RC-IKE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
86

rcIkeProfileTable

table
.1.3.6.1.4.1.2272.1.86.1 · 1 row entry · 8 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIkeProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IKE-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IKE-MIB::rcIkeProfileTable' 
This table contains a list of profiles 
consisting of algorithms and other 
configuration that can be used during an 
IKE Phase 1 connection.
rcIkeProfileEntry row .1.3.6.1.4.1.2272.1.86.1.1
An entry containing configuration information
for authentication algorithms, encryption
algorithms, Diffie-Helman group, exchange-mode
and lifetime-seconds to be used for a Phase 1
negotiation.
Indexes
Column Syntax OID
rcIkeProfileName
This object contains the name of this Profile.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.86.1.1.1
rcIkeProfileHashAlgorithm
This object specifies the hash algorithms
that can be used during IKE Phase 1 SA
negotiation.
Enumerationr/w
Enumerated Values:
1md5
2sha
4sha256
255any
 .1.3.6.1.4.1.2272.1.86.1.1.2
rcIkeProfileEncryptionAlgorithm
This object specifies the encryption
algorithms that can be used during IKE
Phase 1 SA negotiation.
Enumerationr/w
Enumerated Values:
1desCbc
5tripleDesCbc
7aesCbc
8aesCbc256
255any
 .1.3.6.1.4.1.2272.1.86.1.1.3
rcIkeProfileEncryptKeyLen
This object specifies the key length
that should be be used during IKE
Phase 1 SA negotiation.
Integer32r/w
Constraints:
range: 256-256
range: 192-192
range: 128-128
 .1.3.6.1.4.1.2272.1.86.1.1.4
rcIkeProfileDHGroup
This object specifies the Diffie-Hellman
groups that can be used during IKE Phase 1
SA negotiation.
Enumerationr/w
Enumerated Values:
1modp768
2modp1024
14modp2048
255any
 .1.3.6.1.4.1.2272.1.86.1.1.5
rcIkeProfileExchangeMode
This object specifies the IKE Phase 1
negotiation mode. Only main mode is
supported for this release.
Enumerationr/w
Enumerated Values:
1main
2aggressive
 .1.3.6.1.4.1.2272.1.86.1.1.6
rcIkeProfileLifetimeSeconds
This object specifies the amount of time to
propose an IKE Phase 1 SA remain valid during
IKE Phase 1 negotiation. A value of 0 means no
expiration.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2272.1.86.1.1.7
rcIkeProfileRowStatus
This object is used to create or delete
entries in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.86.1.1.8

rcIkePolicyTable

table
.1.3.6.1.4.1.2272.1.86.2 · 1 row entry · 19 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIkePolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IKE-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IKE-MIB::rcIkePolicyTable' 
This table contains a list of IKE Phase 1 
policy entries.
rcIkePolicyEntry row .1.3.6.1.4.1.2272.1.86.2.1
.
Indexes
Column Syntax OID
rcIkePolicyLocalIfIndex
This object specifies the Interface Index
of the local address.
Only port and vlan if-index are supported
for this release.
When the value zero is specified on a SET, rcIkePolicyLocalIfIndex
will be obtained from an e…
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2272.1.86.2.1.1
rcIkePolicyLocalAddrType
This object specifies the type of address
field in the rcIkePolicyLocalAddr.
Only IPv6 address types are supported for
this release.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.86.2.1.2
rcIkePolicyLocalAddr
This object specifies the string
representation of the local peer ID.
The type of value configured for this
object is specified by the
rcIkePolicyLocalAddrType.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.86.2.1.3
rcIkePolicyRemoteAddrType
This object specifies the type of address
field in the rcIkePolicyRemoteAddr.
Only IPv6 address types are supported for
this release.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.86.2.1.4
rcIkePolicyRemoteAddr
This object specifies the string
representation of the remote peer ID.
The type of value configured for this
object is specified by the
rcIkePolicyRemoteAddrType.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.86.2.1.5
rcIkePolicyName
This object specifies the name given to the policy.
The name should be assigned during creation of
the policy. Changing the name after the policy
is created is not allowed.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.86.2.1.6
rcIkePolicyProfileName
This object specifies the name of the profile
(rcIkeProfileName) that should be used for
this policy.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.86.2.1.7
rcIkePolicyAuthenticationMethod
This object specifies the proposed
authentication method for the phase 1
security association.
Enumerationr/w
Enumerated Values:
1preSharedKey
2dssSignatures
3rsaSignatures
4encryptionWithRsa
5digitalCertificate
 .1.3.6.1.4.1.2272.1.86.2.1.8
rcIkePolicyPSKValue
This object specifies the value of the
Pre-Shared Key if the authentication method
is set to PSK.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.86.2.1.9
rcIkePolicyDPDTimeout
This object specifies the Dead Peer
Detection timeout in seconds.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2272.1.86.2.1.10
rcIkePolicyP2PFS
This object specifies whether or not perfect
forward secrecy is used when refreshing keys.
Enable indicates that PFS SHOULD be used.
RAPID-CITYEnableValuer/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.86.2.1.11
rcIkePolicyP2PfsUseIkeGroup
This object specifies whether or not to use
the same GroupId (Diffie-Hellman Group) for
phase 2 as was used in phase 1. If P2PFS is
disabled, this entry SHOULD be ignored.
RAPID-CITYEnableValuer/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.86.2.1.12
rcIkePolicyP2PfsDHGroup
This object specifies the Diffie-Hellman group
to use for phase 2 when the object
rcIkePolicyP2PFS is enabled and the object
rcIkePolicyP2PfsUseIkeGroup is disabled.
Enumerationr/w
Enumerated Values:
1modp768
2modp1024
14modp2048
255any
 .1.3.6.1.4.1.2272.1.86.2.1.13
rcIkePolicyAdminState
This object specifies whether the policy
is administratively enabled or disabled.
RAPID-CITYEnableValuer/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.86.2.1.14
rcIkePolicyOperStatus
This object specifies whether the policy
is operationally up or down.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2272.1.86.2.1.15
rcIkePolicyRowStatus
This object is used to create or delete
entries in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.86.2.1.16
rcIkePolicyRevocationCheckMethod
This object specifies the proposed
revocation-check method for digital-certificate
type authentication-method.
Enumerationr/w
Enumerated Values:
1crl
2ocsp
3none
 .1.3.6.1.4.1.2272.1.86.2.1.17
rcIkePolicyProfileVersion
This object maps to the version
of ike profile selected. Default value of
this object is version 1 (v1)
Enumerationr/w
Enumerated Values:
1v1
2v2
 .1.3.6.1.4.1.2272.1.86.2.1.18
rcIkePolicyPeerName
This object specifies the value of the
Peer name if the authentication method
is set to digital certificate.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.86.2.1.19

rcIkeSATable

table
.1.3.6.1.4.1.2272.1.86.3 · 1 row entry · 15 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIkeSATable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IKE-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IKE-MIB::rcIkeSATable' 
This table contains a list of IKE Phase 1 
Security Association entries.
rcIkeSAEntry row .1.3.6.1.4.1.2272.1.86.3.1
.
Indexes
Column Syntax OID
rcIkeSALocalIfIndex
This object specifies the interface index
of the local address.
Only port and vlan if-index are supported
for this release.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2272.1.86.3.1.1
rcIkeSALocalAddrType
This object specifies the type of address
field in the rcIkeSALocalAddr.
Only IPv6 address types are supported for
this release.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.86.3.1.2
rcIkeSALocalAddr
This object specifies the string representation
of the local peer ID. The type of value
configured for this object is specified by the
rcIkeSALocalAddrType.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.86.3.1.3
rcIkeSARemoteAddrType
This object specifies the type of address
field in the rcIkeSARemoteAddr.
Only IPv6 address types are supported for
this release.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.86.3.1.4
rcIkeSARemoteAddr
This object specifies the string representation
of the remote peer ID. The type of value
configured for this object is specified by the
rcIkeSARemoteAddrType.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.86.3.1.5
rcIkeSAName
This object specifies the name for the SA.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.86.3.1.6
rcIkeSAAuthenticationMethod
This object specifies the proposed
authentication method for the phase 1
security association.
Only the Pre-Shared Key authentication
method is supported in this release.
Enumeration
Enumerated Values:
1preSharedKey
2dssSignatures
3rsaSignatures
4encryptionWithRsa
 .1.3.6.1.4.1.2272.1.86.3.1.7
rcIkeSADPDTimeout
This object specifies the Dead Peer
Detection timeout in seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.86.3.1.8
rcIkeSAHashAlgorithm
This object specifies the hash algorithm
negotiated for this IKE Phase 1 SA.
Enumeration
Enumerated Values:
1md5
2sha
4sha256
 .1.3.6.1.4.1.2272.1.86.3.1.9
rcIkeSAEncryptionAlgorithm
This object specifies the encryption
algorithm negotiated for this IKE Phase 1 SA.
Enumeration
Enumerated Values:
1desCbc
5tripleDesCbc
7aesCbc
8aesCbc256
 .1.3.6.1.4.1.2272.1.86.3.1.10
rcIkeSAEncryptKeyLen
This object specifies the encryption
key length negotiated for this IKE Phase 1 SA.
Integer32
Constraints:
range: 192-192
range: 256-256
range: 128-128
 .1.3.6.1.4.1.2272.1.86.3.1.11
rcIkeSADHGroup
This object specifies the Diffie-Hellman
group negotiated for this IKE Phase 1 SA.
Enumeration
Enumerated Values:
1modp768
2modp1024
14modp2048
 .1.3.6.1.4.1.2272.1.86.3.1.12
rcIkeSAExchangeMode
This object specifies the IKE Phase 1 SA mode.
Enumeration
Enumerated Values:
1main
2aggressive
 .1.3.6.1.4.1.2272.1.86.3.1.13
rcIkeSALifetimeSeconds
This object specifies the amount of time to
propose an IKE Phase 1 SA remain valid during
IKE Phase 1 negotiation. A value of 0 means
no expiration.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.86.3.1.14
rcIkeSAStatus
This object specifies the amount of time to
propose an IKE Phase 1 SA remain valid during
IKE Phase 1 negotiation. A value of 0 means no
expiration.
Enumeration
Enumerated Values:
1inactive
2active
 .1.3.6.1.4.1.2272.1.86.3.1.15

rcIkeActiveSATable

table
.1.3.6.1.4.1.2272.1.86.4 · 1 row entry · 17 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIkeActiveSATable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IKE-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IKE-MIB::rcIkeActiveSATable' 
This table contains a list of IKE Phase 1
Security Association entries. This table
	obsoletes rcIkeSATable
rcIkeActiveSAEntry row .1.3.6.1.4.1.2272.1.86.4.1
.
Indexes
Column Syntax OID
rcIkeActiveSAId
This object specifies the unique ID of a SA
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.86.4.1.1
rcIkeActiveSALocalIfIndex
This object specifies the interface index
of the local address.
Only port and vlan if-index are supported
for this release.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2272.1.86.4.1.2
rcIkeActiveSALocalAddrType
This object specifies the type of address
field in the rcIkeActiveSALocalAddr.
Only IPv6 address types are supported for
this release.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.86.4.1.3
rcIkeActiveSALocalAddr
This object specifies the string representation
of the local peer ID. The type of value
configured for this object is specified by the
rcIkeActiveSALocalAddrType.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.86.4.1.4
rcIkeActiveSARemoteAddrType
This object specifies the type of address
field in the rcIkeActiveSARemoteAddr.
Only IPv6 address types are supported for
this release.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.86.4.1.5
rcIkeActiveSARemoteAddr
This object specifies the string representation
of the remote peer ID. The type of value
configured for this object is specified by the
rcIkeActiveSARemoteAddrType.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.86.4.1.6
rcIkeActiveSAName
This object specifies the name for the SA.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.86.4.1.7
rcIkeActiveSAAuthenticationMethod
This object specifies the proposed
authentication method for the phase 1
security association.
Enumeration
Enumerated Values:
1preSharedKey
2dssSignatures
3rsaSignatures
4encryptionWithRsa
5digitalCertificate
 .1.3.6.1.4.1.2272.1.86.4.1.8
rcIkeActiveSADPDTimeout
This object specifies the Dead Peer
Detection timeout in seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.86.4.1.9
rcIkeActiveSAHashAlgorithm
This object specifies the hash algorithm
negotiated for this IKE Phase 1 SA.
Enumeration
Enumerated Values:
1md5
2sha
4sha256
 .1.3.6.1.4.1.2272.1.86.4.1.10
rcIkeActiveSAEncryptionAlgorithm
This object specifies the encryption
algorithm negotiated for this IKE Phase 1 SA.
Enumeration
Enumerated Values:
1desCbc
5tripleDesCbc
7aesCbc
 .1.3.6.1.4.1.2272.1.86.4.1.11
rcIkeActiveSAEncryptKeyLen
This object specifies the encryption
key length negotiated for this IKE Phase 1 SA.
Integer32
Constraints:
range: 256-256
range: 192-192
range: 128-128
 .1.3.6.1.4.1.2272.1.86.4.1.12
rcIkeActiveSADHGroup
This object specifies the Diffie-Hellman
group negotiated for this IKE Phase 1 SA.
Enumeration
Enumerated Values:
1modp768
2modp1024
14modp2048
 .1.3.6.1.4.1.2272.1.86.4.1.13
rcIkeActiveSAExchangeMode
This object specifies the IKE Phase 1 SA mode.
Enumeration
Enumerated Values:
1main
2aggressive
 .1.3.6.1.4.1.2272.1.86.4.1.14
rcIkeActiveSALifetimeSeconds
This object specifies the amount of time to
propose an IKE Phase 1 SA remain valid during
IKE Phase 1 negotiation. A value of 0 means
no expiration.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.86.4.1.15
rcIkeActiveSAStatus
This object specifies the amount of time to
propose an IKE Phase 1 SA remain valid during
IKE Phase 1 negotiation. A value of 0 means no
expiration.
Enumeration
Enumerated Values:
1inactive
2active
 .1.3.6.1.4.1.2272.1.86.4.1.16
rcIkeActiveSAInitiator
This object specifies the whether the SA was
created by an Initiator or a Responder
Enumeration
Enumerated Values:
1initiator
2responder
 .1.3.6.1.4.1.2272.1.86.4.1.17

rcIkeV2ProfileTable

table
.1.3.6.1.4.1.2272.1.86.5 · 1 row entry · 9 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIkeV2ProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IKE-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IKE-MIB::rcIkeV2ProfileTable' 
This table contains a list of Ike v2 profiles
consisting of algorithms and other
configuration that can be used during an
IKE connection.
rcIkeV2ProfileEntry row .1.3.6.1.4.1.2272.1.86.5.1
An entry containing configuration information
for authentication algorithms, encryption
algorithms, Diffie-Helman group, exchange-mode
and lifetime-seconds to be used for
negotiation.
Indexes
Column Syntax OID
rcIkeV2ProfileName
This object contains the name of this Profile.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.86.5.1.1
rcIkeV2ProfileHashAlgorithm
This object specifies the hash algorithms
that can be used during IKE SA
negotiation.
It is represented in form of bits as follows-
bit 0 - md5
bit 1 - sha
bit 2 - sha256
Bitsr/w
Enumerated Values:
0md5
1sha
2sha256
 .1.3.6.1.4.1.2272.1.86.5.1.2
rcIkeV2ProfileEncryptionAlgorithm
This object specifies the encryption
algorithms that can be used during IKE
SA negotiation.
It is represented in form of bits as follows-
bit 0 - desCbc
bit 1 - tripleDesCbc
bit 2 - aesCbc
Bitsr/w
Enumerated Values:
0desCbc
1tripleDesCbc
2aesCbc
 .1.3.6.1.4.1.2272.1.86.5.1.3
rcIkeV2ProfileEncryptKeyLen
This object specifies the key length
that should be be used during IKE
SA negotiation.
It is represented in form of bits as follows-
bit 0 - keylen-128
bit 1 - keylen-192
bit 2 - keylen-256
Bitsr/w
Enumerated Values:
0keylen-128
1keylen-192
2keylen-256
 .1.3.6.1.4.1.2272.1.86.5.1.4
rcIkeV2ProfileDHGroup
This object specifies the Diffie-Hellman
groups that can be used during IKE
SA negotiation.
It is represented in form of bits as follows -
bit 0 - modp768
bit 1 - modp1024
bit 2 - modp2048
Bitsr/w
Enumerated Values:
0modp768
1modp1024
2modp2048
 .1.3.6.1.4.1.2272.1.86.5.1.5
rcIkeV2ProfileExchangeMode
This object specifies the IKE
negotiation mode. Only main mode is
supported for this release.
Enumerationr/w
Enumerated Values:
1main
2aggressive
 .1.3.6.1.4.1.2272.1.86.5.1.6
rcIkeV2ProfileLifetimeSeconds
This object specifies the amount of time to
propose an IKE SA remain valid during
IKE negotiation. A value of 0 means no
expiration.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2272.1.86.5.1.7
rcIkeV2ProfileIntegrityAlgorithm
This object specifies the integrity algorithms
that can be used during IKE SA
negotiation.
It is represented in form of bits as follows -
bit 0 - md5
bit 1 - sha1
bit 2 - sha256
bit 3 - aes-xcbc
Bitsr/w
Enumerated Values:
0md5
1sha1
2sha256
3aes-xcbc
 .1.3.6.1.4.1.2272.1.86.5.1.8
rcIkeV2ProfileRowStatus
This object is used to create or delete
entries in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.86.5.1.9

rcIkeV2SATable

table
.1.3.6.1.4.1.2272.1.86.6 · 1 row entry · 18 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rcIkeV2SATable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-IKE-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-IKE-MIB::rcIkeV2SATable' 
This table contains a list of IKE V2
Security Association entries.
rcIkeV2SAEntry row .1.3.6.1.4.1.2272.1.86.6.1
.
Indexes
Column Syntax OID
rcIkeV2SAId
This object specifies the unique ID of a SA
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.86.6.1.1
rcIkeV2SALocalIfIndex
This object specifies the interface index
of the local address.
Only port and vlan if-index are supported
for this release.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2272.1.86.6.1.2
rcIkeV2SALocalAddrType
This object specifies the type of address
field in the rcIkeActiveSALocalAddr.
Only IPv6 address types are supported for
this release.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.86.6.1.3
rcIkeV2SALocalAddr
This object specifies the string representation
of the local peer ID. The type of value
configured for this object is specified by the
rcIkeV2SALocalAddrType.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.86.6.1.4
rcIkeV2SARemoteAddrType
This object specifies the type of address
field in the rcIkeV2SARemoteAddr.
Only IPv6 address types are supported for
this release.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2272.1.86.6.1.5
rcIkeV2SARemoteAddr
This object specifies the string representation
of the remote peer ID. The type of value
configured for this object is specified by the
rcIkeV2SARemoteAddrType.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2272.1.86.6.1.6
rcIkeV2SAName
This object specifies the name for the SA.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.86.6.1.7
rcIkeV2SAAuthenticationMethod
This object specifies the proposed
authentication method for the phase 1
security association.
Only the Pre-Shared Key authentication
method is supported in this release.
Enumeration
Enumerated Values:
1preSharedKey
2dssSignatures
3rsaSignatures
4encryptionWithRsa
 .1.3.6.1.4.1.2272.1.86.6.1.8
rcIkeV2SADPDTimeout
This object specifies the Dead Peer
Detection timeout in seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.86.6.1.9
rcIkeV2SAHashAlgorithm
This object specifies the hash algorithm
negotiated for this IKEv2 SA.
Enumeration
Enumerated Values:
1md5
2sha
5sha256
 .1.3.6.1.4.1.2272.1.86.6.1.10
rcIkeV2SAEncryptionAlgorithm
This object specifies the encryption
algorithm negotiated for this IKEv2 SA.
Enumeration
Enumerated Values:
2desCbc
3tripleDesCbc
12aesCbc
 .1.3.6.1.4.1.2272.1.86.6.1.11
rcIkeV2SAEncryptKeyLen
This object specifies the encryption
key length negotiated for this IKE V2 SA.
Integer32
Constraints:
range: 256-256
range: 192-192
range: 128-128
 .1.3.6.1.4.1.2272.1.86.6.1.12
rcIkeV2SADHGroup
This object specifies the Diffie-Hellman
group negotiated for this IKE V2 SA.
Enumeration
Enumerated Values:
1modp768
2modp1024
14modp2048
 .1.3.6.1.4.1.2272.1.86.6.1.13
rcIkeV2SAExchangeMode
This object specifies the IKE V2 SA mode.
Enumeration
Enumerated Values:
1main
2aggressive
 .1.3.6.1.4.1.2272.1.86.6.1.14
rcIkeV2SALifetimeSeconds
This object specifies the amount of time to
propose an IKE V2 SA remain valid during
IKE negotiation. A value of 0 means
no expiration.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.86.6.1.15
rcIkeV2SAStatus
This object specifies the amount of time to
propose an IKE V2 SA remain valid during
IKE V2 negotiation. A value of 0 means no
expiration.
Enumeration
Enumerated Values:
1inactive
2active
 .1.3.6.1.4.1.2272.1.86.6.1.16
rcIkeV2SAInitiator
This object specifies the whether the SA was
created by an Initiator or a Responder
Enumeration
Enumerated Values:
1initiator
2responder
 .1.3.6.1.4.1.2272.1.86.6.1.17
rcIkeV2SAIntegrityAlgorithm
This object specifies the integrity algorithms
that can be used during IKEv2 SA
negotiation.
Enumeration
Enumerated Values:
1md5
2sha1
5aes-xcbc
12sha256
 .1.3.6.1.4.1.2272.1.86.6.1.18