RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
15
Rows
15
Columns
134

raisecomRemoteInvariableInfoTable

table
.1.3.6.1.4.1.8886.1.12.1.2 · 1 row entry · 14 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomRemoteInvariableInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB::raisecomRemoteInvariableInfoTable' 
Basic information of remote devices.
raisecomRemoteInvariableInfoEntry row .1.3.6.1.4.1.8886.1.12.1.2.1
Table entry for basic information of each remote device.
Indexes
Column Syntax OID
raisecomRemoteInvariableInfoIndex
Object which specifies a unique entry in the
raisecomRemoteTrapEnable.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.2.1.1
raisecomRemoteSysOid
The vendor's authoritative identification of the network
management subsystem contained in the entity. This value
provides an easy and unambiguous means for determining `what
kind of box' the remote device is.
ObjectIdentifier .1.3.6.1.4.1.8886.1.12.1.2.1.2
raisecomRemoteModuleType
This object specifies module type of remote device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.2.1.3
raisecomRemoteOidCapability
An indication of whether the device support OID parse.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.1.12.1.2.1.4
raisecomRemoteFileTransCapability
An indication of whether the device support file transfer via oam.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.1.12.1.2.1.5
raisecomRemoteOtherCapability
This object specifies oam capbilities set supported by remote device.
The value of 2^n (n>=0&&n<32) stands for each oam capability. 2^0 stands
for IP configuration capability ,2^1 stands for SNMP community configurati…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.2.1.6
raisecomRemoteMainChipId
The main chip id of remote device, probably the id of switch chip
contained in remote device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.2.1.7
raisecomRemoteFpgaChipId
The FPGA chip id of remote device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.2.1.8
raisecomRemoteFpgaSwVer
The FPGA software version of remote device.
OctetString .1.3.6.1.4.1.8886.1.12.1.2.1.9
raisecomRemoteSystemSwVer
Remote devices system software version.
OctetString .1.3.6.1.4.1.8886.1.12.1.2.1.10
raisecomRemoteSystemHwVer
Remote devices system hardware version.
OctetString .1.3.6.1.4.1.8886.1.12.1.2.1.11
raisecomRemotePortNum
The port number of remote device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.2.1.12
raisecomRemoteDeviceName
The name of remote device.
OctetString .1.3.6.1.4.1.8886.1.12.1.2.1.13
raisecomRemoteInvariableInfoStatus
The status of this invariable information entry.
SWITCH-RMON-MIBEntryStatus
Type Values:
1valid
2createRequest
3underCreation
4invalid
 .1.3.6.1.4.1.8886.1.12.1.2.1.14

raisecomRemoteEnvironmentTable

table
.1.3.6.1.4.1.8886.1.12.1.3 · 1 row entry · 7 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomRemoteEnvironmentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB::raisecomRemoteEnvironmentTable' 
Environment information of remote devices.
raisecomRemoteEnvironmentEntry row .1.3.6.1.4.1.8886.1.12.1.3.1
Table entry for environment information of remote devices.
Indexes
Column Syntax OID
raisecomRemoteEnvironmentIndex
Object which specifies a unique entry in the
raisecomRemoteEnvironmentTable.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.3.1.1
raisecomRemoteTemperature
The current environment temperature of remote device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.3.1.2
raisecomRemoteVolt3300
Current voltage value of 3.3v of remote device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.3.1.3
raisecomRemoteVolt2500
Current voltage value of 2.5v of remote device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.3.1.4
raisecomRemoteVolt1800
Current voltage value of 1.8v of remote device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.3.1.5
raisecomRemoteVolt1200
Current voltage value of 1.2v of remote device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.3.1.6
raisecomRemoteVoltNormal
This object specifies whether remote votage is in normal range or not.
Enumeration
Enumerated Values:
1normal
2high
3low
 .1.3.6.1.4.1.8886.1.12.1.3.1.7

raisecomRemoteSysCfgTable

table
.1.3.6.1.4.1.8886.1.12.1.4 · 1 row entry · 6 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomRemoteSysCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB::raisecomRemoteSysCfgTable' 
A table of remote device system config.
raisecomRemoteSysCfgEntry row .1.3.6.1.4.1.8886.1.12.1.4.1
Table entry of remote device system config.
Indexes
Column Syntax OID
raisecomRemoteSysCfgIndex
Object which specifies a unique entry in the
raisecomRemoteSysCfgTable.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.4.1.1
raisecomRemoteSysOperation
Specifies system command in remote device.Currently,support three
types command:reboot,write and erase.Reboot command is used to reset
remote device,write is used to save startup-config file in remote device,
and erase …
Enumerationr/w
Enumerated Values:
1ready
2write
3erase
4reboot
 .1.3.6.1.4.1.8886.1.12.1.4.1.2
raisecomRemoteSysOperationState
Specifies the state of this system operation to remote device.
Enumeration
Enumerated Values:
1ready
2running
3successful
4failed
 .1.3.6.1.4.1.8886.1.12.1.4.1.3
raisecomRemoteHostName
Host name of Remote device.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.8886.1.12.1.4.1.4
raisecomRemoteOamNotificationEnable
Specifies whether or not remote device send OAM notificaton frames.
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.1.12.1.4.1.5
raisecomRemoteMaxAllowedFrameLength
This object specifies max ethernet frame length of remote device.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.4.1.6

raisecomRemoteCommunityTable

table
.1.3.6.1.4.1.8886.1.12.1.5 · 1 row entry · 3 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomRemoteCommunityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB::raisecomRemoteCommunityTable' 
A table of SNMPv1/v2c community string of remote devices.
raisecomRemoteCommunityEntry row .1.3.6.1.4.1.8886.1.12.1.5.1
Table entry of community of remote devices.
Indexes
Column Syntax OID
raisecomRemoteCommunityIndex
Object which specifies a unique entry in the
raisecomRemoteCommunityTable.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.5.1.1
raisecomRemoteCommunityName
The SNMPv1/v2c community name string in remote device.
In remote device's community table,the index of this community
is 3,and the view for this community is 'internet'.
OctetStringr/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.8886.1.12.1.5.1.2
raisecomRemoteCommunityPermission
This object specifies the type of access allowed.
'readOnly(1)' allows GET operations (i.e., GET,
GET-NEXT, GET-BULK) and 'readWrite(2)' allows both
GET and SET operations.
Enumerationr/w
Enumerated Values:
1readOnly
2readWrite
3invalid
 .1.3.6.1.4.1.8886.1.12.1.5.1.3

raisecomRemoteL3Table

table
.1.3.6.1.4.1.8886.1.12.1.6 · 1 row entry · 9 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomRemoteL3Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB::raisecomRemoteL3Table' 
A table of remote subnet parameters.
raisecomRemoteL3Entry row .1.3.6.1.4.1.8886.1.12.1.6.1
Table entry of L3 subnet parameters of remote devices.
Indexes
Column Syntax OID
raisecomRemoteL3Index
Object which specifies a unique entry in the
raisecomRemoteL3Table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.6.1.1
raisecomRemoteL3IpAddr
The IP Address of remote device. This IP address
logically AND'ed with 'raisecomRemoteL3Mask' yields
the actual subnet value for this subnet.Set the object
as '0.0.0.0' means delete IP address of remote devices
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.12.1.6.1.2
raisecomRemoteL3Mask
The subnet mask for this remote subnet. It contains 1's
in the bit positions for the net and subnet IDs and 0's in
the bit positions for host ID. The 1's must be contiguous,
starting with the left most bit.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.12.1.6.1.3
raisecomRemoteL3VidIface
This object contains the actual VLAN ID (VID) from 1 to 4094.
It is actually the management vlan of remote device.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8886.1.12.1.6.1.4
raisecomRemoteL3VidMemberPorts
The set of ports which are permanently assigned to the egress
list for this VLAN by management.Changes to a bit in this object
affect the per-port per-VLAN Registrar control for Registration
Fixed for the relevant GVR…
SWITCH-TCPortList
Type Constraints:
range: 32
 .1.3.6.1.4.1.8886.1.12.1.6.1.5
raisecomRemoteL3VidUntaggedPorts
The set of ports which should transmit egress packets for this VLAN
as untagged. The default value of this object for the default VLAN
(dot1qVlanIndex = 1) is a string of appropriate length including all
ports. The…
SWITCH-TCPortList
Type Constraints:
range: 32
 .1.3.6.1.4.1.8886.1.12.1.6.1.6
raisecomRemoteL3DefaultGateway
With this object to Set or get default gateway of remote devices.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.12.1.6.1.7
raisecomRemoteL3ObIpAddr
The out IP Address of remote device.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.12.1.6.1.8
raisecomRemoteL3ObMask
The subnet mask for this remote subnet.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.1.12.1.6.1.9

raisecomRemotePortTable

table
.1.3.6.1.4.1.8886.1.12.1.7 · 1 row entry · 20 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomRemotePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB::raisecomRemotePortTable' 
A table of remote devices port properties.
raisecomRemotePortEntry row .1.3.6.1.4.1.8886.1.12.1.7.1
Table entry for port control and status information in remote devices.
Indexes
Column Syntax OID
raisecomRemoteIfindex
The ifIndex value based 1 which identifies the unique interface of local device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.7.1.1
raisecomRemotePortIfindex
The ifIndex value based 1 which identifies the unique interface of remote device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.7.1.2
raisecomRemotePortType
Port type in remote devices,same as slot type.
Enumeration
Enumerated Values:
0inexistence
1fx-1000M
2tx-1000M
3fx-100M
4tx-100M
 .1.3.6.1.4.1.8886.1.12.1.7.1.3
raisecomRemotePortName
The port name of remote devices.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.8886.1.12.1.7.1.4
raisecomRemotePortAdminStatus
The administrative state of the port on remote devices.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.8886.1.12.1.7.1.5
raisecomRemotePortOperStatus
The current operational state of the interface in remote devices.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.8886.1.12.1.7.1.6
raisecomRemotePortDuplexSpeedSet
The desired speed and duplex of the interface in remote devices.
Enumerationr/w
Enumerated Values:
1autonegotiate
2half-10
3full-10
4half-100
5full-100
6half-1000
7full-1000
 .1.3.6.1.4.1.8886.1.12.1.7.1.7
raisecomRemotePortDuplexSpeedGet
The actual speed and duplex for this interface. If the interface
is not configured for an acceptable value, a value of illegal(99) is
returned. A value of unknown(1) is returned when the interface is down.
Enumeration
Enumerated Values:
1unknown
2half-10
3full-10
4half-100
5full-100
6half-1000
7full-1000
99illegal
 .1.3.6.1.4.1.8886.1.12.1.7.1.8
raisecomRemotePortFlowControlEnable
Set the flow control on the interface to enable(1) or disable(2).
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.1.12.1.7.1.9
raisecomRemotePortFlowControlStatus
The actual port flow control status of remote device.
SWITCH-TCEnableVar
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.1.12.1.7.1.10
raisecomRemotePortIngressRate
The value is the ingress rate( Kbps) of the port.
Integer32r/w
Constraints:
range: 0-1048576
 .1.3.6.1.4.1.8886.1.12.1.7.1.11
raisecomRemotePortEgressRate
The value is the egress rate( Kbps) of the port.
Integer32r/w
Constraints:
range: 0-1048576
 .1.3.6.1.4.1.8886.1.12.1.7.1.12
raisecomRemotePortFaultPassEnable
Set fault pass to enable(1) or disable(2) on the port in remote device.
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.1.12.1.7.1.13
raisecomRemotePortFaultPassPorts
The ports set which should be down when fault pass occurs.If
the value is 0,stands for fault pass function is disable on
this port,otherwise fault pass function is enable and the ports
set specifies which ports shou…
SWITCH-TCPortListr/w
Type Constraints:
range: 32
 .1.3.6.1.4.1.8886.1.12.1.7.1.14
raisecomRemotePortFaultPassStatus
Port state changging result of fault pass. If normal(1), there is no
fault pass occurring. If down(2), the port is down because of fault
pass occurring.
Enumeration
Enumerated Values:
1normal
2down
 .1.3.6.1.4.1.8886.1.12.1.7.1.15
raisecomRemotePortFaultReturnEnable
Set fault return on the port in remote device to enable(1) or disable(2).
This value of TP is unavailable.
Enumerationr/w
Enumerated Values:
1enable
2disable
3unavailable
 .1.3.6.1.4.1.8886.1.12.1.7.1.16
raisecomRemotePortFaultReturnStatus
Port state changging result of fault return.If normal(1), there
is no fault return occurring.If down(2), the port is down result
of fault return occurring.This value of TP is unavailable.
Enumeration
Enumerated Values:
1normal
2down
3unavailable
 .1.3.6.1.4.1.8886.1.12.1.7.1.17
raisecomRemotePortSD
SD status. This value of TP is unavailable.
Enumeration
Enumerated Values:
1normal
2sd
3unavailable
 .1.3.6.1.4.1.8886.1.12.1.7.1.18
raisecomRemoteOptModuleType
Optical module type of remote device port.
Enumeration
Enumerated Values:
1optical-M
2optical-S1
3optical-S2
4optical-S3
5optical-SS13
6optical-SS15
7optical-SS23
8optical-SS25
9optical-SS35
10unknown
 .1.3.6.1.4.1.8886.1.12.1.7.1.19
raisecomRemotePortDescr
The description of a port in remote device.
OctetStringr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.8886.1.12.1.7.1.20

raisecomRemotePortStatsTable

table
.1.3.6.1.4.1.8886.1.12.1.8 · 1 row entry · 20 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomRemotePortStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB::raisecomRemotePortStatsTable' 
A table of remote devices port statistics.
raisecomRemotePortStatsEntry row .1.3.6.1.4.1.8886.1.12.1.8.1
Table entry of remote devices port statistics.
Indexes
Column Syntax OID
raisecomRemoteStatsIfindex
The ifIndex value based 1 which identifies the unique interface of local device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.8.1.1
raisecomRemoteStatsPortIfindex
The ifIndex value based 1 which identifies the unique interface of remote device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.8.1.2
raisecomRemotePortInOctets
The total number of octets received on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.12.1.8.1.3
raisecomRemotePortInPkts
The total number of packets received on the port..
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.12.1.8.1.4
raisecomRemotePortInUcastPkts
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.12.1.8.1.5
raisecomRemotePortInMulticastPkts
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast
address at this sub-layer. For a MAC layer protocol, this
includes both Group and Functional addresses
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.12.1.8.1.6
raisecomRemotePortInBroadcastPkts
The number of packets, delivered by this sub-layer to a higher (sub-)layer,
which were addressed to a broadcast address at this sub-layer.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.12.1.8.1.7
raisecomRemotePortOutOctets
The total number of octets transmitted out of the port,
including framing characters.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.12.1.8.1.8
raisecomRemotePortOutPkts
The total number of packets transmitted out of the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.12.1.8.1.9
raisecomRemotePortOutUcastPkts
The total number of packets that higher-level protocols requested be
transmitted, and which were not addressed to a multicast or broadcast
address at this sub-layer, including those that were discarded or not sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.12.1.8.1.10
raisecomRemotePortOutMulticastPkts
The total number of packets that higher-level protocols requested be transmitted,
and which were addressed to a multicast address at this sub-layer, including those
that were discarded or not sent. For a MAC layer pro…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.12.1.8.1.11
raisecomRemotePortOutBroadcastPkts
The total number of packets that higher-level protocols requested be transmitted,
and which were addressed to a broadcast address at this sub-layer, including
those that were discarded or not sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8886.1.12.1.8.1.12
raisecomRemotePortErrorPkts
The total number of bad packets received by a specific port of remote device.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.12.1.8.1.13
raisecomRemotePortDropEvents
The total number of events in which packets were dropped by
the probe due to lack of resources. Note that this number is
not necessarily the number of packets dropped; it is just the
number of times this condition h…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.12.1.8.1.14
raisecomRemotePortCRCAlignErrors
The total number of packets received that had a length (excluding
framing bits, but including FCS octets) of between 64 and 1518 octets,
inclusive, but but had either a bad Frame Check Sequence (FCS) with
an integral n…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.12.1.8.1.15
raisecomRemotePortUndersizePkts
The total number of packets received that were less than 64 octets
long (excluding framing bits, but including FCS octets) and were
otherwise well formed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.12.1.8.1.16
raisecomRemotePortOversizePkts
The total number of packets received that were longer than 1518
octets (excluding framing bits, but including FCS octets) and
were otherwise well formed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.12.1.8.1.17
raisecomRemotePortFragments
The total number of packets received that were less than 64 octets
in length (excluding framing bits but including FCS octets) and had
either a bad Frame Check Sequence (FCS) with an integral number of
octets (FCS Er…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.12.1.8.1.18
raisecomRemotePortJabbers
The total number of packets received that were longer than 1518
octets (excluding framing bits, but including FCS octets), and
had either a bad Frame Check Sequence (FCS) with an integral
number of octets (FCS Error) or…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.12.1.8.1.19
raisecomRemotePortCollisions
The best estimate of the total number of collisions on
this Ethernet segment.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.12.1.8.1.20

raisecomRemoteSfpTable

table
.1.3.6.1.4.1.8886.1.12.1.9 · 1 row entry · 15 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomRemoteSfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB::raisecomRemoteSfpTable' 
The table of remote devices SFP information.
raisecomRemoteSfpEntry row .1.3.6.1.4.1.8886.1.12.1.9.1
Table entry of remote devices SFP information table.
Indexes
Column Syntax OID
raisecomRemoteSfpInterfaceId
This object based 1 identifies the remote port ID of SFP module location.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.9.1.1
raisecomRemoteSfpExist
This object specifies whether remote SFP module exist.
Enumeration
Enumerated Values:
1exist
2notexist
 .1.3.6.1.4.1.8886.1.12.1.9.1.2
raisecomRemoteSfpMediaType
This object specifies the media type of remote SFP module.
Enumeration
Enumerated Values:
0fibersingle
1fiber50um
2fiber625um
3copper
 .1.3.6.1.4.1.8886.1.12.1.9.1.3
raisecomRemoteSfpRXLOS
This object specifies the RX status of remote SFP module.
Enumeration
Enumerated Values:
1normal
2alarm
 .1.3.6.1.4.1.8886.1.12.1.9.1.4
raisecomRemoteSfpTXFault
This object specifies the TX status of remote SFP module.
Enumeration
Enumerated Values:
1normal
2alarm
 .1.3.6.1.4.1.8886.1.12.1.9.1.5
raisecomRemoteSfpTXDisable
Disable or enable the TX of remote SFP module.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.8886.1.12.1.9.1.6
raisecomRemoteSfpModuleType
This object specifies the remote SFP module type.
Enumeration
Enumerated Values:
1unknown
2gbic
3sff
4sfp
 .1.3.6.1.4.1.8886.1.12.1.9.1.7
raisecomRemoteSfpOpticalInterface
This object specifies the optical interface type of remote SFP module.
Enumeration
Enumerated Values:
0unknown
1sc
7lc
34rj45
 .1.3.6.1.4.1.8886.1.12.1.9.1.8
raisecomRemoteSfpSpeedStatus
This object specifies the speed of remote SFP module.
Enumeration
Enumerated Values:
0unknown
1speed125M
2speed155M
6speed622M
12speed1250M
25speed2500M
 .1.3.6.1.4.1.8886.1.12.1.9.1.9
raisecomRemoteSfpTransportDistance
This object specifies the transport distance of remote SFP module.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.8886.1.12.1.9.1.10
raisecomRemoteSfpWaveLength
This object specifies the wave length of remote SFP module.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8886.1.12.1.9.1.11
raisecomRemoteSfpVendor
This object specifies the vendor name of remote SFP module.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.8886.1.12.1.9.1.12
raisecomRemoteSfpProductType
This object specifies the product type of remote SFP module.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.8886.1.12.1.9.1.13
raisecomRemoteSfpVersion
This object specifies the version of remote SFP module.
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.8886.1.12.1.9.1.14
raisecomRemoteSfpSerialNumber
This object specifies the serial number of remote SFP module.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.8886.1.12.1.9.1.15

raisecomRemoteDtTable

table
.1.3.6.1.4.1.8886.1.12.1.10 · 1 row entry · 4 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomRemoteDtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB::raisecomRemoteDtTable' 
The table of remote devices Q-in-Q.
raisecomRemoteDtEntry row .1.3.6.1.4.1.8886.1.12.1.10.1
Table entry of remote devices Q-in-Q table.
Indexes
Column Syntax OID
raisecomRemoteDtSwitchMode
This object identifies the switch mode of remote device.
Enumerationr/w
Enumerated Values:
1transparent
2dot1q-vlan
3double-tagged-vlan
 .1.3.6.1.4.1.8886.1.12.1.10.1.1
raisecomRemoteDtOuterTpid
This object identifies the outer tpid of remote device.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8886.1.12.1.10.1.2
raisecomRemoteDtNativeVlan
This object identifies the native vlan ID of remote device.
On transparent mode, the native vlan is useless; on dot1q-vlan
mode, the ingress packets without tag of acess ports is tagged
with the native vlan ID; on do…
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8886.1.12.1.10.1.3
raisecomRemoteDtAccessPort
This object identifies vlan acess port of remote device.
Enumerationr/w
Enumerated Values:
1line
2client
 .1.3.6.1.4.1.8886.1.12.1.10.1.4

raisecomRemoteSendConfTable

table
.1.3.6.1.4.1.8886.1.12.1.11 · 1 row entry · 1 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomRemoteSendConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB::raisecomRemoteSendConfTable' 
The table for send configuration to remote devices
raisecomRemoteSendConfEntry row .1.3.6.1.4.1.8886.1.12.1.11.1
Table entry for send cofiguration to remote devices.
Indexes
Column Syntax OID
raisecomRemoteSendConf
This object is used to send config frame to remote device
and to save config frame local.
RcRemoteConfigFrameSendStatusr/w
Type Values:
1send
2save
3sendandsave
4waitting
5successful
6failed
Description:
Specifies the status of send config packet to the remote device.
The value 'send' means the config packet should be sent to the remote device and not saved.
The value 'save' means the config packet is just saved as def…
 .1.3.6.1.4.1.8886.1.12.1.11.1.1

raisecomRemoteInLoopbackTable

table
.1.3.6.1.4.1.8886.1.12.1.12 · 1 row entry · 4 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomRemoteInLoopbackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB::raisecomRemoteInLoopbackTable' 
The table of remote devices inside loopback.
raisecomRemoteInLoopbackEntry row .1.3.6.1.4.1.8886.1.12.1.12.1
Table entry of remote devices inside loopback.
Indexes
Column Syntax OID
raisecomRemoteInLoopbackMacExchange
An indication of whether the remote device
exchange MAC address when loopbacking.
Enumeration
Enumerated Values:
1exchange
2noexchange
 .1.3.6.1.4.1.8886.1.12.1.12.1.1
raisecomRemoteInLoopbackCrcRecalSet
This object is used to set whether the remote device
recalculate CRC when loopbacking. This object represents
the desired configuration when initiate remote inside loopback.
Enumerationr/w
Enumerated Values:
1recalculate
2norecalculate
 .1.3.6.1.4.1.8886.1.12.1.12.1.2
raisecomRemoteInLoopbackCrcRecal
An indication of whether the remote device recalculate CRC when loopbacking.
Enumeration
Enumerated Values:
1recalculate
2norecalculate
 .1.3.6.1.4.1.8886.1.12.1.12.1.3
raisecomRemoteInLoopbackStatus
By this object can initiate or terminate remote inside
loopback,also can get remote device loopback status.
Enumerationr/w
Enumerated Values:
1noloopback
2initiatinginloopback
3inloopback
4outloopback
5terminatingInloopback
 .1.3.6.1.4.1.8886.1.12.1.12.1.4

raisecomRemoteVctTable

table
.1.3.6.1.4.1.8886.1.12.1.13 · 1 row entry · 3 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomRemoteVctTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB::raisecomRemoteVctTable' 
The table of remote devices VCT information.
raisecomRemoteVctEntry row .1.3.6.1.4.1.8886.1.12.1.13.1
Table entry of remote devices VCT table.
Indexes
Column Syntax OID
raisecomRemoteVctAttribute
This object identifies the VCT attribute of remote device.
Enumerationr/w
Enumerated Values:
1unSupported
2neverIssued
3issued
4testing
5begin
 .1.3.6.1.4.1.8886.1.12.1.13.1.1
raisecomRemoteVctStatus
This object identifies the VCT status of remote device.
Enumeration
Enumerated Values:
1normal
2open
3shorted
4error
5invalidation
 .1.3.6.1.4.1.8886.1.12.1.13.1.2
raisecomRemoteVctLength
This object identifies the VCT length of remote device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.12.1.13.1.3

raisecomRemoteVlanConfigTable

table
.1.3.6.1.4.1.8886.1.12.1.14 · 1 row entry · 12 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomRemoteVlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB::raisecomRemoteVlanConfigTable' 
The table of remote devices vlan information.
raisecomRemoteVlanConfigEntry row .1.3.6.1.4.1.8886.1.12.1.14.1
Table entry of remote devices vlan table.
Indexes
Column Syntax OID
raisecomRemoteVlanStatus
This object identifies the vlan status of remote device.
RcRemoteVlanStatusr/w
Type Values:
1vlan-forbid
2vlan-dot1q
3vlan-port
Description:
Specifies the status of vlan to be performed.
The value 'vlan-forbid' will forbid vlan function in the equipment.
The value 'vlan-dot1q' will allow 802.1Q vlan function to work in the equipment.
The value 'vlan-port'…
 .1.3.6.1.4.1.8886.1.12.1.14.1.1
raisecomRemoteCosStatus
This object identifies the 802.1p COS status of remote device.
TRUE means cos is forbidden to be used.
FALSE means cos is allowed to be used
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.1.12.1.14.1.2
raisecomRemoteFiberPortTagType
This object identifies the attribute of Fiber Ports' tag in remote device.
RcRemotePortTagStatusr/w
Type Values:
1untag
2tag
Description:
Specifies the status of tag in the port.
The value 'untag' means there is no tags in the port.
The value 'tag' means there is a tag in the port.
 .1.3.6.1.4.1.8886.1.12.1.14.1.3
raisecomRemoteFiberPortPriority
This object identifies the Priority of Fiber Ports' tag in remote device.
The default value is '0'
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8886.1.12.1.14.1.4
raisecomRemoteFiberPortPvid
This object identifies the Pvid of Fiber Ports' tag in remote device.
The default value is '1'
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8886.1.12.1.14.1.5
raisecomRemoteCablePortTagType
This object identifies the attribute of Cable Ports' tag in remote device.
RcRemotePortTagStatusr/w
Type Values:
1untag
2tag
Description:
Specifies the status of tag in the port.
The value 'untag' means there is no tags in the port.
The value 'tag' means there is a tag in the port.
 .1.3.6.1.4.1.8886.1.12.1.14.1.6
raisecomRemoteCablePortPriority
This object identifies the Priority of Cable Ports' tag in remote device.
The default value is '0'
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8886.1.12.1.14.1.7
raisecomRemoteCablePortPvid
This object identifies the Pvid of Cable Ports' tag in remote device.
The default value is '1'
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8886.1.12.1.14.1.8
raisecomRemoteCpuPortTagType
This object identifies the attribute of Cpu Ports' tag in remote device.
RcRemotePortTagStatusr/w
Type Values:
1untag
2tag
Description:
Specifies the status of tag in the port.
The value 'untag' means there is no tags in the port.
The value 'tag' means there is a tag in the port.
 .1.3.6.1.4.1.8886.1.12.1.14.1.9
raisecomRemoteCpuPortPriority
This object identifies the Priority of Cpu Ports' tag in remote device.
The default value is '0'
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8886.1.12.1.14.1.10
raisecomRemoteCpuPortPvid
This object identifies the Pvid of Cpu Ports' tag in remote device.
The default value is '1'
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8886.1.12.1.14.1.11
raisecomRemoteSendVlanConf
This object is used to send vlan config frame to remote device
and to save the config frame local.
RcRemoteConfigFrameSendStatusr/w
Type Values:
1send
2save
3sendandsave
4waitting
5successful
6failed
Description:
Specifies the status of send config packet to the remote device.
The value 'send' means the config packet should be sent to the remote device and not saved.
The value 'save' means the config packet is just saved as def…
 .1.3.6.1.4.1.8886.1.12.1.14.1.12

raisecomRemoteVlanGroupTable

table
.1.3.6.1.4.1.8886.1.12.1.15 · 1 row entry · 3 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomRemoteVlanGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB::raisecomRemoteVlanGroupTable' 
The table of remote devices vlan information.
raisecomRemoteVlanGroupEntry row .1.3.6.1.4.1.8886.1.12.1.15.1
Table entry of remote devices vlan group table.
Indexes
Column Syntax OID
raisecomRemoteVlanGroupIndex
This object identifies the index of vlan group in remote device.
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.8886.1.12.1.15.1.1
raisecomRemoteVlanId
This object identifies the vlan id of the specify vlan group.
The default vlan id of group is 1 and other group's default vlan id is 0 .
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.8886.1.12.1.15.1.2
raisecomRemoteVlanMember
This object identifies the ports belong to the vlan group.
If the frist bit is '1' means fiber port belongs to the vlan group.
If the second bit is '1' means cable port belongs to the vlan group.
If the third bit is '1'…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8886.1.12.1.15.1.3

raisecomRemoteSfpDdmTable

table
.1.3.6.1.4.1.8886.1.12.1.16 · 1 row entry · 13 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomRemoteSfpDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-REMOTE-MANAGEMENT-LOCAL-MIB::raisecomRemoteSfpDdmTable' 
The table of remote devices digital detect management information.
raisecomRemoteSfpDdmEntry row .1.3.6.1.4.1.8886.1.12.1.16.1
Table entry of remote devices digital detect management table.
Indexes
Column Syntax OID
raisecomRemoteSfpDdmValid
This object identifies the SFM in remote device is valid.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.1.12.1.16.1.1
raisecomRemoteSfpDdmMode
This object identifies the mode of SFP in remote device.
RcRemoteSfpDdmMode
Type Values:
0unknown
1inside
2outside
Description:
Specifies the mode of SFP DDM.
The value 'unknown' means the remote SFP DDM mode is unknown.
The value 'inside' means the remote SFP DDM mode is inside.
The value 'outside' means the remote SFP DDM mode is outside.
 .1.3.6.1.4.1.8886.1.12.1.16.1.2
raisecomRemoteSfpDdmTemperature
This object identifies temperature of SFP in remote device. A unit is a ??(1/1000Celsius).
Integer32
Constraints:
range: -128000-127996
 .1.3.6.1.4.1.8886.1.12.1.16.1.3
raisecomRemoteSfpDdmSupplyVolt
This object identifies the volt of SFP in remote device. A unit is 100uV.
Integer32
Constraints:
range: 0-65500
 .1.3.6.1.4.1.8886.1.12.1.16.1.4
raisecomRemoteSfpDdmBiasCurrent
This object identifies the bias current of SFP in remote device. A unit is 2uA.
Integer32
Constraints:
range: 0-65500
 .1.3.6.1.4.1.8886.1.12.1.16.1.5
raisecomRemoteSfpDdmOpticalTxPower
This object identifies the optical transmit power of SFP in remote device. A unit is 0.1uW.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8886.1.12.1.16.1.6
raisecomRemoteSfpDdmOpticalRxPower
This object identifies the optical receive power of SFP in remote device. A unit is 0.1uW.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8886.1.12.1.16.1.7
raisecomRemoteSfpDdmAlarm
This object identifies the SFP alarm is occur.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8886.1.12.1.16.1.8
raisecomRemoteSfpDdmAlarmTemStatus
This object identifies the SFP alarm status of tempreture in remote device.
RcRemoteSfpDdmAlarmStatus
Type Values:
0normal
1low
2high
Description:
Specifies the status of SFP DDM alarm.
The value 'normal' means the remote SFP DDM is normal.
The value 'low' means the remote SFP DDM is lower than threshold.
The value 'high' means the remote SFP DDM is higher than…
 .1.3.6.1.4.1.8886.1.12.1.16.1.9
raisecomRemoteSfpDdmAlarmVoltStatus
This object identifies the SFP alarm status of volt in remote device.
RcRemoteSfpDdmAlarmStatus
Type Values:
0normal
1low
2high
Description:
Specifies the status of SFP DDM alarm.
The value 'normal' means the remote SFP DDM is normal.
The value 'low' means the remote SFP DDM is lower than threshold.
The value 'high' means the remote SFP DDM is higher than…
 .1.3.6.1.4.1.8886.1.12.1.16.1.10
raisecomRemoteSfpDdmAlarmCurrentStatus
This object identifies the SFP alarm status of current in remote device.
RcRemoteSfpDdmAlarmStatus
Type Values:
0normal
1low
2high
Description:
Specifies the status of SFP DDM alarm.
The value 'normal' means the remote SFP DDM is normal.
The value 'low' means the remote SFP DDM is lower than threshold.
The value 'high' means the remote SFP DDM is higher than…
 .1.3.6.1.4.1.8886.1.12.1.16.1.11
raisecomRemoteSfpDdmAlarmTxPowerStatus
This object identifies the SFP alarm status of transmit power in remote device.
RcRemoteSfpDdmAlarmStatus
Type Values:
0normal
1low
2high
Description:
Specifies the status of SFP DDM alarm.
The value 'normal' means the remote SFP DDM is normal.
The value 'low' means the remote SFP DDM is lower than threshold.
The value 'high' means the remote SFP DDM is higher than…
 .1.3.6.1.4.1.8886.1.12.1.16.1.12
raisecomRemoteSfpDdmAlarmRxPowerStatus
This object identifies the SFP alarm status of receive power in remote device.
RcRemoteSfpDdmAlarmStatus
Type Values:
0normal
1low
2high
Description:
Specifies the status of SFP DDM alarm.
The value 'normal' means the remote SFP DDM is normal.
The value 'low' means the remote SFP DDM is lower than threshold.
The value 'high' means the remote SFP DDM is higher than…
 .1.3.6.1.4.1.8886.1.12.1.16.1.13