RAISECOM-RELAY-MIB Table View

This table contains information about the protocols being
tunneled.

rcRelayProtocolEntry row .1.3.6.1.4.1.8886.6.1.35.2.1

Information about the protocols being tunneled.

Indexes

SWITCH-SYSTEM-MIBrcPortIndex

Column	Syntax	OID
rcRelayProtocolType Indicates tunneled protocol of the interface. If a BIT is set, then the value of the corresponding protocol is tunneled. Specifically, if the 'stp(0)' BIT is set, then the Spanning Tree Protocol PDU is t…	Bitsr/w Enumerated Values: 0 stp 1 dot1x 2 lacp 3 gmrp 4 gvrp 5 cdp 6 vtp 7 pvst 8 udld 9 pagp	.1.3.6.1.4.1.8886.6.1.35.2.1.1
rcRelayProtocolVlan Specifies vlan ID of tunneled protocol PDUs of the interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.6.1.35.2.1.2
rcRelayProtocolEgressPort Specifies egress port of tunneled protocol PDUs of the interface.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.6.1.35.2.1.3
rcRelayProtocolPortStatus The desired state of the interface by RELAY.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.8886.6.1.35.2.1.4

This table contains information about the thresholds for
protocol tunneling. Only tunneled protocol filtering capable
interfaces are shown. The objects will be on a per interface,
per protocol basis.

rcRelayThresholdEntry row .1.3.6.1.4.1.8886.6.1.35.3.1

Information about the thresholds for protocol tunneling. Only
tunneled protocol filtering capable interfaces are shown. The
entries will be on a per interface, per protocol basis

Indexes

SWITCH-SYSTEM-MIBrcPortIndex rcRelayThresholdProtocolIndex

Column	Syntax	OID
rcRelayThresholdProtocolIndex Supported protocol for devices which allow the setting of thresholds on a per interface, per protocol basis.	Enumeration Enumerated Values: 1 stp 2 dot1x 3 lacp 4 gmrp 5 gvrp 6 cdp 7 vtp 8 pvst 9 udld 10 pagp	.1.3.6.1.4.1.8886.6.1.35.3.1.1
rcRelayDropThreshold The drop threshold on an interface for a given protocol. After reaching this drop threshold, the interface will start dropping PDUs for the given protocol. This value cannot be greater than the value of rcRelayShutdownT…	PDUs/secSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.6.1.35.3.1.2
rcRelayShutdownThreshold The shutdown threshold on an interface for a given protocol. After reaching the shutdown threshold, the interface will shutdown for the given protocol. This value cannot be less than the value of rcRelayDropThreshold. …	PDUs/secSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.6.1.35.3.1.3

This table contains protocol tunneling statistics on the
interface.

rcRelayStatisticsEntry row .1.3.6.1.4.1.8886.6.1.35.4.1

Protocol tunneling statistics on the interface.

Indexes

SWITCH-SYSTEM-MIBrcPortIndex rcRelayStatsProtocolIndex

Column	Syntax	OID
rcRelayStatsProtocolIndex A tunneled protocol of an interface.	Enumeration Enumerated Values: 1 stp 2 dot1x 3 lacp 4 gmrp 5 gvrp 6 cdp 7 vtp 8 pvst 9 udld 10 pagp	.1.3.6.1.4.1.8886.6.1.35.4.1.1
rcRelayEncapStats The tunneled PDU encapsulation statistics of an interface. These statistics cover the number of tunneled ingress PDUs.	encapsulated PDUsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.6.1.35.4.1.2
rcRelayDeEncapStats The tunneled PDU de-encapsulation statistics of an interface. These statistics cover the number of tunneled egress PDUs.	de-encapsulated PDUsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.6.1.35.4.1.3
rcRelayDropStats The number of PDUs dropped on an interface for a given protocol. The PDUs will be dropped when the rcRelayDropThreshold is reached.	PDUsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.6.1.35.4.1.4