RC-CFM-MIB Table View

Connectivity Fault Management Maintenance Domain table

rcCfmMaintenanceDomainEntry row .1.3.6.1.4.1.2272.1.69.1.1

Connectivity Fault Management Maintenance Domain entry.

Indexes

rcCfmMaintenanceDomainIndex

Column	Syntax	OID
rcCfmMaintenanceDomainIndex Maintenance Domain index	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.1.1.1
rcCfmMaintenanceDomainName Maintenance Domain Name	OctetStringr/w Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.69.1.1.2
rcCfmMaintenanceDomainRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.1.1.3
rcCfmMaintenanceDomainNumOfMa Used to indicate the number of MAs belong to this maintenance domain	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.1.1.4
rcCfmMaintenanceDomainClearStats To clear the MEPS CCM sending/receiving message counter un der this domain	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.1.1.5
rcCfmMaintenanceDomainLevel To set the maintenance level in this domain	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.1.1.6
rcCfmMaintenanceDomainNumOfMip Used to indicate the number of Mips belong to this maintenance domain	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.1.1.7
rcCfmMaintenanceDomainType To indicate the type of domain	Enumeration Enumerated Values: 0 none 1 trunk 2 sg 3 endpt 4 vlan 5 port 6 mimencapvlan 7 nodal	.1.3.6.1.4.1.2272.1.69.1.1.8
rcCfmMaintenanceDomainEventTrapEnable Event Trap enable	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.1.1.9
rcCfmMaintenanceDomainPmEnable Performance monitor enable	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.1.1.10
rcCfmMaintenanceDomainClearAisStats To clear the AIS CCM sending/receiving message counter un der this domain	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.1.1.11

Connectivity Fault Management Maintenance Association table

rcCfmMaintenanceAssociationEntry row .1.3.6.1.4.1.2272.1.69.2.1

Connectivity Fault Management Maintenance Association entry.

Indexes

rcCfmMaintenanceAssociationDomainIndex rcCfmMaintenanceAssociationAssociationIndex

Column	Syntax	OID
rcCfmMaintenanceAssociationDomainIndex Maintenance Association Domain Index	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.2.1.1
rcCfmMaintenanceAssociationAssociationIndex Maintenance Association Index	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.2.1.2
rcCfmMaintenanceAssociationDomainName Maintenance Association Domain Name	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.69.2.1.3
rcCfmMaintenanceAssociationAssociationName Maintenance Association Name	OctetStringr/w Constraints: range: 1-255	.1.3.6.1.4.1.2272.1.69.2.1.4
rcCfmMaintenanceAssociationAdminState Administratively enable or disable a maintenance association.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.2.1.5
rcCfmMaintenanceAssociationRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.2.1.6
rcCfmMaintenanceAssociationCcmInterval Interval of periodic Continuity Check Message to be transmitted	millisecondsInteger32r/w Constraints: range: 0-65535000	.1.3.6.1.4.1.2272.1.69.2.1.7
rcCfmMaintenanceAssociationCcmLifetime Lifetime of periodic Continuity Check Message	Integer32r/w Constraints: range: 0-655350	.1.3.6.1.4.1.2272.1.69.2.1.8
rcCfmMaintenanceAssociationCcmPriority Priority of Continuity Check Message to be transmitted	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.2.1.9
rcCfmMaintenanceAssociationCcmTxEnable Continuity Check Message transmit enable	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.2.1.10
rcCfmMaintenanceAssociationCcmRxEnable Continuity Check Message receive enable	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.2.1.11
rcCfmMaintenanceAssociationNumOfMep Used to indicate the number of MEPs belong to this maintenance association	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.2.1.12
rcCfmMaintenanceAssociationClearStats To clear the MEPs CCM sending/receiving message counter under this MA	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.2.1.13
rcCfmMaintenanceAssociationAutoDetect Indicates whether MA allows auto-detect of remote MEPs	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.2.1.14
rcCfmMaintenanceAssociationNumOfRemoteMep Used to indicate the number of remote MEPs belong to this maintenance association	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.2.1.15
rcCfmMaintenanceAssociationRemoveAutoRmep Remove auto learned Remote Maintenance Endpoint ID, or 0 for unspecified	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2272.1.69.2.1.16
rcCfmMaintenanceAssociationCcmRdiEnable Continuity Check Message RDI enable	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.2.1.17
rcCfmMaintenanceAssociationCcmMulticast Indicates whether MA sends Multicast or Unicast CCMs	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.2.1.18
rcCfmMaintenanceAssociationEventTrapEnable Event Trap enable This MA level setting overrides MD level setting.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.2.1.19
rcCfmMaintenanceAssociationPmEnable Performance monitor enable This MA level setting overrides MD level setting.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.2.1.20
rcCfmMaintenanceAssociationClearAisStats To clear the Ais CCM sending/receiving message counter under this MA	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.2.1.21

Connectivity Fault Management Maintenance Association table

rcCfmMaintenanceEndPointEntry row .1.3.6.1.4.1.2272.1.69.3.1

Connectivity Fault Management Maintenance EndPoint entry.

Indexes

rcCfmMaintenanceEndPointDomainIndex rcCfmMaintenanceEndPointAssociationIndex rcCfmMaintenanceEndPointId

Column	Syntax	OID
rcCfmMaintenanceEndPointDomainIndex Maintenance Domain Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.3.1.1
rcCfmMaintenanceEndPointAssociationIndex Maintenance Association Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.3.1.2
rcCfmMaintenanceEndPointId Maintenance EndPoint ID	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.3.1.3
rcCfmMaintenanceEndPointDomainName Maintenance Domain Name	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.69.3.1.4
rcCfmMaintenanceEndPointAssociationName Maintenance Association Name	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.69.3.1.5
rcCfmMaintenanceEndPointAdminState Administratively enable or disable a maintenance EndPoint.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.3.1.6
rcCfmMaintenanceEndPointRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.3.1.7
rcCfmMaintenanceEndPointCcmPriority Priority of Continuity Check Message to be transmitted	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.3.1.8
rcCfmMaintenanceEndPointCcmTxEnable Continuity Check Message transmit enable	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.3.1.9
rcCfmMaintenanceEndPointCcmRxEnable Continuity Check Message receive enable	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.3.1.10
rcCfmMaintenanceEndPointMepType Mep Type	Enumeration Enumerated Values: 1 trunk 2 sg 4 endpt 8 unused 16 vlan 32 port 64 endptClient 32769 remotetrunk 32770 remotesg 32772 remoteendpt 32784 remoteVlan 32800 remotePort 32832 remoteEndptClient 3145728 nodal	.1.3.6.1.4.1.2272.1.69.3.1.11
rcCfmMaintenanceEndPointClearStats To clear the MEP CCM sending/receiving message counter	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.3.1.12
rcCfmMaintenanceEndPointServiceDescription Used to specify what service this mep assigned to	OctetString Constraints: range: 0-48	.1.3.6.1.4.1.2272.1.69.3.1.13
rcCfmMaintenanceEndPointRemoveAutoRmep Remove auto learned Remote Maintenance Endpoint ID, or 0 for unspecified	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2272.1.69.3.1.14
rcCfmMaintenanceEndPointMepStatus Indicating if the mep status is active or inactive. Only Dual-Home Ring endpoint client meps can have active/inactive status. All other mep types have active status.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.2272.1.69.3.1.15
rcCfmMaintenanceEndPointAisTxEnable Alarm Indication Signal Message transmit enable	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.3.1.16
rcCfmMaintenanceEndPointAisInterval Interval of periodic Alarm Indication Signal Message to be transmitted. Unit in milliseconds.	millisecondsEnumerationr/w Enumerated Values: 1000 intv1000 60000 intv60000	.1.3.6.1.4.1.2272.1.69.3.1.17
rcCfmMaintenanceEndPointIfTlv Admin control of the Interface-Status-Tlv in maintenanceEndpoint.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.3.1.18
rcCfmMaintenanceEndPointMepDirection Indicates the direction in which the Maintenance association faces on the bridge port.	Enumeration Enumerated Values: 1 up 2 down 3 unknown	.1.3.6.1.4.1.2272.1.69.3.1.19
rcCfmMaintenanceEndPointClearAisStats To clear the AIS sending/receiving message counter	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.3.1.20
rcCfmMaintenanceEndPointIfIndex This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2272.1.69.3.1.21
rcCfmMaintenanceEndPointCcmVlanId Customer CCM VLAN ID	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.2272.1.69.3.1.22
rcCfmMaintenanceEndPointLabel User provided field. Used to give extra management information/data.	OctetStringr/w Constraints: range: 0-48	.1.3.6.1.4.1.2272.1.69.3.1.23

Connectivity Fault TrunkGroup table

rcCfmTrunkGroupEntry row .1.3.6.1.4.1.2272.1.69.4.1

Connectivity Fault Management TrunkGroup entry.

Indexes

rcCfmTrunkGroupName

Column	Syntax	OID
rcCfmTrunkGroupName Trunk Group Name	RAPID-CITYCfmNameString Type Constraints: range: 0..32	.1.3.6.1.4.1.2272.1.69.4.1.1
rcCfmTrunkGroupRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.4.1.2
rcCfmTrunkGroupPrimaryTrunk Trunk Group PBT Primary Trunk Name	OctetStringr/w Constraints: range: 32-32	.1.3.6.1.4.1.2272.1.69.4.1.3
rcCfmTrunkGroupSecondaryTrunk Trunk Group PBT Secondary Trunk Name	OctetStringr/w Constraints: range: 32-32	.1.3.6.1.4.1.2272.1.69.4.1.4
rcCfmTrunkGroupActiveTrunk Trunk Group PBT Active Trunk Name	OctetStringr/w Constraints: range: 32-32	.1.3.6.1.4.1.2272.1.69.4.1.5
rcCfmTrunkGroupRevertive Revertive enable or disable	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.4.1.6
rcCfmTrunkGroupLoopBackVlanId Loopback VLAN ID for local pbt switching	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2272.1.69.4.1.7
rcCfmTrunkGroupUserLabel1 User provided field. Used to give extra management information/data	OctetStringr/w Constraints: range: 0-89	.1.3.6.1.4.1.2272.1.69.4.1.8
rcCfmTrunkGroupUserLabel2 User provided additional field. Used to give extra management information/data	OctetStringr/w Constraints: range: 0-89	.1.3.6.1.4.1.2272.1.69.4.1.9

Connectivity Fault Trunk table

rcCfmTrunkEntry row .1.3.6.1.4.1.2272.1.69.5.1

Connectivity Fault Management Trunk entry.

Indexes

rcCfmTrunkName

Column	Syntax	OID
rcCfmTrunkName PBT Trunk Name	RAPID-CITYCfmNameString Type Constraints: range: 0..32	.1.3.6.1.4.1.2272.1.69.5.1.1
rcCfmTrunkPort PBT Trunk Port	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.69.5.1.2
rcCfmTrunkAdminState Administratively enable or disable a PBT trunk.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.5.1.3
rcCfmTrunkRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.5.1.4
rcCfmTrunkMac Trunk Mac (remote CP mac)	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.5.1.5
rcCfmTrunkMdName PBT Trunk Maintenance Domain Name	OctetStringr/w Constraints: range: 255-255	.1.3.6.1.4.1.2272.1.69.5.1.6
rcCfmTrunkMaName PBT Trunk Maintenance Association Name	OctetStringr/w Constraints: range: 255-255	.1.3.6.1.4.1.2272.1.69.5.1.7
rcCfmTrunkVlanId PBT trunk VLAN ID	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.2272.1.69.5.1.8
rcCfmTrunkReverseVlanId PBT trunk reverse VLAN ID	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.2272.1.69.5.1.9
rcCfmTrunkMepId PBT trunk MEP ID. Range 1-8191 is a valid Mep ID to be assigned to the CFM Trunk. '0' means unassign the Med ID from the CFM Trunk	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2272.1.69.5.1.10
rcCfmTrunkHoldTimer Trunk hold timer value.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.5.1.11
rcCfmTrunkOperStatus The current operational status of this trunk.	Enumeration Enumerated Values: 1 up 2 down 3 waiting	.1.3.6.1.4.1.2272.1.69.5.1.12
rcCfmTrunkSourceMac Trunk Source Mac (local switch PBT mac)	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.5.1.13
rcCfmTrunkClearStats Action to clear the stats for all trunks	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.5.1.14
rcCfmTrunkUserLabel1 User provided field. Used to give extra management information/data	OctetStringr/w Constraints: range: 0-89	.1.3.6.1.4.1.2272.1.69.5.1.15
rcCfmTrunkUserLabel2 User provided additional field. Used to give extra management information/data	OctetStringr/w Constraints: range: 0-89	.1.3.6.1.4.1.2272.1.69.5.1.16
rcCfmTrunkSubportQueueSet Subport Queue Set Index Number	Integer32r/w Constraints: range: 1-80	.1.3.6.1.4.1.2272.1.69.5.1.17
rcCfmTrunkDualHomePartner Enable PBT trunk as Dual Home Partner	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.5.1.18

Connectivity Fault Service Group table

rcCfmServiceGroupEntry row .1.3.6.1.4.1.2272.1.69.6.1

Connectivity Fault Management ServiceGroup entry.

Indexes

rcCfmServiceGroupName

Column	Syntax	OID
rcCfmServiceGroupName PBT ServiceGroup Name	RAPID-CITYCfmNameString Type Constraints: range: 0..32	.1.3.6.1.4.1.2272.1.69.6.1.1
rcCfmServiceGroupPort PBT ServiceGroup Port	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.69.6.1.2
rcCfmServiceGroupAdminState Administratively enable or disable a PBT Service Group.	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.6.1.3
rcCfmServiceGroupRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.6.1.4
rcCfmServiceGroupMac ServiceGroup Mac (remote mac of NPU)	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.6.1.5
rcCfmServiceGroupMdName PBT ServiceGroup Maintenance Domain Name	OctetStringr/w Constraints: range: 255-255	.1.3.6.1.4.1.2272.1.69.6.1.6
rcCfmServiceGroupMaName PBT ServiceGroup Maintenance Association Name	OctetStringr/w Constraints: range: 255-255	.1.3.6.1.4.1.2272.1.69.6.1.7
rcCfmServiceGroupTgName PBT ServiceGroup Trunk Group Name	OctetStringr/w Constraints: range: 32-32	.1.3.6.1.4.1.2272.1.69.6.1.8
rcCfmServiceGroupMepId PBT ServiceGroup MEP ID. Range 1-8191 is a valid Mep ID to be assigned to the CFM Service group. '0' means unassign the Med ID from the CFM service group	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2272.1.69.6.1.9
rcCfmServiceGroupRingId Ring ID associated with Service Group	Integer32r/w Constraints: range: 0-254	.1.3.6.1.4.1.2272.1.69.6.1.10
rcCfmServiceGroupCcmOperStatus The current CCM operational status of this service group.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.69.6.1.11

CFM stats table

rcCfmStatsEntry row .1.3.6.1.4.1.2272.1.69.8.1

CFM Stats table entry. Contain CFM Message
sending/receiving and missing counter

Indexes

rcCfmStatsDomainIndex rcCfmStatsAssociationIndex rcCfmStatsMepId

Column	Syntax	OID
rcCfmStatsDomainIndex Maintenance Domain Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.8.1.1
rcCfmStatsAssociationIndex Maintenance Association Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.8.1.2
rcCfmStatsDomainName Maintenance Domain Name	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.69.8.1.3
rcCfmStatsAssociationName Maintenance Association Name	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.69.8.1.4
rcCfmStatsMepId Maintenance EndPoint ID	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.8.1.5
rcCfmStatsTxCnt The total Number of CFM messages are transmitted by trunk or ESM port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.8.1.6
rcCfmStatsRxCnt The total Number of CFM messages are received by trunk or ESM port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.8.1.7
rcCfmStatsRxZeroCnt The total Number of CFM messages are received by trunk or ESM port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.8.1.8
rcCfmStatsMissedCnt The total Number of CFM messages are missing on trunk or ESM port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.8.1.9
rcCfmStatsUpTimeCnt The total Time of CFM messages are UP on trunk or ESM port in milliseconds	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.8.1.10
rcCfmStatsDefect An enumerated value indicating the highest-priority defect that has been present since the MEP Fault Notification Generate State Machine was last in the FNG_RESET state, either: 1) DefRDICCM: The last CCM received by th…	Integer32 Constraints: range: 0-5	.1.3.6.1.4.1.2272.1.69.8.1.11
rcCfmStatsAisTxCnt The total Number of AIS messages transmitted by Client Mep on Port/MLT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.8.1.12
rcCfmStatsAisRxCnt The total Number of AIS messages received by Client Mep on Port/MLT	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.8.1.13
rcCfmStatsAisOperState To indicate the operational status of AIS. It is set to true when AIS is transmitted. It is set to false when AIS is cleared.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.2272.1.69.8.1.14
rcCfmStatsAisMipLevel This is Maintenance Domain Level of the MIP on which the AIS is transmitted.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.8.1.15
rcCfmStatsIfTlvTx To indicate the operational state of Interface Status TLV transmitted on MaintenanceEndpoint. This status indicates that the state of the local UNI Port.	Enumeration Enumerated Values: 1 none 2 up 3 down 4 lowerLayerDown 5 testing 6 unknown 7 dormant 8 notpresent	.1.3.6.1.4.1.2272.1.69.8.1.16
rcCfmStatsAccessDrops The total number of packets dropped on ingress to access port, for this MEP, due to same or lower MD level	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.8.1.17
rcCfmStatsAggregateUplinkDrops The total number of packets dropped on ingress to uplink port, for all MEPS, due to lower MD level	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.8.1.18

Connectivity Fault Management Remote Maintenance Association table

rcCfmRemoteMepConfigEntry row .1.3.6.1.4.1.2272.1.69.11.1

Connectivity Fault Management Remote Maintenance EndPoint entry.

Indexes

rcCfmRemoteMepConfigDomainIndex rcCfmRemoteMepConfigAssociationIndex rcCfmRemoteMepConfigId

Column	Syntax	OID
rcCfmRemoteMepConfigDomainIndex Remote Maintenance Domain Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.11.1.1
rcCfmRemoteMepConfigAssociationIndex Remote Maintenance Association Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.11.1.2
rcCfmRemoteMepConfigId Remote Maintenance EndPoint ID	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.11.1.3
rcCfmRemoteMepConfigDomainName Remote Maintenance Domain Name	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.69.11.1.4
rcCfmRemoteMepConfigAssociationName Remote Maintenance Association Name	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.69.11.1.5
rcCfmRemoteMepConfigMacAddr Mac address of remote maintenance endpoint	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.11.1.6
rcCfmRemoteMepConfigRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.11.1.7

CFM Mep Learn stats table contains the 
local and remote mep Tx and Rx statistics

rcCfmRemoteMepStatsEntry row .1.3.6.1.4.1.2272.1.69.12.1

CFM Stats table entry. Contain CFM Message
sending/receiving and missing counter.
Entry indicate the CCM message still alive

Indexes

rcCfmRemoteMepStatsDomainIndex rcCfmRemoteMepStatsAssociationIndex rcCfmRemoteMepStatsMepId rcCfmRemoteMepStatsRemoteMepId

Column	Syntax	OID
rcCfmRemoteMepStatsDomainIndex Maintenance Domain Name index	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.12.1.1
rcCfmRemoteMepStatsAssociationIndex Maintenance Association Name index	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.12.1.2
rcCfmRemoteMepStatsMepId Local MEP (Maintenance EndPoint) ID	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.12.1.3
rcCfmRemoteMepStatsRemoteMepId Remote Mep Id which the local mep rx CCM message from	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.12.1.4
rcCfmRemoteMepStatsDomainName Maintenance Domain Name	OctetString Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.12.1.5
rcCfmRemoteMepStatsAssociationName Maintenance Association Name	OctetString Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.12.1.6
rcCfmRemoteMepStatsLearnType Indicate the learning remote Mep is static created or dynamic learn	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.2272.1.69.12.1.7
rcCfmRemoteMepStatsRemoteMacAddr A remote MAC address	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.12.1.8
rcCfmRemoteMepStatsRxCnt The total Number of CFM messages are received by trunk or ESM port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.12.1.9
rcCfmRemoteMepStatsSeqErrCnt The total Number of Sequence errors	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.12.1.10
rcCfmRemoteMepStatsOperState To indicate the operational state of remote maintenance endpoint	Enumeration Enumerated Values: 1 start 2 up 3 down	.1.3.6.1.4.1.2272.1.69.12.1.11
rcCfmRemoteMepStatsClearStats To clear the CCM messages counter	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.12.1.12
rcCfmRemoteMepStatsDbRdi State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.12.1.13
rcCfmRemoteMepStatsIfTlvRx To indicate the operational state of Interface Status TLV received on MaintenanceEndpoint. This status indicates that the state of the remote UNI Port	Enumeration Enumerated Values: 1 none 2 up 3 down 4 lowerLayerDown 5 testing 6 unknown 7 dormant 8 notpresent	.1.3.6.1.4.1.2272.1.69.12.1.14

Connectivity Fault Management Maintenance Intermediate Point table

rcCfmMaintenanceIntermediatePointEntry row .1.3.6.1.4.1.2272.1.69.13.1

Connectivity Fault Management Maintenance Intermediate Point entry.

Indexes

rcCfmMaintenanceIntermediatePointDomainIndex rcCfmMaintenanceIntermediatePointId

Column	Syntax	OID
rcCfmMaintenanceIntermediatePointDomainIndex Maintenance Domain Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.13.1.1
rcCfmMaintenanceIntermediatePointId Maintenance IntermediatePoint ID	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.13.1.2
rcCfmMaintenanceIntermediatePointDomainName Maintenance Domain Name	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2272.1.69.13.1.3
rcCfmMaintenanceIntermediatePointRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.13.1.4
rcCfmMaintenanceIntermediatePointMipType Mip Type	Enumeration Enumerated Values: 1 vlan 2 unused 4 endptClient	.1.3.6.1.4.1.2272.1.69.13.1.5
rcCfmMaintenanceIntermediatePointClearStats To clear the MIP CCM sending/receiving message counter	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.13.1.6
rcCfmMaintenanceIntermediatePointServiceDescription Used to specify what service this mip assigned to	OctetString Constraints: range: 0-48	.1.3.6.1.4.1.2272.1.69.13.1.7

CFM NNI table

rcCfmNniEntry row .1.3.6.1.4.1.2272.1.69.14.1

CFM NNI table entry

Indexes

rcCfmNniPort rcCfmNniServiceId rcCfmNniPwIndex rcCfmNniTlsIndex

Column	Syntax	OID
rcCfmNniPort PBT Trunk Port	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.69.14.1.1
rcCfmNniServiceId TDI or MIM	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.69.14.1.2
rcCfmNniPwIndex PW index	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.69.14.1.3
rcCfmNniTlsIndex Access Port	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.14.1.4
rcCfmNniTgName PBT Trunk Group Name	OctetString Constraints: range: 32-32	.1.3.6.1.4.1.2272.1.69.14.1.5

CFM NNI stats table

rcCfmNniStatsEntry row .1.3.6.1.4.1.2272.1.69.15.1

CFM NNI Stats table entry. Contain bytes processed and dropped
due to lookup failure in the SDT table

Indexes

rcCfmNniStatsPort

Column	Syntax	OID
rcCfmNniStatsPort PBT Trunk Port	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.69.15.1.1
rcCfmNniStatsOel2RxOctets The total Number of bytes (OEL2 encapsulation) processed on ingress NNI port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.15.1.2
rcCfmNniStatsOel2RxDroppedOctets The total Number of bytes (OEL2 encapsulation) dropped on ingress NNI port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.15.1.3
rcCfmNniStatsMimRxOctets The total Number of bytes (MIM encapsulation) processed on ingress NNI port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.15.1.4
rcCfmNniStatsMimRxDroppedOctets The total Number of bytes (MIM encapsulation) dropped on ingress NNI port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.15.1.5
rcCfmNniStatsPweRxOctets The total Number of bytes (PWE encapsulation) processed on ingress NNI port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.15.1.6
rcCfmNniStatsPweRxDroppedOctets The total Number of bytes (PWE encapsulation) dropped on ingress NNI port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.15.1.7

CFM Mip stats table

rcCfmMipStatsEntry row .1.3.6.1.4.1.2272.1.69.16.1

CFM Mip Stats table entry. Contain CFM Mip message number of
receiving/replying loopback & linktrace.

Indexes

rcCfmMipStatsDomainIndex rcCfmMipStatsMipId

Column	Syntax	OID
rcCfmMipStatsDomainIndex Maintenance Domain Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.16.1.1
rcCfmMipStatsDomainName Maintenance Domain Name	OctetString Constraints: range: 22-22	.1.3.6.1.4.1.2272.1.69.16.1.2
rcCfmMipStatsMipId Maintenance Intermediate Point ID	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.16.1.3
rcCfmMipStatsLoopbackReceived The total Number of CFM loopback messages received.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.16.1.4
rcCfmMipStatsLoopbackReplied The total Number of CFM loopback messages replied.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.16.1.5
rcCfmMipStatsLinktraceReceived The total Number of CFM linktrace messages received.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.16.1.6
rcCfmMipStatsLinktraceReplied The total Number of CFM linktrace messages replied.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.16.1.7

Connectivity Fault Management transmit LBM table

rcCfmTransmitLbmEntry row .1.3.6.1.4.1.2272.1.69.17.1

Connectivity Fault Management Maintenance EndPoint LBM entry.

Indexes

rcCfmTransmitLbmDomainIndex rcCfmTransmitLbmAssociationIndex rcCfmTransmitLbmIndex

Column	Syntax	OID
rcCfmTransmitLbmDomainIndex Maintenance Domain Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.17.1.1
rcCfmTransmitLbmAssociationIndex Maintenance Association Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.17.1.2
rcCfmTransmitLbmIndex Maintenance EndPoint Index	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.17.1.3
rcCfmTransmitLbmDomainName Maintenance Domain Name	OctetString Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.17.1.4
rcCfmTransmitLbmAssociationName Maintenance Association Name	OctetString Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.17.1.5
rcCfmTransmitLbmDestMacAddress An indication of the target MAC Address Field to be transmitted, either: A unicast destination MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.17.1.6
rcCfmTransmitLbmDestMepId An indication of the target MAC Address Field to be transmitted, either: The Maintenance Assiciation End Point identifier of another MEP in the same Maintenance Association	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2272.1.69.17.1.7
rcCfmTransmitLbmDestIsMepId True indicates that MepId of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.17.1.8
rcCfmTransmitLbmMessages The number of loopback messages to be transmitted.	Integer32r/w Constraints: range: 1-10000	.1.3.6.1.4.1.2272.1.69.17.1.9
rcCfmTransmitLbmVlanPriority Priority. 3 bit value to be used in the VLAN tsg, if present in the transmitted frame.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.17.1.11
rcCfmTransmitLbmVlanDropEnable Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.17.1.12
rcCfmTransmitLbmSeqNumber The transaction identifier/sequence number of the first loopback message (to be) sent.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.17.1.13
rcCfmTransmitLbmResultOk Indicates the result of the operation: -true. The Loopback Message(s) will be (or have been) sent. -false. The Loopback Message(s) will not be sent.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.17.1.14
rcCfmTransmitLbmStatus Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the Loopback messages. …	Enumerationr/w Enumerated Values: 1 ready 2 transmit 3 abort	.1.3.6.1.4.1.2272.1.69.17.1.15
rcCfmTransmitLbmResult Display the LBM result.	OctetString Constraints: range: 1-799	.1.3.6.1.4.1.2272.1.69.17.1.16
rcCfmTransmitLbmMode Modes of the transmit loopback service: throughput: The throughput mode of operation. LBM Frame will be sent out at the configured transmit interval rate for the burst-count number. roun…	Enumerationr/w Enumerated Values: 1 throughput 2 roundTripTime	.1.3.6.1.4.1.2272.1.69.17.1.17
rcCfmTransmitLbmTimeoutInt The interval to wait for an LBM time-out with a range of (1..10) seconds with a default value of 3 seconds.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.69.17.1.18
rcCfmTransmitLbmInterFrameInt The interval between LBM frames with a range of (0..1000) msecs with a default value of 500 msecs. The value of 0 msecs indicates to send the frames as fast as possible.	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.2272.1.69.17.1.19
rcCfmTransmitLbmTestPattern The test pattern to use in the LBM PDU with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a default value of allZero. value meaning -----…	Enumerationr/w Enumerated Values: 1 allZero 2 allZeroCrc 3 pseudoRandomBitSequence 4 pseudoRandomBitSequenceCrc	.1.3.6.1.4.1.2272.1.69.17.1.20
rcCfmTransmitLbmDataSize An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent.	Integer32r/w Constraints: range: 0-400	.1.3.6.1.4.1.2272.1.69.17.1.21
rcCfmTransmitLbmFrameSize If the frame size is specified then the data size shall be internally calculated and the calculated data size shall be included in the data TLV.	Integer32r/w Constraints: range: 0-9600	.1.3.6.1.4.1.2272.1.69.17.1.22
rcCfmTransmitLbmSourceMode Source modes of the transmit loopback service.	Enumerationr/w Enumerated Values: 1 nodal 2 smltVirtual 3 noVlanMac	.1.3.6.1.4.1.2272.1.69.17.1.23

Connectivity Fault Management transmit LBM table

rcCfmTransmitLtmEntry row .1.3.6.1.4.1.2272.1.69.18.1

Connectivity Fault Management Maintenance EndPoint LTM entry.

Indexes

rcCfmTransmitLtmDomainIndex rcCfmTransmitLtmAssociationIndex rcCfmTransmitLtmIndex

Column	Syntax	OID
rcCfmTransmitLtmDomainIndex Maintenance Domain Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.18.1.1
rcCfmTransmitLtmAssociationIndex Maintenance Association Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.18.1.2
rcCfmTransmitLtmIndex Maintenance EndPoint Index	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.18.1.3
rcCfmTransmitLtmDomainName Maintenance Domain Name	OctetString Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.18.1.4
rcCfmTransmitLtmAssociationName Maintenance Association Name	OctetString Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.18.1.5
rcCfmTransmitLtmVlanPriority Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.18.1.6
rcCfmTransmitLtmDestMacAddress An indication of the target MAC Address Field to be transmitted, either: A unicast destination MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.18.1.7
rcCfmTransmitLtmDestMepId An indication of the target MAC Address Field to be transmitted, either: The Maintenance Assiciation End Point identifier of another MEP in the same Maintenance Association	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.2272.1.69.18.1.8
rcCfmTransmitLtmDestIsMepId True indicates that MepId of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.18.1.9
rcCfmTransmitLtmTtl The number of hops remaining to this LTM. Decremented by 1 by each Bridge that handles the LTM. The decremented value is returned in the LTR. If 0 on output, the LTM is not transmitted to the next hop. The value of …	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.69.18.1.10
rcCfmTransmitLtmSeqNumber The transaction identifier/sequence number of the first loopback message (to be) sent.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.69.18.1.11
rcCfmTransmitLtmResultOk Indicates the result of the operation: -true. The Loopback Message(s) will be (or have been) sent. -false. The Loopback Message(s) will not be sent.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.69.18.1.12
rcCfmTransmitLtmStatus Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the Loopback messages. …	Enumerationr/w Enumerated Values: 1 ready 2 transmit 3 abort	.1.3.6.1.4.1.2272.1.69.18.1.13
rcCfmTransmitLtmResultobsolete Display the LTM result.	OctetString Constraints: range: 1-1023	.1.3.6.1.4.1.2272.1.69.18.1.14
rcCfmTransmitLtmFlag LTM result flag indicating LTM status or error code. Each enum value represents a status or error case. 1 - No error 2 - Ltm Internal Error 3 - Unknown Remote Maintenance End Point 4 - Invalid Remote Maintenance En…	Enumeration Enumerated Values: 1 none 2 internalError 3 noRemoteMep 4 invalidRemoteMepMac 5 noRemoteMepMacLearned 6 mepDisabled 7 noLtrResponse 8 ltmToOwnMepMac 9 epDisabled 10 trunkDisabled 11 ltmComplete 12 ltmLeafNode	.1.3.6.1.4.1.2272.1.69.18.1.15
rcCfmTransmitLtmSourceMode Source modes of the transmit linktrace service.	Enumerationr/w Enumerated Values: 1 nodal 2 smltVirtual 3 noVlanMac	.1.3.6.1.4.1.2272.1.69.18.1.16

Table of PBT trunk statistics.

rcCfmPbtTrunkStatsEntry row .1.3.6.1.4.1.2272.1.69.19.1

A PBT Trunk Statistics table entry.

Indexes

rcCfmPbtTrunkStatsName

Column	Syntax	OID
rcCfmPbtTrunkStatsName PBT Trunk Name.	RAPID-CITYCfmNameString Type Constraints: range: 0..32	.1.3.6.1.4.1.2272.1.69.19.1.1
rcCfmPbtTrunkStatsPort PBT Trunk Port	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.69.19.1.2
rcCfmPbtTrunkStatsDA Trunk Mac (remote CP mac)	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.19.1.3
rcCfmPbtTrunkStatsVlanId PBT trunk VLAN ID	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.2272.1.69.19.1.4
rcCfmPbtTrunkStatsRevVlanId PBT trunk reverse VLAN ID	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.2272.1.69.19.1.5
rcCfmPbtTrunkStatsSA Trunk Source Mac (local switch PBT mac)	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.69.19.1.6
rcCfmPbtTrunkStatsRxOctets Number of Octets received by the trunk.This does not include trunk CCM messag (control) packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.7
rcCfmPbtTrunkStatsRxFrames Number of Packets received by the trunk.This does not include trunk CCM messag (control) packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.8
rcCfmPbtTrunkStatsTxOctets Number of Octets transmitted by the trunk.This does not include trunk CCM messag (control) packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.9
rcCfmPbtTrunkStatsTxFrames Number of Packets transmitted by the trunk.This does not include trunk CCM messag (control) packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.10
rcCfmPbtTrunkStatsRxPbit0Octets Number of Pbit 0 Octets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.11
rcCfmPbtTrunkStatsRxPbit0Frames Number of P-Bit 0 Packets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.12
rcCfmPbtTrunkStatsRxPbit1Octets Number of Pbit 1 Octets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.13
rcCfmPbtTrunkStatsRxPbit1Frames Number of P-Bit 1 Packets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.14
rcCfmPbtTrunkStatsRxPbit2Octets Number of Pbit 2 Octets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.15
rcCfmPbtTrunkStatsRxPbit2Frames Number of P-Bit 2 Packets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.16
rcCfmPbtTrunkStatsRxPbit3Octets Number of Pbit 3 Octets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.17
rcCfmPbtTrunkStatsRxPbit3Frames Number of P-Bit 3 Packets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.18
rcCfmPbtTrunkStatsRxPbit4Octets Number of Pbit 4 Octets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.19
rcCfmPbtTrunkStatsRxPbit4Frames Number of P-Bit 4 Packets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.20
rcCfmPbtTrunkStatsRxPbit5Octets Number of Pbit 5 Octets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.21
rcCfmPbtTrunkStatsRxPbit5Frames Number of P-Bit 5 Packets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.22
rcCfmPbtTrunkStatsRxPbit6Octets Number of Pbit64 Octets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.23
rcCfmPbtTrunkStatsRxPbit6Frames Number of P-Bit 6 Packets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.24
rcCfmPbtTrunkStatsRxPbit7Octets Number of Pbit64 Octets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.25
rcCfmPbtTrunkStatsRxPbit7Frames Number of P-Bit 6 Packets received by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.26
rcCfmPbtTrunkStatsTxPbit0Octets Number of Pbit 0 Octets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.27
rcCfmPbtTrunkStatsTxPbit0Frames Number of P-Bit 0 Packets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.28
rcCfmPbtTrunkStatsTxPbit1Octets Number of Pbit 1 Octets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.29
rcCfmPbtTrunkStatsTxPbit1Frames Number of P-Bit 1 Packets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.30
rcCfmPbtTrunkStatsTxPbit2Octets Number of Pbit 2 Octets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.31
rcCfmPbtTrunkStatsTxPbit2Frames Number of P-Bit 2 Packets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.32
rcCfmPbtTrunkStatsTxPbit3Octets Number of Pbit 3 Octets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.33
rcCfmPbtTrunkStatsTxPbit3Frames Number of P-Bit 3 Packets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.34
rcCfmPbtTrunkStatsTxPbit4Octets Number of Pbit 4 Octets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.35
rcCfmPbtTrunkStatsTxPbit4Frames Number of P-Bit 4 Packets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.36
rcCfmPbtTrunkStatsTxPbit5Octets Number of Pbit 5 Octets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.37
rcCfmPbtTrunkStatsTxPbit5Frames Number of P-Bit 5 Packets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.38
rcCfmPbtTrunkStatsTxPbit6Octets Number of Pbit64 Octets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.39
rcCfmPbtTrunkStatsTxPbit6Frames Number of P-Bit 6 Packets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.40
rcCfmPbtTrunkStatsTxPbit7Octets Number of Pbit64 Octets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.41
rcCfmPbtTrunkStatsTxPbit7Frames Number of P-Bit 6 Packets transmitted by the trunk.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.19.1.42

CFM Port stats table contains the 
port Tx and Rx CFM statistics

rcCfmPortStatsEntry row .1.3.6.1.4.1.2272.1.69.20.1

CFM Port Stats table entry. Contain port's CFM Message
sending/receiving counter.

Indexes

rcCfmPortStatsIndex

Column	Syntax	OID
rcCfmPortStatsIndex Slot/Port index	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.69.20.1.1
rcCfmPortStatsTxCnt The total Number of CFM messages that are sent by port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.20.1.2
rcCfmPortStatsRxCnt The total Number of CFM messages are received by port	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.20.1.3

Frame Loss Ratio Profile table

rcCfmFlrEntry row .1.3.6.1.4.1.2272.1.69.21.1

Frame Loss Ratio entry.

Indexes

rcCfmFlrIndex

Column	Syntax	OID
rcCfmFlrIndex Frame-Loss-Ratio profile index	Integer32 Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.69.21.1.1
rcCfmFlrProfileName Frame-Loss-Ratio Profile Name	OctetStringr/w Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.21.1.2
rcCfmFlrRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.21.1.3
rcCfmFlrPriority Frame Loss Ratio messaging runs on COS priority	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.21.1.4
rcCfmFlrAlarmThresholdPercent FLR set alarm threshold percentage	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.21.1.5
rcCfmFlrAlarmThresholdSubPercent FLR set alarm threshold percentage in 1/100 percent increments	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.21.1.6
rcCfmFlrClearThresholdPercent FLR clear alarm threshold percentage	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.21.1.7
rcCfmFlrClearThresholdSubPercent FLR clear alarm threshold percentage in 1/100 percent increments	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.21.1.8
rcCfmFlrThresholdState FLR threshold State	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.21.1.9
rcCfmFlrNumberOfRefs Number of PMs that reference this flr-profile	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.21.1.10

CFM Frame Delay and Frame Delay Variation Profile table

rcCfmFdEntry row .1.3.6.1.4.1.2272.1.69.22.1

Frame Delay and Frame Delay Variation entry.

Indexes

rcCfmFdIndex

Column	Syntax	OID
rcCfmFdIndex Frame-Delay profile index	Integer32 Constraints: range: 1-1000	.1.3.6.1.4.1.2272.1.69.22.1.1
rcCfmFdProfileName Frame-Delay Profile Name	OctetStringr/w Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.22.1.2
rcCfmFdRowStatus Used to create/delete entries	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.69.22.1.3
rcCfmFdPriority Frame Delay messaging runs on COS priority	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.22.1.4
rcCfmFdPerformanceTarget Frame delay performance objective in microseconds	Integer32r/w Constraints: range: 1-10000000	.1.3.6.1.4.1.2272.1.69.22.1.5
rcCfmFdAlarmThresholdPercent FD set alarm threshold percentage	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.22.1.6
rcCfmFdAlarmThresholdSubPercent FD set alarm threshold percentage in 1/100 percent incr ements	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.22.1.7
rcCfmFdClearThresholdPercent FD clear alarm threshold percentage	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.22.1.8
rcCfmFdClearThresholdSubPercent FD clear alarm threshold percentage in 1/100 percent in crements	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.22.1.9
rcCfmFdFdvPerformanceTarget Frame delay variation performance objective in microseconds	Integer32r/w Constraints: range: 1-10000000	.1.3.6.1.4.1.2272.1.69.22.1.10
rcCfmFdFdvAlarmThresholdPercent FDV set alarm threshold percentage	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.22.1.11
rcCfmFdFdvAlarmThresholdSubPercent FDV set alarm threshold percentage in 1/100 percent inc rements	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.22.1.12
rcCfmFdFdvClearThresholdPercent FDV clear alarm threshold percentage	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.22.1.13
rcCfmFdFdvClearThresholdSubPercent FDV clear alarm threshold percentage in 1/100 percent i ncrements	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.22.1.14
rcCfmFdThresholdState FD / FDV threshold State	RAPID-CITYEnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.69.22.1.15
rcCfmFdNumberOfRefs Number of PM's that referencen this fd-profile	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.22.1.16

CFM Frame Loss Ratio Stats Info

rcCfmFlrStatsInfoEntry row .1.3.6.1.4.1.2272.1.69.23.1

Frame Loss Ratio Stats Info entry.

Indexes

rcCfmFlrStatsInfoMdIndex rcCfmFlrStatsInfoMaIndex rcCfmFlrStatsInfoMepId rcCfmFlrStatsInfoRmepId rcCfmFlrStatsInfoPriorityIndex

Column	Syntax	OID
rcCfmFlrStatsInfoMdIndex Maintenance Domain Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.23.1.1
rcCfmFlrStatsInfoMaIndex Maintenance Association Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.23.1.2
rcCfmFlrStatsInfoMepId Maintenance EndPoint ID	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.23.1.3
rcCfmFlrStatsInfoRmepId Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.23.1.4
rcCfmFlrStatsInfoPriorityIndex priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.69.23.1.5
rcCfmFlrStatsInfoMdName Maintenance Domain Name	OctetString Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.23.1.6
rcCfmFlrStatsInfoMaName Maintenance Association Name	OctetString Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.23.1.7
rcCfmFlrStatsInfoPriority Frame Loss Ratio messaging runs on COS priority	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.23.1.8
rcCfmFlrStatsInfoNearEndPercent Measured near-end FLR percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.23.1.9
rcCfmFlrStatsInfoNearEndSubPercent Measured near-end FLR sub percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.23.1.10
rcCfmFlrStatsInfoFarEndPercent Measured far-end FLR percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.23.1.11
rcCfmFlrStatsInfoFarEndSubPercent Measured far-end FLR sub percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.23.1.12
rcCfmFlrStatsInfoPmOperState The operational state of the PM.	RcCfmPmOperState Type Values: 1 rPmUp 2 rPmDown 3 rPmError 4 rPmSync	.1.3.6.1.4.1.2272.1.69.23.1.13

CFM Frame Loss Ratio Stats Current

rcCfmFlrStatsCurrEntry row .1.3.6.1.4.1.2272.1.69.24.1

CFM Frame Loss Ratio Stats Current entry.

Indexes

rcCfmFlrStatsCurrMdIndex rcCfmFlrStatsCurrMaIndex rcCfmFlrStatsCurrMepId rcCfmFlrStatsCurrRmepId rcCfmFlrStatsCurrPriorityIndex

Column	Syntax	OID
rcCfmFlrStatsCurrMdIndex Maintenance Domain Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.24.1.1
rcCfmFlrStatsCurrMaIndex Maintenance Association Name	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2272.1.69.24.1.2
rcCfmFlrStatsCurrMepId Maintenance EndPoint ID	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.24.1.3
rcCfmFlrStatsCurrRmepId Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId	Integer32 Constraints: range: 1-8191	.1.3.6.1.4.1.2272.1.69.24.1.4
rcCfmFlrStatsCurrPriorityIndex priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.69.24.1.5
rcCfmFlrStatsCurrMdName Maintenance Domain Name	OctetString Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.24.1.6
rcCfmFlrStatsCurrMaName Maintenance Association Name	OctetString Constraints: range: 1-22	.1.3.6.1.4.1.2272.1.69.24.1.7
rcCfmFlrStatsCurrPriority Frame Loss Ratio messaging runs on COS priority	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2272.1.69.24.1.8
rcCfmFlrStatsCurrPmOperState The operational state of the PM.	RcCfmPmOperState Type Values: 1 rPmUp 2 rPmDown 3 rPmError 4 rPmSync	.1.3.6.1.4.1.2272.1.69.24.1.9
rcCfmFlrStatsCurrStartTime The date and time stamp.	OctetString Constraints: range: 11-11	.1.3.6.1.4.1.2272.1.69.24.1.10
rcCfmFlrStatsCurrEndTime The date and time stamp.	OctetString Constraints: range: 11-11	.1.3.6.1.4.1.2272.1.69.24.1.11
rcCfmFlrStatsCurrHistInterval History Interval	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.24.1.12
rcCfmFlrStatsCurrSampleRate Sample rate in seconds	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.24.1.13
rcCfmFlrStatsCurrNearEndPercent Measured near-end FLR percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.14
rcCfmFlrStatsCurrNearEndSubPercent Measured near-end FLR sub percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.15
rcCfmFlrStatsCurrFarEndPercent Measured far-end FLR percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.16
rcCfmFlrStatsCurrFarEndSubPercent Measured far-end FLR sub percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.17
rcCfmFlrStatsCurrMinNearEndPercent Measured near-end FLR percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.18
rcCfmFlrStatsCurrMinNearEndSubPercent Measured near-end FLR sub percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.19
rcCfmFlrStatsCurrMinFarEndPercent Measured near-end FLR percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.20
rcCfmFlrStatsCurrMinFarEndSubPercent Measured near-end FLR sub percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.21
rcCfmFlrStatsCurrMaxNearEndPercent Measured near-end FLR percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.22
rcCfmFlrStatsCurrMaxNearEndSubPercent Measured near-end FLR sub percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.23
rcCfmFlrStatsCurrMaxFarEndPercent Measured near-end FLR percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.24
rcCfmFlrStatsCurrMaxFarEndSubPercent Measured near-end FLR sub percentage	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.2272.1.69.24.1.25
rcCfmFlrStatsCurrTxFrames Tx frames	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.24.1.26
rcCfmFlrStatsCurrRxFrames Rx frames	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.24.1.27
rcCfmFlrStatsCurrFlFrames Frame Loss frames	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.24.1.28
rcCfmFlrStatsCurrTxFarEndFrames Far-end Tx frames	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.24.1.29
rcCfmFlrStatsCurrRxFarEndFrames Far-end Rx frames	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.24.1.30
rcCfmFlrStatsCurrFlFarEndFrames Far-end Frame Loss frames	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2272.1.69.24.1.31
rcCfmFlrStatsCurrSamplesPerInterval Samples per interval	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.24.1.32
rcCfmFlrStatsCurrSamplesTransmitted Samples transmitted	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.24.1.33
rcCfmFlrStatsCurrMinFlFrames Minimum sample Frame Loss frames	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.24.1.34
rcCfmFlrStatsCurrSamplesNotSent Samples not sent	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.24.1.35
rcCfmFlrStatsCurrSamplesReceived Samples received	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.24.1.36
rcCfmFlrStatsCurrMinFlFarEndFrames Minimum sample Far-end Frame Loss frames	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.24.1.37
rcCfmFlrStatsCurrMaxFlFrames Maximum sample Frame Loss frames	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.24.1.38
rcCfmFlrStatsCurrMaxFlFarEndFrames Maximum sample Far-end Frame Loss frames	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.69.24.1.39