RAISECOM-RRCP-VLAN-MIB Table View

Rrcp remote config table.

rcRemoteConfigEntry row .1.3.6.1.4.1.8886.6.1.52.2.1.1.1

An entry in the rcRemoteConfigTable. It contains
some configure of remote device.

Indexes

rcRemoteHostMacAddr

Column	Syntax	OID
rcRemoteHostMacAddr The MAC address of remote device.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.8886.6.1.52.2.1.1.1.1
rcRemoteHostName The host name of remote device.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.8886.6.1.52.2.1.1.1.2
rcRemoteBroadcastStormCtrl The broadcast storm control status of remote device.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.6.1.52.2.1.1.1.3
rcRemoteLoopbackDetection The loop back detection status of remote device.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.6.1.52.2.1.1.1.4
rcRemoteLoopbackDetectionStatus The loop back detection result information of remote device.	SWITCH-TCPortList Type Constraints: range: 32	.1.3.6.1.4.1.8886.6.1.52.2.1.1.1.5
rcRemoteDeviceManageVlan The management vlan of remote device.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.6.1.52.2.1.1.1.6
rcRemoteDeviceCfgWrite Write remote device config to hardware.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8886.6.1.52.2.1.1.1.7
rcRemoteDeviceCfgWriteResult Result of write remote device config to hardware.	Enumeration Enumerated Values: 1 other 2 saving 3 successed 4 failed	.1.3.6.1.4.1.8886.6.1.52.2.1.1.1.8
rcRemoteDeviceResetFactory Recover default config and reboot remote device.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8886.6.1.52.2.1.1.1.9
rcRemoteDeviceResetFactoryResult Result of recover default config and reboot remote device.	Enumeration Enumerated Values: 1 other 2 factory-reseting 3 successed 4 failed	.1.3.6.1.4.1.8886.6.1.52.2.1.1.1.10
rcRemoteDeviceReboot Reboot remote device.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8886.6.1.52.2.1.1.1.11

Remote device vlan config table.

rcRemoteVlanCfgEntry row .1.3.6.1.4.1.8886.6.1.52.2.1.2.1

An entry in the rcRemoteVlanCfgTable. It contains
some vlan configure of remote device.

Indexes

rcRemoteHostMacAddr

Column	Syntax	OID
rcRemoteSwitchMode Switch mode of remote device.	Enumerationr/w Enumerated Values: 1 transparent 2 dot1q-vlan 3 port-based-vlan	.1.3.6.1.4.1.8886.6.1.52.2.1.2.1.1
rcRemotePortBasedVlanUpLinkPort The up link port in port-based-mode of remote device.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.8886.6.1.52.2.1.2.1.2

Remote device current vlan config table.

rcRemoteCurrentVlanEntry row .1.3.6.1.4.1.8886.6.1.52.2.1.3.1

An entry in the rcRemoteCurrentVlanTable. It contains
current vlan configure of remote device.

Indexes

rcRemoteHostMacAddr rcRemoteCurrentVlanIndex

Column	Syntax	OID
rcRemoteCurrentVlanIndex The VLAN id of remote device created.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.8886.6.1.52.2.1.3.1.1
rcRemoteCurrentVlanEgressPorts The set of ports that are transmitting traffic for this VLAN as either tagged or untagged frames.	SWITCH-TCPortList Type Constraints: range: 32	.1.3.6.1.4.1.8886.6.1.52.2.1.3.1.2
rcRemoteCurrentVlanRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.6.1.52.2.1.3.1.3

Remote device vlan port config table.

rcRemoteVlanPortEntry row .1.3.6.1.4.1.8886.6.1.52.2.1.4.1

An entry in the rcRemoteVlanPortTable. It contains
port vlan configure of remote device.

Indexes

rcRemoteHostMacAddr rcRemotePortIndex

Column	Syntax	OID
rcRemotePortIndex The port index of remote device.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.8886.6.1.52.2.1.4.1.1
rcRemotePortMode The VLAN port mode of remote device.	Enumerationr/w Enumerated Values: 1 access 2 trunk	.1.3.6.1.4.1.8886.6.1.52.2.1.4.1.2
rcRemotePortNativeVid Native vlan ID of interface for remote device.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.8886.6.1.52.2.1.4.1.3
rcRemotePortAccessEgressAllowVlan Egress VLAN list when port is in access mode of remote device.	SWITCH-TCVlansetr/w Type Constraints: range: 512	.1.3.6.1.4.1.8886.6.1.52.2.1.4.1.4

Remote device qos config table.

rcRemoteQosCfgEntry row .1.3.6.1.4.1.8886.6.1.52.2.1.5.1

An entry in the rcRemoteQosCfgTable. It contains
qos configure of remote device.

Indexes

rcRemoteHostMacAddr

Column	Syntax	OID
rcRemoteMlsQosTrustMode Qos trust mode of remote device.	Enumerationr/w Enumerated Values: 1 port-priority 2 cos	.1.3.6.1.4.1.8886.6.1.52.2.1.5.1.1
rcRemoteMlsQosScheduleMode Qos queue schedule mode of remote device.	Enumerationr/w Enumerated Values: 1 sp 2 wrr	.1.3.6.1.4.1.8886.6.1.52.2.1.5.1.2
rcRemoteMlsQosQueueWeight Qos wrr queue weight of remote device.	Enumerationr/w Enumerated Values: 1 fourth 2 eighth 3 sixteen 4 other	.1.3.6.1.4.1.8886.6.1.52.2.1.5.1.3
rcRemoteMlsQosPortPriorityList The port priority list of remote device.	SWITCH-TCPortListr/w Type Constraints: range: 32	.1.3.6.1.4.1.8886.6.1.52.2.1.5.1.4

Remote port config attribution Table

rcRemotePortConfigAttriEntry row .1.3.6.1.4.1.8886.6.1.52.2.2.1.1

An entry in the rcRemotePortConfigAttriTable. It contains
configuration in each port.

Indexes

rcRemoteHostMacAddr rcRemotePortIndex

Column	Syntax	OID
rcRemotePortAdminStatus The administration status of port.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.6.1.52.2.2.1.1.1
rcRemotePortOperStatus The operation status of port.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.8886.6.1.52.2.2.1.1.2
rcRemotePortDuplexSpeedSet The desired speed and duplex of the interface in remote devices..	Enumerationr/w Enumerated Values: 1 autonegotiate 2 half-10 3 full-10 4 half-100 5 full-100	.1.3.6.1.4.1.8886.6.1.52.2.2.1.1.3
rcRemotePortDuplexSpeedGet The actual speed and duplex for this interface. If the interface is not configured for an acceptable value, a value of illegal(99) is returned. A value of unknown(1) is returned when the interface is down.	Enumeration Enumerated Values: 1 unknown 2 half-10 3 full-10 4 half-100 5 full-100 99 illegal	.1.3.6.1.4.1.8886.6.1.52.2.2.1.1.4
rcRemoteManPortFlowControlEnable Describes flow control of the port of remote device A value of enabled(1)- indicates that the port can process flow-control. A value of disabled(2)- indicates that the port can not process flow-control.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.6.1.52.2.2.1.1.5
rcRemotePortRxRateLimit Describes rate-limit value of the port of remote device at rx direction 0 value is no rate-limit.	Integer32r/w Constraints: range: 0-0 range: 128-8000	.1.3.6.1.4.1.8886.6.1.52.2.2.1.1.6
rcRemotePortTxRateLimit Describes rate-limit value of the port of remote device at tx direction 0 value is no rate-limit.	Integer32r/w Constraints: range: 0-0 range: 128-8000	.1.3.6.1.4.1.8886.6.1.52.2.2.1.1.7

A table of objects that display vct status
of ports.

rcRemotePortVctEntry row .1.3.6.1.4.1.8886.6.1.52.2.2.2.1

A set of objects that display vct status.

Indexes

rcRemoteHostMacAddr rcRemotePortIndex

Column	Syntax	OID
rcRemotePortVCTStart Describes vct is started or not. A value of none (0)- indicates that vct has not been started. A value of started (1)- indicates that vct has been started. A value of stoped (2)- indicates t that vct has been stoped.	Enumerationr/w Enumerated Values: 0 none 1 started 2 stoped	.1.3.6.1.4.1.8886.6.1.52.2.2.2.1.1
rcRemotePortVctCableTxStatus This object identifies the tx direction status of remote device.	Enumeration Enumerated Values: 1 normal 2 open 3 shorted 4 error 5 testing	.1.3.6.1.4.1.8886.6.1.52.2.2.2.1.2
rcRemotePortVctCableRxStatus This object identifies the rx direction status of remote device.	Enumeration Enumerated Values: 1 normal 2 open 3 shorted 4 error 5 testing	.1.3.6.1.4.1.8886.6.1.52.2.2.2.1.3
rcRemotePortVctCableTxLength This object identifies the tx direction length of remote device.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.6.1.52.2.2.2.1.4
rcRemotePortVctCableRxLength This object identifies the rx direction length of remote device.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.6.1.52.2.2.2.1.5

A table of objects that display statistics of ports.

rcRemotePortStatisticsEntry row .1.3.6.1.4.1.8886.6.1.52.2.2.3.1

A set of objects that display port statistics.

Indexes

rcRemoteHostMacAddr rcRemotePortIndex

Column	Syntax	OID
rcRemotePortRxOctets The total number of octets received on the port.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.6.1.52.2.2.3.1.1
rcRemotePortTxOctets The total number of octets transmitted out of the port.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.6.1.52.2.2.3.1.2
rcRemotePortDropOctets The total number of octets droped out of or in of the port.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.6.1.52.2.2.3.1.3