RAISECOM-RIP2-MIB Table View

A list of entries which conserve the RIP configuraton info for each interface.

raisecomRip2IfConfEntry row .1.3.6.1.4.1.8886.1.32.2.2.1.1

Defines an entry in the rcRip2IfConfigTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
raisecomRip2IfConfPassiveInterface The passive interface can only receive RIP packets, but can not send RIP packets. Disable(2) indicates the interface is not passive. Enable(1) indicates the interface is passive.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.1.32.2.2.1.1.1
raisecomRip2IfConfSendVersion Configure the RIP interface to send version-specific packets. None(0) implies sending RIP updates compliant with the global version. rip1(1) implies sending RIP updates compliant with RFC 1058. rip1Compatible(2) im…	Enumerationr/w Enumerated Values: 0 none 1 rip1 2 rip1Compatible 3 rip2	.1.3.6.1.4.1.8886.1.32.2.2.1.1.2
raisecomRip2IfConfReceiveVersion Configure the RIP interface to accept version-specific packets. none implies receiving RIP updates compliant with the global version. rip1(1) implies receiving RIP-1 packets. rip2(2) implies receiving RIP-2 packets. …	Enumerationr/w Enumerated Values: 0 none 1 rip1 2 rip2 3 rip1OrRip2	.1.3.6.1.4.1.8886.1.32.2.2.1.1.3
raisecomRip2IfConfAuthMode The type of Authentication used on this interface. The default value is noAuthentication(1) implies that the RIP version 2 packet without authentication will be sent or received on the interface. SimplePassword(2) im…	Enumerationr/w Enumerated Values: 1 noAuthentication 2 simplePassword 3 md5	.1.3.6.1.4.1.8886.1.32.2.2.1.1.4
raisecomRip2IfConfInputMetricOffset The offset value to be added to the incoming route's metric.	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.8886.1.32.2.2.1.1.5
raisecomRip2IfConfOutputMetricOffset The offset value to be added to the outgoing route's metric.	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.8886.1.32.2.2.1.1.6
raisecomRip2IfConfSplitHorizon It is a switch of the IP interface, which indicates the enable status of Split Horizon function.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.1.32.2.2.1.1.7
raisecomRip2IfConfPoisonReverse It is a swtich of the IP interface, which indicates the enable status of Poison Reverse function.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.1.32.2.2.1.1.8
raisecomRip2IfConfDatabaseClear The flag of clearing RIP routes on this IP interface. When set the value as true(1), the router should clear the route entries associated with this IP interface from RIP routing database except the directly-connected…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8886.1.32.2.2.1.1.9
raisecomRip2IfConfStatisticClear The flag of clearing RIP statistics on this IP interface. When set the value as true(1), the router should clear the RIP statistics on this IP interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8886.1.32.2.2.1.1.10
raisecomRip2IfConfAuthKeyChain Configure the authentication key-chain for the IP interface.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.8886.1.32.2.2.1.1.11

A list of subnets which require separate
status monitoring in RIP.

raisecomRip2IfStatsEntry row .1.3.6.1.4.1.8886.1.32.2.3.1.1

Defines an entry in the rcRip2IfStatisticTable.

Indexes

RIPv2-MIBrip2IfStatAddress

Column	Syntax	OID
raisecomRip2IfStatsRecvValid The number of valid RIP response packets received by the RIP process.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.32.2.3.1.1.1

The list of directly-connected networks which enable the RIP function.

raisecomRip2NetConfEntry row .1.3.6.1.4.1.8886.1.32.2.4.1.1

Defines an entry in the rcRip2NetConfigTable.

Indexes

raisecomRip2NetConfNetwork

Column	Syntax	OID
raisecomRip2NetConfNetwork The number of valid RIP network. It must be Natural Network Number except special Network Number.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.32.2.4.1.1.1
raisecomRip2NetConfRowStatus The row status of the Network configuration table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.32.2.4.1.1.2

The list of RIP routes.

raisecomRip2RouteEntry row .1.3.6.1.4.1.8886.1.32.2.5.1.1

Defines info of one RIP route.

Indexes

raisecomRip2RouteDest raisecomRip2RouteMask raisecomRip2RouteNextHop

Column	Syntax	OID
raisecomRip2RouteDest The destination IP address of the RIP route. An entry with a value of 0.0.0.0 is considered a default route.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.32.2.5.1.1.1
raisecomRip2RouteMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the val…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.32.2.5.1.1.2
raisecomRip2RouteNextHop The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.32.2.5.1.1.3
raisecomRip2RouteLearnFrom The value of this node is the source address of an RIP update packet from which this route is learned.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.32.2.5.1.1.4
raisecomRip2RouteIfIndex The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identifi…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.32.2.5.1.1.5
raisecomRip2RouteMetric The routing metric for the RIP route.	Integer32 Constraints: range: 0-16	.1.3.6.1.4.1.8886.1.32.2.5.1.1.6
raisecomRip2RouteProtoType The routing mechanism via which the RIP route was generated.	Enumeration Enumerated Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 is-is 10 es-is 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp	.1.3.6.1.4.1.8886.1.32.2.5.1.1.7
raisecomRip2RouteStatus The value of this node indicates the current status of the RIP route. A value of permenant(1) implies the route would never be aged. Aging(2) indicates the route is being aged expecting the updates to refresh it. Sup…	Bits Enumerated Values: 1 permenant 2 aging 3 suppress 4 flush	.1.3.6.1.4.1.8886.1.32.2.5.1.1.8
raisecomRip2RouteTimer The value of this node indicates the time of timer associated with a RIP route. And by the value of rcRip2RouteStatus we can identify the timer.	Integer32 Constraints: range: 0-3600	.1.3.6.1.4.1.8886.1.32.2.5.1.1.9

The table is used to config and check redistribute  policy.

raisecomRip2RedistributeEntry row .1.3.6.1.4.1.8886.1.32.2.6.1.1

Defines an entry in the raisecomRip2RedistributeTable.

Indexes

raisecomRip2RedistributeProtocol raisecomRip2RedistributeProcessId

Column	Syntax	OID
raisecomRip2RedistributeProtocol Route protocol to import, only support static, connect, and ospf now.	Enumeration Enumerated Values: 2 local 3 netmgmt 13 ospf	.1.3.6.1.4.1.8886.1.32.2.6.1.1.1
raisecomRip2RedistributeProcessId Process id of import route protocol, only support ospf.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.32.2.6.1.1.2
raisecomRip2RedistributeMetric The metric of import route.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.32.2.6.1.1.3
raisecomRip2RedistributeRouteMapName Specify a route-map.	OctetStringr/w Constraints: range: 0-19	.1.3.6.1.4.1.8886.1.32.2.6.1.1.4
raisecomRip2RedistributeRowStatus This object permits management of the table by facilitating actions such as row creation,construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be mod…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.32.2.6.1.1.5

The table is used to config and retrieve the global distributing-policy.

raisecomRip2DistributeListEntry row .1.3.6.1.4.1.8886.1.32.2.7.1.1

Defines an entry in the raisecomRip2DistributeListTable.

Indexes

raisecomRip2DistrIndex

Column	Syntax	OID
raisecomRip2DistrIndex Defines an index in the RaisecomRip2DistributeListTable. The value 1 is the only valid index in RaisecomRip2DistributeListTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.32.2.7.1.1.1
raisecomRip2DistrInAclNum Filter incoming routing updates by the IP ACL number of RIP distribute-in policy. The range from 0 to MAX-IP-ACL is the valid IP ACL number. The value of MAX-IP-ACL is dependent on specified device. -1 is the invalid…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.32.2.7.1.1.2
raisecomRip2DistrInIpPrefixListName Filter incoming routing updates,the value of this object indicates the name of an ip-prefix-list. The value can be any visible string with the length less than 19. The null character indicates the node is not configed.	OctetStringr/w Constraints: range: 0-19	.1.3.6.1.4.1.8886.1.32.2.7.1.1.3
raisecomRip2DistrInGatewayIpPrefixListName Filtering incoming updates based on gateway ??The value of this object indicates the name of an ip-prefix-list. The value can be any visible string with the length less than 19. The null character indicates the node is…	OctetStringr/w Constraints: range: 0-19	.1.3.6.1.4.1.8886.1.32.2.7.1.1.4
raisecomRip2DistrOutAclNum Filter incoming routing updates by the IP ACL number of RIP distribute-in policy. The range from 0 to MAX-IP-ACL is the valid IP ACL number. The value of MAX-IP-ACL is dependent on specified device. -1 is the invalid…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.32.2.7.1.1.5
raisecomRip2DistrOutIpPrefixListName Filter incoming outgoing updates,the value of this object indicates the name of an ip-prefix-list. The value can be any visible string with the length less than 19. The null character indicates the node is not confige…	OctetStringr/w Constraints: range: 0-19	.1.3.6.1.4.1.8886.1.32.2.7.1.1.6

The table is used to config and check RIP infterface distribute-in policy.

raisecomRip2DistributeListInInterfaceEntry row .1.3.6.1.4.1.8886.1.32.2.7.2.1

Defines an entry in the raisecomRip2DistributeListInInterfaceTable .

Indexes

IF-MIBifIndex

Column	Syntax	OID
raisecomRip2DistrInIfIpPrefixListName Filtering incoming updates based on interface??the value of this object indicates the name of an ip-prefix-list. The value can be any visible string with the length less than 19. The null character indicates the node …	OctetStringr/w Constraints: range: 0-19	.1.3.6.1.4.1.8886.1.32.2.7.2.1.1
raisecomRip2DistrInIfGatewayIpPrefixListName Filtering incoming updates based on interface??the value of this object indicates the name of an gateway ip-prefix-list. The value can be any visible string with the length less than 19. The null character indicates t…	OctetStringr/w Constraints: range: 0-19	.1.3.6.1.4.1.8886.1.32.2.7.2.1.2
raisecomRip2DistrInIfAclNum Filter incoming routing updates by the IP ACL number of RIP distribute-in policy. The range from 0 to MAX-IP-ACL is the valid IP ACL number. The value of MAX-IP-ACL is dependent on specified device. -1 is the invalid…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.32.2.7.2.1.3

The table is used to config and check RIP infterface distribute-out policy.

raisecomRip2DistributeListOutInterfaceEntry row .1.3.6.1.4.1.8886.1.32.2.7.3.1

Defines an entry in the raisecomRip2DistributeListOutInterfaceTable .

Indexes

IF-MIBifIndex

Column	Syntax	OID
raisecomRip2DistrOutIfIpPrefixListName Filtering outgoing updates based on interface??the value of this object indicates the ip-prefix-list name. The value can be any visible string with the length less than 19. The null character indicates the node is not …	OctetStringr/w Constraints: range: 0-19	.1.3.6.1.4.1.8886.1.32.2.7.3.1.1
raisecomRip2DistrOutIfAclNum Filter incoming routing updates by the IP ACL number of RIP distribute-in policy. The range from 0 to MAX-IP-ACL is the valid IP ACL number. The value of MAX-IP-ACL is dependent on specified device. -1 is the invalid…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.32.2.7.3.1.2

The table is used to config and check RIP distribute-out policy based on protocol.

raisecomRip2DistributeListOutProtocolEntry row .1.3.6.1.4.1.8886.1.32.2.7.4.1

Defines an entry in the raisecomRip2DistributeListOutProtocolTable .

Indexes

raisecomRip2DistrOutProtocol raisecomRip2DistrOutProcessId

Column	Syntax	OID
raisecomRip2DistrOutProtocol Imported route protocol, only support static, connect, rip and ospf now.	Enumeration Enumerated Values: 2 local 3 netmgmt 13 ospf	.1.3.6.1.4.1.8886.1.32.2.7.4.1.1
raisecomRip2DistrOutProcessId Process id of import route protocol, only support ospf.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.32.2.7.4.1.2
raisecomRip2DistrOutProIpPrefixListName Filtering outgoing updates based on imported protocol??the value of this object indicates the name of an ip-prefix-list. The value can be any visible string with the length less than 19. The null character indicates th…	OctetStringr/w Constraints: range: 0-19	.1.3.6.1.4.1.8886.1.32.2.7.4.1.3
raisecomRip2DistrOutProAclNum Filter incoming routing updates by the IP ACL number of RIP distribute-in policy. The range from 0 to MAX-IP-ACL is the valid IP ACL number. The value of MAX-IP-ACL is dependent on specified device. -1 is the invalid…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.32.2.7.4.1.4
raisecomRip2DistrOutProRowStatus This object permits management of the table by facilitating actions such as row creation,construction, and destruction.The value of this object has no effect on whether other objects in this conceptual row can be modif…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.32.2.7.4.1.5