enumerationr/w Enumerated Values: 1 none 2 valid-life 3 preferred-life 4 infinite 5 no-advertise	.1.3.6.1.4.1.2272.1.62.1.1.4.1.5
rcIpv6PrefixValidLife Valid lifetime in seconds, indicates how long this prefix advertised in the nbr advertisement is valid.	Integer32r/w Constraints: range: 0-3600000	.1.3.6.1.4.1.2272.1.62.1.1.4.1.6
rcIpv6PrefixPreferredLife Preferred lifetime in seconds, indicates how long this prefix advertised in advertisemt for this prefix.	Integer32r/w Constraints: range: 0-3600000	.1.3.6.1.4.1.2272.1.62.1.1.4.1.7
rcIpv6PrefixAtValidLife Is the date and time, upon reaching this value the prefix will be expired, if configured this option will be included in the neighbor advertisement for this prefix.	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.62.1.1.4.1.8
rcIpv6PrefixAtPreferredLife Is the date and time, upon reaching this value the prefix will be expired, if configured this option will be included in the neighbor advertisement for this prefix.	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2272.1.62.1.1.4.1.9
rcIpv6PrefixInfinite if set the prefix's valid lifetime will not exprie.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.4.1.10
rcIpv6PrefixOnLinkFlag if set then this prefix can be used for onlink determination. This value be placed in the L-bit field in the prefix information option. It is a 1 bit flag.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.4.1.11
rcIpv6PrefixAutoFlag if set then this prefix can be used for autonomous address config. This value be placed in the auto-flag field in the prefix information option. It is a 1 bit flag.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.4.1.12
rcIpv6PrefixAddressEui Use an EUI-64 interface ID in the low-order 64bits of the address when not specified in the address field. If enabled use EUI, otherwise use EUI-64 and complement U/L (Universal/Local bit). This operation should be allo…	Enumerationr/w Enumerated Values: 1 eui-not-used 2 eui-used-with-ul-complement 3 eui-used-without-ul-complement	.1.3.6.1.4.1.2272.1.62.1.1.4.1.13
rcIpv6PrefixNoAdvertise if set then this prefix can not be included in the neighbor advertisement.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.4.1.14
rcIpv6PrefixRowStatus Row status for create/delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.4.1.15
rcIpv6PrefixValidLifetime Valid lifetime in seconds, indicates how long this prefix advertised in the nbr advertisement is valid. Value of 4294967295 represents infinity.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2272.1.62.1.1.4.1.16
rcIpv6PrefixPreferredLifetime Preferred lifetime in seconds, indicates how long this prefix advertised in advertisemt for this prefix. Value of 4294967295 represents infinity.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2272.1.62.1.1.4.1.17

The table containing information 
used to construct router advertisements.

rcIpv6RouterAdvertEntry row .1.3.6.1.4.1.2272.1.62.1.1.5.1

An entry containing information used to construct
router advertisements.

Indexes

rcIpv6RouterAdvertIfIndex

Column	Syntax	OID
rcIpv6RouterAdvertIfIndex An unique value to identify an ipv6 interface. For the brouter port it is the ifindex of the port and in the case of the vlan it is the ifindex of the vlan.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.62.1.1.5.1.1
rcIpv6RouterAdvertSendAdverts A flag indicating whether or not the router sends periodic router advertisements and responds to router solicitations on this interface. REFERENCE RFC2461 Section 6.2.1	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.5.1.2
rcIpv6RouterAdvertUseDefaultVal Select one of the value to set/use it's value to default value, or set all the bits to indicate all the options will be set to their default value.	Enumerationr/w Enumerated Values: 1 none 2 send-advertisement 3 max-interval 4 min-interval 5 default-life-time 6 hop-limit 7 managed-flag 8 other-config-flag 9 dad-ns-num 10 linkMtu 11 reachableTime 12 retransmitTime	.1.3.6.1.4.1.2272.1.62.1.1.5.1.3
rcIpv6RouterAdvertMaxInterval Configure the max interval (in seconds) at which the transmission of route advertisments can occur on this interface. This must be no less than 4 seconds and no greater than 1800.	Integer32r/w Constraints: range: 4-1800	.1.3.6.1.4.1.2272.1.62.1.1.5.1.4
rcIpv6RouterAdvertMinInterval Configure the min interval (in seconds) at which the transmission of route advertisments can occur on this interface. This must be no less than 3 seconds and no greater than .75* max-interval.	Integer32r/w Constraints: range: 3-1350	.1.3.6.1.4.1.2272.1.62.1.1.5.1.5
rcIpv6RouterAdvertReachableTime The value (in milliseconds) to be placed in the router advertisement message sent by the router. The value zero means unspecified (by this router). Used to configure the amount of time th…	Integer32r/w Constraints: range: 0-36000000	.1.3.6.1.4.1.2272.1.62.1.1.5.1.6
rcIpv6RouterAdvertRetransmitTimerdeprecated The value (in milliseconds) to be placed in the retransmit timer field in router advertisement message sent from this interface. The value zero means unspecified (by this router). Used t…	Integer32 Constraints: range: 0-36000000	.1.3.6.1.4.1.2272.1.62.1.1.5.1.7
rcIpv6RouterAdvertDefaultLifeTime The value to be placed in the router lifetime field of router advertisements sent from this interface. This value MUST be either 0 or between rcIpv6RouterAdvertMaxInterval and 9000 seconds. …	Integer32r/w Constraints: range: 0-0 range: 4-9000	.1.3.6.1.4.1.2272.1.62.1.1.5.1.8
rcIpv6RouterAdvertCurHopLimit The default value to be placed in the current hop limit field in router advertisements sent from this interface. The value should be set to the current diameter of the Internet. A value of zero in the rou…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.62.1.1.5.1.9
rcIpv6RouterAdvertManagedFlag if true then the M-bit(Managed address configureation) in the router adverisement will be set. REFERENCE RFC2461 Section 6.2.1	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.5.1.10
rcIpv6RouterAdvertOtherConfigFlag if true then the O-bit (Other stateful Configuration) in the router adverisement will be set. REFERENCE RFC2461 Section 6.2.1	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.5.1.11
rcIpv6RouterAdvertDadNsNum The number of neighbor solicitation messages for DAD (Duplicate address detection). A value 0 is used to disable DAD process on this interface. A value 1 is used to send one advertisment without any retransmissions.	Integer32r/w Constraints: range: 0-600	.1.3.6.1.4.1.2272.1.62.1.1.5.1.12
rcIpv6RouterAdvertLinkMTU The value to be placed in MTU options sent by the router on this interface. A value of zero indicates that no MTU options are sent. REFERENCE RFC2461 Section 6.2.1	Unsigned32 Constraints: range: 0-0 range: 1280-1500 range: 1850-1850 range: 9500-9500	.1.3.6.1.4.1.2272.1.62.1.1.5.1.13
rcIpv6RouterAdvertRetransmitTime The value (in milliseconds) to be placed in the retransmit timer field in router advertisement message sent from this interface. The value zero means unspecified (by this router). Used t…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2272.1.62.1.1.5.1.14

This table contains list of routes that are
created by the user to destination networks.

rcIpv6StaticRouteEntry row .1.3.6.1.4.1.2272.1.62.1.1.6.1

An entry in the static route table for IPv6
can be created for a destination with a specific
prefix length; multiple entries to the same
destination are created either by specifying the
next-hop or interfaceIndex or bot…

Indexes

rcIpv6StaticRouteDest rcIpv6StaticRoutePrefixLength rcIpv6StaticRouteNextHop rcIpv6StaticRouteIfIndex

Column	Syntax	OID
rcIpv6StaticRouteDest The destination IPv6 address of this route. The values for the index objects rcIpv6StaticRouteDest and rcIpv6StaticRoutePrefixLength must be consistent. When the value of rcIpv6StaticRouteDest (excluding the zone inde…	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.6.1.1
rcIpv6StaticRoutePrefixLength Indicates the number of leading one bits which form the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpv6StaticRouteDestAddr field.	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.62.1.1.6.1.2
rcIpv6StaticRouteNextHop Next hop IPv6 address for this destination. On remote routes, the address of the next system en route. For non-remote routes, a zero length string.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.6.1.3
rcIpv6StaticRouteIfIndex The ifIndex value which identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scenario where no interface is specified.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.62.1.1.6.1.4
rcIpv6StaticRouteDistance cost/distance to reach the destination for this node.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.62.1.1.6.1.5
rcIpv6StaticRouteStatus Used to indicate the current status of entry in routing table. 1. notReachable means the route is unreachable via the specified next hop. 2. tryToResolve means the route's nexthop address requires resolution by sendin…	Enumeration Enumerated Values: 1 notReachable 2 tryToResolve 3 reachableNotInRtm 4 reachableInRtm	.1.3.6.1.4.1.2272.1.62.1.1.6.1.6
rcIpv6StaticRoutePreference Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest preference will be used instead of a lower preference one. The …	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.62.1.1.6.1.7
rcIpv6StaticRouteEnable Used to enable/disable this entry.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.6.1.8
rcIpv6StaticRouteRowStatus Row status for create/delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.6.1.9
rcIpv6StaticRouteName An administratively-assigned name for this static route	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.62.1.1.6.1.10

The IP Address Translation table used for mapping from IP
addresses to physical addresses.
          
The Address Translation tables contain the IP address to
'physical' address equivalences.  Some interfaces do not use
translation tables for determining address equivalences
(e.g., DDN-X.25 has an algorithmic method); if all
interfaces are of this type, then the Address Translation
table is empty, i.e., has zero entries.
          
While many protocols may be used to populate this table, ARP
[10] and Neighbor Discovery [4] are the most likely
options.

rcIpv6NetToPhysicalEntry row .1.3.6.1.4.1.2272.1.62.1.1.7.1

Each entry contains one IP address to `physical' address
equivalence.

Indexes

rcIpv6NetToPhysicalIfIndex rcIpv6NetToPhysicalNetAddress

Column	Syntax	OID
rcIpv6NetToPhysicalIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IfInd…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.62.1.1.7.1.1
rcIpv6NetToPhysicalNetAddress The IP Address corresponding to the media-dependent `physical' address. The address type of this object is specified in rcIpv6NetToPhysicalAddressType. Implementors need to be aware that i…	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.7.1.2
rcIpv6NetToPhysicalPhysAddress The media-dependent `physical' address. As the entries in this table are typically not persistent when this object is written the entity SHOULD NOT save the change to non-volatile storage. In the ethernet…	OctetStringr/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.62.1.1.7.1.3
rcIpv6NetToPhysicalInterface The field represents either a physical port id or the MLT port id. This entry is associated either with a port or with a MLT in a VLAN/Brouter port. If the value is 0 then the interface is CP port.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.62.1.1.7.1.4
rcIpv6NetToPhysicalLastUpdated The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.62.1.1.7.1.5
rcIpv6NetToPhysicalType The type of mapping. The 'dynamic(2)' type indicates that the IP address to physical addresses mapping has been dynamically resolved using e.g. IPv4 ARP or the IPv6 Neighbor Discovery protocol. …	Enumerationr/w Enumerated Values: 1 other 2 dynamic 3 static 4 local	.1.3.6.1.4.1.2272.1.62.1.1.7.1.6
rcIpv6NetToPhysicalState The Neighbor Unreachability Detection [4] state for the interface when the address mapping in this entry is used. If Neighbor Unreachability Detection is not in use (eg. for IPv4), this object is always unknown(6). REFE…	Enumeration Enumerated Values: 1 reachable 2 stale 3 delay 4 probe 5 invalid 6 unknown 7 incomplete	.1.3.6.1.4.1.2272.1.62.1.1.7.1.8
rcIpv6NetToPhysicalRowStatus The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effec…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.7.1.9
rcIpv6NetToPhysicalBMac If the rcIpv6NetToPhysicalEntry is learned from a SPBM network, instead of using port to track where the rcIpv6NetToPhysicalNetAddress come from, the backbone MAC address is used to track that.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.62.1.1.7.1.10
rcIpv6NetToPhysicalCvid Used to identify customer vid of the switched uni port of this entry is associated with. 4095 is not used. 4096 is reserved for untagged case.	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.62.1.1.7.1.11

IPv6 Prefix List table

rcIpv6PrefixListEntry row .1.3.6.1.4.1.2272.1.62.1.1.8.1

An entry of Ipv6 Prefix List Table.

Indexes

rcIpv6PrefixListId rcIpv6PrefixListPrefix rcIpv6PrefixListPrefixMaskLen

Column	Syntax	OID
rcIpv6PrefixListId Id of an IPv6 Prefix List	Unsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.62.1.1.8.1.1
rcIpv6PrefixListPrefix Is a member of a specific ipv6 prefix list. Adding the prefix to the given ipv6 prefix list	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.8.1.2
rcIpv6PrefixListPrefixMaskLen Mask length of the ipv6 prefix added to the prefix list	Unsigned32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.62.1.1.8.1.3
rcIpv6PrefixListMaskLenFrom Lower bound of mask length of the ipv6 prefix added to the prefix list	Unsigned32r/w Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.62.1.1.8.1.4
rcIpv6PrefixListMaskLenUpto Higher bound of mask length of the ipv6 prefix added to the prefix list	Unsigned32r/w Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.62.1.1.8.1.5
rcIpv6PrefixListName Name of the Ipv6 prefix list	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.2272.1.62.1.1.8.1.6
rcIpv6PrefixListRowStatus Used to create/delete entries in the ipv6 prefix list table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.8.1.7

DHCP Relay for Ipv6 configuration table

rcIpv6ConfDhcpRelayEntry row .1.3.6.1.4.1.2272.1.62.1.1.9.1

Used to configure DHCP on a particular L3 interface. An
entry is created automatically when the variable
rcIpv6InterfaceDhcpEnabled is set to TRUE.
Once created this entry will only be deleted if the
rcIpv6ConfDhcp…

Indexes

rcIpv6ConfDhcpIfIndex

Column	Syntax	OID
rcIpv6ConfDhcpIfIndex Interface number. The number can represent either a physical or logical(VLAN) interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.62.1.1.9.1.1
rcIpv6ConfDhcpMaxHop Used to indicate the maximum number of hops a DHCP packet can take from the source device to the destination device (i.e., DHCP client to DHCP server).	Unsigned32r/w Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.62.1.1.9.1.2
rcIpv6ConfDhcpRemoteIdEnabled Used to indicate if remote-id option is enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.9.1.3
rcIpv6ConfDhcpNumRequests The total number of DHCP requests seen on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.9.1.4
rcIpv6ConfDhcpNumReplies The total number of DHCP replies seen on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.9.1.5
rcIpv6ConfDhcpRowStatus An entry is created automatically when the variable rcIpv6InterfaceDhcpEnabled is set to TRUE. Once created this entry will only be deleted if the rcIpv6ConfDhcpRowStatus is set to 'destroy(6)', In which case, the rcIp…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.9.1.6

DHCP Relay forwarding table.

rcIpv6DhcpForwardEntry row .1.3.6.1.4.1.2272.1.62.1.1.10.1

An entry used represents a DHCP Relayed message forwarding directive.

Indexes

rcIpv6DhcpForwardAgentAddr rcIpv6DhcpForwardServerAddr

Column	Syntax	OID
rcIpv6DhcpForwardAgentAddr The IP address configured on an interface (i.e., a locally configured IP address).	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.10.1.1
rcIpv6DhcpForwardServerAddr The IP address of the DHCP server. If this IP address corresponds to a local interface address, the DHCP packet is multicast out the interface the IP address is assigned to.otherwise,the DHCP packet is sent via unicast…	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.10.1.2
rcIpv6DhcpForwardEnabled Used to indicate whether the entry should be used.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.10.1.3
rcIpv6DhcpForwardRowStatus Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.10.1.4

The RADIUS table (0 to 10 entries).  This
table lists the information of the RADIUS server.

rcIpv6RadiusServEntry row .1.3.6.1.4.1.2272.1.62.1.1.11.1

A RADIUS server table entry.

Indexes

rcIpv6RadiusServAddress rcIpv6RadiusServUsedBy

Column	Syntax	OID
rcIpv6RadiusServAddress Server IP address of the RADIUS authentication server referred to in this table entry.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.11.1.1
rcIpv6RadiusServUsedBy cli(1): for cli login, igap(2): for igap,snmp(3): for snmp login, eap(4) for EAP PAE Authenticator, web(5) for EDM.	Enumeration Enumerated Values: 1 cli 2 igap 3 snmp 4 eap 5 web	.1.3.6.1.4.1.2272.1.62.1.1.11.1.2
rcIpv6RadiusServPriority Server priority, used to control which server to choose first to send authentication.	Unsigned32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.62.1.1.11.1.3
rcIpv6RadiusServTimeOut The time interval in seconds before the client retransmit the packet.	Unsigned32r/w Constraints: range: 1-20	.1.3.6.1.4.1.2272.1.62.1.1.11.1.4
rcIpv6RadiusServEnable Enable or disable this server.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.11.1.5
rcIpv6RadiusServMaxRetries Maximum number of retransmissions.	Unsigned32r/w Constraints: range: 0-6	.1.3.6.1.4.1.2272.1.62.1.1.11.1.6
rcIpv6RadiusServUdpPort The UDP port the client is using to send requests to this server.	Unsigned32r/w Constraints: range: 1-65536	.1.3.6.1.4.1.2272.1.62.1.1.11.1.7
rcIpv6RadiusServSecretKey The identifier of the RADIUS authentication client.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.62.1.1.11.1.8
rcIpv6RadiusServAccessRequests The number of RADIUS access-response packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.9
rcIpv6RadiusServAccessAccepts The number of RADIUS access-accept packets (valid or invalid) received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.10
rcIpv6RadiusServAccessRejects The number of RADIUS access-reject packets (valid or invalid) received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.11
rcIpv6RadiusServBadResponses The number of RADIUS invalid access-response packets received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.12
rcIpv6RadiusServPendingRequests The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an access-request is sent and decremented due to receipt of an a…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.13
rcIpv6RadiusServClientRetries The number of authentication retransmission to this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.14
rcIpv6RadiusServAcctEnable Enable or disable Radius Accounting on this server.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.11.1.15
rcIpv6RadiusServAcctUdpPort The UDP port the client used to send accounting requests to this server.	Unsigned32r/w Constraints: range: 1-65536	.1.3.6.1.4.1.2272.1.62.1.1.11.1.16
rcIpv6RadiusServAcctOnRequests The number of RADIUS accounting-on packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.17
rcIpv6RadiusServAcctOffRequests The number of RADIUS accounting-off packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.18
rcIpv6RadiusServAcctStartRequests The number of RADIUS accounting-start packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.19
rcIpv6RadiusServAcctStopRequests The number of RADIUS accounting-stop packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.20
rcIpv6RadiusServAcctInterimRequests The number of RADIUS accounting-interim packets sent to this server. This does not include retransmissions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.21
rcIpv6RadiusServAcctBadResponses The number of Invalid responses received from this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.22
rcIpv6RadiusServAcctPendingRequests The number of RADIUS accounting packets that are waiting be sent to this server. This variable is incremented whenever any accounting-request is sent to this server and decremented when an acknowledgement is received or…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.23
rcIpv6RadiusServAcctClientRetries The number of RADIUS accounting packets retransmitted to this server.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.24
rcIpv6RadiusServNasIpAddress RADIUS Client NAS Identifier for this server.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.11.1.25
rcIpv6RadiusServRoundTripTime Time different between the instance when a RADIUS request is sent and the corresponding response is received.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.62.1.1.11.1.26
rcIpv6RadiusServAccessChallanges The number of RADIUS access-challanges packets sent to this server. This does not include retransmission.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.11.1.27
rcIpv6RadiusServSourceIpAddr source IP address RADIUS packets.	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.11.1.28
rcIpv6RadiusServRowStatus Used to create/delete entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.11.1.29

This table contains list of routes that are
created by the user to destination networks
 on the management port.

rcIpv6MgmtPortStaticRouteEntry row .1.3.6.1.4.1.2272.1.62.1.1.12.1

An entry in the static route table for IPv6
can be created for a destination with a specific
prefix length; multiple entries to the same
destination are created either by specifying the
next-hop or interfaceIndex or bot…

Indexes

rcIpv6MgmtPortStaticRouteIfIndex rcIpv6MgmtPortStaticRouteDest rcIpv6MgmtPortStaticRoutePrefixLength rcIpv6MgmtPortStaticRouteNextHop

Column	Syntax	OID
rcIpv6MgmtPortStaticRouteIfIndex The ifIndex value which identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scenario where no interface is specified.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.62.1.1.12.1.1
rcIpv6MgmtPortStaticRouteDest The destination IPv6 address of this route. The values for the index objects rcIpv6StaticRouteDest and rcIpv6StaticRoutePrefixLength must be consistent. When the value of rcIpv6StaticRouteDest (excluding the zone inde…	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.12.1.2
rcIpv6MgmtPortStaticRoutePrefixLength Indicates the number of leading one bits which form the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpv6MgmtPortStaticRouteDestAddr field.	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.62.1.1.12.1.3
rcIpv6MgmtPortStaticRouteNextHop Next hop IPv6 address for this destination. On remote routes, the address of the next system en route. For non-remote routes, a zero length string.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.12.1.4
rcIpv6MgmtPortStaticRouteDistance cost/distance to reach the destination for this node.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.62.1.1.12.1.5
rcIpv6MgmtPortStaticRouteStatus (1)notReachable means the route is not reachable and no neighbor request entry is built to resolved the next-hop. It happens when there is no route or neighbor to reach the static route's next-hop. (2)tryToResolve m…	Enumeration Enumerated Values: 1 notReachable 2 tryToResolve 3 reachableNotInRtm 4 reachableInRtm	.1.3.6.1.4.1.2272.1.62.1.1.12.1.6
rcIpv6MgmtPortStaticRoutePreference Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest preference will be used instead of a lower preference one. The …	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.62.1.1.12.1.7
rcIpv6MgmtPortStaticRouteEnable Used to enable/disable this entry.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.12.1.8
rcIpv6MgmtPortStaticRouteRowStatus Row status for create/delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.12.1.9

Ipv6 Destination Cache table

rcIpv6DestinationCacheEntry row .1.3.6.1.4.1.2272.1.62.1.1.13.1

Used to display Destination Cache

Indexes

rcIpv6DCacheDestAddr rcIpv6DCacheIfIndex

Column	Syntax	OID
rcIpv6DCacheDestAddr IPv6 Destination Address from the Destination Cache.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.13.1.1
rcIpv6DCacheIfIndex The last 16 bits of this object's value are interpreted as InterfaceIndex (it can represent either a physical, or a VLAN, or a tunnel interface); the first 16 bits are ignored when the object's value is interpreted.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.13.1.2
rcIpv6DCacheNextHop Ipv6 Next Hop for a Destination Cache entry.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.13.1.3
rcIpv6DCacheIfType Interface type; it can be a real (i.e. VLAN, brouter, tunnel) or a virtual circuit (i.e. VRRP, RSMLT).	Enumeration Enumerated Values: 1 real 2 virtual	.1.3.6.1.4.1.2272.1.62.1.1.13.1.4
rcIpv6DCacheIfData Used to display additional information about virtual circuits (i.e. if it is a VRRP or RSMLT circuit, the vrId if it is a VRRP circuit); no information is displayed for real circuits.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.2272.1.62.1.1.13.1.5
rcIpv6DCachePmtu Path MTU for the entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.62.1.1.13.1.6
rcIpv6DCachePmtuAge Indicates how much time (in seconds) has passed since the PMTU was updated the last time.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.13.1.7

BFD configuration table

rcIpv6InterfaceBfdEntry row .1.3.6.1.4.1.2272.1.62.1.1.14.1

Used to configure BFD on a particular interface. An
entry is created automatically when the variable
rcIpv6InterfaceBfdEnable is set to TRUE and deleted when
rcIpv6InterfaceBfdEnable is set to FALSE.

Indexes

rcIpv6InterfaceBfdIfIndex

Column	Syntax	OID
rcIpv6InterfaceBfdIfIndex Interface number. The number can represent either a physical or logical(VLAN) interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.62.1.1.14.1.1
rcIpv6InterfaceBfdMinRxInterval the min rx interval in milliseconds	Integer32r/w Constraints: range: 100-65535	.1.3.6.1.4.1.2272.1.62.1.1.14.1.2
rcIpv6InterfaceBfdTxInterval the desired tx interval in milliseconds	Integer32r/w Constraints: range: 100-65535	.1.3.6.1.4.1.2272.1.62.1.1.14.1.3
rcIpv6InterfaceBfdMultiplier the multiplier BFD wait before rx timeout	Integer32r/w Constraints: range: 1-20	.1.3.6.1.4.1.2272.1.62.1.1.14.1.4
rcIpv6InterfaceBfdHoldOffInterval This object specifies the hold off timer interval, in seconds. 0 means that hold off timer is disabled.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.62.1.1.14.1.6
rcIpv6InterfaceBfdStaticFlag This object specifies the static-flag for bfd. When disabled, the static route will go down, when bfd is disabled.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.62.1.1.14.1.7
rcIpv6InterfaceBfdVrfId Indicates the Virtual Router to which the IPv6 BFD instance belongs.	RC-VRF-MIBVrfIdentifierr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.14.1.8
rcIpv6InterfaceBfdVrfName The Name of the Virtual Router to which the IPv6 BFD instance belongs.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.62.1.1.14.1.9

This entity's IPV6 Routing table.

rcIpv6RouteEntry row .1.3.6.1.4.1.2272.1.62.1.1.15.1

A route to a particular destination.

Indexes

rcIpv6RouteDest rcIpv6RoutePfxLength rcIpv6RouteIndex

Column	Syntax	OID
rcIpv6RouteDest The destination IPv6 address of this route. This object may not take a Multicast address value.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.15.1.1
rcIpv6RoutePfxLength Indicates the prefix length of the destination address.	bitsInteger32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.62.1.1.15.1.2
rcIpv6RouteIndex The value which uniquely identifies the route among the routes to the same network layer destination. The way this value is chosen is implementation specific but it must be unique for rcIpv6RouteDest/rcIpv6RoutePfxLeng…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.15.1.3
rcIpv6RouteNextHopId Identifier of the next-hop, hostname or mac adress.	OctetString Constraints: range: 255-255	.1.3.6.1.4.1.2272.1.62.1.1.15.1.4

IPv6 Default Routers Table.

rcIpv6DefaultRoutersEntry row .1.3.6.1.4.1.2272.1.62.1.1.16.1

The entry for the IPv6 Default Routers Table.

Indexes

rcIpv6DefaultRoutersAddress rcIpv6DefaultRoutersIfIndex

Column	Syntax	OID
rcIpv6DefaultRoutersAddress Learned Router Address for an IPv6 Default Routers Entry.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.16.1.1
rcIpv6DefaultRoutersIfIndex Interface number for an IPv6 Default Routers Entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.16.1.2
rcIpv6DefaultRoutersLifetime Remaining Router Lifetime for an IPv6 Default Routers Entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.62.1.1.16.1.3
rcIpv6DefaultRoutersActive See if a default router is active for an IPv6 Default Routers Entry.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.16.1.4

IPv6 MLD Host Cache Table.

rcIpv6MLDHostCacheEntry row .1.3.6.1.4.1.2272.1.62.1.1.17.1

The entry for the IPv6 MLD Host Cache Table.

Indexes

rcIpv6MLDHostCacheIfIndex rcIpv6MLDHostCacheGrpAddress

Column	Syntax	OID
rcIpv6MLDHostCacheIfIndex Interface number for an IPv6 MLD Host Cache Entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.17.1.1
rcIpv6MLDHostCacheGrpAddress Group Address for an IPv6 MLD Host Cache Entry.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.17.1.2
rcIpv6MLDHostCacheGrpLocallyRegistered Group Locally Registered for an IPv6 MLD Host Cache Entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.62.1.1.17.1.3
rcIpv6MLDHostCacheGrpLastReporter Group Last Reporter Address for an IPv6 MLD Host Cache Entry.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.17.1.4
rcIpv6MLDHostCacheGrpUpTime Group Uptime for an IPv6 MLD Host Cache Entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.17.1.5
rcIpv6MLDHostCacheGrpExpiryTime Group Expiry Time for an IPv6 MLD Host Cache Entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.17.1.6
rcIpv6MLDHostCacheGrpFilterMode Group Filter Mode for an IPv6 MLD Host Cache Entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.17.1.7

A table that containing information on configured tunnels.

rcTunnelXInetConfigEntry row .1.3.6.1.4.1.2272.1.62.1.1.18.1

An entry containing additional tunnel information. This
object augments tunnelInetConfigEntry.

Indexes

No indexes recorded

Column	Syntax	OID
rcTunnelXInetConfigStatus Indicates the tunnel status	Enumerationr/w Enumerated Values: 1 inactive 2 active	.1.3.6.1.4.1.2272.1.62.1.1.18.1.1
rcTunnelXInetConfigMode Indicates the tunnel mode	Enumerationr/w Enumerated Values: 1 management 2 data	.1.3.6.1.4.1.2272.1.62.1.1.18.1.2

This entity's IPV6 Routing table.

rcIpv6RouteExtensionEntry row .1.3.6.1.4.1.2272.1.62.1.1.19.1

A route to a particular destination.

Indexes

No indexes recorded

Column	Syntax	OID
rcIpv6RouteExtensionNextHopId Identifier of the next-hop, hostname or mac adress.	OctetString Constraints: range: 255-255	.1.3.6.1.4.1.2272.1.62.1.1.19.1.1
rcIpv6RouteExtensionProtocol The routing mechanism via which this route was learned.	Enumeration Enumerated Values: 1 other 2 local 3 netmgmt 4 ndisc 5 rip 6 ospf 7 bgp 8 idrp 9 igrp 10 isis	.1.3.6.1.4.1.2272.1.62.1.1.19.1.2
rcIpv6RouteExtensionPathType Indicates IPv6 route path type: best, alternative, ECMP.	Enumeration Enumerated Values: 1 b 2 be 3 a 4 ae	.1.3.6.1.4.1.2272.1.62.1.1.19.1.3
rcIpv6RouteExtensionSrcVrfId srcVrfId of the next-hop address. If the route is an ISIS route, advertised under an ISID that i snot locally configured, on any VRF, srcVrfId will be 1023	RC-VRF-MIBVrfIdentifier Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.19.1.4
rcIpv6RouteExtensionLayer3VirtualInterface Identifier of the Layer 3 Virtual Interface - SPB I-SID. 0 denotes GlobalRouter and 1 denotes not applicable to route	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.62.1.1.19.1.5

IPv6 Route Pref table. This table and
rcIpNewRoutePrefTable is designed
to obsolete the rcIpRoutePrefTable

rcIpv6RoutePrefEntry row .1.3.6.1.4.1.2272.1.62.1.1.20.1

An entry of Ipv6 Route Pref Table.

Indexes

rcIpv6RoutePrefDefaultValue

Column	Syntax	OID
rcIpv6RoutePrefDefaultValue Shows the default preference value for the given protocol.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.62.1.1.20.1.1
rcIpv6RoutePrefProtocol Protocol name	Enumeration Enumerated Values: 1 local 2 static 3 ospfv3Intra 4 ospfv3Inter 5 ospfv3External1 6 ospfv3External2 7 spbmLevel1 8 ebgp 9 ibgp 10 ripng	.1.3.6.1.4.1.2272.1.62.1.1.20.1.2
rcIpv6RoutePrefConfiguredValue This value is configurable by the user	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.62.1.1.20.1.3

This table contains the entries which are 
snooped by different methods.

rcIpv6FhsSnoopEntry row .1.3.6.1.4.1.2272.1.62.1.1.21.1

An entry containing a learned DHCPv6 binding.

Indexes

rcIpv6FhsSnoopVlanId rcIpv6FhsSnoopIpv6Address

Column	Syntax	OID
rcIpv6FhsSnoopVlanId The VLAN to which the snooped entry belongs.	RAPID-CITYRcVlanIdOrNone Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.62.1.1.21.1.1
rcIpv6FhsSnoopIpv6Address The IPv6 address assigned to this IPv6 host.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.2272.1.62.1.1.21.1.2
rcIpv6FhsSnoopMacAddress The MAC address of the snooped entry.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.62.1.1.21.1.3
rcIpv6FhsSnoopInterfaceIndex The interface on which the entry is learnt.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.62.1.1.21.1.4
rcIpv6FhsSnoopEntryType Indicates the type of entry - static (1) or dynamic (2).	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.2272.1.62.1.1.21.1.5
rcIpv6FhsSnoopEntrySource Indicates the method entry was learnt from - static (1) or dhcp (2).	Enumeration Enumerated Values: 1 static 2 dhcp	.1.3.6.1.4.1.2272.1.62.1.1.21.1.6
rcIpv6FhsSnoopValidTime The valid time for the snooped entry.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.21.1.7
rcIpv6FhsSnoopTimeToExpiry The time to expiry of the snooped entry.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.62.1.1.21.1.8
rcIpv6FhsSnoopRowStatus Row status to create/delete snooped entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.21.1.9

IPv6 Isis In Filter Nick Name table

rcIpv6IsisInFilterNickNameEntry row .1.3.6.1.4.1.2272.1.62.1.1.23.1.1

An entry of Ipv6 Isis In Filter Nick Name Table.

Indexes

rcIpv6IsisInFilterNickNameAdvertisingRtr

Column	Syntax	OID
rcIpv6IsisInFilterNickNameAdvertisingRtr NickName used to filter by	RC-IP-MIBIpIsisPlsbNodeNickName Type Constraints: range: 3	.1.3.6.1.4.1.2272.1.62.1.1.23.1.1.1
rcIpv6IsisInFilterNickNameEnable Enables or disables the Nick Name entry. The value must be enabled to filter.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.23.1.1.2
rcIpv6IsisInFilterNickNamePolicyName Route Map name used	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.62.1.1.23.1.1.3
rcIpv6IsisInFilterNickNameRowStatus Ipv6 Isis In Filter Nick Name Table Row Status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.23.1.1.4

IPv6 Isis In Filter Isid Isid table

rcIpv6IsisInFilterIsidEntry row .1.3.6.1.4.1.2272.1.62.1.1.23.2.1

An entry of Ipv6 Isis In Filter Table.

Indexes

rcIpv6IsisInFilterIsid

Column	Syntax	OID
rcIpv6IsisInFilterIsid Isid value used to filter by	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.62.1.1.23.2.1.1
rcIpv6IsisInFilterIsidEnable Enables or disables the Isid entry. The value must be enabled to filter.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.62.1.1.23.2.1.2
rcIpv6IsisInFilterIsidPolicyName Route Map name used	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.62.1.1.23.2.1.3
rcIpv6IsisInFilterIsidRowStatus IPv6 Isis In Filter Isid Table Row Status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.62.1.1.23.2.1.4