RC-2K-ATM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
81

rc2kAtmPortTable

table
.1.3.6.1.4.1.2272.1.100.9.2 · 1 row entry · 10 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kAtmPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-ATM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-ATM-MIB::rc2kAtmPortTable' 
ATM port table
rc2kAtmPortEntry row .1.3.6.1.4.1.2272.1.100.9.2.1
Entry containing infomation of ATM port
Indexes
Column Syntax OID
rc2kAtmPortIfIndex
port number
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2272.1.100.9.2.1.1
rc2kAtmPortNumVpiBits
# of vpi bits. For OC3, the max number of vpibits is 6.
However, for OC12, it is 8. Both media types share
the same MIB object.
Integer32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.2272.1.100.9.2.1.2
rc2kAtmPortNumVciBits
# of vci bits
Integer32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.2272.1.100.9.2.1.3
rc2kAtmPortMediaType
media type
Enumeration
Enumerated Values:
1smf
2mmf
3ds3
 .1.3.6.1.4.1.2272.1.100.9.2.1.4
rc2kAtmPortScrambleEnable
enable scramble
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.9.2.1.5
rc2kAtmPortFramingMode
port framing mode
Enumerationr/w
Enumerated Values:
1sonet
2sdh
3ds3CbitAdm
4ds3CbitPlcp
5ds3M23Adm
6ds3M23Plcp
 .1.3.6.1.4.1.2272.1.100.9.2.1.6
rc2kAtmPortClockSource
clock source
Enumerationr/w
Enumerated Values:
1loopTimed
2freeRunning
 .1.3.6.1.4.1.2272.1.100.9.2.1.7
rc2kAtmPortLineSpeed
line speed
Enumeration
Enumerated Values:
1oc3c
2oc12c
3ds3
 .1.3.6.1.4.1.2272.1.100.9.2.1.8
rc2kAtmPortLoopBackMode
loop back mode
Enumerationr/w
Enumerated Values:
1off
2internal
3external
4ds3PayloadLoop
5ds3DiagLoop
6ds3LineLoop
 .1.3.6.1.4.1.2272.1.100.9.2.1.9
rc2kAtmPortMacAddress
XLR assigned MAC addr
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2272.1.100.9.2.1.10

rc2kAtmPvcTable

table
.1.3.6.1.4.1.2272.1.100.9.3 · 1 row entry · 21 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kAtmPvcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-ATM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-ATM-MIB::rc2kAtmPvcTable' 
ATM Pvc table
rc2kAtmPvcEntry row .1.3.6.1.4.1.2272.1.100.9.3.1
Entry containing infomation of ATM Pvc
Indexes
Column Syntax OID
rc2kAtmPvcIfIndex
port number
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2272.1.100.9.3.1.1
rc2kAtmPvcVpi
vpi of this pvc
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2272.1.100.9.3.1.2
rc2kAtmPvcVci
vci of this pvc
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.2272.1.100.9.3.1.3
rc2kAtmPvcPvcId
internal pvc id
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.9.3.1.4
rc2kAtmPvcName
name of pvc
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2272.1.100.9.3.1.5
rc2kAtmPvcEncapsulation
encapsulation
Enumerationr/w
Enumerated Values:
1null
2llcSnap
 .1.3.6.1.4.1.2272.1.100.9.3.1.6
rc2kAtmPvcServiceType
service type
Enumerationr/w
Enumerated Values:
1ubr
2vbr
 .1.3.6.1.4.1.2272.1.100.9.3.1.7
rc2kAtmPvcPeakCellRate
Peak cell rate in cells per second. The maximum
peak cell rate is half of the line rate. The peak
cell rate for MDA type OC12 must be less than 733491.
However, for OC3, it is less than 182783.
Integer32r/w
Constraints:
range: 86-733490
 .1.3.6.1.4.1.2272.1.100.9.3.1.8
rc2kAtmPvcSustainedCellRate
Sustained cell rate in cells per second. The maximum
peak cell rate is half of the line rate. The peak
cell rate for MDA type OC12 must be less than 733491.
However, for OC3, it is less than 182783.
Integer32r/w
Constraints:
range: 86-733490
 .1.3.6.1.4.1.2272.1.100.9.3.1.9
rc2kAtmPvcMaxBurstSize
max burst size
Integer32r/w
Constraints:
range: 2-255
 .1.3.6.1.4.1.2272.1.100.9.3.1.10
rc2kAtmPvcRowStatus
row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.100.9.3.1.11
rc2kAtmPvcOamLbMgmtEnable
Indicate whether end-to-end F5 OAM loopback is enabled.
When it is enabled, OAM loopback request is sent
periodically
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.9.3.1.12
rc2kAtmPvcOamLbSendFrequency
Number of seconds between transmitting OAM loopback
request
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.100.9.3.1.13
rc2kAtmPvcOamLbRetryFrequency
Number of seconds between retry
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.100.9.3.1.14
rc2kAtmPvcOamLbUpCount
Number of consecutive end-to-end F5 OAM loopback cell
responses that must be received in order to change a
PVC connection state to up
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.100.9.3.1.15
rc2kAtmPvcOamLbDownCount
Number of consecutive end-to-end F5 OAM loopback cell
responses that are not received in order to change a
PVC state to down.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2272.1.100.9.3.1.16
rc2kAtmPvcOamTrapEnable
Indicate whether OAM trap is enabled. When it is enabled,
a trap is sent to the management station when
rc2kAtmPvcOamVcStatus is going up or down.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.9.3.1.17
rc2kAtmPvcOamVcStatus
Indicate the status of PVC link.
Not Managed--VC is not being managed by OAM.
Down Verify --An OAM loopback failed. End-to-end F5 OAM
loopback cells are sent at retry frequency to verify
the VC is really down. Afte…
Enumeration
Enumerated Values:
1notManaged
2downVerify
3down
4upVerify
5up
 .1.3.6.1.4.1.2272.1.100.9.3.1.18
rc2kAtmPvcOamLbRequestSent
Number of OAM loopback request sent
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.3.1.19
rc2kAtmPvcOamLbReplySent
Number of OAM loopback reply sent
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.3.1.20
rc2kAtmPvcOamLbReplyReceived
Number of OAM loopback reply received
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.3.1.21

rc2kAtm1483ElanTable

table
.1.3.6.1.4.1.2272.1.100.9.5 · 1 row entry · 18 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kAtm1483ElanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-ATM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-ATM-MIB::rc2kAtm1483ElanTable' 
ATM 1483Elan table
rc2kAtm1483ElanEntry row .1.3.6.1.4.1.2272.1.100.9.5.1
Entry containing infomation of ATM 1483Elan
Indexes
Column Syntax OID
rc2kAtm1483ElanIfIndex
port number
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2272.1.100.9.5.1.1
rc2kAtm1483ElanElanId
Elan Id
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.9.5.1.2
rc2kAtm1483ElanNumPvcIds
# pvc-ids in list
Integer32
Constraints:
range: 0-64
 .1.3.6.1.4.1.2272.1.100.9.5.1.3
rc2kAtm1483ElanPvcIds
list of pvc-ids. each pvc-id is represented by a
32 bit value this field can contain a maximum of
64 pvc-ids.
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.2272.1.100.9.5.1.4
rc2kAtm1483ElanVlanId
vlan tag for this 1483
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.100.9.5.1.5
rc2kAtm1483ElanRowStatus
row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2272.1.100.9.5.1.6
rc2kAtm1483ElanConnectType
connection type
Enumerationr/w
Enumerated Values:
1bridged
2ip
3ipx
4muxIpIpx
 .1.3.6.1.4.1.2272.1.100.9.5.1.7
rc2kAtm1483ElanVlanMacAddress
mac for vlan
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2272.1.100.9.5.1.8
rc2kAtm1483ElanDummyMacAddress
dummy mac for the other router
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2272.1.100.9.5.1.9
rc2kAtm1483ElanLocalIpAddress
local ip, if ConnectType is ip(2)
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.100.9.5.1.10
rc2kAtm1483ElanRemoteIpAddress
remote ip, if ConnectType is ip(2)
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2272.1.100.9.5.1.11
rc2kAtm1483ElanInArpSendEnable
enable arp sending on the port, if
ConnectType is ip(2)
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2272.1.100.9.5.1.12
rc2kAtm1483ElanInArpSendInterval
interval of arp sending on the port, if
ConnectType is ip(2)
Integer32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.2272.1.100.9.5.1.13
rc2kAtm1483ElanIpxVlanEncapMethod
vlan encapsulation method, if ConnectType
is ipx(3)
Enumerationr/w
Enumerated Values:
1llc
2snap
3ether-ii
4raw
 .1.3.6.1.4.1.2272.1.100.9.5.1.14
rc2kAtm1483ElanIpxNetworkNum
network number, if ConnectType is ipx(3)
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.100.9.5.1.15
rc2kAtm1483ElanStgId
An identifier used to identify a STG in the device,
only in bridge mode
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.9.5.1.16
rc2kAtm1483ElanrcStgTaggedBpduVlanId
The VLAN ID to be used for tagging BPDUs,
only in bridge mode.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2272.1.100.9.5.1.17
rc2kAtm1483ElanIpxNetworkAddr
network number, instead of rc2kAtm1483ElanIpxNetworkNum
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.2272.1.100.9.5.1.18

rc2kAtmSioCardConfigTable

table
.1.3.6.1.4.1.2272.1.100.9.8 · 1 row entry · 6 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kAtmSioCardConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-ATM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-ATM-MIB::rc2kAtmSioCardConfigTable' 
2kAtm Sio Card Config Table
rc2kAtmSioCardConfigEntry row .1.3.6.1.4.1.2272.1.100.9.8.1
Entry containing infomation of 2kAtm Sio Card Config.
Indexes
Column Syntax OID
rc2kAtmSioCardConfigSlotIndex
slot Index.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.100.9.8.1.1
rc2kAtmSioCardConfigAction
 Enumerationr/w
Enumerated Values:
0other
1reset
 .1.3.6.1.4.1.2272.1.100.9.8.1.2
rc2kAtmSioCardConfigTraceMode
 Enumerationr/w
Enumerated Values:
0other
1traceOn
 .1.3.6.1.4.1.2272.1.100.9.8.1.3
rc2kAtmSioCardConfigImageFileName
ATM Image file name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2272.1.100.9.8.1.4
rc2kAtmSioCardConfigElanStatsEnable
Enable/Disable Elan Statistics collection
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2272.1.100.9.8.1.5
rc2kAtmSioCardConfigStatsPollPeriod
Time interval after which Elan statistics would
be polled
Integer32r/w
Constraints:
range: 3-15
 .1.3.6.1.4.1.2272.1.100.9.8.1.6

rc2kAtmPortStatsTable

table
.1.3.6.1.4.1.2272.1.100.9.10 · 1 row entry · 11 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kAtmPortStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-ATM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-ATM-MIB::rc2kAtmPortStatsTable' 
ATM port statistics table
rc2kAtmPortStatsEntry row .1.3.6.1.4.1.2272.1.100.9.10.1
Entry containing infomation of ATM port statistics
Indexes
Column Syntax OID
rc2kAtmPortStatsIfIndex
port number
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2272.1.100.9.10.1.1
rc2kAtmPortStatsInCells
Number of Cells received from ATM interface
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.9.10.1.2
rc2kAtmPortStatsOutCells
Number of Cells transmitted by ATM interface
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.9.10.1.3
rc2kAtmPortStatsOutIdleCells
Number of Idle Cells transmitted
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.9.10.1.4
rc2kAtmPortStatsInHecCorrected
Number of received cells in which HCS
was corrected
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.10.1.5
rc2kAtmPortStatsInHecUncorrected
Number of received cells dropped because HCS
couldn't be corrected
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.10.1.6
rc2kAtmPortStatsInUnknownProtos
Number of received cells dropped with wrong VPI/VCI
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.10.1.7
rc2kAtmPortStatsInPkts
Number of AAL5 CPCS PDUs received
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.10.1.8
rc2kAtmPortStatsOutPkts
Number of AAL5 CPCS PDUs transmitted
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.10.1.9
rc2kAtmPortStatsInDroppedPkts
Number of AAL5 CPCS PDUs dropped due to
resource exhaustion
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.10.1.10
rc2kAtmPortStatsOutDroppedPkts
Number of AAL5 CPCS PDUs dropped because the
transmitter closed the channel
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.10.1.11

rc2kAtmVPortStatsTable

table
.1.3.6.1.4.1.2272.1.100.9.11 · 1 row entry · 15 columns
Open in standard view
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk rc2kAtmVPortStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-2K-ATM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-2K-ATM-MIB::rc2kAtmVPortStatsTable' 
ATM Elan statistics table
rc2kAtmVPortStatsEntry row .1.3.6.1.4.1.2272.1.100.9.11.1
Entry containing infomation of ATM Elan statistics
Indexes
Column Syntax OID
rc2kAtmVPortStatsIfIndex
port number
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2272.1.100.9.11.1.1
rc2kAtmVPortStatsVlanId
Vlan Id
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2272.1.100.9.11.1.2
rc2kAtmVPortStatsClear
Clear Elan Stats
Enumerationr/w
Enumerated Values:
0other
1clear
 .1.3.6.1.4.1.2272.1.100.9.11.1.3
rc2kAtmVPortStatsInOctets
AAL5 CPCS PDU octects received from ATM interface
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.9.11.1.4
rc2kAtmVPortStatsOutOctets
AAL5 CPCS PDU octects transmitted out of ATM interface
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2272.1.100.9.11.1.5
rc2kAtmVPortStatsInErrors
AAL5 CPCS PDUs received with errors from ATM interface.
These errors include CRC-32 errors,SAR time-out errors
And oversized SDU errors
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.6
rc2kAtmVPortStatsOutErrors
Number of AAL5 CPCS PDUs that couldn't be transmitted
due to errors
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.7
rc2kAtmVPortStatsInDiscards
Number of received AAL5 CPCS PDUs discarded
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.8
rc2kAtmVPortStatsOutDiscards
Number of AAL5 CPCS PDUs which are to be transmitted
but discarded
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.9
rc2kAtmVPortStatsInUcastPkts
Received ethernet/IP/IPX packets whose destination
address is neither a multicast nor a broadcast
address
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.10
rc2kAtmVPortStatsOutUcastPkts
Forwarded ethernet/IP/IPX packets whose destination
address is neither a multicast nor a broadcast
address
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.11
rc2kAtmVPortStatsInMulticastPkts
Received ethernet/IP/IPX packets whose destination
MAC address(or IP address in case of IP ELAN type)
is multicast MAC address or class D IP address
(in case of IP ELAN type)
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.12
rc2kAtmVPortStatsOutMulticastPkts
Forwarded ethernet/IP/IPX packets whose destination
MAC address(or IP address in case of IP ELAN type)
is multicast MAC address or class D IP address
(in case of IP ELAN type)
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.13
rc2kAtmVPortStatsInBroadcastPkts
Received ethernet/IP/IPX packets whose destination
address in broadcast address
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.14
rc2kAtmVPortStatsOutBroadcastPkts
Forwarded ethernet/IP/IPX packets whose destination
address in broadcast address
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2272.1.100.9.11.1.15