RBN-BIND-MIB Table View

This table contains the objects which identify and configure
circuit bindings.
          
With respect to creation and deletion of entries in this table,
rows are created or deleted when a circuit is created or
deleted - there is no explicit explicit creation or deletion
of rows allowed or required.

rbnBindEntry row .1.3.6.1.4.1.2352.2.17.1.1.1

A conceptual row in the rbnBindTable.

Indexes

rbnBindCircuit

Column	Syntax	OID
rbnBindCircuit A key identifying the circuit for which the binding applies. Note the implication: this key identifies an existing circuit. A basic tenent thus evolves: the circuit must exist before it can be bound. See the definition…	RBN-TCRbnCircuitHandle Type Constraints: range: 8	.1.3.6.1.4.1.2352.2.17.1.1.1.1
rbnBindType The type of the binding. See the definition of the RbnBindType TEXTUAL-CONVENTION for the possible types. The bind type must be appropriate to the type of circuit that it is being applied to. See the AO…	RbnBindTyper/w Type Values: 1 unbound 2 authBind 3 bypassBind 4 interfaceBind 5 subscriberBind 6 l2tptunnelBind 7 sessionBind 8 dot1qBind 9 multiIntfBind 10 multiSubBind 11 multiClipsBind	.1.3.6.1.4.1.2352.2.17.1.1.1.2
rbnBindName A name associated with the binding. This field is only applicable when the value of rbnBindType is: bypassBind interfaceBind subscriberBind l2tptunnelBind multiIntfBind multiSubBind sessionBind …	OctetStringr/w Constraints: range: 1-192	.1.3.6.1.4.1.2352.2.17.1.1.1.3
rbnBindPassword The AAA password. This field is only applicable when the value of rbnBindType is: subscriberBind If the value of rbnBindType is not this bind type, then rbnBindPassword is not instantiated …	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.2352.2.17.1.1.1.4
rbnBindContext The name of the context associated with the binding. This field is applicable only when one of the following rbnBindType values is specified: Bind Type Value of Context --------- ----------…	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.2352.2.17.1.1.1.5
rbnBindAuthContext The name of the authentication context associated with the binding. It is the name of the context to which PPP sessions on the circuits being bound are restricted. Specification of this column for a give…	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.2352.2.17.1.1.1.6
rbnBindServiceGrp The name of the service access list associated with the binding. It is the name of the service access list that defines the services available to the PPP-encapsulated circuit. Specification of this colum…	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.2352.2.17.1.1.1.7
rbnBindAcl The name of the bridge access control list associated with the binding. It is the name of the Access control list to be applied to the session. The access control list must already have been configured in the context …	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.2352.2.17.1.1.1.8
rbnBindAuthChap If 'true', specifies that the PPP authentication protocol to be used is Challenge Handshake Authentication Protocol. This object is applicable only when one of the following rbnBindType values is specifie…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2352.2.17.1.1.1.9
rbnBindAuthPap If 'true', specifies that the PPP authentication protocol to be used is Password Authentication Protocol. This object is applicable only when one of the following rbnBindType values is specified: …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2352.2.17.1.1.1.10
rbnBindAuthWait If 'true', specifies that the inbound CHAP authentication is completed first. In other words, after the two sides have decided to use CHAP, the SMS waits for the inbound side to initiate athentication. I…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2352.2.17.1.1.1.11
rbnBindAuthPapFirst If 'true', specifies that Password Authentication Protocol (PAP) shall be negotiated before Challenge Handshake Authentication Protocol (CHAP). IF 'false', then CHAP is negotiated before PAP. With SNMP g…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2352.2.17.1.1.1.12
rbnBindMaxSessions The maximum number of concurrent sessions allowed on the circuit. Applicable only to circuits which have an encapsulation of type PPPoE. If the circuit is not of this type, then this entry is ignored. S…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2352.2.17.1.1.1.13
rbnBindPvcSlot The chassis slot number associated with this binding. Use of the 'dot1qBind' type is for binding an ATM or Frame Relay PVC to an Ethernet port using the specified VLAN ID in rbnBindVpn. Thi…	RBN-TCRbnSlotr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2352.2.17.1.1.1.14
rbnBindPvcPort The chassis port number associated with this binding. Use of the 'dot1qBind' type is for binding an ATM or Frame Relay PVC to an Ethernet port using the specified VLAN ID in rbnBindVpn. Thi…	RBN-TCRbnPortr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2352.2.17.1.1.1.15
rbnBindVpn The specific tag to which the PVC is mapped on the specified Ethernet port. Use of the 'dot1qBind' type is for binding an ATM or Frame Relay PVC to an Ethernet port using the specified VLAN ID in rbnBindV…	Unsigned32r/w Constraints: range: 2-4094	.1.3.6.1.4.1.2352.2.17.1.1.1.16
rbnBindAuthDhcp If 'true', specifies an authentication mechanism where the DHCP server makes a request to the authentication subsystem upon receipt of incoming DHCP discover packets. This object is applicable only when o…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2352.2.17.1.1.1.17