RC-2K-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
22
Rows
22
Columns
276

rc2kCpuEthernetPortTable

table
.1.3.6.1.4.1.2272.1.100.2 · 1 row entry · 15 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kCpuEthernetPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kCpuEthernetPortTable' 
2k CPU Ethernet Port table
rc2kCpuEthernetPortEntry row .1.3.6.1.4.1.2272.1.100.2.1
Entry containing infomation of 2k CPU Ethernet Port
Indexes
Column Syntax OID
rc2kCpuEthernetPortIfIndex
IfIndex of the port.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2272.1.100.2.1.1
rc2kCpuEthernetPortDescr
Port description
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.100.2.1.2
rc2kCpuEthernetPortAdminStatus
Used to configure the admininstrative status
of the port.
Enumerationr/w
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.2272.1.100.2.1.3
rc2kCpuEthernetPortOperStatus
Used to indicate the administrative status
of the port.
Enumeration
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.2272.1.100.2.1.4
rc2kCpuEthernetPortAddr
Used to configure the port's IP address
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.100.2.1.5
rc2kCpuEthernetPortMask
Used to configure the port's net mask
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.100.2.1.6
rc2kCpuEthernetPortGateway
Used to configure the the IP address of the
gateway that should be used to forward IP
traffic.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.100.2.1.7
rc2kCpuEthernetPortNetwork
Used to configure the network that can be
used to remotely manage this device.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.100.2.1.8
rc2kCpuEthernetPortAutoNegotiate
Used to configure auto-negotiation on this
port.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.2.1.9
rc2kCpuEthernetPortAdminDuplex
Used to configure the administrative duplex
setting for this port.
Enumerationr/w
Enumerated Values:
1half
2full
 .1.3.6.1.4.1.2272.1.100.2.1.10
rc2kCpuEthernetPortOperDuplex
Used to indicate the operational duplex
setting for this port.
Enumeration
Enumerated Values:
1half
2full
 .1.3.6.1.4.1.2272.1.100.2.1.11
rc2kCpuEthernetPortAdminSpeed
Used to configure the administrative speed
setting for this port.
Enumerationr/w
Enumerated Values:
0none
1mbps10
2mbps100
 .1.3.6.1.4.1.2272.1.100.2.1.12
rc2kCpuEthernetPortOperSpeed
Used to indicate the operational duplex
setting for this port.
Enumeration
Enumerated Values:
0none
1mbps10
2mbps100
3mbps1000
 .1.3.6.1.4.1.2272.1.100.2.1.13
rc2kCpuEthernetPortEnableBootp
Used to enable/disable the Bootp feature
on this port.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.2.1.14
rc2kCpuEthernetPortMgmtMacAddr
Used to indicate the mac addr for this port.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2272.1.100.2.1.15

rc2kCpuSerialPortTable

table
.1.3.6.1.4.1.2272.1.100.3 · 1 row entry · 13 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kCpuSerialPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kCpuSerialPortTable' 
2k CPU Serial Port table
rc2kCpuSerialPortEntry row .1.3.6.1.4.1.2272.1.100.3.1
Entry containing infomation of 2k CPU Serial Port
Indexes
Column Syntax OID
rc2kCpuSerialPortIfIndex
IfIndex for this port.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2272.1.100.3.1.1
rc2kCpuSerialPortDescr
Port description.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.100.3.1.2
rc2kCpuSerialPortMode
Used to configure the mode this port should
operate in.
Enumerationr/w
Enumerated Values:
1cli
2slip
3ppp
 .1.3.6.1.4.1.2272.1.100.3.1.3
rc2kCpuSerialPortAdminStatus
Used to configure the administrative status
setting for this port.
Enumerationr/w
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.2272.1.100.3.1.4
rc2kCpuSerialPortOperStatus
Used to indicate the operational status
setting for this port.
Enumeration
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.2272.1.100.3.1.5
rc2kCpuSerialPortBaudRate
Used to configure the baud rate of this port.
Enumerationr/w
Enumerated Values:
2400baud2400
4800baud4800
9600baud9600
19200baud19200
38400baud38400
57600baud57600
115200baud115200
 .1.3.6.1.4.1.2272.1.100.3.1.6
rc2kCpuSerialPortDataBits
Used to configure the number of data bits, per
byte of data, this port should send/receive.
Enumerationr/w
Enumerated Values:
1seven
2eight
 .1.3.6.1.4.1.2272.1.100.3.1.7
rc2kCpuSerialPortMyAddr
Used to configure this port's IP address.
Used for both 'slip' and 'ppp' modes.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.100.3.1.8
rc2kCpuSerialPortPeerAddr
Used to configure the peer's IP address.
Used for both 'slip' and 'ppp' modes.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.100.3.1.9
rc2kCpuSerialPortSlipMtu
Used to configure the MTU for this port.
Used for slip only.
Integer32r/w
Constraints:
range: 0-224
 .1.3.6.1.4.1.2272.1.100.3.1.10
rc2kCpuSerialPortSlipTxRxCompress
Used to enable/disable compression of TCP/IP
packet headers on this port. Used for slip only.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.3.1.11
rc2kCpuSerialPortSlipRxCompress
Used to enable/disable compression for receiving
packets on this port. Used for slip only.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.3.1.12
rc2kCpuSerialPortPppConfigFile
Used to configure the configuration file to use
for PPP.
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.2272.1.100.3.1.13

rc2kDeviceGlobalTable

table
.1.3.6.1.4.1.2272.1.100.4.1 · 1 row entry · 20 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kDeviceGlobalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kDeviceGlobalTable' 
2k CPU Ethernet Port table
rc2kDeviceGlobalEntry row .1.3.6.1.4.1.2272.1.100.4.1.1
Entry containing infomation of 2k CPU Ethernet Port
Indexes
Column Syntax OID
rc2kDeviceGlobalSlot
slot number
Integer32
Constraints:
range: 1-6
 .1.3.6.1.4.1.2272.1.100.4.1.1.1
rc2kDeviceGlobalFlashBytesUsed
bytes used
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.2
rc2kDeviceGlobalFlashBytesFree
bytes free
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.3
rc2kDeviceGlobalFlashNumFiles
# files in flash
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.4
rc2kDeviceGlobalPcmciaBytesUsed
bytes used
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.5
rc2kDeviceGlobalPcmciaBytesFree
bytes free
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.6
rc2kDeviceGlobalPcmciaNumFiles
# files in pcmcia
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.7
rc2kDeviceGlobalAction
none(1), resetPcmcia(2), ..
Enumerationr/w
Enumerated Values:
1none
2resetPcmcia
3pcmciaStop
4pcmciaStart
 .1.3.6.1.4.1.2272.1.100.4.1.1.8
rc2kDeviceGlobalResult
Used to indicate the result of the last action
performed on one of the system's device.
Enumeration
Enumerated Values:
1none
2inProgress
3success
4fail
 .1.3.6.1.4.1.2272.1.100.4.1.1.9
rc2kDeviceGlobalFlash1BytesUsed
bytes used
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.10
rc2kDeviceGlobalFlash1BytesFree
bytes free
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.11
rc2kDeviceGlobalFlash1NumFiles
# files in flash
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.12
rc2kDeviceGlobalUsbBytesUsed
bytes used in USB
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.4.1.1.13
rc2kDeviceGlobalUsbBytesFree
bytes free in USB
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.4.1.1.14
rc2kDeviceGlobalUsbNumFiles
# files in USB
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.15
rc2kDeviceGlobalExtflashBytesUsed
bytes used in Extflash
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.4.1.1.16
rc2kDeviceGlobalExtflashBytesFree
bytes free in Extflash
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.4.1.1.17
rc2kDeviceGlobalExtflashNumFiles
# files in Extflash
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.1.1.18
rc2kDeviceGlobalIntflashBytesUsed
bytes used in intflash. It is used to
replace rc2kDeviceGlobalFlashBytesUsed
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.4.1.1.19
rc2kDeviceGlobalIntflashBytesFree
bytes free in intflash. It is used to
replace rc2kDeviceGlobalFlashByteFree
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.4.1.1.20

rc2kDeviceFlashFileTable

table
.1.3.6.1.4.1.2272.1.100.4.3 · 1 row entry · 4 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kDeviceFlashFileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kDeviceFlashFileTable' 
2k Flash table
rc2kDeviceFlashFileEntry row .1.3.6.1.4.1.2272.1.100.4.3.1
Entry containing infomation of 2k CPU Serial Port
Indexes
Column Syntax OID
rc2kDeviceFlashFileSlot
slot number
Integer32
Constraints:
range: 1-6
 .1.3.6.1.4.1.2272.1.100.4.3.1.1
rc2kDeviceFlashFileName
name of file
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.4.3.1.2
rc2kDeviceFlashFileDate
date
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.100.4.3.1.3
rc2kDeviceFlashFileSize
size in bytes
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.3.1.4

rc2kDevicePcmciaFileTable

table
.1.3.6.1.4.1.2272.1.100.4.5 · 1 row entry · 4 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kDevicePcmciaFileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kDevicePcmciaFileTable' 
2k PCMCIA table
rc2kDevicePcmciaFileEntry row .1.3.6.1.4.1.2272.1.100.4.5.1
Entry containing infomation of 2k CPU Serial Port
Indexes
Column Syntax OID
rc2kDevicePcmciaFileSlot
slot number
Integer32
Constraints:
range: 3-3
range: 5-6
 .1.3.6.1.4.1.2272.1.100.4.5.1.1
rc2kDevicePcmciaFileName
name of file
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.4.5.1.2
rc2kDevicePcmciaFileDate
date
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.100.4.5.1.3
rc2kDevicePcmciaFileSize
size in bytes
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.5.1.4

rc2kDeviceFlash1FileTable

table
.1.3.6.1.4.1.2272.1.100.4.8 · 1 row entry · 4 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kDeviceFlash1FileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kDeviceFlash1FileTable' 
2k Flash1 table
rc2kDeviceFlash1FileEntry row .1.3.6.1.4.1.2272.1.100.4.8.1
Entry containing infomation of 2k Flash1 Files
Indexes
Column Syntax OID
rc2kDeviceFlash1FileSlot
slot number
Integer32
Constraints:
range: 5-6
 .1.3.6.1.4.1.2272.1.100.4.8.1.1
rc2kDeviceFlash1FileName
name of file
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.4.8.1.2
rc2kDeviceFlash1FileDate
date
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.100.4.8.1.3
rc2kDeviceFlash1FileSize
size in bytes
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.4.8.1.4

rc2kDeviceExtflashFileTable

table
.1.3.6.1.4.1.2272.1.100.4.9 · 1 row entry · 4 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kDeviceExtflashFileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kDeviceExtflashFileTable' 
2k Flash table
rc2kDeviceExtflashFileEntry row .1.3.6.1.4.1.2272.1.100.4.9.1
Entry containing information of extflash files
Indexes
Column Syntax OID
rc2kDeviceExtflashFileSlot
slot number
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2272.1.100.4.9.1.1
rc2kDeviceExtflashFileName
name of file
OctetString
Constraints:
range: 1-114
 .1.3.6.1.4.1.2272.1.100.4.9.1.2
rc2kDeviceExtflashFileDate
date
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.100.4.9.1.3
rc2kDeviceExtflashFileSize
size in bytes
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.4.9.1.4

rc2kDeviceUsbFileTable

table
.1.3.6.1.4.1.2272.1.100.4.10 · 1 row entry · 4 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kDeviceUsbFileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kDeviceUsbFileTable' 
2k Usb table
rc2kDeviceUsbFileEntry row .1.3.6.1.4.1.2272.1.100.4.10.1
Entry containing information of USB files
Indexes
Column Syntax OID
rc2kDeviceUsbFileSlot
slot number
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.2272.1.100.4.10.1.1
rc2kDeviceUsbFileName
name of file
OctetString
Constraints:
range: 1-114
 .1.3.6.1.4.1.2272.1.100.4.10.1.2
rc2kDeviceUsbFileDate
date
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.100.4.10.1.3
rc2kDeviceUsbFileSize
size in bytes
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.4.10.1.4

rc2kBootConfigTable

table
.1.3.6.1.4.1.2272.1.100.5 · 1 row entry · 61 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kBootConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kBootConfigTable' 
2k Boot Configuration table
rc2kBootConfigEntry row .1.3.6.1.4.1.2272.1.100.5.1
Entry containing boot configuration information.
Indexes
Column Syntax OID
rc2kBootConfigSlot
slot number, tattoo use 3 as cpu slot,
4 & 7-10 are not valid cpu slot number,
VSP uses slots 1 and 2 for cpu slot
Integer32
Constraints:
range: 1-11
 .1.3.6.1.4.1.2272.1.100.5.1.1
rc2kBootConfigLastBootConfigSource
boot config source
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.2
rc2kBootConfigLastRuntimeImageSource
runtime image source
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.3
rc2kBootConfigLastRuntimeConfigSource
runtime config source
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.4
rc2kBootConfigPrimaryImageSource
image source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.5
rc2kBootConfigPrimaryConfigSource
config source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.6
rc2kBootConfigSecondaryImageSource
image source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.7
rc2kBootConfigSecondaryConfigSource
config source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.8
rc2kBootConfigTertiaryImageSource
image source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.9
rc2kBootConfigTertiaryConfigSource
config source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.10
rc2kBootConfigEnableAutoBoot
auto boot mode
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.11
rc2kBootConfigEnableFactoryDefaults
use factory default
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.12
rc2kBootConfigEnableDebugMode
debug mode
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.13
rc2kBootConfigEnableHwWatchDogTimer
hw watch dog timer
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.14
rc2kBootConfigEnableRebootOnError
reboot on error
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.15
rc2kBootConfigEnableTelnetServer
telnet server
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.16
rc2kBootConfigEnableRloginServer
rlogin server
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.17
rc2kBootConfigEnableFtpServer
ftp server
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.18
rc2kBootConfigEnableTftpServer
tftp server
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.19
rc2kBootConfigSwVersion
current sw version
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2272.1.100.5.1.20
rc2kBootConfigMulticastConfigProfile
multicast config
Integer32
Constraints:
range: 1-6
 .1.3.6.1.4.1.2272.1.100.5.1.21
rc2kBootConfigEnableSshServer
ssh server
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.22
rc2kBootConfigEnableAltLed
Boot flag for enableing Alternate LED
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.23
rc2kBootConfigPrimaryBackupConfigSource
primary backup config source (save config)
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.24
rc2kBootConfigSecondaryBackupConfigSource
secondary backup config source (save config)
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.25
rc2kBootConfigTertiaryBackupConfigSource
tertiary backup config source (save config)
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.26
rc2kBootConfigEnable8616ReAutoneg
Enable re-autoneg for 8616SX Cards (Intel GMAC fix)
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.27
rc2kBootConfigMezzImageSource
Mezz image source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.28
rc2kBootConfigEnableMezz
Enable/disable Mezz Flag
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.29
rc2kBootConfigPrimaryLicenseSource
Primary choice for the license source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.30
rc2kBootConfigSecondaryLicenseSource
Secondary choice for the license source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.31
rc2kBootConfigTertiaryLicenseSource
Tertiary choice for the license source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.32
rc2kBootConfigUnknownDstMacDiscardobsolete
Enable/disable to discard the unknown destination
mac address. A device reboot is required for the
change to take effect.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.33
rc2kBootConfigUnknownDstMacDiscardOperStatusobsolete
Indicates the device operational status of unknown
destination mac discard.
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2272.1.100.5.1.34
rc2kBootConfigEnableAutoAssignIp
Enable/disable auto-assign-ip feature
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.35
rc2kBootConfigUpgradeBootImageSource
Upgrade boot image source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.36
rc2kBootConfigUpgradeRuntimeImageSource
Upgrade runtime image source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.37
rc2kBootConfigUpgradeMezzImageSource
Upgrade mezz image source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.38
rc2kBootConfigUpgradeConfigSource
Upgrade config source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.39
rc2kBootConfigUpgradeRModImageSource
upgrade RMod image source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.40
rc2kBootConfigUpgradeRCModImageSource
upgrade RCMod image source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.41
rc2kBootConfigUpgradeESMImageSource
upgrade ESM image source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.42
rc2kBootConfigFallBackBootImageSource
upgrade fall-back boot monitor source
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.5.1.43
rc2kBootConfigEnableCfPcCompat
Enable/disable CF PC compatibility
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.44
rc2kBootConfigLinecardCompatibilityMode
This indicates the compatibility mode of the IO cards
on the Chassis. In gen1 mode, both the generation 1
cards and generation 2 (ROF) cards will be supported
and the max number of FIB records will be set to 500K.
In…
Enumerationr/w
Enumerated Values:
1gen1
2gen2
 .1.3.6.1.4.1.2272.1.100.5.1.45
rc2kBootConfigEnableSpbmConfigMode
Enables spbm-config-mode boot flag. When this flag
is true, SPBM configurations are allowed and PIM
configurations are disabled and not allowed.
When this flag is false, PIM configurations
are allowed and SPBM configura…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.46
rc2kBootConfigEnableIpv6Mode
Enable/disable Ipv6-Mode Flag.This flag is
used only for VSP8200 and VSP4k because of the
limitation in Trident2 where Ipv6 route with
prefix-length >64 cannot be stored in the L3_defip
table.Setting of this flag will c…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.47
rc2kBootConfigEnableEnhancedsecureMode
Enable/disable Federal Mode Flag
Enumerationr/w
Enumerated Values:
1jitc
2disable
3non-jitc
 .1.3.6.1.4.1.2272.1.100.5.1.48
rc2kBootConfigEnableUrpfMode
From VOSS5.x onwards, unicast reverse path
forwarding will be supported on small system
platforms only if this flag is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.49
rc2kBootConfigEnableFlowControlMode
Enable/disable Flow Control Mode Flag.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.50
rc2kBootConfigAdvancedFeatureBwReservation
Allow to enable the port forwarding bandwidth working
as loopback ports to support advanced feature mode,
or disable the reservation for full port mode. Enable can be
in levels of high and low. In level of high, the sys…
Enumerationr/w
Enumerated Values:
1disable
2high
 .1.3.6.1.4.1.2272.1.100.5.1.51
rc2kBootConfigEnableVxlanGwFullInterworkingMode
Enables vxlan gateway full interworking mode.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.52
rc2kBootConfigNniMstp
Flag to decide whether configuration of mstp and other
vlans on the NNI is allowed. Default is not allowed.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.53
rc2kBootConfigEnableDvrLeafMode
DVR can be configured as controller or leaf. IP
related configuration and show commands are not
allowed on leaf. dvr-leaf-mode flag has to be
enabled first before user can configure as DVR leaf.
When boot up with this …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.54
rc2kBootConfigEnablevrfScaling
Flag to Enable or Disable vrf scaling.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.55
rc2kBootConfigLinerateDirectedBroadcast
Flag to Enable or Disable Linerate Directed Broadcast.
With this flag set, IP directed broadcast will operate
at linerate. Without this flag, all IP directed broadcast
is handled in legacy mode by the CP and is limited …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.56
rc2kBootConfigVcMode
Flag to Enable or Disable Virtual Chassis mode.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.57
rc2kBootConfigEnableIpv6EgressFilterMode
Flag to enable or disable the IPV6 egress filter
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.58
rc2kBootConfigEnableSyslogRfc5424Format
Flag to enable or disable the syslog output format.
Enable will align syslog format with RFC 5424.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.5.1.59
rc2kBootConfigEnableFactoryDefaultsMode
Set Factory default boot wiht option. This object is used to
deprecate and obsolete the rc2kBootConfigEnableFactoryDefaults
disable(1): System boot up with no default configuration.
fabric(2): System boot up with def…
Enumerationr/w
Enumerated Values:
1false
2fabric
3noFabric
 .1.3.6.1.4.1.2272.1.100.5.1.60
rc2kBootConfigInsightPortConnectType
This object indicates the desired insight port connect type
of the system.
The valid values are:
vtd(1)
ovs-sriov(2)
Note that changing the insight port connect type configuration
will result in config b…
Enumerationr/w
Enumerated Values:
1vtd
2ovs-sriov
 .1.3.6.1.4.1.2272.1.100.5.1.61

rc2kCardTable

table
.1.3.6.1.4.1.2272.1.100.6 · 1 row entry · 35 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kCardTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kCardTable' 
2k Card table
rc2kCardEntry row .1.3.6.1.4.1.2272.1.100.6.1
Entry containing information of 2k Card
Indexes
Column Syntax OID
rc2kCardIndex
slot number.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.100.6.1.1
rc2kCardFrontType
Used to indicate card types in the Accelar
8000 product families.

For Accelar 8000 devices, all cards use
an encoded value according to the following rule:

Exampe:
Titan VSP7400-(p…
Enumeration
Enumerated Values:
1other
537788672rc2kCPU
537792768rc2kCPURed
539033880rc2k24x100BaseTX
539033888rc2k32x100BaseTX
539033904rc2k48x100BaseTX
539099400rc2k8x1000BaseT
539099408rc2k16x1000BaseT
540082456rc2k24x100BaseFX
540147976rc2k8x1000BaseSXBB
540147984rc2k16x1000BaseSXBB
540156168rc2k8x1000BaseLXBB
540164360rc2k8x1000BaseXDBB
540168452rc2k4x1000BaseOPM
540168456rc2k8x1000BaseIC
540168464rc2k16x1000BaseIC
540180744rc2k8x1000BaseSXRBB
540188936rc2k8x1000BaseLXRBB
541327624rc2k8xOC3
541393154rc2k2xOC12
541401350rc2k6xPOS
542441732rc2k4xATM
542441736rc2k8xATM
545128704rc2kRMON
572588320rc2k32x100BaseTXM
572588336rc2k48x100BaseTXM
572653832rc2k8x1000BaseTM
573702408rc2k8x1000BaseSXBBM
573722888rc2k8x1000BaseICM
573767937rc2k1x10GBaseLW
573784321rc2k1x10GBaseLR
574955782rc2k6xPOSM
575996168rc2k8xATMM
606208304rc2kPR48X1000BaseTX
606241072rc2kPR48x1000BaseGTRS
607277338rc2kPR26xXGRS
607277342rc2kPR30X1000BaseSXBB
607277346rc2kPR34xXGRS
607277360rc2kPR48x1000BaseGBRS
607310110rc2kPR30x1000BaseGBRS
607310128rc2kPR48x1000BaseGXRS
607338755rc2kPR3X10GBaseGbic
607338758rc2kPR6X10GBaseXLRS
607338764rc2kPR12X10GBaseXLRS
607346947rc2kPR3X10GBaseXZW
607346956rc2kPR12X10GBaseXLRSJ
631406896rc2kPRE48x1000BaseGT
632443170rc2kPRE34xXG
632443184rc2kPRE48x1000BaseGB
632504588rc2kPRE12X10GBaseXL
632512780rc2kPRE12X10GBaseXLJ
807469360rc2kMg48x100BaseTX
807473440rc2kMg32x100BaseTX
808522000rc2kMg16x100BaseFX
808583432rc2kMg8x1000BaseTX
808603912rc2kMg8x1000BaseIC
817955120rc2kMg48x100BaseTC
895778868netApp8016QQ
895779892dsg8016QQ
1008861208vsp1100
1030946824xa1400
1073807408rc2kCobra48x100BaseT
1073872908rc2kCobra12x1000BaseG
1073872920rc2kCobra24x1000BaseG
1073873665cbCP-CSC
1075708672cbSF3200
1075712768cbSF9600
1075712769cbSF9610
1075970864cb48x1000BaseTX
1075974960cb48x1000BaseTXPOE
1077039368rc2k8x1000BaseOPM
1077044016cb48x1000SFP
1077109528cb24x10GBaseSFP
1077109552cb48x10GBaseSFP
1084097280cbACPowerSupply
1084130048cbACPowerPlusSupply
1085145856cbCPFanTray
1085149952cbIOFanTray
1085154048cbFanTray
1085158144cbHSFanTray
1090388736cbMidplane-28
1090388737cbMidplaneSapphire
1091437312cbAUX
1144152832rofLoadBoard
1144152880rof48x1000SFP
1144218384rof16x10GBaseSFP
1144218416rof48x10GBaseSFP
1144283920rof4x40GBaseSFP
1144283952rof12x40GBaseSFP
1231224882vsp4k4450GSX
1231225906dsg6248GSX
1231228978vsp4k4450GSXPWRPLUS
1232273458vsp4k4850GTS
1232274482dsg6248GTS
1232277554vsp4k4850GTSPWRPLUS
1232278578dsg6248GTSPWRPLUS
1232279602vsp4k4450GTXHTPWRPLUS
1293136408vsp8k8424XT
1294107160vsp8k8424GT
1294184496vsp7k7248XT
1294185520dsg7048XT
1298326040vsp8k8424GS
1298378800vsp7k7248XS
1298379288vsp8k8424XS
1298379824dsg7048XS
1298407466vsp8k8242XSQ
1298408490dsg7240XSQ
1298432024vsp7k7206QQ
1298432544vsp8k8408QQ
1298433048dsg7006QQ
1298461208vsp8k8418XSQ
1298498050vsp8k8402CQ
1299509784vsp8k8418XTQ
1331823105vsp8k8404
1331839489vsp8k8404C
1332072496vsp7432CQ
1332073474vsp10GInsight
1332073480vsp7400x8C
1332138032vsp740048Y8C
1342316808rc2kPP8300-CPU8x1000BaseSFP
1342390530rc2kPP8300-CPU2x10GBaseXFP
1344340272rc2kPP8300-48x100BaseTX
1344344368rc2kPP8300-48x100BaseTXPOE
1344405784rc2kPP8300-24x1000BaseTX
1344422192rc2kPP8300-48x1000BaseTX-4B
1344426288rc2kPP8300-48x1000BaseTXPOE-4B
1345388824rc2kPP8300-24x100BaseFX
1345454384rc2kPP8300-48x1000BaseSFP-2B
1345519880rc2kPP8300-8x10GBaseXFP-4B
1360142600rc2kPP8300-CPU8x1000BaseSFP256
1411293440vsp8600SF
1445167384vsp8624XT
1446215960vsp8624XS
1446281500vsp8616QQ
1446347032vsp8606CQ
1458700545vsp8608
1893859592rc2kAlteonLP
1899102468rc2kAlteonWSM
1899106564rc2kAlteonASFM
1926365441rc2k61AlteonSAM
1926369537rc2k62AlteonSAM
2036564484vsp4900x4x
2036568580vsp4900x4xLM
2036630018vsp4900x2q
2036761090vsp4900x2v
2036765188vsp4900x4vLM
2065862680vsp4900x24P
2065862704vsp4900x48P
2103681540voss5520x4XE
2103685636voss5520x4X
2103869956voss5520x4YE
2137317402voss5520x24X
2137317426voss5520x48SE
2138341402voss5520x24T
2138341426voss5520x48T
2138345498voss5520x24W
2138345522voss5520x48W
2138370098voss5520x12MW36W
 .1.3.6.1.4.1.2272.1.100.6.1.2
rc2kCardFrontDescription
description
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.3
rc2kCardFrontAdminStatus
Used to indicate the administrative status of this
card
Enumerationr/w
Enumerated Values:
1up
2down
3testing
4reset
 .1.3.6.1.4.1.2272.1.100.6.1.4
rc2kCardFrontOperStatus
Used to indicate the operational status of this card.
Enumeration
Enumerated Values:
1up
2down
3testing
4unknown
5dormant
6upMaster
7upDormant
8upWarmStandby
9downMismatch
 .1.3.6.1.4.1.2272.1.100.6.1.5
rc2kCardFrontSerialNum
serial number of card
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.6
rc2kCardFrontHwVersion
hardware version
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.7
rc2kCardFrontPartNumber
part number
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.8
rc2kCardFrontDateCode
date code
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.9
rc2kCardFrontDeviations
deviations
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.10
rc2kCardFrontMacAddrobsolete
base mac address
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2272.1.100.6.1.11
rc2kCardBackType
Refer to rc2kCardFrontType for the encoding scheme
Enumeration
Enumerated Values:
1other
536969472rc2kBackplane
538837248rc2kSFM
546177280rc2kBFM0
546177282rc2kBFM2
546177283rc2kBFM3
546177286rc2kBFM6
546177288rc2kBFM8
605946112rc2kFSFM
613351682rc2kDPM2
613351690rc2kEDPM2
613351861rc2kDPM1
613351863rc2kDPM3
613351871rc2kEDPM3
630128906rc2kEEDPM2
630129087rc2kEEDPM3
807272704rc2kMGSFM
1888354564rc2kBFM4
 .1.3.6.1.4.1.2272.1.100.6.1.12
rc2kCardBackDescription
description
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.13
rc2kCardBackSerialNum
serial number of card
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.14
rc2kCardBackHwVersion
hardware version
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.15
rc2kCardBackPartNumber
part number
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.16
rc2kCardBackDateCode
date code
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.17
rc2kCardBackDeviations
deviations
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.18
rc2kCardPCMCIAType
Used to indicate the type of PCMCIA card currently
installed in this CPU card, if any.

For non-CPU cards, this variable has no meaning and
will always be set to none(1).
Enumeration
Enumerated Values:
1none
2modemCard
3ethernetCard
4ataDisk
 .1.3.6.1.4.1.2272.1.100.6.1.19
rc2kCardPCMCIADescr
PCMCIA descriptor
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.100.6.1.20
rc2kCardASICDescr
ASIC descriptor
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.100.6.1.21
rc2kCardFrontMasterIO
Used to indicate whether an IO card in a 8100 device
is operating in the 'master' mode.

This variable is not meaningful for non-IO cards and
non-8100 devices.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.6.1.22
rc2kCardSmltOnSingleCpSupported
Used to indicate whether an IO card is updated to
support SMLT on single Cp feature or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.6.1.23
rc2kCardMezzCard
Used to indicate the CPU Mezz card
Enumeration
Enumerated Values:
1unsupported
2notpresent
3present
4running
 .1.3.6.1.4.1.2272.1.100.6.1.24
rc2kCardFrontPoeOperStatus
Used to indicate the operational status of this card.
Enumeration
Enumerated Values:
1up
2down
3testing
4unknown
5dormant
6failure
 .1.3.6.1.4.1.2272.1.100.6.1.25
rc2kCardMezzSerialNum
Used to get the serial number of the mezz
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.26
rc2kCardMezzHwVersion
Used to get the HW version of the mezz. The
value of HW Version corresponds to the value of
part number.
Enumeration
Enumerated Values:
0undefined
1e0
2e1
3e2
4e3
5e4
6e5
7e6
8e7
 .1.3.6.1.4.1.2272.1.100.6.1.27
rc2kCardMezzPartNum
Used to get the part number of the mezz. The
value of part number corresponds to the value of
HW Version.
Enumeration
Enumerated Values:
0undefined
1p120616
2p120618
3p120617
4p120615
5p120724
6p120672
7p120851
8p120939
 .1.3.6.1.4.1.2272.1.100.6.1.28
rc2kCardSlotPriority
Used to indicate the priority of the slot for power
management.It will take effect only after reboot.
Enumerationr/w
Enumerated Values:
1critical
2high
3low
 .1.3.6.1.4.1.2272.1.100.6.1.29
rc2kCardSlotOriginalPriority
Priority of the slot for power management which the
swtich has currently booted with. It will remain the
same until the next reboot.
Enumeration
Enumerated Values:
1critical
2high
3low
 .1.3.6.1.4.1.2272.1.100.6.1.30
rc2kCardMode
Used to indicate the single port or dual port is
using
Enumerationr/w
Enumerated Values:
1singleport
2dualport
 .1.3.6.1.4.1.2272.1.100.6.1.31
rc2kCardSlotPower
Administrately turn on or off power on this slot.
it only applicable on Standby CP & IO and SF Card
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2272.1.100.6.1.32
rc2kCardModuleSerialNum
Module serial number.
It is only applicable to the RS module. And it is not
applicable to old version of the R module and CP
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.33
rc2kCardModulePartNumber
Module part number.
It is only applicable to the RS module. And it is not
applicable to old version of the R module and CP
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.34
rc2kCardModuleAssemblyDate
Module assemly date.
It is only applicable to the RS module. And it is not
applicable to old version of the R module and CP
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.6.1.35

rc2kMdaCardTable

table
.1.3.6.1.4.1.2272.1.100.10 · 1 row entry · 15 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kMdaCardTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kMdaCardTable' 
Mda card table
rc2kMdaCardEntry row .1.3.6.1.4.1.2272.1.100.10.1
Entry containing infomation of Mda card
Indexes
Column Syntax OID
rc2kMdaCardSlotNum
Slot number
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.2272.1.100.10.1.1
rc2kMdaCardMdaNum
MDA number within slot. MDAs are numbered
from left to right.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.2272.1.100.10.1.2
rc2kMdaCardType
Refer to rc2kCardFrontType for the encoding scheme
Enumeration
Enumerated Values:
1other
541327874rc2k2xOc3PosBaseMMF
541331970rc2k2xOc3PosBaseSMF
541393409rc2k1xOc12PosBaseMMF
541397505rc2k1xOc12PosBaseSMF
542376452rc2k4xOc3cBaseMM
542380548rc2k4xOc3cBaseSM
542388740rc2k4xOc3cBaseCOPPER
542441985rc2k1x0c12cBaseMM
542446081rc2k1x0c12cBaseSM
542839298rc2k2xE3
542970370rc2k2xDs3
807469572rc2k4x100BaseTX
808518146rc2k2x100BaseFX
808518148rc2k4x100BaseFX
808583681rc2k1x1000BaseSXBB
808591873rc2k1x1000BaseLXBB
808616449rc2k1x1000BaseSXRBB
808624641rc2k1x1000BaseLXRBB
 .1.3.6.1.4.1.2272.1.100.10.1.3
rc2kMdaCardDescription
description of mda card
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2272.1.100.10.1.4
rc2kMdaCardAdminStatus
administration status of mda card
Enumerationr/w
Enumerated Values:
0up
1down
2testing
3unknown
 .1.3.6.1.4.1.2272.1.100.10.1.5
rc2kMdaCardOperStatus
operation status of mda card.
Enumeration
Enumerated Values:
0up
1down
2testing
3unknown
 .1.3.6.1.4.1.2272.1.100.10.1.6
rc2kMdaCardSerialNum
serial number of mad card
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2272.1.100.10.1.7
rc2kMdaCardHwVersion
hardware version of mda card
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2272.1.100.10.1.8
rc2kMdaCardPartNumber
part number of mda card
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2272.1.100.10.1.9
rc2kMdaCardDateCode
date code of mda card
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2272.1.100.10.1.10
rc2kMdaCardDeviations
hardware deviation infomation of mda card
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2272.1.100.10.1.11
rc2kMdaCardMacAddr
base mac address of mda card
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2272.1.100.10.1.12
rc2kMdaCardNumPorts
number of ports on mda card
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.10.1.13
rc2kMdaCardFirstIfIndex
first ifindex number on mda card
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2272.1.100.10.1.14
rc2kMdaCardLastIfIndex
last ifindex number on mda card
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2272.1.100.10.1.15

rc2kCpuEthernetPortRouteTable

table
.1.3.6.1.4.1.2272.1.100.11 · 1 row entry · 3 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kCpuEthernetPortRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kCpuEthernetPortRouteTable' 
2k CPU Ethernet Port Route table
rc2kCpuEthernetPortRouteEntry row .1.3.6.1.4.1.2272.1.100.11.1
Entry containing infomation of 2k CPU Ethernet Port
Indexes
Column Syntax OID
rc2kCpuEthernetPortRouteNetwork
Used to configure the network that can be
used to remotely manage this device.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.100.11.1.1
rc2kCpuEthernetPortRouteGateway
Used to configure the the IP address of the
gateway that should be used to forward IP
traffic.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.100.11.1.2
rc2kCpuEthernetPortRouteRowStatus
row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.100.11.1.3

rc2kCpuEthernetPortIpv6RouteTable

table
.1.3.6.1.4.1.2272.1.100.13 · 1 row entry · 4 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kCpuEthernetPortIpv6RouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kCpuEthernetPortIpv6RouteTable' 
2k CPU Ethernet Port Route table for Ipv6
rc2kCpuEthernetPortIpv6RouteEntry row .1.3.6.1.4.1.2272.1.100.13.1
Entry containing information of 2k CPU Ethernet Port Ipv6
Indexes
Column Syntax OID
rc2kCpuEthernetPortIpv6RouteNetwork
Used to configure the ipv6 network that can be used to remotely manage this device.
IPV6-TCIpv6Address
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.100.13.1.1
rc2kCpuEthernetPortIpv6RoutePrefixLength
The length of the prefix (in bits).
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.2272.1.100.13.1.2
rc2kCpuEthernetPortIpv6RouteGateway
Used to configure the the IPv6 address of the gateway that should be used to forward IPv6 traffic.
IPV6-TCIpv6Address
Type Constraints:
range: 16
 .1.3.6.1.4.1.2272.1.100.13.1.3
rc2kCpuEthernetPortIpv6RouteRowStatus
row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.100.13.1.4

rc2kCardModTable

table
.1.3.6.1.4.1.2272.1.100.14 · 1 row entry · 11 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kCardModTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kCardModTable' 
RTM info table
rc2kCardModEntry row .1.3.6.1.4.1.2272.1.100.14.1
Entry containing RTM information
Indexes
Column Syntax OID
rc2kCardModIndex
slot number.
Integer32
Constraints:
range: 1-11
 .1.3.6.1.4.1.2272.1.100.14.1.1
rc2kCardModPresent
Indicates if the RTM in this slot is present
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.14.1.2
rc2kCardModType
RTM type
Enumeration
Enumerated Values:
1other
1627259136cpu56
1627263232cpur
1627267328lc
 .1.3.6.1.4.1.2272.1.100.14.1.3
rc2kCardModDescription
RTM description
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.14.1.4
rc2kCardModSerialNum
RTM serial number
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.14.1.5
rc2kCardModHwVersion
RTM hardware version
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.14.1.6
rc2kCardModPartNumber
RTM part number
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.14.1.7
rc2kCardModDateCode
RTM date code
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.14.1.8
rc2kCardModDeviations
RTM deviations
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.14.1.9
rc2kCardModCpldId
RTM CPLD ID value
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.14.1.10
rc2kCardModCpldRev
RTM CPLD revision value
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.14.1.11

rc2kCardPerfTable

table
.1.3.6.1.4.1.2272.1.100.15 · 1 row entry · 5 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kCardPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kCardPerfTable' 
This table represents the Card/Slot level DRAM
size, DRAM Used, DRAM Free and CPU Utilization
for the R Module and RC Module cards
rc2kCardPerfEntry row .1.3.6.1.4.1.2272.1.100.15.1
Entry containing information of Card performance
Indexes
Column Syntax OID
rc2kCardPerfId
This represents the slot number.
This is only for line cards, slot 5 and 6 should not be used.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.2272.1.100.15.1.1
rc2kCardPerfDramSize
This represents DRAM Size in Mega bytes
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.15.1.2
rc2kCardPerfDramUsed
This represents the amount of DRAM used in kilo bytes
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.15.1.3
rc2kCardPerfDramFree
This represents the amount of DRAM Free in kilo bytes
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.15.1.4
rc2kCardPerfCPUUtilization
This represents the percentage of CPU utilization
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.15.1.5

rc2kSysAggrRateLimiterStatsTable

table
.1.3.6.1.4.1.2272.1.100.16 · 1 row entry · 14 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kSysAggrRateLimiterStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kSysAggrRateLimiterStatsTable' 
This table represents the Card/Slot level Aggregate rate limiter stats for power ranger cards.
rc2kSysAggrRateLimiterStatsEntry row .1.3.6.1.4.1.2272.1.100.16.1
Card/Slot level Aggregate rate limiter stats for power ranger cards indexed by slot number
Indexes
Column Syntax OID
rc2kSysAggrRateLimiterStatsId
This represents the slot number. This is only for line cards, slot 5 and 6 should not be used.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.2272.1.100.16.1.1
rc2kSysAggrRateLimiterIngGreenLane0
Number of packets passed or marked green by the Ingress Aggregate rate limiter
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.16.1.2
rc2kSysAggrRateLimiterIngRedLane0
Number of packets dropped or marked red by the Ingress Aggregate rate limiter
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.16.1.3
rc2kSysAggrRateLimiterEgrGreenLane0
Number of packets passed or marked green by the Egress Aggregate rate limiter
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.16.1.4
rc2kSysAggrRateLimiterEgrRedLane0
Number of packets dropped or marked red by the Egress Aggregate rate limiter
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.16.1.5
rc2kSysAggrRateLimiterIngGreenLane1
Number of packets passed or marked green by the Ingress Aggregate rate limiter
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.16.1.6
rc2kSysAggrRateLimiterIngRedLane1
Number of packets dropped or marked red by the Ingress Aggregate rate limiter
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.16.1.7
rc2kSysAggrRateLimiterEgrGreenLane1
Number of packets passed or marked green by the Egress Aggregate rate limiter
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.16.1.8
rc2kSysAggrRateLimiterEgrRedLane1
Number of packets dropped or marked red by the Egress Aggregate rate limiter
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.16.1.9
rc2kSysAggrRateLimiterIngGreenLane2
Number of packets passed or marked green by the Ingress Aggregate rate limiter
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.16.1.10
rc2kSysAggrRateLimiterIngRedLane2
Number of packets dropped or marked red by the Ingress Aggregate rate limiter
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.16.1.11
rc2kSysAggrRateLimiterEgrGreenLane2
Number of packets passed or marked green by the Egress Aggregate rate limiter
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.16.1.12
rc2kSysAggrRateLimiterEgrRedLane2
Number of packets dropped or marked red by the Egress Aggregate rate limiter
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.16.1.13
rc2kSysAggrRateLimiterStatsClear
Clear the Aggregate Rate limiter Stats
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.16.1.14

rc2kPowerConsumptionInfoTable

table
.1.3.6.1.4.1.2272.1.100.17 · 1 row entry · 7 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kPowerConsumptionInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kPowerConsumptionInfoTable' 
Power consumption info table for all slots
rc2kPowerConsumptionInfoEntry row .1.3.6.1.4.1.2272.1.100.17.1
Entry containing power consumption information of
the slot
Indexes
Column Syntax OID
rc2kPowerConsumptionInfoIndex
Slot number.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2272.1.100.17.1.1
rc2kPowerConsumptionInfoPowerStatus
Power operation status of this slot
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2272.1.100.17.1.2
rc2kPowerConsumptionInfoBasePower
The base power required for this slot
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.17.1.3
rc2kPowerConsumptionInfoConsumedPower
The actual consumed power of this slot.
Value will be set zero when Power status is 'off'
rc2kPowerConsumptionInfoPowerStatus
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.17.1.4
rc2kPowerConsumptionInfoPowerPriority
Used to indicate the priority of the slot for power
management
Enumeration
Enumerated Values:
1critical
2high
3low
 .1.3.6.1.4.1.2272.1.100.17.1.5
rc2kPowerConsumptionInfoSlotDescription
User to indicate the slot type information.
Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etc
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.17.1.6
rc2kPowerConsumptionInfoCardDescription
Hardware description of this card
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.17.1.7

rc2kTemperatureTable

table
.1.3.6.1.4.1.2272.1.100.18 · 1 row entry · 11 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kTemperatureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kTemperatureTable' 
Table for retrieving the temperatures 
of each card (CP, IO, SF) on the chassis
rc2kTemperatureEntry row .1.3.6.1.4.1.2272.1.100.18.1
Contains information regarding the temperature of
each slot (CP, IO and SF) on the chassis.
Indexes
Column Syntax OID
rc2kTemperatureSlotIndex
Slot number of either a CP (1,2) or IO (3-12)
or SF (21-26).
Integer32
Constraints:
range: 1-12
range: 21-26
 .1.3.6.1.4.1.2272.1.100.18.1.1
rc2kTemperatureSlotDescription
Used to indicate the slot type information.
Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etc.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.18.1.2
rc2kTemperatureZone1Temperature
Zone 1 temperature measured in celsius degree
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.3
rc2kTemperatureZone2Temperature
Zone 2 temperature measured in celsius degree.
A value of 0 for this mib object indicates that
Zone 2 is not available on this slot.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.4
rc2kTemperatureZone3Temperature
Zone 3 temperature measured in celsius degree.
A value of 0 for this mib object indicates that
Zone 3 is not available on this slot.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.5
rc2kTemperatureZone4Temperature
Zone 4 temperature measured in celsius degree
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.6
rc2kTemperatureZone5Temperature
Zone 5 temperature measured in celsius degree.
A value of 0 for this mib object indicates that
Zone 5 is not available on this slot.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.7
rc2kTemperatureHighTemperature
Highest temperature measured in celsius degree
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.8
rc2kTemperatureLowTemperature
Lowest temperature measured in celsius degree
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.9
rc2kTemperatureAlarmThreshold
When the card temperature crosses this
threshold, an alarm will be set.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.10
rc2kTemperatureShutdownThreshold
When the card temperature crosses this
threshold, the card will be shutdown.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.18.1.11

rc2kUsbTable

table
.1.3.6.1.4.1.2272.1.100.19 · 1 row entry · 9 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kUsbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kUsbTable' 
Table for retrieving the data for
the USBs inserted on the chassis
rc2kUsbEntry row .1.3.6.1.4.1.2272.1.100.19.1
Contains information regarding the data for
USBs inserted on the chassis
Indexes
Column Syntax OID
rc2kUsbSlotIndex
Slot number of CP in which USB is inserted.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2272.1.100.19.1.1
rc2kUsbSlotDescription
Used to indicate the slot type information.
Such as, 'Slot1'..'Slot2.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.19.1.2
rc2kUsbVendorId
Indicates the Vendor Id for the inserted USB.
Value is assigned by USB-IF.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.100.19.1.3
rc2kUsbManufacturer
Indicates the Manufacturer for the inserted USB.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.100.19.1.4
rc2kUsbProductId
Indicates the Product Id for the inserted USB.
Value is assigned by manufacturer.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.100.19.1.5
rc2kUsbProductName
Indicates the Product Name for the inserted USB.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.100.19.1.6
rc2kUsbSerialNumber
Indicates the Serial Number for the inserted USB.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.100.19.1.7
rc2kUsbRevision
Indicates the release number for the inserted USB.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2272.1.100.19.1.8
rc2kUsbMaxCurrent
Returns the Max Power as defined by specification
for the inserted USB. The units are milliamps.
milliampsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.19.1.9

rc2kCardAsicInfoTable

table
.1.3.6.1.4.1.2272.1.100.20 · 1 row entry · 6 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kCardAsicInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kCardAsicInfoTable' 
A table that contains asic information that 
is specific to a forwarding slice on a 
second generation IO module.
rc2kCardAsicInfoEntry row .1.3.6.1.4.1.2272.1.100.20.1
Second Generation Card attributes
Indexes
Column Syntax OID
rc2kCardAsicInfoIndex
A unique value for each module within the chassis.
This value is determined by the chassis slot number
where the module is inserted. Valid entries are 3
to the value of rcChasNumSlots
Integer32
Constraints:
range: 3-12
 .1.3.6.1.4.1.2272.1.100.20.1.1
rc2kCardAsicInfoForwardingSlice
A unique value for each forwarding slice on the card.
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.2272.1.100.20.1.2
rc2kCardAsicInfoQE
QE version for the forwarding slice on IO card
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.20.1.3
rc2kCardAsicInfoZagrosFpga
Zagros FPGA for the forwarding slice on IO card
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.20.1.4
rc2kCardAsicInfoRsp
RSP for the forwarding slice on IO card
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.20.1.5
rc2kCardAsicInfoPhyRev
PHY revision for the forwarding slice on IO card
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2272.1.100.20.1.6

rc2kIoCardTemperatureTable

table
.1.3.6.1.4.1.2272.1.100.21 · 1 row entry · 21 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kIoCardTemperatureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kIoCardTemperatureTable' 
Table for retrieving the temperatures of the sensors
located on the FPGA's and FA's on the generation 2
IO cards.
rc2kIoCardTemperatureEntry row .1.3.6.1.4.1.2272.1.100.21.1
Contains information regarding the temperatures of
FPGA's and FA's on the generation 2 IO cards.
Indexes
Column Syntax OID
rc2kIoCardTemperatureSlotIndex
Slot number of the IO card
Integer32
Constraints:
range: 3-12
 .1.3.6.1.4.1.2272.1.100.21.1.1
rc2kIoCardTemperatureFPGASensor1Temperature
Temperature of the FPGA Sensor 1, located on the
Zagros on the first slice, measured in celsius degrees.
A value of 0 for this mib object indicates that this
sensor is not available on this slot.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.2
rc2kIoCardTemperatureFPGASensor2Temperature
Temperature of the FPGA Sensor 2, located on the
Zagros on the first slice, measured in celsius degrees.
A value of 0 for this mib object indicates that this
sensor is not available on this slot.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.3
rc2kIoCardTemperatureFPGASensor3Temperature
Temperature of the FPGA Sensor 3, located on the
RSP on the first slice, measured in celsius degrees.
A value of 0 for this mib object indicates that this
sensor is not available on this slot.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.4
rc2kIoCardTemperatureFPGASensor4Temperature
Temperature of the FPGA Sensor 4, located on the
Zagros on the second slice, measured in celsius degrees.
A value of 0 for this mib object indicates that this
sensor is not available on this slot.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.5
rc2kIoCardTemperatureFPGASensor5Temperature
Temperature of the FPGA Sensor 5, located on the
Zagros on the second slice, measured in celsius degrees.
A value of 0 for this mib object indicates that this
sensor is not available on this slot.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.6
rc2kIoCardTemperatureFPGASensor6Temperature
Temperature of the FPGA Sensor 6, located on the
RSP on the second slice, measured in celsius degrees.
A value of 0 for this mib object indicates that this
sensor is not available on this slot.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.7
rc2kIoCardTemperatureFPGASensor7Temperature
Temperature of the FPGA Sensor 7, located on the
Zagros on the third slice, measured in celsius degrees.
A value of 0 for this mib object indicates that this
sensor is not available on this slot.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.8
rc2kIoCardTemperatureFPGASensor8Temperature
Temperature of the FPGA Sensor 8, located on the
Zagros on the third slice, measured in celsius degrees.
A value of 0 for this mib object indicates that this
sensor is not available on this slot.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.9
rc2kIoCardTemperatureFPGASensor9Temperature
Temperature of the FPGA Sensor 9, located on the
RSP on the third slice, measured in celsius degrees.
A value of 0 for this mib object indicates that this
sensor is not available on this slot.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.10
rc2kIoCardTemperatureFPGAZoneHighTemperature
Highest temperature of all the FPGA sensors located
on this IO card, measured in celsius degrees.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.11
rc2kIoCardTemperatureFPGAZoneLowTemperature
Lowest temperature of all the FPGA sensors located
on this IO card, measured in celsius degrees.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.12
rc2kIoCardTemperatureFPGAZoneAlarmThreshold
When the FPGA temperature crosses this threshold
on this IO card, an alarm will be set.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.13
rc2kIoCardTemperatureFPGAZoneShutdownThreshold
When the FPGA temperature crosses this threshold
on this IO card, the card will be shutdown.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.14
rc2kIoCardTemperatureFASensor1Temperature
Temperature of the FA Sensor 1, located on the
first slice, measured in celsius degrees.
A value of 0 for this mib object indicates that this
sensor is not available on this slot.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.15
rc2kIoCardTemperatureFASensor2Temperature
Temperature of the FA Sensor 2, located on the
second slice, measured in celsius degrees.
A value of 0 for this mib object indicates that this
sensor is not available on this slot.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.16
rc2kIoCardTemperatureFASensor3Temperature
Temperature of the FA Sensor 3, located on the
third slice, measured in celsius degrees.
A value of 0 for this mib object indicates that this
sensor is not available on this slot.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.17
rc2kIoCardTemperatureFAZoneHighTemperature
Highest temperature of all the FA sensors located
on this IO card, measured in celsius degrees.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.18
rc2kIoCardTemperatureFAZoneLowTemperature
Lowest temperature of all the FA sensors located
on this IO card, measured in celsius degrees.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.19
rc2kIoCardTemperatureFAZoneAlarmThreshold
When the FA temperature crosses this threshold
on this IO card, an alarm will be set.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.20
rc2kIoCardTemperatureFAZoneShutdownThreshold
When the FA temperature crosses this threshold
on this IO card, the card will be shutdown.
celsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.21.1.21

rc2kBootConfigHostTable

table
.1.3.6.1.4.1.2272.1.100.22 · 1 row entry · 6 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kBootConfigHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-MIB::rc2kBootConfigHostTable' 
Table for the bootconfig host info on the device
rc2kBootConfigHostEntry row .1.3.6.1.4.1.2272.1.100.22.1
Entry containing boot config host information.
Indexes
Column Syntax OID
rc2kBootConfigHostSlot
slot number, VSP uses 1,2
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2272.1.100.22.1.1
rc2kBootConfigHostTftpHash
Enables tftp hashing
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.22.1.2
rc2kBootConfigHostTftpRetransmit
Set tftp retransmit timeout counter
Integer32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.2272.1.100.22.1.3
rc2kBootConfigHostTftpTimeout
Set tftp timeout counter
Integer32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.2272.1.100.22.1.4
rc2kBootConfigHostUser
Configure host user
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2272.1.100.22.1.5
rc2kBootConfigHostPassword
Configure host password
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2272.1.100.22.1.6