RC-IP-ROUTING-MIB Table View

Table used to maintain source address information.

rcIpSourceInterfaceEntry row .1.3.6.1.4.1.2272.1.8.4.8.1

An entry of Ip Source Interface Table.

Indexes

rcIpSourceInterfaceAppId

Column	Syntax	OID
rcIpSourceInterfaceAppId The application which can be set to use a specific interface as source IP address in packets sent from the switch.	Enumeration Enumerated Values: 1 radius 2 syslog 3 tacacs 4 snmp 5 ssh 6 telnet	.1.3.6.1.4.1.2272.1.8.4.8.1.1
rcIpSourceInterfaceType The type of source address used.	Enumerationr/w Enumerated Values: 1 none 2 loopback 3 vlan	.1.3.6.1.4.1.2272.1.8.4.8.1.2
rcIpSourceInterfaceId The ID of the interface used as source address. An ID of 0 means no interface is currently set for this entry.	Integer32r/w Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.8.4.8.1.3

This entity's IP Routing table.

rcIpRouteEntry row .1.3.6.1.4.1.2272.1.8.7.1

A route to a particular destination.

Indexes

rcIpRouteDest rcIpRouteMask rcIpRouteNextHop rcIpRouteAltSequence

Column	Syntax	OID
rcIpRouteDest The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is depende…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.7.1.1
rcIpRouteMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the va…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.7.1.2
rcIpRouteNextHop The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface).	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.7.1.3
rcIpRouteMetric The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. If this metric is not used, its value should be set to -1.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.7.1.4
rcIpRouteIfIndex The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.8.7.1.5
rcIpRouteType The type of route.	Enumeration Enumerated Values: 1 other 3 direct 4 indirect	.1.3.6.1.4.1.2272.1.8.7.1.6
rcIpRouteProto The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.	Enumeration Enumerated Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 is-is 10 es-is 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp 15 vOspf 16 vBgp 17 vRip	.1.3.6.1.4.1.2272.1.8.7.1.7
rcIpRouteAge The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was l…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.7.1.8
rcIpRouteRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.7.1.9
rcIpRoutePref	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.7.1.10
rcIpRouteAltSequence Alternative Route Sequence. 0 denotes Best Route.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.7.1.11
rcIpRoutePathType The type of route. It is a combination of direct, indirect, best, alternative and ECMP path.	Enumeration Enumerated Values: 0 iA 1 iAE 2 iB 3 iBE 6 dB 8 iAN 9 iAEN 10 iBN 11 iBEN 14 dBN 16 iAU 17 iAEU 18 iBU 19 iBEU 22 dBU 34 iBF 35 iBEF 66 iBV 67 iBEV 74 iBVN 75 iBEVN 128 iAS 129 iASE 130 iBS 131 iBSE 138 iBSN 139 iBSEN 192 iASV 193 iASVE 194 iBSV 195 iBSVE	.1.3.6.1.4.1.2272.1.8.7.1.12
rcIpRouteSrcVrfId srcVrfId of next-hop address	RC-VRF-MIBVrfIdentifierr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.7.1.13
rcIpRouteNextHopId Identifier of the next-hop, hostname or mac adress.	OctetString Constraints: range: 255-255	.1.3.6.1.4.1.2272.1.8.7.1.14
rcIpRouteLayer3VirtualInterfaceType Identifies type for value specified in the rcIpRouteLayer3VirtualInterface field.	Enumeration Enumerated Values: 1 none 2 spb	.1.3.6.1.4.1.2272.1.8.7.1.15
rcIpRouteLayer3VirtualInterface Identifier of the Layer3 Virtual Interface. When the value is an SPB I-SID, 0 denotes GlobalRouter and -1 denotes not applicable to route.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.7.1.16

This table is used to add static IP routes to
the device.  Routes added into this table will
automatically show-up in the 'rcIpRouteTable'
when the device is actively using the route
to forward IP traffic.

rcIpStaticRouteEntry row .1.3.6.1.4.1.2272.1.8.15.2.1

A static route to a particular destination.

Indexes

rcIpStaticRouteDest rcIpStaticRouteMask rcIpStaticRouteNextHop

Column	Syntax	OID
rcIpStaticRouteDest The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is depende…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.15.2.1.1
rcIpStaticRouteMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the va…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.15.2.1.2
rcIpStaticRouteNextHop The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface).	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.15.2.1.3
rcIpStaticRouteMetric The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. If this metric is not used, its value should be set to -1.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.8.15.2.1.4
rcIpStaticRouteIfIndex The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.15.2.1.5
rcIpStaticRoutePreference Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest preference will be used instead of a lower preference one. The …	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.8.15.2.1.6
rcIpStaticRouteEnable Used to enable/disable this entry.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.15.2.1.7
rcIpStaticRouteStatus Used to indicate the current status of this entry.	Enumeration Enumerated Values: 0 inactive 1 active	.1.3.6.1.4.1.2272.1.8.15.2.1.8
rcIpStaticRouteRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.15.2.1.9
rcIpStaticRouteLocalNextHop Used to enable/disable this entry. True indicate that the static route becomes active only if switch has a local route to the network. False indicates that the static route becomes active if switch has a local route or…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.15.2.1.10

This table is used to hold next hop addresses on which BFD is enabled.

rcIpStaticRouteBfdEntry row .1.3.6.1.4.1.2272.1.8.15.4.1

An IP address of the next hop of the BFD session.

Indexes

rcIpStaticRouteBfdNextHop

Column	Syntax	OID
rcIpStaticRouteBfdNextHop The IP address of the next hop of the BFD session.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.15.4.1.1
rcIpStaticRouteBfdRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.15.4.1.2
rcIpStaticRouteBfdVrfId Indicates the Virtual Router to which the IPv4 static route BFD instance belongs.	RC-VRF-MIBVrfIdentifierr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.15.4.1.3
rcIpStaticRouteBfdVrfName The Name of the Virtual Router to which the IPv4 static route BFD instance belongs.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.8.15.4.1.4

This table is used to add static IP routes to
the device.  Routes added into this table will
automatically show-up in the 'rcIpRouteTable'
when the device is actively using the route
to forward IP traffic.

rcIpInterVrfStaticRouteEntry row .1.3.6.1.4.1.2272.1.8.103.2.1

A static route to a particular destination.

Indexes

rcIpInterVrfStaticRouteOwnerVrfId rcIpInterVrfStaticRouteDest rcIpInterVrfStaticRouteMask rcIpInterVrfStaticRouteNextHop

Column	Syntax	OID
rcIpInterVrfStaticRouteOwnerVrfId Owner VRF id of the static route	RC-VRF-MIBVrfIdentifier Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.103.2.1.1
rcIpInterVrfStaticRouteDest The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is depende…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.103.2.1.2
rcIpInterVrfStaticRouteMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the va…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.103.2.1.3
rcIpInterVrfStaticRouteNextHop The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface).	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.103.2.1.4
rcIpInterVrfStaticRouteMetric The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. If this metric is not used, its value should be set to -1.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.8.103.2.1.5
rcIpInterVrfStaticRouteIfIndex The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.103.2.1.6
rcIpInterVrfStaticRoutePreference Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest preference will be used instead of a lower preference one. The …	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.8.103.2.1.7
rcIpInterVrfStaticRouteEnable Used to enable/disable this entry.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.103.2.1.8
rcIpInterVrfStaticRouteStatus Used to indicate the current status of this entry.	Enumeration Enumerated Values: 0 inactive 1 active	.1.3.6.1.4.1.2272.1.8.103.2.1.9
rcIpInterVrfStaticRouteRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.103.2.1.10
rcIpInterVrfStaticRouteLocalNextHop Used to enable/disable this entry. True indicate that the static route becomes active only if switch has a local route to the network. False indicates that the static route becomes active if switch has a local route or …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.103.2.1.11
rcIpInterVrfStaticRouteNextHopVrfId Used to indicate nhVrfId in inter-VRF static-route configuration	RC-VRF-MIBVrfIdentifierr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.103.2.1.12
rcIpInterVrfStaticRouteName An administratively-assigned name for this static route	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.103.2.1.13