RBTWS-AP-TC
Textual Conventions used by Enterasys Networks wireless switches.
AP = Access Point;
AC = Access Controller (wireless switch),
the device that runs a SNMP Agent using these TCs.
Copyright 2008 Enterasys Networks, Inc.
All rights reserved.
This SNMP Management Information Base
Specification (Specification) embodies
confidential and proprietary intellectual property.
This Specification is supplied 'AS IS' and Enterasys Networks
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification.
|
Imported Objects
| rbtwsMibs | RBTWS-ROOT-MIB |
| Unsigned32, Integer32, MODULE-IDENTITY | SNMPv2-SMI |
| TEXTUAL-CONVENTION | SNMPv2-TC |
Type Definitions (27)
| Name | Base Type | Values/Constraints |
|---|---|---|
 RbtwsAccessType | ap(1), dap(2), wired(3) | |
| RbtwsApAttachType | directAttach(1), networkAttach(2) | |
| RbtwsApBias | high(1), low(2) | |
| RbtwsApConnectSecurityType | secure(1), insecure(2), auto(3) | |
| RbtwsApFailDetail | secureHandshakeFailure(2), fingerprintRequired(3), fingerprintMismatch(4), portLinkUp(11), portLinkDown(12), normalTransition(91), failUnknown(99) | |
| RbtwsApFingerprint | range: 0, range: 16 | |
| RbtwsApNum | range: 0..9999 | |
| RbtwsApPortOrDapNum | range: 0..1000 | |
| RbtwsApSerialNum | range: 0..32 | |
| RbtwsApServiceAvailability | fullService(1), noService(2), degradedService(3) | |
| RbtwsApState | cleared(1), init(2), bootStarted(3), imageDownloaded(4), connectFailed(5), configuring(6), configured(7) | |
| RbtwsApTransition | clear(1), timeout(2), reset(3), bootSuccess(4), startConfiguring(5), connectFail(6) | |
| RbtwsApWasOperational | oper(1), nonOper(2) | |
| RbtwsChannelChangeType | util-index(1), rexmit-pkt-offset(2), noise-offset(3), noise(4), utilization(5), phy-error-offset(6), crc-errors-offset(7), radar-detected(8) | |
| RbtwsChannelNum | range: 1..1024 | |
| RbtwsCryptoType | other(1), clear(2), wep(3), wep40(4), wep104(5), tkip(6), aesCcmp(7) | |
| RbtwsPowerLevel | range: 1..18 | |
| RbtwsRadioChannelWidth | channelWidth20MHz(1), channelWidth40MHz(2) | |
| RbtwsRadioConfigState | configInit(1), configFail(2), configOk(3) | |
| RbtwsRadioEnable | enabled(1), disabled(2) | |
| RbtwsRadioMimoState | mimoOther(1), mimo1x1(2), mimo2x3(3), mimo3x3(4) | |
| RbtwsRadioMode | enabled(1), disabled(2), sentry(3) | |
| RbtwsRadioNum | radio-1(1), radio-2(2), not-applicable(3) | |
| RbtwsRadioPowerChangeType | dup-pkts-threshold-exceed(1), retransmit-threshold-exceed(2), clients-optimal-performance-reached(3), def-power-threshold-exceed(4) | |
| RbtwsRadioRate | range: 0, range: 10..540 | |
| RbtwsRadioType | typeUnknown(1), typeA(2), typeB(3), typeG(4), typeNA(5), typeNG(6) | |
| RbtwsRssi | range: -100..0 |
Objects
  rbtwsApTc  | .1.3.6.1.4.1.52.4.15.1.4.3 |