RC-IP-POLICY-MIB Table View

A table used to store different types list entries.
Each row in the table contains a list entry that is
used by a set of announce policies.

rcIpPolicyAddrEntry row .1.3.6.1.4.1.2272.1.8.11.2.1

Route entry attributes.

Indexes

rcIpPolicyAddrIpAddr

Column	Syntax	OID
rcIpPolicyAddrIpAddrdeprecated The network address for this type of list entry. This value is required for all types of lists.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.11.2.1.1
rcIpPolicyAddrIddeprecated Identifier of this entry. Used internally to identify this entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.11.2.1.2
rcIpPolicyAddrAddrListIdListSizedeprecated Used to indicate the number of id(s) in the rcIpPolicyAddrListIdList variable.	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.11.2.1.3
rcIpPolicyAddrAddrListIdListdeprecated Used to indicate zero or more rcIpPolicyAddrListEntry(s) that are referring to this entry. Each list-id identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to ze…	OctetString Constraints: range: 256-256	.1.3.6.1.4.1.2272.1.8.11.2.1.4
rcIpPolicyAddrRowStatusdeprecated Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.11.2.1.5

A table used to store different types list entries.
Each row in the table contains a list entry that is
used by a set of announce policies.

rcIpPolicyNetEntry row .1.3.6.1.4.1.2272.1.8.11.4.1

Route entry attributes.

Indexes

rcIpPolicyNetAddr rcIpPolicyNetMask

Column	Syntax	OID
rcIpPolicyNetAddrdeprecated The network address for this type of list entry. This value is required for all types of lists.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.11.4.1.1
rcIpPolicyNetMaskdeprecated The route mask for this type of list entry. This value is meaningful only if rcIpPolicyNetEntry is equal to exactNet(1), rangeNet(2), advertiseNet(3). For other types it should have the value 0.0.0.0.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.11.4.1.2
rcIpPolicyNetIddeprecated Used internally to recognize this entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.11.4.1.3
rcIpPolicyNetNetListIdListSizedeprecated Used to indicate the number of id(s) in the rcIpPolicyNetListIdList variable.	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.11.4.1.4
rcIpPolicyNetNetListIdListdeprecated Used to indicate zero or more rcIpPolicyNetListEntry(s) that are referring to this entry. Each list-id identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to ze…	OctetString Constraints: range: 256-256	.1.3.6.1.4.1.2272.1.8.11.4.1.5
rcIpPolicyNetRowStatusdeprecated Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.11.4.1.6

A table used to group rcIpPolicyAddrEntry(s) 
into a list.

rcIpPolicyAddrListEntry row .1.3.6.1.4.1.2272.1.8.11.6.1

Route entry attributes.

Indexes

rcIpPolicyAddrListId

Column	Syntax	OID
rcIpPolicyAddrListIddeprecated A value that uniquely identifies this list of rcIpPolicyAddrListEntry.	Integer32 Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.8.11.6.1.1
rcIpPolicyAddrListNamedeprecated An administratively-assigned name for this list.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.8.11.6.1.3
rcIpPolicyAddrListIdListSizedeprecated Used to indicate the number of rcIpPolicyAddrNetEntry id(s) in the rcIpPolicyAddrListIdList variable.	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.11.6.1.4
rcIpPolicyAddrListIdListdeprecated Used to indicate zero or more AddrListId that are associated to this list. Each AddrList identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2272.1.8.11.6.1.5
rcIpPolicyAddrListPolicyIdListSizedeprecated Used to indicate the number of policy id(s) in the Policy Id list. That are referring to this list.	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.11.6.1.6
rcIpPolicyAddrListPolicyIdListdeprecated Used to indicate zero or more policies that are referring to this entry. Each policy identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.	OctetString Constraints: range: 256-256	.1.3.6.1.4.1.2272.1.8.11.6.1.7
rcIpPolicyAddrListRowStatusdeprecated Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.11.6.1.8

A table used to store set of announce policies 
configured for RIP routing protocol. The Number
of entries is given by rcIpPolicyNumRipPolicies.

rcIpPolicyRipAnnounceEntry row .1.3.6.1.4.1.2272.1.8.11.8.1

Entry containing configuration information for a
particular announce policy.

Indexes

rcIpPolicyRipAnnounceId

Column	Syntax	OID
rcIpPolicyRipAnnounceIddeprecated A value that uniquely identifies the policy associated with this entry.	Integer32 Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.8.11.8.1.1
rcIpPolicyRipAnnounceNamedeprecated An administratively-assigned name for this policy.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.8.11.8.1.2
rcIpPolicyRipAnnounceEnabledeprecated It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.11.8.1.3
rcIpPolicyRipAnnounceExactNetListIddeprecated Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.8.1.4
rcIpPolicyRipAnnounceRangeNetListIddeprecated Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the add…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.8.1.5
rcIpPolicyRipAnnounceRipGatewayListIddeprecated Used to identify the RIP-gatewayList in the list that are associated with this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list contains one…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.8.1.6
rcIpPolicyRipAnnounceRipInterfaceListIddeprecated Used to indicate the number of entries in the ripInterfaceIdList that are configured for this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list …	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.8.1.7
rcIpPolicyRipAnnounceOspfRouterListIddeprecated Used to indicate the number of entries in the OspfRouteIds that are configured for this policy. This field has meaning only for OSPF sourced routes and if OSPF is included as a RouteSource. The list cont…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.8.1.8
rcIpPolicyRipAnnounceAnnounceInterfaceListIddeprecated Used to indicate the number of entries in the AnnounceInterfaceids that are configured for this policy. The list contains one or more outbound interface addresses. If the outbound interface address in t…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.8.1.9
rcIpPolicyRipAnnouncePrecedencedeprecated Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is use…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.11.8.1.10
rcIpPolicyRipAnnounceRouteSourcedeprecated Is represented as bitset to indicate route sources. It can contain one or more route sources. If the route source is in this bit map, then a route from that source that meets the other criteria of this policy will ma…	Enumerationr/w Enumerated Values: 1 direct 2 static 4 rip 8 ospf 15 any	.1.3.6.1.4.1.2272.1.8.11.8.1.11
rcIpPolicyRipAnnounceAdvertiseNetListIddeprecated Used to indicate the number of entries in the AdvertiseNetList that are configured for this policy. This has meaning only if the Action is set to 'announce'. It is useful to send or advertise networks tha…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.8.1.12
rcIpPolicyRipAnnounceActiondeprecated It indicates whether the route should be announced or not.	Enumerationr/w Enumerated Values: 1 announce 2 ignore	.1.3.6.1.4.1.2272.1.8.11.8.1.13
rcIpPolicyRipAnnounceOspfRouteTypedeprecated Ospf Route type. It applies to OSPF sourced routes only. 'type1' means to apply this policy to only type1 OSPF external routes. 'type2' means to apply this policy to only type2 OSPF external routes. 'internal' means '…	Enumerationr/w Enumerated Values: 1 type1 2 type2 3 external 4 internal 5 any	.1.3.6.1.4.1.2272.1.8.11.8.1.14
rcIpPolicyRipAnnounceRipMetricdeprecated RIP metric. The value is meaningful only if the action is set to 'announce'. This is optional export metric to use when advertising a route that matches this policy. If set to zero, the routing table metric calculated…	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.8.11.8.1.15
rcIpPolicyRipAnnounceRowStatusdeprecated Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.11.8.1.16

A table used to store set of announce policies 
configured for OSPF routing protocol. The Number
of entries is given by rcIpPolicyNumOspfPolicies.

rcIpPolicyOspfAnnounceEntry row .1.3.6.1.4.1.2272.1.8.11.10.1

Entry containing configuration information for a
particular announce policy.

Indexes

rcIpPolicyOspfAnnounceId

Column	Syntax	OID
rcIpPolicyOspfAnnounceIddeprecated A value that uniquely identifies the policy associated with this entry.	Integer32 Constraints: range: 2001-3000	.1.3.6.1.4.1.2272.1.8.11.10.1.1
rcIpPolicyOspfAnnounceNamedeprecated An administratively-assigned name for this policy.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.8.11.10.1.2
rcIpPolicyOspfAnnounceEnabledeprecated It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.11.10.1.3
rcIpPolicyOspfAnnounceExactNetListIddeprecated Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match …	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.10.1.4
rcIpPolicyOspfAnnounceRangeNetListIddeprecated Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the addr & m…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.10.1.5
rcIpPolicyOspfAnnounceRipGatewayListIddeprecated Used to identify the RIP-gatewayList in the list that are associated with this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list contains one or …	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.10.1.6
rcIpPolicyOspfAnnounceRipInterfaceListIddeprecated Used to indicate the number of entries in the ripInterfaceIdList that are configured for this policy. This field has meaning only for RIP sourced routes and if RIP is included as a RouteSource. The list c…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.10.1.7
rcIpPolicyOspfAnnouncePrecedencedeprecated Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is use…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.11.10.1.8
rcIpPolicyOspfAnnounceRouteSourcedeprecated Is represented as bit map to indicate route sources. It can contain one or more route sources. If the route source is in this bit map, then a route from that source that meets the other criteria of this policy will m…	Enumerationr/w Enumerated Values: 1 direct 2 static 4 rip 7 any	.1.3.6.1.4.1.2272.1.8.11.10.1.9
rcIpPolicyOspfAnnounceAdvertiseNetListIddeprecated Used to indicate the number of entries in the AdvertiseNetList that are configured for this policy. This has meaning only if the Action is set to 'announce'. It is useful to send or advertise networks tha…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.10.1.10
rcIpPolicyOspfAnnounceActiondeprecated It indicates whether the route should be announced or not.	Enumerationr/w Enumerated Values: 1 announce 2 ignore	.1.3.6.1.4.1.2272.1.8.11.10.1.11
rcIpPolicyOspfAnnounceExtMetricTypedeprecated Ospf External metric type. It is used to indicate what type of the external metric it is. 'type1' means to the cost is 'internal ospf cost + ExtMetric'. 'type2' means the ospf-metric is equal to 'type2'.	Enumerationr/w Enumerated Values: 1 type1 2 type2	.1.3.6.1.4.1.2272.1.8.11.10.1.12
rcIpPolicyOspfAnnounceExtMetricdeprecated OSPF External metric. The value is meaningful only if the action is set to 'announce'. This is optional export metric to use when advertising a route that matches this policy. Value '0' is used to indicate that route…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.11.10.1.13
rcIpPolicyOspfAnnounceRowStatusdeprecated Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.11.10.1.14

A table used to store set of accept policies 
configured for RIP routing protocol. The Number
of entries is given by rcIpPolicyNumRipPolicies.

rcIpPolicyRipAcceptEntry row .1.3.6.1.4.1.2272.1.8.11.12.1

Entry containing configuration information for a
particular accept policy.

Indexes

rcIpPolicyRipAcceptId

Column	Syntax	OID
rcIpPolicyRipAcceptIddeprecated A value that uniquely identifies the policy associated with this entry.	Integer32 Constraints: range: 4001-5000	.1.3.6.1.4.1.2272.1.8.11.12.1.1
rcIpPolicyRipAcceptNamedeprecated An administratively-assigned name for this policy.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.8.11.12.1.2
rcIpPolicyRipAcceptEnabledeprecated It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.11.12.1.3
rcIpPolicyRipAcceptExactNetListIddeprecated Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.12.1.4
rcIpPolicyRipAcceptRangeNetListIddeprecated Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the add…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.12.1.5
rcIpPolicyRipAcceptRipGatewayListIddeprecated Used to identify the RIP-gatewayList in the PolicyListTable that iares associated with this policy. The list contains the addresses of one or more routers that could send RIP updates to this router. If a router addre…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.12.1.6
rcIpPolicyRipAcceptRipInterfaceListIddeprecated Used to indicate ListId defined for RipInterfaceList in the rcIpPolicyListTable that is assiciated with this policy. The list contains the addresses of one or more interfaces on this router. If an interface address i…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.12.1.7
rcIpPolicyRipAcceptPrecedencedeprecated Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is use…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.11.12.1.8
rcIpPolicyRipAcceptActiondeprecated It indicates whether the route should be acceptd or not.	Enumerationr/w Enumerated Values: 1 accept 2 ignore	.1.3.6.1.4.1.2272.1.8.11.12.1.9
rcIpPolicyRipAcceptInjectNetListIddeprecated Used to indicate the ListId of the InjectNetList in the rcIpPolicyListTable entry that is assiciated with for this policy. If teh action is 'accept' and if it is desired to insert networks into the routing table that di…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.12.1.10
rcIpPolicyRipAcceptApplyMaskdeprecated If the 'action' is set to 'accept' and the actual received network will be considered, this is an optional IP address mask that will be applied to the network number from the RIP update. This is used to override the …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.11.12.1.11
rcIpPolicyRipAcceptRowStatusdeprecated Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.11.12.1.12

A table used to store set of accept policies 
configured for RIP routing protocol. The Number
of entries is given by rcIpPolicyNumRipPolicies.

rcIpPolicyOspfAcceptEntry row .1.3.6.1.4.1.2272.1.8.11.14.1

Entry containing configuration information for a
particular accept policy.

Indexes

rcIpPolicyOspfAcceptId

Column	Syntax	OID
rcIpPolicyOspfAcceptIddeprecated A value that uniquely identifies the policy associated with this entry.	Integer32 Constraints: range: 6001-7000	.1.3.6.1.4.1.2272.1.8.11.14.1.1
rcIpPolicyOspfAcceptNamedeprecated An administratively-assigned name for this policy.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.8.11.14.1.2
rcIpPolicyOspfAcceptEnabledeprecated It indicates whether this policy is enabled or not. The policy should be applied only if it is set to 'true'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.11.14.1.3
rcIpPolicyOspfAcceptExactNetListIddeprecated Used to indicate the number of 'exact' type entries that are configured for this policy. An entry with type 'exactNet' or 'rangeNet' represents the network list. This indicates which networks will match…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.14.1.4
rcIpPolicyOspfAcceptRangeNetListIddeprecated Used to indicate zero or more 'range' network entries that are associated with this policy. An entry with a 'range' type means to match any network number that falls in the range indicated by the add…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.14.1.5
rcIpPolicyOspfAcceptPrecedencedeprecated Is used while comparing this policy rule with other policy that a given route may match. A rule with a higher precedence value will be chosen over one with a smaller value. In the case of a tie, the PolicyId is use…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.11.14.1.6
rcIpPolicyOspfAcceptActiondeprecated It indicates whether the route should be acceptd or not.	Enumerationr/w Enumerated Values: 1 accept 2 ignore	.1.3.6.1.4.1.2272.1.8.11.14.1.7
rcIpPolicyOspfAcceptInjectNetListIddeprecated Used to indicate the ListId of the InjectNetList in the rcIpPolicyListTable entry that is assiciated with for this policy. If teh action is 'accept' and if it is desired to insert networks into the routing table that di…	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.8.11.14.1.8
rcIpPolicyOspfAcceptExtTypedeprecated Used to indicate the ospf external type. This parameter describes which types of OSPF ASE routes match this policy. 'any' means 'match either ASE type 1 or 2'. 'type1' means 'match any external type 1'. 'type2' means…	Enumerationr/w Enumerated Values: 1 type1 2 type2 3 any	.1.3.6.1.4.1.2272.1.8.11.14.1.9
rcIpPolicyOspfAcceptRowStatusdeprecated Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.11.14.1.10

A table used to group rcIpPolicyAddrEntry(s) 
into a list.

rcIpPolicyNetListEntry row .1.3.6.1.4.1.2272.1.8.11.16.1

Route entry attributes.

Indexes

rcIpPolicyNetListId

Column	Syntax	OID
rcIpPolicyNetListIddeprecated A value that uniquely identifies this list of rcIpPolicyNetListEntry.	Integer32 Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.8.11.16.1.1
rcIpPolicyNetListNamedeprecated An administratively-assigned name for this list.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.8.11.16.1.3
rcIpPolicyNetListIdListSizedeprecated Used to indicate the number of rcIpPolicyNetEntry id(s) in the rcIpPolicyNetListIdList variable.	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.11.16.1.4
rcIpPolicyNetListIdListdeprecated Used to indicate zero or more NetListId that are associated to this list. Each NetList identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.	OctetStringr/w Constraints: range: 256-256	.1.3.6.1.4.1.2272.1.8.11.16.1.5
rcIpPolicyNetListPolicyIdListSizedeprecated Used to indicate the number of policy id(s) in the Policy Id list. That are referring to this list.	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.8.11.16.1.6
rcIpPolicyNetListPolicyIdListdeprecated Used to indicate zero or more policies that are referring to this entry. Each policy identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.	OctetString Constraints: range: 256-256	.1.3.6.1.4.1.2272.1.8.11.16.1.7
rcIpPolicyNetListRowStatusdeprecated Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.11.16.1.8