RC-IP-MIB Table View

A table used to maintain IP routing information 
for a particular interface.

rcIpConfEntry row .1.3.6.1.4.1.2272.1.8.1.1.1

Entry containing IP routing information. An entry
is automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.

Indexes

rcIpConfIfIndex

Column	Syntax	OID
rcIpConfIfIndex An unique value to identify a physical interface or a logical interface (VLAN).	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2272.1.8.1.1.1.1
rcIpConfAdvertDefRte Used to indicate whether this interface should advertize a RIP default route.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.2
rcIpConfAcceptDefRte Used to indicate whether this interface should accept a RIP default route.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.3
rcIpConfRowStatus Row status for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.1.1.1.4
rcIpConfRipEnable Enable or disable RIP routing on the specified interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.5
rcIpConfOspfEnable Enable or disable OSPF routing on the specified interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.6
rcIpConfIgmpEnable Enable or disable IGMP on the specified interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.7
rcIpConfAddrAssigned Indicate whether IpAddress has been assigned for this interface.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.8
rcIpConfDhcpEnable Enable or disable DHCP on the specified interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.9
rcIpConfTriggeredUpdateEnable Used to indicate whether the RIP triggered update feature should be enabled on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.10
rcIpConfAutoAggrerateEnable Used to indicate whether the auto aggregation feature should be enabled on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.11
rcIpConfGenerateDefaultRoute Used to indicate whether to generate a default RIP route on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.12
rcIpConfAdvertiseWhenDown The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used for single routable ports, in that case the criteria for state…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.13
rcIpConfDirectBroadcastEnable Used to indicate whether this interface should forward direct broadcast traffic	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.14
rcIpConfRipInPolicy Used to indicate whether this interface should advertize a RIP default route.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.1.1.1.15
rcIpConfRipOutPolicy Used to indicate whether this interface should accept a RIP default route.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.1.1.1.16
rcIpConfOspfIfType OSPF Interface Type.	Enumerationr/w Enumerated Values: 1 broadcast 2 nbma 3 pointToPoint 5 pointToMultipoint 99 passive	.1.3.6.1.4.1.2272.1.8.1.1.1.17
rcIpConfRipCost Used to indicate the rip cost for this interface.	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.2272.1.8.1.1.1.18
rcIpConfRipHolddown Used to indicate the rip holddown timer for this interface	Integer32r/w Constraints: range: 0-360	.1.3.6.1.4.1.2272.1.8.1.1.1.19
rcIpConfRipTimeout Used to indicate the rip timeout interval for this interface	Integer32r/w Constraints: range: 15-259200	.1.3.6.1.4.1.2272.1.8.1.1.1.20
rcIpConfRsmltEnable Used to enable Route Smlt feature.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.21
rcIpConfReversePathCheckEnable Used to indicate whether this interface should perform Reverse Path Check	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.22
rcIpConfReversePathCheckMode Reverse Path Checking mode.	Enumerationr/w Enumerated Values: 1 exist-only 2 strict	.1.3.6.1.4.1.2272.1.8.1.1.1.23
rcIpConfIsisEnable Enable/disable Isis on this IP interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.24
rcIpConfBfdEnable Enable or disable BFD on the specified interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.25
rcIpConfIpVpnLiteEnable Enable or disable ipvpn-lite capability on the specified circuitless ip interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.26
rcIpConfSpbMulticastEnable Enable or disable spb-multicast on this port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.27
rcIpConfSpbMulticastQuerierAddr querier-addr for spb-multicast	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.1.1.1.28
rcIpConfVrrpVersion Set the VRRP version for IPv4 on the specified interface. It does not impact the use of IPv6 VRRPv3	Enumerationr/w Enumerated Values: 1 unspecified 2 v2 3 v3	.1.3.6.1.4.1.2272.1.8.1.1.1.29
rcIpConfPimGatewayEnable Enable/disable PIM Gateway on this interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.30
rcIpConfVrrpChkSumComputation Set the IPv4 VRRPv3 checksum computation method on the specified interface.	Enumerationr/w Enumerated Values: 1 withPseudoHeader 2 withoutPseudoHeader	.1.3.6.1.4.1.2272.1.8.1.1.1.31
rcIpConfIpsecEnable Used to indicate whether IPSec is enabled or disabled on the interface	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.32

A table used to maintain OSPF summary route
metric parameter for a particular Area range.

rcIpConfRsmltEntry row .1.3.6.1.4.1.2272.1.8.1.11.1

Entry containing OSPF summary route metric
parameter for a particular Area range.
An entry is automatically created in this
table when an area range is configured through
ospfAreaAggregateTable in rfc1850rcc.mib

Indexes

rcIpConfRsmltIfIndex

Column	Syntax	OID
rcIpConfRsmltIfIndex Interface Index, this is an index of the table.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.8.1.11.1.1
rcIpConfRsmltHoldDownTimer Timer value, the range of value is from 0 to 3600.	Integer32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.2272.1.8.1.11.1.2
rcIpConfRsmltHoldUpTimer The range of value 0 to 3600 or 9999. 9999 means infinity.	Integer32r/w Constraints: range: 0-3600 range: 9999-9999	.1.3.6.1.4.1.2272.1.8.1.11.1.3
rcIpConfRsmltRowStatus Row Status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.1.11.1.4

BFD configuration table

rcIpConfBfdEntry row .1.3.6.1.4.1.2272.1.8.1.12.1

Used to configure BFD on a particular interface. An
entry is created automatically when the variable
rcIpConfBfdEnable is set to TRUE.
Once created this entry will only be deleted if the
rcIpConfBfdRowStatus is set to …

Indexes

rcIpConfBfdIfIndex

Column	Syntax	OID
rcIpConfBfdIfIndex Interface number. The number can represent either a physical or logical(VLAN) interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.8.1.12.1.1
rcIpConfBfdMinRxInterval the min rx interval in milliseconds	Integer32r/w Constraints: range: 100-65535	.1.3.6.1.4.1.2272.1.8.1.12.1.2
rcIpConfBfdTxInterval the desired tx interval in milliseconds	Integer32r/w Constraints: range: 100-65535	.1.3.6.1.4.1.2272.1.8.1.12.1.3
rcIpConfBfdMultiplier the multiplier BFD wait before rx timeout	Integer32r/w Constraints: range: 1-20	.1.3.6.1.4.1.2272.1.8.1.12.1.4
rcIpConfBfdRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.1.12.1.5
rcIpConfBfdHoldOffInterval This object specifies the hold off timer interval, in seconds. 0 means that hold off timer is disabled.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.1.12.1.6
rcIpConfBfdStaticFlag This object specifies the static-flag for bfd. When disabled, the static route will go down, when bfd is disabled	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.1.12.1.7
rcIpConfBfdVrfId Indicates the Virtual Router to which the IPv4 BFD instance belongs.	RC-VRF-MIBVrfIdentifierr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.1.12.1.8
rcIpConfBfdVrfName The Name of the Virtual Router to which the IPv4 BFD instance belongs.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.8.1.12.1.9

The table of addressing information relevant to
this entity's IP addresses.
          
This table is identical to the ipAddrTable in
MIB2 except the columns rcIpAdEntIfIndex and
rcIpAdEntAddr are reversed.  Also, the table
is indexed by both these variables.

rcIpAddrEntry row .1.3.6.1.4.1.2272.1.8.2.1

The addressing information for one of this
entity's IP addresses.

Indexes

rcIpAdEntIfIndex rcIpAdEntAddr

Column	Syntax	OID
rcIpAdEntIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.8.2.1.1
rcIpAdEntAddr The IP address to which this entry's addressing information pertains.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.2.1.2
rcIpAdEntNetMask The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.2.1.3
rcIpAdEntBcastAddrFormat The IP broadcast address format used on this interface.	Enumeration Enumerated Values: 0 zeros 1 ones	.1.3.6.1.4.1.2272.1.8.2.1.4
rcIpAdEntReasmMaxSize The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.2.1.5
rcIpAdEntRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.2.1.6
rcIpAdEntVlanId A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.	Integer32r/w Constraints: range: 0-4096	.1.3.6.1.4.1.2272.1.8.2.1.7
rcIpAdEntBrouterPort Used to indicate whether this entry correponds to a brouter port (as oppose to a routable VLAN). This value cannot be changed after the row is created.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.2.1.8
rcIpAdEntMacOffset Used to translate the ip address into mac address. The system has 512 mac addresses of which 0-507 are reserved for Boardwalk box. 508-511 is reserved for MG. One can either mention a mac offset while configuring an ip …	Integer32r/w Constraints: range: 0-511	.1.3.6.1.4.1.2272.1.8.2.1.9
rcIpAdEntIfType The address entry IfType indicates the type of the interface. In the case of circuit-less-IP there is no association with any ports. In other words, it can be thought of as a virtual interface. The value 'brouter port' …	Enumeration Enumerated Values: 1 circuitLessIP 2 brouterPort 3 vlan 4 mgmtOob 5 mgmtClip 6 mgmtVlan	.1.3.6.1.4.1.2272.1.8.2.1.10
rcIpAdEntSecondaryIf Used to indicate whether this entry correponds to a secondary interface (as oppose to a primary interface). This value cannot be changed after the row is created.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.2.1.11
rcIpAdEntVrfId The VrfId used in this table is to associate VLANs or Brouter ports to a VRF after the creation of VLANs or Brouter ports. VRFID 0 is reserved for the Administrative VRF.	RC-VRF-MIBVrfIdentifierr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.2.1.12
rcIpAdEntName The administratively assigned name for this address	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.2.1.13

IpFlow Table.  This table contain entries that
correspond to RSVP records in the switching
fabric Address Resolution table.
          
A connection that has a matching entry in this
table will be processed with a higher priority
than connections that do not have an entry.

rcIpFlowEntry row .1.3.6.1.4.1.2272.1.8.3.1

Proprietary flow control variables.

Indexes

rcIpFlowSrcIpAddress rcIpFlowSrcIpPort rcIpFlowDstIpAddress rcIpFlowDstIpPort rcIpFlowProtocol

Column	Syntax	OID
rcIpFlowSrcIpAddress The source IP address of an IP packet.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.3.1.1
rcIpFlowSrcIpPort The source port of an IP packet. A zero value in this field is used as a wildcard value.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.3.1.2
rcIpFlowDstIpAddress The destination IP address of an IP packet.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.3.1.3
rcIpFlowDstIpPort The destination port of an IP packet. A zero value in this field is used as a wildcard value.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.3.1.4
rcIpFlowProtocol The protocol type of an IP packet. A zero value in this field is used as a wildcard value.	Enumeration Enumerated Values: 4 ip 6 tcp 17 udp	.1.3.6.1.4.1.2272.1.8.3.1.5
rcIpFlowRowStatus Status of entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.3.1.6

DHCP configuration table

rcIpConfDhcpEntry row .1.3.6.1.4.1.2272.1.8.8.1

Used to configure DHCP on a particular port. An
entry is created automatically when the variable
rcIpConfDhcpEnable is set to TRUE.

Once created this entry will only be deleted if the
rcIpConfDhcpRowStatus…

Indexes

rcIpConfDhcpIfIndex

Column	Syntax	OID
rcIpConfDhcpIfIndex Interface number. The number can represent either a physical or logical(VLAN) interface.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2272.1.8.8.1.1
rcIpConfDhcpMaxHop Used to indicate the maximum number of hops a DHCP packet can take from the source device to the destination device (i.e., DHCP client to DHCP server).	Integer32r/w Constraints: range: 1-16	.1.3.6.1.4.1.2272.1.8.8.1.2
rcIpConfDhcpMinSec Used to indicate the minimum number of seconds to wait between receiving a DHCP packet and actually forwarding the DHCP packet to the destination device. A value of zero(0) indicates forwarding should be done immediate…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.8.1.3
rcIpConfDhcpMode Used to indicate what type of DHCP packets this interface should support. A value of none(1) will result in all incoming DHCP and BOOTP packets to be dropped.	Enumerationr/w Enumerated Values: 0 none 2 bootp 3 dhcp 4 both	.1.3.6.1.4.1.2272.1.8.8.1.4
rcIpConfDhcpRowStatus An entry is created automatically when the variable rcIpConfDhcpEnable is set to TRUE. Once created this entry will only be deleted if the rcIpConfDhcpRowStatus is set to 'destroy(6)'. In which case, the…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.8.1.5
rcIpConfDhcpNumRequests The total number of DHCP requests seen on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.8.1.6
rcIpConfDhcpNumReplies The total number of DHCP replies seen on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.8.1.7
rcIpConfDhcpAlwaysBroadcast Used to indicate if DHCP Reply packets should be broadcast to the DHCP client on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.8.1.8
rcIpConfDhcpClearCounters This object is used to clear the DHCP counters in an entry. When set to clear(1), the values of the counter objects in the entry will be reset to 0, and the value of rcIpConfDhcpCounterClearTime will be set to the curr…	Enumerationr/w Enumerated Values: 1 clear 2 dummy	.1.3.6.1.4.1.2272.1.8.8.1.9
rcIpConfDhcpCounterClearTime This object indicates the time at which the counter values in this entry were last reset to 0.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.2272.1.8.8.1.10
rcIpConfDhcpCircuitId Used to indicate if DHCP packets should have option82 circuitId info inserted before sent to servers, for this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.8.1.11
rcIpConfDhcpRemoteId Used to indicate if DHCP packets should have option82 remoteId info inserted before sent to servers, for this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.8.1.12
rcIpConfDhcpTrusted Used to indicate if DHCP packets come through a trusted dhcp circuit. This means that packets with giaddr set to 0 having option82 in it, will be forwarded if the circuit is trusted.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.8.1.13
rcIpConfDhcpAgentAddr The IP address configured as relay on this interface; it is either the IP of the physical interface or the IP of the VRRP address	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.8.1.14

DHCP forwarding table.

rcIpDhcpForwardEntry row .1.3.6.1.4.1.2272.1.8.9.1

An entry used represents a DHCP forwarding directive.

Indexes

rcIpDhcpForwardAgentAddr rcIpDhcpForwardServerAddr

Column	Syntax	OID
rcIpDhcpForwardAgentAddr The IP address configured on an interface (i.e., a locally configured IP address).	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.9.1.1
rcIpDhcpForwardServerAddr The IP address of the DHCP server. If this IP address corresponds to a locally configured IP network, the DHCP packet is broadcasted out the interface the IP address is assigned to. This behavior is known as 'relay age…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.9.1.2
rcIpDhcpForwardEnable Used to indicate whether is entry should be used.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.9.1.3
rcIpDhcpForwardMode Used to indicate whether this entry pertains to BOOTP packets, DHCP packets, or both.	Enumerationr/w Enumerated Values: 0 none 2 bootp 3 dhcp 4 both	.1.3.6.1.4.1.2272.1.8.9.1.4
rcIpDhcpForwardRowStatus Row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.9.1.5

A table used to maintain ICMP Route discovery information
for a particular interface.

rcIpConfIcmpRdiscEntry row .1.3.6.1.4.1.2272.1.8.22.1

Entry containing ICMP Rdisc information. An entry is
automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.

Indexes

rcIpConfIcmpRdiscIfIndex

Column	Syntax	OID
rcIpConfIcmpRdiscIfIndex An unique value to identify a physical interface or a logical interface (VLAN).	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.22.1.1
rcIpConfIcmpRdiscAdvAddress Advertisement address to which the route discovery advertisements transmitted on this interface.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.22.1.2
rcIpConfIcmpRdiscAdvFlag Flag to indicate whether or not the address is to be advertised on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.22.1.3
rcIpConfIcmpRdiscAdvLifetime The value to be placed in the lifetime field of Router Advertisements sent from the interface.	Integer32r/w Constraints: range: 4-9000	.1.3.6.1.4.1.2272.1.8.22.1.4
rcIpConfIcmpRdiscMaxAdvInterval The maximum time allowed between sending Router Advertisements from this interface.	Integer32r/w Constraints: range: 4-1800	.1.3.6.1.4.1.2272.1.8.22.1.5
rcIpConfIcmpRdiscMinAdvInterval The minimum time allowed between sending Router Advertisements from this interface.	Integer32r/w Constraints: range: 3-1800	.1.3.6.1.4.1.2272.1.8.22.1.6
rcIpConfIcmpRdiscPreferenceLevel Preferability of the router address as a default Router	Integer32r/w Constraints: range: -2147483648-2147483647	.1.3.6.1.4.1.2272.1.8.22.1.7

Route Smlt Table

rcIpRsmltOperEntry row .1.3.6.1.4.1.2272.1.8.26.2.1

An entry of Ip As Path Access List Table.

Indexes

rcIpRsmltOperIfIndex

Column	Syntax	OID
rcIpRsmltOperIfIndex Route Smlt Oper IfIndex.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.8.26.2.1.1
rcIpRsmltOperAdminStatus is a enable/disable flag.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.2.1.2
rcIpRsmltOperHoldDownTimer Timer value, the range of value is from 0 to 3600.	Integer32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.2272.1.8.26.2.1.3
rcIpRsmltOperHoldDownTimeRemaining The time value that indicate how much time remaining of HoldDownTimer.	Integer32 Constraints: range: 0-3600	.1.3.6.1.4.1.2272.1.8.26.2.1.4
rcIpRsmltOperHoldUpTimer The range of value 0 to 3600 or 9999. 9999 means infinity.	Integer32r/w Constraints: range: 0-3600 range: 9999-9999	.1.3.6.1.4.1.2272.1.8.26.2.1.5
rcIpRsmltOperHoldUpTimeRemaining The time value that indicate how much time remaining of HoldUpTimer.	Integer32 Constraints: range: 0-3600 range: 9999-9999	.1.3.6.1.4.1.2272.1.8.26.2.1.6
rcIpRsmltOperIpAddr IP Interface with RSMLT on.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.26.2.1.7
rcIpRsmltOperOperStatus The operation status of Rsmlt, up or down.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.8.26.2.1.8
rcIpRsmltOperSmltId The id range for SMLT is 1-32.	RAPID-CITYIdList	.1.3.6.1.4.1.2272.1.8.26.2.1.9
rcIpRsmltOperSltId The id range for SLT is 1-512.	RAPID-CITYIdList	.1.3.6.1.4.1.2272.1.8.26.2.1.10
rcIpRsmltOperVlanId Vlan id.	Integer32 Constraints: range: 1-4093	.1.3.6.1.4.1.2272.1.8.26.2.1.11
rcIpRsmltOperMacAddr Mac Address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.26.2.1.12
rcIpRsmltOperRowStatus Row Status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.26.2.1.13
rcIpRsmltOperVrfId Indicates the Virtual Router to which the RSMLT Oper instance belongs.	RC-VRF-MIBVrfIdentifier Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.26.2.1.14
rcIpRsmltOperVrfName Name of the Virtual Router to which the RSMLT Oper instance belongs.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.26.2.1.15

Route Smlt Table

rcIpRsmltPeerEntry row .1.3.6.1.4.1.2272.1.8.26.3.1

An entry of Ip As Path Access List Table.

Indexes

rcIpRsmltPeerIfIndex

Column	Syntax	OID
rcIpRsmltPeerIfIndex Route Smlt Oper IfIndex.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.8.26.3.1.1
rcIpRsmltPeerAdminStatus is a enable/disable flag.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.26.3.1.2
rcIpRsmltPeerHoldDownTimer Timer value, the range of value is from 0 to 3600.	Integer32 Constraints: range: 0-3600	.1.3.6.1.4.1.2272.1.8.26.3.1.3
rcIpRsmltPeerHoldDownTimeRemaining The time value that indicate how much time remaining of HoldDownTimer.	Integer32 Constraints: range: 0-3600	.1.3.6.1.4.1.2272.1.8.26.3.1.4
rcIpRsmltPeerHoldUpTimer The range of value 0 to 3600 or 9999. 9999 means infinity.	Integer32 Constraints: range: 0-3600 range: 9999-9999	.1.3.6.1.4.1.2272.1.8.26.3.1.5
rcIpRsmltPeerHoldUpTimeRemaining The time value that indicate how much time remaining of HoldUpTimer.	Integer32 Constraints: range: 0-3600 range: 9999-9999	.1.3.6.1.4.1.2272.1.8.26.3.1.6
rcIpRsmltPeerIpAddr IP Interface with RSMLT on.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.26.3.1.7
rcIpRsmltPeerOperStatus The operation status of Rsmlt, up or down.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.8.26.3.1.8
rcIpRsmltPeerSmltId The id range for SMLT is 1-32.	RAPID-CITYIdList	.1.3.6.1.4.1.2272.1.8.26.3.1.9
rcIpRsmltPeerSltId The id range for SLT is 1-512.	RAPID-CITYIdList	.1.3.6.1.4.1.2272.1.8.26.3.1.10
rcIpRsmltPeerVlanId Vlan id.	Integer32 Constraints: range: 1-4093	.1.3.6.1.4.1.2272.1.8.26.3.1.11
rcIpRsmltPeerMacAddr Mac Address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.26.3.1.12
rcIpRsmltPeerVrfId Indicates the Virtual Router to which the RSMLT Peer instance belongs.	RC-VRF-MIBVrfIdentifier Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.26.3.1.13
rcIpRsmltPeerVrfName Name of the Virtual Router to which the RSMLT Peer instance belongs.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.26.3.1.14

RSMLT Edge Support Peer Info table. This 
table consists of the RSMLT Peers for which 
the switch will act as a PeerForwarder.

rcIpRsmltEdgePeerEntry row .1.3.6.1.4.1.2272.1.8.26.4.1

RSMLT Edge Support Peer Info Entry

Indexes

rcIpRsmltEdgeVlanId

Column	Syntax	OID
rcIpRsmltEdgeVlanId A value that uniquely identifies the Virtual LAN associated with this entry.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.8.26.4.1.1
rcIpRsmltEdgePeerIpAddress IP address of the Peer RSMLT Interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.26.4.1.2
rcIpRsmltEdgePeerMacAddress The MAC address of the Peer RSMLT interface.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.26.4.1.3
rcIpRsmltEdgePeerVrfId Indicates the Virtual Router to which the RSMLT Edge Peer instance belongs.	RC-VRF-MIBVrfIdentifier Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.26.4.1.4
rcIpRsmltEdgePeerVrfName Name of the Virtual Router to which the RSMLT Edge Peer instance belongs.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.26.4.1.5

DHCP statistics table for Relay Agent Information Option

rcIpDhcpOp82StatsEntry row .1.3.6.1.4.1.2272.1.8.29.1

Used to see current statistics on interfaces that have
DHCP Option 82 (Relay Agent Information) enabled.
This table is read-only.

Indexes

rcIpDhcpOp82StatsIfIndex

Column	Syntax	OID
rcIpDhcpOp82StatsIfIndex Interface number. The number can represent either a physical or logical(VLAN) interface.	Integer32 Constraints: range: 0-6142	.1.3.6.1.4.1.2272.1.8.29.1.1
rcIpDhcpOp82StatsFoundOp82 Represents the number of packets received on the interface that already had Dhcp Option 82 inserted in them	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.29.1.2
rcIpDhcpOp82StatsDropped Represents the number of packets dropped because of reasons related to Dhcp Option 82. These reasons could be that the packet was received from an untrusted source or spoofing was detected.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.29.1.3
rcIpDhcpOp82StatsCircuitId Represents the value of CircuitId inserted in the packets. This is the Port number of the Dhcp Relay.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.29.1.4
rcIpDhcpOp82StatsAddedCircuitId Represents the number of packets which had CircuitId inserted on this interface	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.29.1.5
rcIpDhcpOp82StatsRemovedCircuitId Represents the number of packets which had CircuitId removed on this interface	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.29.1.6
rcIpDhcpOp82StatsRemoteId Represents the value of RemoteId inserted in the packets. This is the Mac address of the Dhcp Relay.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.29.1.7
rcIpDhcpOp82StatsAddedRemoteId Represents the number of packets which had RemoteId inserted on this interface	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.29.1.8
rcIpDhcpOp82StatsRemovedRemoteId Represents the number of packets which had RemoteId removed on this interface	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.29.1.9
rcIpDhcpOp82StatsAgentAddr The IP address configured as relay on this interface; it is either the IP of the physical interface or the IP of the VRRP address	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.29.1.10

The IP Address Translation table used for mapping 
from IP addresses to physical addresses.

rcIpNetToMediaEntry row .1.3.6.1.4.1.2272.1.8.30.1

Each entry contains one IpAddress to `physical'
address equivalence.

Indexes

rcIpNetToMediaNetAddress rcIpNetToMediaIfIndex

Column	Syntax	OID
rcIpNetToMediaNetAddress The IpAddress corresponding to the media- dependent `physical' address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.30.1.1
rcIpNetToMediaIfIndex The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.8.30.1.2
rcIpNetToMediaPhysAddress The media-dependent `physical' address.	SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.2272.1.8.30.1.3
rcIpNetToMediaType The is ARP entry type field.	Enumeration Enumerated Values: 1 other 2 dynamic 3 static 4 local	.1.3.6.1.4.1.2272.1.8.30.1.4
rcIpNetToMediaTimeToLive This is TTL (time to live) field.	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.30.1.5
rcIpNetToMediaRowStatus Table row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.30.1.6
rcIpNetToMediaDestIfIndex Destination IfIndex.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.8.30.1.7
rcIpNetToMediaDestVlanId Destination VlanId.	Integer32r/w Constraints: range: 0-4084	.1.3.6.1.4.1.2272.1.8.30.1.8
rcIpNetToMediaBMac If the rcIpNetToMediaEntry is learned from a SPBM network, instead of using port to track where the rcIpNetToMediaNetAddress come from, the backbone MAC address is used to track that.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.30.1.9
rcIpNetToMediaDestCvid Used to identify customer vid of the switched uni port of this entry is associated with. 4095 is not used. 4096 is reserved for untagged case.	Integer32 Constraints: range: 1-4096	.1.3.6.1.4.1.2272.1.8.30.1.10

Table required to configure mvpn

rcIpMvpnTableEntry row .1.3.6.1.4.1.2272.1.8.31.1

Entries in this table are per rcVrfId.

Indexes

rcIpMvpnVrfId

Column	Syntax	OID
rcIpMvpnVrfId The VrfId serves as the Index for rcVrfIpMvpnTableEntry	RC-VRF-MIBVrfIdentifier Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.31.1.1
rcIpMvpnEnable The status of mvpn on a vrf.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.31.1.2
rcIpMvpnFwdCacheTimeout Mvpn Fwd Cache Timeout in seconds	Integer32r/w Constraints: range: 10-86400	.1.3.6.1.4.1.2272.1.8.31.1.3

Table used to clear an IP ARP Record.

rcIPClearArpRecordEntry row .1.3.6.1.4.1.2272.1.8.107.1

IP Clear ARP Record Table Entry

Indexes

rcIPClearArpRecordIpAddr rcIPClearArpRecordVlanId

Column	Syntax	OID
rcIPClearArpRecordIpAddr IP Address that needs to be cleared.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.107.1.1
rcIPClearArpRecordVlanId Vlan Id where the ARP record has to be cleared.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.8.107.1.2
rcIPClearArpRecordLCForceDelete By default, when LCForceDelete (Line Card Force Delete) is set to false, if the ARP record is not found on the CP, then no message will be sent to the line-card. When LCForceDelete is set to true, a message will be …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.107.1.3

Table used to clear an IP MC Record.

rcIPClearIPMCRecordEntry row .1.3.6.1.4.1.2272.1.8.108.1

IP Clear IP MC Record Table Entry

Indexes

rcIPClearIPMCRecordGroup rcIPClearIPMCRecordVlanId

Column	Syntax	OID
rcIPClearIPMCRecordGroup The IP Multicast Group Address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.108.1.1
rcIPClearIPMCRecordVlanId Vlan Id where the IP MC record has to be cleared.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.8.108.1.2
rcIPClearIPMCRecordSource The Source IP Address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.108.1.3
rcIPClearIPMCRecordLCForceDelete By default, when LCForceDelete (Line Card Force Delete) is set to false, if the IP MC record is not found on the CP, then no message will be sent to the line-card. When LCForceDelete is set to true, a message will …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.108.1.4

IP Isis In Filter Nick Name table

rcIpIsisInFilterNickNameEntry row .1.3.6.1.4.1.2272.1.8.110.2.1.1

An entry of Ip Isis In Filter Nick Name Table.

Indexes

rcIpIsisInFilterNickNameAdvertisingRtr

Column	Syntax	OID
rcIpIsisInFilterNickNameAdvertisingRtr NickName used to filter by	IpIsisPlsbNodeNickName Type Constraints: range: 3	.1.3.6.1.4.1.2272.1.8.110.2.1.1.1
rcIpIsisInFilterNickNameEnable Enables or disables the NickName entry. The value must be enabled to filter.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.110.2.1.1.2
rcIpIsisInFilterNickNamePolicyName Route Map name used	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.110.2.1.1.3
rcIpIsisInFilterNickNameRowStatus Ip Isis In Filter Nick Name Table Row Status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.110.2.1.1.4
rcIpIsisInFilterNickNameBackBonePolicyName Backbone Route Map name	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.110.2.1.1.5

IP Isis In Filter Isid Isid table

rcIpIsisInFilterIsidEntry row .1.3.6.1.4.1.2272.1.8.110.2.2.1

An entry of Ip Isis In Filter Table.

Indexes

rcIpIsisInFilterIsid

Column	Syntax	OID
rcIpIsisInFilterIsid Isid value used to filter by. The value 0 is used for Global Router.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.8.110.2.2.1.1
rcIpIsisInFilterIsidEnable Enables or disables the Isid entry. The value must be enabled to filter.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.110.2.2.1.2
rcIpIsisInFilterIsidPolicyName Route Map name used	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.110.2.2.1.3
rcIpIsisInFilterIsidRowStatus Ip Isis In Filter Isid Table Row Status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.110.2.2.1.4
rcIpIsisInFilterIsidBackbonePolicyName Backbone Route Map name	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.110.2.2.1.5

IP Isis In Filter Nick Name Isid table

rcIpIsisInFilterNickNameIsidEntry row .1.3.6.1.4.1.2272.1.8.110.2.3.1

An entry of Ip Isis In Filter Nick Name Isid Table.

Indexes

rcIpIsisInFilterNickNameIsidAdvertisingRtr rcIpIsisInFilterNickNameIsid

Column	Syntax	OID
rcIpIsisInFilterNickNameIsidAdvertisingRtr NickName used to filter by	IpIsisPlsbNodeNickName Type Constraints: range: 3	.1.3.6.1.4.1.2272.1.8.110.2.3.1.1
rcIpIsisInFilterNickNameIsid Isid used to filter by. The value 0 is used for Global Router.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.8.110.2.3.1.2
rcIpIsisInFilterNickNameIsidEnable	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.110.2.3.1.3
rcIpIsisInFilterNickNameIsidPolicyName Route Map name used	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.110.2.3.1.4
rcIpIsisInFilterNickNameIsidRowStatus Ip Isis In Filter Nick Name Isid Table Row Status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.110.2.3.1.5
rcIpIsisInFilterNickNameIsidBackBonePolicyName Backbone Route Map name	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.110.2.3.1.6

IP Isis Isid List table

rcIpIsisIsidListEntry row .1.3.6.1.4.1.2272.1.8.110.2.4.1

An entry of Ip Isis Isid List Table.

Indexes

rcIpIsisIsidListName rcIpIsisIsidListIsid

Column	Syntax	OID
rcIpIsisIsidListName Name of Isid List	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.8.110.2.4.1.1
rcIpIsisIsidListIsid Is a member of the specified isid list. The value is the i-sid integer value or the value 0 is used for Global Router.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.8.110.2.4.1.2
rcIpIsisIsidListRowStatus Row Status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.110.2.4.1.3

IP Isis In Filter Isid List table

rcIpIsisInFilterIsidListEntry row .1.3.6.1.4.1.2272.1.8.110.2.5.1

An entry of Ip Isis In Filter Table.

Indexes

rcIpIsisInFilterIsidListName

Column	Syntax	OID
rcIpIsisInFilterIsidListName Name of Isid List	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.8.110.2.5.1.1
rcIpIsisInFilterIsidListEnable Enables or disables the Isid List entry. The value must be enabled to filter.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.110.2.5.1.2
rcIpIsisInFilterIsidListPolicyName Route Map name	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.110.2.5.1.3
rcIpIsisInFilterIsidListRowStatus Ip Isis In Filter Isid List Table Row Status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.110.2.5.1.4
rcIpIsisInFilterIsidListBackBonePolicyName Backbone Route Map name	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.110.2.5.1.5

IP Isis In Filter Nick Name Isid List table

rcIpIsisInFilterNickNameIsidListEntry row .1.3.6.1.4.1.2272.1.8.110.2.6.1

An entry of Ip Isis In Filter Nick Name Isid ListTable

Indexes

rcIpIsisInFilterNickNameIsidListAdvertisingRtr rcIpIsisInFilterNickNameIsidListName

Column	Syntax	OID
rcIpIsisInFilterNickNameIsidListAdvertisingRtr NickName used to filter by	IpIsisPlsbNodeNickName Type Constraints: range: 3	.1.3.6.1.4.1.2272.1.8.110.2.6.1.1
rcIpIsisInFilterNickNameIsidListName Name of Isid List used to filter	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.8.110.2.6.1.2
rcIpIsisInFilterNickNameIsidListEnable Enables or disables the NickName IsidList entry. The value must be enabled to filter.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.110.2.6.1.3
rcIpIsisInFilterNickNameIsidListPolicyName Route Map name	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.110.2.6.1.4
rcIpIsisInFilterNickNameIsidListRowStatus Ip Isis In Filter Nick Name Isid List Table Row Status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.110.2.6.1.5
rcIpIsisInFilterNickNameIsidListBackBonePolicyName Backbone Route Map name	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.110.2.6.1.6

IP PIM Gateway table

rcIpSpbPimGwInterfaceEntry row .1.3.6.1.4.1.2272.1.8.114.2.1

An entry of Ip Pim Gateway Interface Table.

Indexes

rcIpSpbPimGwInterfaceIfIndex

Column	Syntax	OID
rcIpSpbPimGwInterfaceIfIndex port	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.8.114.2.1.1
rcIpSpbPimGwInterfaceOperState The current operational state of this PIM-gw interface.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.8.114.2.1.2
rcIpSpbPimGwInterfaceAddressType The address type of this PIM-gw interface.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.8.114.2.1.3
rcIpSpbPimGwInterfaceAddress The primary IP address of this router on this PIM-gw interface. The InetAddressType is given by the rcIpSpbPimGwInterfaceAddressType object.	OctetString Constraints: range: 0-0 range: 4-4 range: 8-8 range: 16-16 range: 20-20	.1.3.6.1.4.1.2272.1.8.114.2.1.4
rcIpSpbPimGwInterfaceAddressMask The primary IP address mask of this router on this PIM-gw interface.	OctetString Constraints: range: 0-0 range: 4-4 range: 8-8 range: 16-16 range: 20-20	.1.3.6.1.4.1.2272.1.8.114.2.1.5
rcIpSpbPimGwInterfaceHelloInterval PIM Hello transmission interval. The PIM-GW VLAN inherits this value. The PIM-gw VLAN level setting will override this.Setting Hello interval to 0 will cause PIM neighborship never to expire.	Integer32r/w Constraints: range: 0-18724	.1.3.6.1.4.1.2272.1.8.114.2.1.6
rcIpSpbPimGwInterfaceJoinPruneInterval PIM Join/Prune transmission interval. The PIM-GW VLAN inherits this value. The PIM-gw VLAN level setting will override this.	Integer32r/w Constraints: range: 1-18724	.1.3.6.1.4.1.2272.1.8.114.2.1.7

The PIM-gw neighbor Table

rcIpSpbPimGwNeighborEntry row .1.3.6.1.4.1.2272.1.8.114.3.1

An entry (conceptual row) in the pimNeighborTable.

Indexes

rcIpSpbPimGwNeighborIfIndex rcIpSpbPimGwNeighborAddressType rcIpSpbPimGwNeighborAddress

Column	Syntax	OID
rcIpSpbPimGwNeighborIfIndex The value of ifIndex for the interface used to reach this PIM-gw neighbor.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.8.114.3.1.1
rcIpSpbPimGwNeighborAddressType The address type of this PIM-gw neighbor.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.8.114.3.1.2
rcIpSpbPimGwNeighborAddress The primary IP address of this PIM-gw neighbor. The InetAddressType is given by the rcIpSpbPimGwNeighborAddressType object.	OctetString Constraints: range: 4-4 range: 8-8 range: 16-16 range: 20-20	.1.3.6.1.4.1.2272.1.8.114.3.1.3
rcIpSpbPimGwNeighborUpTime The time since this PIM-gw neighbor (last) became a neighbor of the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.114.3.1.4
rcIpSpbPimGwNeighborExpiryTime The minimum time remaining before this PIM-gw neighbor will time out.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.8.114.3.1.5

IP Multicast foreign source table from Pim-gw controller.
This is table of IP multicast sources from non-SPBM domain.

rcIpSpbPimGwControllerForeignSrcEntry row .1.3.6.1.4.1.2272.1.8.114.4.1

An entry of IP multicast foreign source.

Indexes

rcIpSpbPimGwControllerForeignSrcSourceAddress rcIpSpbPimGwControllerForeignSrcGroupAddress

Column	Syntax	OID
rcIpSpbPimGwControllerForeignSrcSourceAddress The source IP address from non-SPBM multicast domain.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.114.4.1.1
rcIpSpbPimGwControllerForeignSrcGroupAddress Multicast group IP address associated with the foreign source.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.114.4.1.2
rcIpSpbPimGwControllerForeignSrcRowStatus Used to create/delete entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.114.4.1.3
rcIpSpbPimGwControllerForeignSrcGatewaySysId System ID of the node selected as the gateway for this foreing source. This object has valid value if the source has a gateway assigned. If the source is not assigned a gateway, this object will have all 0's.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.8.114.4.1.4
rcIpSpbPimGwControllerForeignSrcGatewayHostName Host name of the node selected as the gateway for this foreign source. This object has valid value if the source has a gateway assigned. If the source is not assigned a gateway, this object will have all 0's.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.114.4.1.5
rcIpSpbPimGwControllerForeignSrcType The type of the owner of this source.	Enumeration Enumerated Values: 1 none 2 msdp 3 static	.1.3.6.1.4.1.2272.1.8.114.4.1.6
rcIpSpbPimGwControllerForeignSrcOwner The IP address of the MSDP peer if the foreign source type (rcIpSpbPimGwControllerForeignSrcType) is MSDP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.114.4.1.7

SPB Multicast source table from SPB PIM GW controller.
This table is for all SPBM sources distributed to MSDP.

rcIpSpbPimGwControllerSpbmcSrcEntry row .1.3.6.1.4.1.2272.1.8.114.5.1

An entry of SPBMC source sent to MSDP.

Indexes

rcIpSpbPimGwControllerSpbmcSrcSourceAddress rcIpSpbPimGwControllerSpbmcSrcGroupAddress

Column	Syntax	OID
rcIpSpbPimGwControllerSpbmcSrcSourceAddress The source IP address from SPBM multicast domain.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.114.5.1.1
rcIpSpbPimGwControllerSpbmcSrcGroupAddress Multicast group IP address associated with the SPBMC source.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.114.5.1.2
rcIpSpbPimGwControllerSpbmcSrcOriginatorSysId System ID of the node to which the source is attached to.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.8.114.5.1.3
rcIpSpbPimGwControllerSpbmcSrcOriginatorHostName Host name of the node to which the source is attached to.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.114.5.1.4

IP Multicast foreign source table from SPB PIM GW gateway.

rcIpSpbPimGwGatewayForeignSrcEntry row .1.3.6.1.4.1.2272.1.8.114.6.1

An entry of IP multicast foreign source.

Indexes

rcIpSpbPimGwGatewayForeignSrcSourceAddress rcIpSpbPimGwGatewayForeignSrcGroupAddress rcIpSpbPimGwGatewayForeignSrcControllerSysId

Column	Syntax	OID
rcIpSpbPimGwGatewayForeignSrcSourceAddress The source IP address foreign source entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.114.6.1.1
rcIpSpbPimGwGatewayForeignSrcGroupAddress Multicast group IP address associated with the foreign source.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.114.6.1.2
rcIpSpbPimGwGatewayForeignSrcControllerSysId System ID of the controller node (preferred controller) that sent this foreing source.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.8.114.6.1.3
rcIpSpbPimGwGatewayForeignSrcControllerHostName Host name of the controller node that sent this foreing source.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.114.6.1.4
rcIpSpbPimGwGatewayForeignSrcGatewaySysId System ID of the node selected as the gateway for this foreing source.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.2272.1.8.114.6.1.5
rcIpSpbPimGwGatewayForeignSrcGatewayHostName Host name of the node assigned as the gateway for this foreign source.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.114.6.1.6
rcIpSpbPimGwGatewayForeignSrcInVid The VLAN id of the PimGw interface through which the source of this source is reachable.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.2272.1.8.114.6.1.7
rcIpSpbPimGwGatewayForeignSrcInPort A unique value to identify a physical interce through which the source of this source is reachable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.8.114.6.1.8
rcIpSpbPimGwGatewayForeignSrcOwnerType This will specify the type of the owner - msdp - if the owner is MSDP static - otherwise	Enumeration Enumerated Values: 1 none 2 msdp 3 static	.1.3.6.1.4.1.2272.1.8.114.6.1.9

The PIM-gw node Table

rcIpSpbPimGwNodeEntry row .1.3.6.1.4.1.2272.1.8.114.7.1

An entry (conceptual row) in the pimNodeTable.

Indexes

rcIpSpbPimGwNodeMacAddress

Column	Syntax	OID
rcIpSpbPimGwNodeMacAddress The Max Address of the active node.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.8.114.7.1.1
rcIpSpbPimGwNodeHostName The Host name of the active node.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.114.7.1.2
rcIpSpbPimGwNodeRoleType The role type of the node. It is either Gateway, Controller or both.	Enumeration Enumerated Values: 1 controller 2 gateway 3 both	.1.3.6.1.4.1.2272.1.8.114.7.1.3

The (conceptual) table containing multicast routing
information for IP datagrams sent by particular sources to
 the IP multicast groups known to this router.

rcMRouteExtEntry row .1.3.6.1.4.1.2272.1.8.115.1.1

An entry (conceptual row) containing the multicast routing
information for IP datagrams from a particular source and
addressed to a particular IP multicast group address.

Indexes

No indexes recorded

Column	Syntax	OID
rcMRouteExtProtocol The routing mechanism via which this route was learned.	Enumeration Enumerated Values: 1 other 2 local 3 netmgmt 4 dvmrp 5 mospf 6 pimSparseDense 7 cbt 8 pimSparseMode 9 pimDenseMode 10 igmpOnly 11 pimSsmMode 12 spb 13 spbpimgw	.1.3.6.1.4.1.2272.1.8.115.1.1.1

The (conceptual) table containing information on the next
hops on outgoing interfaces for routing IP multicast
datagrams.  Each entry is one of a list of next hops on
outgoing interfaces for particular sources sending to a
particular multicast group address.

rcMRouteExtNextHopEntry row .1.3.6.1.4.1.2272.1.8.115.2.1

An entry (conceptual row) in the list of next hops on
outgoing interfaces to which IP multicast datagrams from
particular sources to a IP multicast group address are
routed.

Indexes

No indexes recorded

Column	Syntax	OID
rcMRouteExtNextHopProtocol The routing mechanism via which this next-hop was learned.	Enumeration Enumerated Values: 1 other 2 local 3 netmgmt 4 dvmrp 5 mospf 6 pimSparseDense 7 cbt 8 pimSparseMode 9 pimDenseMode 10 igmpOnly 11 pimSsmMode 12 spb 13 spbpimgw	.1.3.6.1.4.1.2272.1.8.115.2.1.1
rcMRouteExtNextHopL2Isid L2 ISID of the cvlan.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.8.115.2.1.2