RAISECOM-OSPFV2-MIB Table View

The table enable or disable ospf traps

raisecomOspfTrapControlEntry row .1.3.6.1.4.1.8886.1.47.1.1.1

Define an entry in the raisecomOspfTrapControl.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.

Indexes

raisecomOspfProcessId

Column	Syntax	OID
raisecomOspfSetTrap Whether the Device shoule send traps.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.1.47.1.1.1.1
raisecomOspfConfigErrorType Potential types of configuration conflicts. Used by the ospfConfigError and ospfConfigVir- tError traps.	Enumeration Enumerated Values: 1 badVersion 2 areaMismatch 3 unknownNbmaNbr 4 unknownVirtualNbr 5 authTypeMismatch 6 authFailure 7 netMaskMismatch 8 helloIntervalMismatch 9 deadIntervalMismatch 10 optionMismatch	.1.3.6.1.4.1.8886.1.47.1.1.1.2
raisecomOspfPacketType OSPF packet types.	Enumeration Enumerated Values: 1 hello 2 dbDescript 3 lsReq 4 lsUpdate 5 lsAck	.1.3.6.1.4.1.8886.1.47.1.1.1.3
raisecomOspfPacketSrc The IP address of an inbound packet that can- not be identified by a neighbor instance.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.1.1.1.4

OSPF global Vars for every ospf process.

raisecomOspfGlobalEntry row .1.3.6.1.4.1.8886.1.47.2.1.1

OSPF global Vars for every ospf process.

Indexes

raisecomOspfProcessId

Column	Syntax	OID
raisecomOspfProcessId A 32-bit unsigned integer uniquely identifying the ospf process.	ProcessID Type Constraints: range: 1..5	.1.3.6.1.4.1.8886.1.47.2.1.1.1
raisecomOspfRouterId A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses. This object …	RouterIDr/w	.1.3.6.1.4.1.8886.1.47.2.1.1.2
raisecomOspfAdminStat The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces. This object is persistent…	SWITCH-TCEnableVar Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.1.47.2.1.1.3
raisecomOspfVersionNumber The current version number of the OSPF protocol is 2.	Enumeration Enumerated Values: 2 version2	.1.3.6.1.4.1.8886.1.47.2.1.1.4
raisecomOspfAreaBdrRtrStatus A flag to note whether this router is an Area Border Router.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8886.1.47.2.1.1.5
raisecomOspfASBdrRtrStatus A flag to note whether this router is configured as an Autonomous System Border Router. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8886.1.47.2.1.1.6
raisecomOspfExternLsaCount The number of external (LS type-5) link state advertisements in the link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.1.1.7
raisecomOspfExternLsaCksumSum The 32-bit sum of the LS checksums of the external link state advertisements contained in the link state database. This sum can be used to determine if there has been a change in a router's link state database and to c…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.1.1.8
raisecomOspfOriginateNewLsas The number of new link state advertisements that have been originated. This number is incremented each time the router originates a new LSA. Discontinuities in the value of this counter can occur at re-i…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.1.1.9
raisecomOspfRxNewLsas The number of link state advertisements received that are determined to be new instantiations. This number does not include newer instantiations of self-originated link state advertisements. Discontinuiti…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.1.1.10
raisecomOspfExtLsdbLimit The maximum number of non-default AS-external LSAs entries that can be stored in the link state database. If the value is -1, then there is no limit. When the number of non-default AS-external LSAs in a …	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.8886.1.47.2.1.1.11
raisecomOspfExitOverflowInterval The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external LSAs. When set to 0, the router will not leave …	PositiveInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.8886.1.47.2.1.1.12
raisecomOspfReferenceBandwidth Reference bandwidth in millionbits/second for calculating default interface metrics. The default value is 100 MBPS. This object is persistent and when written the entity SHOULD save the change to non-vol…	millionbits per secondUnsigned32r/w Constraints: range: 1-4296967	.1.3.6.1.4.1.8886.1.47.2.1.1.13
raisecomOspfAsLsaCount The number of AS-scope link state advertisements in the AS-scope link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.1.1.14
raisecomOspfAsLsaCksumSum The 32-bit unsigned sum of the LS checksums of the AS link state advertisements contained in the AS-scope link state database. This sum can be used to determine if there has been a change in a router's AS-scope link st…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.1.1.15
raisecomOspfStubRouterSupport The router's support for stub router functionality.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8886.1.47.2.1.1.16
raisecomOspfStubRouterAdvertisement This object controls the advertisement of stub router LSAs by the router. The value doNotAdvertise will result in the advertisement of a standard router LSA and is the default value. This object is persi…	Enumeration Enumerated Values: 1 doNotAdvertise 2 advertise	.1.3.6.1.4.1.8886.1.47.2.1.1.17
raisecomOspfAdminDistance The administrative distance of ospf process.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.8886.1.47.2.1.1.18
raisecomOspfSpfInterval The number of seconds between two SPF calculation.	Integer32r/w Constraints: range: 1-60	.1.3.6.1.4.1.8886.1.47.2.1.1.19
raisecomOspfReset Reset ospf process by process ID.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8886.1.47.2.1.1.20
raisecomOspfExportMetric The default metric of imporing route into ospf process.	Integer32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.8886.1.47.2.1.1.21
raisecomOspfExportTag The default tag of importing route into ospf process.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.1.1.22
raisecomOspfExportType The default type of importing route into ospf process.	Enumerationr/w Enumerated Values: 1 type1 2 type2	.1.3.6.1.4.1.8886.1.47.2.1.1.23
raisecomOspfNetCounts It bas been used to describe the total number of networks in OSPF process.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.1.1.24
raisecomOspfAreaCounts It bas been used to describe the number of areas in OSPF process.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.1.1.25
raisecomOspfNssaAreaCounts It bas been used to describe the number of NSSA areas in OSPF process.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.1.1.26
raisecomOspfSpfCounts It bas been used to describe the total number of SPF calculation in OSPF process.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.1.1.27
raisecomOspfGlobalStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.47.2.1.1.28
raisecomOspfRedistributeRouteLimit import limit of route.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.8886.1.47.2.1.1.29

Information describing the configured parameters and
cumulative statistics of the router's attached areas.
The interfaces and virtual links are configured
as part of these areas.  Area 0.0.0.0, by definition,
is the backbone area.

raisecomOspfAreaEntry row .1.3.6.1.4.1.8886.1.47.2.2.1

Information describing the configured parameters and
cumulative statistics of one of the router's attached areas.
The interfaces and virtual links are configured as part of
these areas. Area 0.0.0.0, by definition, is …

Indexes

raisecomOspfProcessId raisecomOspfAreaId

Column	Syntax	OID
raisecomOspfAreaId A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.	AreaID	.1.3.6.1.4.1.8886.1.47.2.2.1.1
raisecomOspfAuthType The authentication type specified for an area.	OspfAuthenticationTyper/w Type Values: 0 none 1 simplePassword 2 md5	.1.3.6.1.4.1.8886.1.47.2.2.1.2
raisecomOspfImportAsExtern Indicates if an area is a stub area, NSSA, or standard area. Type-5 AS-external LSAs and type-11 Opaque LSAs are not imported into stub areas or NSSAs. NSSAs import AS-external data as type-7 LSAs	Enumeration Enumerated Values: 1 importExternal 2 importNoExternal 3 importNssa	.1.3.6.1.4.1.8886.1.47.2.2.1.3
raisecomOspfSpfRuns The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm. Discontinuities in the value of this coun…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.2.1.4
raisecomOspfAreaBdrRtrCount The total number of Area Border Routers reachable within this area. This is initially zero and is calculated in each Shortest Path First (SPF) pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.2.1.5
raisecomOspfAsBdrRtrCount The total number of Autonomous System Border Routers reachable within this area. This is initially zero and is calculated in each SPF pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.2.1.6
raisecomOspfAreaLsaCount The total number of link state advertisements in this area's link state database, excluding AS-external LSAs.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.2.1.7
raisecomOspfAreaLsaCksumSum The 32-bit sum of the link state advertisements' LS checksums contained in this area's link state database. This sum excludes external (LS type-5) link state advertisements. The sum can be used to determine if there ha…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.2.1.8
raisecomOspfAreaSummary The variable ospfAreaSummary controls the import of summary LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the router will not originate summary LSAs into the stub…	Enumerationr/w Enumerated Values: 1 noAreaSummary 2 sendAreaSummary	.1.3.6.1.4.1.8886.1.47.2.2.1.9
raisecomOspfAreaNssaTranslatorRole Indicates an NSSA border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs.	Enumerationr/w Enumerated Values: 1 always 2 candidate	.1.3.6.1.4.1.8886.1.47.2.2.1.10
raisecomOspfAreaNssaTranslatorState Indicates if and how an NSSA border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border router's OspfAreaNssaExtTranslatorRole has b…	Enumeration Enumerated Values: 1 enabled 2 elected 3 disabled	.1.3.6.1.4.1.8886.1.47.2.2.1.11
raisecomOspfAreaNssaTranslatorStabilityInterval The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties.	secondsPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.8886.1.47.2.2.1.12
raisecomOspfAreaNssaTranslatorEvents Indicates the number of translator state changes that have occurred since the last boot-up. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at oth…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.2.1.13
raisecomOspfAreaDefaultCost It indicates the cost of default route of NSSA area or stub area.	BigMetricr/w Type Constraints: range: 0..16777215	.1.3.6.1.4.1.8886.1.47.2.2.1.14
raisecomOspfAreaType It has been used to describe the type of area,area 0 indicates backbone, area that has virtual-links is transmit area. When area is configured as stub,it's a stub area, and same as nssa area.other areas are called no…	Enumeration Enumerated Values: 1 backbone 2 normal 3 stub 4 nssa 5 transmit	.1.3.6.1.4.1.8886.1.47.2.2.1.15
raisecomOspfAreaAbrCount It has been used to describe the number of ABR in this area.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.2.1.16
raisecomOspfAreaAsbrCount It has been used to describe the number of ASBR in this area.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.2.1.17
raisecomOspfAreaStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.47.2.2.1.18
raisecomOspfAreaFilterInIpPrefixListName Filter incoming summary lsa,the value of this object indicates the name of an ip-prefix-list.	OctetStringr/w Constraints: range: 1-19	.1.3.6.1.4.1.8886.1.47.2.2.1.19
raisecomOspfAreaFilterOutIpPrefixListName Filter outgoing summary lsa,the value of this object indicates the name of an ip-prefix-list.	OctetStringr/w Constraints: range: 1-19	.1.3.6.1.4.1.8886.1.47.2.2.1.20

The list of directly-connected networks which enable 
the OSPF function.

raisecomOspfNetWorkEntry row .1.3.6.1.4.1.8886.1.47.2.3.1

Defines an entry in the raisecomOspfNetWorkTable.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.

Indexes

raisecomOspfProcessId raisecomOspfAreaId raisecomOspfNet raisecomOspfMask

Column	Syntax	OID
raisecomOspfNet The IP address of the net or subnet indicated by the range.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.3.1.1
raisecomOspfMask The subnet mask that pertains to the net or subnet.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.3.1.2
raisecomOspfNetWorkStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.47.2.3.1.3

The set of metrics that will be advertised
by a default Area Border Router into a stub area.

raisecomOspfStubAreaEntry row .1.3.6.1.4.1.8886.1.47.2.4.1

The metric for a given Type of Service that
will be advertised by a default Area Border
Router into a stub area.

Information in this table is persistent and when this object
is written the entity SHOULD sav…

Indexes

raisecomOspfProcessId raisecomOspfStubAreaId

Column	Syntax	OID
raisecomOspfStubAreaId The 32-bit identifier for the stub area. On creation, this can be derived from the instance.	AreaID	.1.3.6.1.4.1.8886.1.47.2.4.1.1
raisecomOspfStubAreaOption The option of STUB area.True means that ABR cann't send summary lsa to stub area.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8886.1.47.2.4.1.2
raisecomOspfStubAreaStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.47.2.4.1.3

The set of metrics that will be advertised
by a default Area Border Router into a Nssa area.

raisecomOspfNssaAreaEntry row .1.3.6.1.4.1.8886.1.47.2.5.1

The metric for a given Type of Service that
will be advertised by a default Area Border
Router into a Nssa area.

Information in this table is persistent and when this object
is written the entity SHOULD sav…

Indexes

raisecomOspfProcessId raisecomOspfNssaAreaId

Column	Syntax	OID
raisecomOspfNssaAreaId The 32-bit identifier for the nssa area. On creation, this can be derived from the instance.	AreaID	.1.3.6.1.4.1.8886.1.47.2.5.1.1
raisecomOspfNssaAreaOption The option of Nssa area. If first bit is set, Router should generate default type-7 lsa; if second bit is set, nssa area cann't import ex- ternal route; if third bit is set, ABR cann't send summary lsas to the nssa area.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.8886.1.47.2.5.1.2
raisecomOspfNssaAreaStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.47.2.5.1.3

The OSPF Interface Table describes the interfaces
from the viewpoint of OSPF.
It augments the ipAddrTable with OSPF specific information.

raisecomOspfIfEntry row .1.3.6.1.4.1.8886.1.47.2.6.1

The OSPF interface entry describes one interface
from the viewpoint of OSPF.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.

Indexes

raisecomOspfProcessId raisecomOspfAddressLessIf

Column	Syntax	OID
raisecomOspfAddressLessIf For the purpose of easing the instancing of addressed and addressless interfaces; this variable takes the value 0 on interfaces with IP addresses and the corresponding value of ifIndex for interfaces having no IP addres…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.8886.1.47.2.6.1.1
raisecomOspfIfIpAddress The IP address of this OSPF interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.6.1.2
raisecomOspfIfAreaId A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.	AreaID	.1.3.6.1.4.1.8886.1.47.2.6.1.3
raisecomOspfIfType The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies…	Enumerationr/w Enumerated Values: 1 broadcast 2 nbma 3 pointToPoint 5 pointToMultipoint	.1.3.6.1.4.1.8886.1.47.2.6.1.4
raisecomOspfIfAdminStat The OSPF interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.	Status Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.8886.1.47.2.6.1.5
raisecomOspfIfRtrPriority The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on t…	DesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.8886.1.47.2.6.1.6
raisecomOspfIfTransitDelay The estimated number of seconds it takes to transmit a link state update packet over this interface. Note that the minimal value SHOULD be 1 second.	secondsUpToMaxAger/w Type Constraints: range: 0..3600	.1.3.6.1.4.1.8886.1.47.2.6.1.7
raisecomOspfIfRetransInterval The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State reques…	secondsUpToMaxAger/w Type Constraints: range: 0..3600	.1.3.6.1.4.1.8886.1.47.2.6.1.8
raisecomOspfIfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.	secondsHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.8886.1.47.2.6.1.9
raisecomOspfIfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attac…	secondsPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.8886.1.47.2.6.1.10
raisecomOspfIfPollInterval The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor.	secondsPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.8886.1.47.2.6.1.11
raisecomOspfIfState The OSPF Interface State.	Enumeration Enumerated Values: 1 down 2 loopback 3 waiting 4 pointToPoint 5 designatedRouter 6 backupDesignatedRouter 7 otherDesignatedRouter	.1.3.6.1.4.1.8886.1.47.2.6.1.12
raisecomOspfIfDesignatedRouter The IP address of the designated router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.6.1.13
raisecomOspfIfBackupDesignatedRouter The IP address of the backup designated router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.6.1.14
raisecomOspfIfEvents The number of times this OSPF interface has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other t…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.6.1.15
raisecomOspfIfAuthKeyId The key id of md5 authentication.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.8886.1.47.2.6.1.16
raisecomOspfIfAuthSimpleKeyType The type of password for simple authentication.	Enumerationr/w Enumerated Values: 0 plain 7 cipher	.1.3.6.1.4.1.8886.1.47.2.6.1.17
raisecomOspfIfAuthMd5KeyType The type of password for md5 authentication.	Enumerationr/w Enumerated Values: 0 plain 7 cipher	.1.3.6.1.4.1.8886.1.47.2.6.1.18
raisecomOspfIfAuthSimpleKey The password used as an OSPF authentication key when simple password security is enabled.	OctetStringr/w Constraints: range: 0-68	.1.3.6.1.4.1.8886.1.47.2.6.1.19
raisecomOspfIfAuthMd5Key The password used as an OSPF authentication key when md5 security is enabled.	OctetStringr/w Constraints: range: 0-68	.1.3.6.1.4.1.8886.1.47.2.6.1.20
raisecomOspfIfAuthKeyChain The name of key chain.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.8886.1.47.2.6.1.21
raisecomOspfIfAuthType The authentication type specified for an interface. Note that this object can be used to engage in significant attacks against an OSPF router.	OspfAuthenticationTyper/w Type Values: 0 none 1 simplePassword 2 md5	.1.3.6.1.4.1.8886.1.47.2.6.1.22
raisecomOspfIfLsaCount The total number of link-local link state advertisements in this interface's link-local link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.6.1.23
raisecomOspfIfLsaCksumSum The 32-bit unsigned sum of the Link State Advertisements' LS checksums contained in this interface's link-local link state database. The sum can be used to determine if there has been a change in the interface's link st…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.6.1.24
raisecomOspfIfDesignatedRouterId The Router ID of the designated router.	RouterID	.1.3.6.1.4.1.8886.1.47.2.6.1.25
raisecomOspfIfBackupDesignatedRouterId The Router ID of the backup designated router.	RouterID	.1.3.6.1.4.1.8886.1.47.2.6.1.26
raisecomOspfIfPassive Indicate the interface is a passive interface.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.1.47.2.6.1.27
raisecomOspfIfMtu Indicate ignore the interface's mtu.	SWITCH-TCEnableVarr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.8886.1.47.2.6.1.28
raisecomOspfIfMetric The metric of using this Type of Service on this interface. The default value of the TOS 0 metric is 10^8 / ifSpeed.	Metricr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.8886.1.47.2.6.1.29

Information about this router's virtual interfaces
that the OSPF Process is configured to carry on.

raisecomOspfVirtIfEntry row .1.3.6.1.4.1.8886.1.47.2.7.1

Information about a single virtual interface.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.

Indexes

raisecomOspfProcessId raisecomOspfVirtIfAreaId raisecomOspfVirtIfNeighbor

Column	Syntax	OID
raisecomOspfVirtIfAreaId The transit area that the virtual link traverses. By definition, this is not 0.0.0.0.	AreaID	.1.3.6.1.4.1.8886.1.47.2.7.1.1
raisecomOspfVirtIfNeighbor The Router ID of the virtual neighbor.	RouterID	.1.3.6.1.4.1.8886.1.47.2.7.1.2
raisecomOspfVirtIfTransitDelay The estimated number of seconds it takes to transmit a Link State update packet over this interface. Note that the minimal value SHOULD be 1 second.	secondsUpToMaxAger/w Type Constraints: range: 0..3600	.1.3.6.1.4.1.8886.1.47.2.7.1.3
raisecomOspfVirtIfRetransInterval The number of seconds between link state avertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State request packets. This…	secondsUpToMaxAger/w Type Constraints: range: 0..3600	.1.3.6.1.4.1.8886.1.47.2.7.1.4
raisecomOspfVirtIfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.	secondsHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.8886.1.47.2.7.1.5
raisecomOspfVirtIfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neig…	secondsPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.8886.1.47.2.7.1.6
raisecomOspfVirtIfState OSPF virtual interface states.	Enumeration Enumerated Values: 1 down 4 pointToPoint	.1.3.6.1.4.1.8886.1.47.2.7.1.7
raisecomOspfVirtIfEvents The number of state changes or error events on this virtual link. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by t…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.7.1.8
raisecomOspfVirtIfAuthKeyId The key id of md5 authentication.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.8886.1.47.2.7.1.9
raisecomOspfVirtIfAuthSimpleKeyType The type of password for simple authentication.	Enumerationr/w Enumerated Values: 0 plain 7 cipher	.1.3.6.1.4.1.8886.1.47.2.7.1.10
raisecomOspfVirtIfAuthMd5KeyType The type of password for md5 authentication.	Enumerationr/w Enumerated Values: 0 plain 7 cipher	.1.3.6.1.4.1.8886.1.47.2.7.1.11
raisecomOspfVirtIfAuthSimpleKey The password used as an OSPF authentication key when simple password security is enabled.	OctetStringr/w Constraints: range: 0-68	.1.3.6.1.4.1.8886.1.47.2.7.1.12
raisecomOspfVirtIfAuthMd5Key The password used as an OSPF authentication key when md5 security is enabled.	OctetStringr/w Constraints: range: 0-68	.1.3.6.1.4.1.8886.1.47.2.7.1.13
raisecomOspfVirtIfAuthKeyChain The name of key chain.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.8886.1.47.2.7.1.14
raisecomOspfVirtIfAuthType The authentication type specified for a virtual interface. Note that this object can be used to engage in significant attacks against an OSPF router.	OspfAuthenticationTyper/w Type Values: 0 none 1 simplePassword 2 md5	.1.3.6.1.4.1.8886.1.47.2.7.1.15
raisecomOspfVirtIfLsaCount The total number of link-local link state advertisements in this virtual interface's link-local link state database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.7.1.16
raisecomOspfVirtIfLsaCksumSum The 32-bit unsigned sum of the link state advertisements' LS checksums contained in this virtual interface's link-local link state database. The sum can be used to determine if there has been a change in the virtual int…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.7.1.17
raisecomOspfVirtIfCost It has been used to describe the cost of virtual interface.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.8886.1.47.2.7.1.18
raisecomOspfVirtIfStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.47.2.7.1.19

A table describing all non-virtual neighbors
in the locality of the OSPF router.

raisecomOspfNbrEntry row .1.3.6.1.4.1.8886.1.47.2.8.1

The information regarding a single neighbor.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.

Indexes

raisecomOspfProcessId raisecomOspfNbrIpAddr

Column	Syntax	OID
raisecomOspfNbrIpAddr The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor's interfaces.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.8.1.1
raisecomOspfNbrAddressLessIndex On an interface having an IP address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.8886.1.47.2.8.1.2
raisecomOspfNbrRtrId A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.	RouterID	.1.3.6.1.4.1.8886.1.47.2.8.1.3
raisecomOspfNbrOptions A bit mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.8.1.4
raisecomOspfNbrPriority The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.	DesignatedRouterPriority Type Constraints: range: 0..255	.1.3.6.1.4.1.8886.1.47.2.8.1.5
raisecomOspfNbrState The state of the relationship with this neighbor.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full	.1.3.6.1.4.1.8886.1.47.2.8.1.6
raisecomOspfNbrEvents The number of times this neighbor relationship has changed state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at othe…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.8.1.7
raisecomOspfNbrLsRetransQLen The current length of the retransmission queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.8.1.8
raisecomOspfNbrMode It has been used to describe the master-slave mode of neighbor.	Enumeration Enumerated Values: 1 slave 2 master	.1.3.6.1.4.1.8886.1.47.2.8.1.9

A table describing all configured neigbors on nbma network.

raisecomOspfNbmaCfgNbrEntry row .1.3.6.1.4.1.8886.1.47.2.9.1

The information regarding a Configured neighbor.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.

Indexes

raisecomOspfProcessId raisecomOspfNbmaCfgNbrIpAddr

Column	Syntax	OID
raisecomOspfNbmaCfgNbrIpAddr The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor's interfaces.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.9.1.1
raisecomOspfNbmaCfgNbrPriority The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.	DesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.8886.1.47.2.9.1.2
raisecomOspfNbmaCfgNbrStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.47.2.9.1.3

This table describes all virtual neighbors.
Since virtual links are configured
in the Virtual Interface Table, this table is read-only.

raisecomOspfVirtNbrEntry row .1.3.6.1.4.1.8886.1.47.2.10.1

Virtual neighbor information.

Indexes

raisecomOspfProcessId raisecomOspfVirtNbrArea raisecomOspfVirtNbrRtrId

Column	Syntax	OID
raisecomOspfVirtNbrArea The Transit Area Identifier.	AreaID	.1.3.6.1.4.1.8886.1.47.2.10.1.1
raisecomOspfVirtNbrRtrId A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.	RouterID	.1.3.6.1.4.1.8886.1.47.2.10.1.2
raisecomOspfVirtNbrIpAddr The IP address this virtual neighbor is using.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.10.1.3
raisecomOspfVirtNbrOptions A bit mask corresponding to the neighbor's options field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.10.1.4
raisecomOspfVirtNbrState The state of the virtual neighbor relationship.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeStart 6 exchange 7 loading 8 full	.1.3.6.1.4.1.8886.1.47.2.10.1.5
raisecomOspfVirtNbrEvents The number of times this virtual link has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other tim…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.10.1.6
raisecomOspfVirtNbrLsRetransQLen The current length of the retransmission queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.10.1.7
raisecomOspfVirtNbrLessIf It has been used to describe the out interface index of this virtual neighbor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.10.1.8
raisecomOspfVirtNbrMode It has been used to describe the master-slave mode of virtual neighbor.	Enumeration Enumerated Values: 1 slave 2 master	.1.3.6.1.4.1.8886.1.47.2.10.1.9

The Area Aggregate Table acts as an adjunct
to the Area Table.  It describes those address aggregates
that are configured to be propagated from an area.
Its purpose is to reduce the amount of information
that is known beyond an Area's borders.
          
It contains a set of IP address ranges
specified by an IP address/IP network mask pair.
For example, a class B address range of X.X.X.X
with a network mask of 255.255.0.0 includes all IP
addresses from X.X.0.0 to X.X.255.255.
          
Note that if ranges are configured such that one range
subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0
and 10.1.0.0 mask 255.255.0.0),
the most specific match is the preferred one.

raisecomOspfAreaAggregateEntry row .1.3.6.1.4.1.8886.1.47.2.11.1

A single area aggregate entry.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.

Indexes

raisecomOspfProcessId raisecomOspfAreaAggregateAreaID raisecomOspfAreaAggregateLsdbType raisecomOspfAreaAggregateNet raisecomOspfAreaAggregateMask

Column	Syntax	OID
raisecomOspfAreaAggregateAreaID The area within which the address aggregate is to be found.	AreaID	.1.3.6.1.4.1.8886.1.47.2.11.1.1
raisecomOspfAreaAggregateLsdbType The type of the address aggregate. This field specifies the Lsdb type that this address aggregate applies to.	Enumeration Enumerated Values: 3 summaryLink 7 nssaExternalLink	.1.3.6.1.4.1.8886.1.47.2.11.1.2
raisecomOspfAreaAggregateNet The IP address of the net or subnet indicated by the range.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.11.1.3
raisecomOspfAreaAggregateMask The subnet mask that pertains to the net or subnet.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.11.1.4
raisecomOspfAreaAggregateEffect Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (advertiseMatching) or result in the subnet's not being advertised at all outside the area.	Enumerationr/w Enumerated Values: 1 advertiseMatching 2 doNotAdvertiseMatching	.1.3.6.1.4.1.8886.1.47.2.11.1.5
raisecomOspfAreaAggregateStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.47.2.11.1.6

It contains a set of IP address ranges
specified by an IP address/IP network mask pair.
For example, a class B address range of X.X.X.X
with a network mask of 255.255.0.0 includes all IP
addresses from X.X.0.0 to X.X.255.255.
          
Note that if ranges are configured such that one range
subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0
and 10.1.0.0 mask 255.255.0.0),
the most specific match is the preferred one.

raisecomOspfExternalAggregateEntry row .1.3.6.1.4.1.8886.1.47.2.12.1

A single external aggregate entry.

Information in this table is persistent and when this object
is written the entity SHOULD save the change to non-volatile
storage.

Indexes

raisecomOspfProcessId raisecomOspfExternalAggregateNet raisecomOspfExternalAggregateMask

Column	Syntax	OID
raisecomOspfExternalAggregateNet The IP address of the net or subnet indicated by the range.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.12.1.1
raisecomOspfExternalAggregateMask The subnet mask that pertains to the net or subnet.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.12.1.2
raisecomOspfExternalAggregateEffect This object controls the advertisement of external route summary.	Enumerationr/w Enumerated Values: 1 doNotAdvertise 2 advertise	.1.3.6.1.4.1.8886.1.47.2.12.1.3
raisecomOspfExternalAggregateCost It indicates the cost of d external route summary.	BigMetricr/w Type Constraints: range: 0..16777215	.1.3.6.1.4.1.8886.1.47.2.12.1.4
raisecomOspfExternalAggregateStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.47.2.12.1.5

The OSPF Process's link state database (LSDB).
The LSDB contains the link state advertisements
from throughout the areas that the device is attached to.

raisecomOspfLsdbEntry row .1.3.6.1.4.1.8886.1.47.2.13.1

A single link state advertisement.

Indexes

raisecomOspfProcessId raisecomOspfLsdbAreaId raisecomOspfLsdbType raisecomOspfLsdbLsId raisecomOspfLsdbRouterId

Column	Syntax	OID
raisecomOspfLsdbAreaId The 32-bit identifier of the area from which the LSA was received.	AreaID	.1.3.6.1.4.1.8886.1.47.2.13.1.1
raisecomOspfLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format. Note: External link state advertisements are permitted for backward compatibility, but should be display…	Enumeration Enumerated Values: 1 routerLink 2 networkLink 3 summaryLink 4 asSummaryLink 5 asExternalLink 6 multicastLink 7 nssaExternalLink 10 areaOpaqueLink	.1.3.6.1.4.1.8886.1.47.2.13.1.2
raisecomOspfLsdbLsId The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.13.1.3
raisecomOspfLsdbRouterId The 32-bit number that uniquely identifies the originating router in the Autonomous System.	RouterID	.1.3.6.1.4.1.8886.1.47.2.13.1.4
raisecomOspfLsdbSequence The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.13.1.5
raisecomOspfLsdbAge This field is the age of the link state advertisement in seconds.	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.13.1.6
raisecomOspfLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksu…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.13.1.7
raisecomOspfLsdbAdvertisement The entire link state advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.8886.1.47.2.13.1.8

The OSPF Process's AS-scope LSA link state database.
The database contains the AS-scope Link State
Advertisements from throughout the areas that
the device is attached to.
          
This table is identical to the OSPF LSDB Table
in format, but contains only AS-scope Link State
Advertisements.  The purpose is to allow AS-scope
LSAs to be displayed once for the router rather
than once in each non-stub area.

raisecomOspfAsLsdbEntry row .1.3.6.1.4.1.8886.1.47.2.14.1

A single link state advertisement.

Indexes

raisecomOspfProcessId raisecomOspfAsLsdbType raisecomOspfAsLsdbLsId raisecomOspfAsLsdbRouterId

Column	Syntax	OID
raisecomOspfAsLsdbType The type of the link state advertisement. Each link state type has a separate advertisement format.	Enumeration Enumerated Values: 5 asExternalLink	.1.3.6.1.4.1.8886.1.47.2.14.1.1
raisecomOspfAsLsdbLsId The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.14.1.2
raisecomOspfAsLsdbRouterId The 32-bit number that uniquely identifies the originating router in the Autonomous System.	RouterID	.1.3.6.1.4.1.8886.1.47.2.14.1.3
raisecomOspfAsLsdbSequence The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.14.1.4
raisecomOspfAsLsdbAge This field is the age of the link state advertisement in seconds.	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.14.1.5
raisecomOspfAsLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksu…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.14.1.6
raisecomOspfAsLsdbAdvertisement The entire link state advertisement, including its header.	OctetString Constraints: range: 1-65535	.1.3.6.1.4.1.8886.1.47.2.14.1.7

This table maintains per-area, per-LSA-type counters

raisecomOspfAreaLsaCountEntry row .1.3.6.1.4.1.8886.1.47.2.15.1

An entry with a number of link advertisements
of a given type for a given area.

Indexes

raisecomOspfProcessId raisecomOspfAreaLsaCountAreaId raisecomOspfAreaLsaCountLsaType

Column	Syntax	OID
raisecomOspfAreaLsaCountAreaId This entry Area ID.	AreaID	.1.3.6.1.4.1.8886.1.47.2.15.1.1
raisecomOspfAreaLsaCountLsaType This entry LSA type.	Enumeration Enumerated Values: 1 routerLink 2 networkLink 3 summaryLink 4 asSummaryLink 6 multicastLink 7 nssaExternalLink 10 areaOpaqueLink	.1.3.6.1.4.1.8886.1.47.2.15.1.2
raisecomOspfAreaLsaCountNumber Number of LSAs of a given type for a given area.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8886.1.47.2.15.1.3

Import external route to ospf protocol.

raisecomOspfRedistributeEntry row .1.3.6.1.4.1.8886.1.47.2.16.1

Define an entry in the raisecomOspfRedistributeTable

Indexes

raisecomOspfProcessId raisecomOspfRedistributeProtocol raisecomOspfRedistributeProcessId

Column	Syntax	OID
raisecomOspfRedistributeProtocol Route protocol to import, only support static, connect, rip and ospf now.	Enumeration Enumerated Values: 2 local 3 netmgmt 8 rip 13 ospf	.1.3.6.1.4.1.8886.1.47.2.16.1.1
raisecomOspfRedistributeProcessId Process id of import route protocol, only support ospf.	ProcessID Type Constraints: range: 1..5	.1.3.6.1.4.1.8886.1.47.2.16.1.2
raisecomOspfRedistributeCost The cost of import route.	BigMetricr/w Type Constraints: range: 0..16777215	.1.3.6.1.4.1.8886.1.47.2.16.1.3
raisecomOspfRedistributeType The type of external route.	Enumerationr/w Enumerated Values: 1 e1 2 e2	.1.3.6.1.4.1.8886.1.47.2.16.1.4
raisecomOspfRedistributeStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.47.2.16.1.5
raisecomOspfRedistributeRouteMapName Specify a route-map.	OctetStringr/w Constraints: range: 1-19	.1.3.6.1.4.1.8886.1.47.2.16.1.6
raisecomOspfRedistributeTag Set tag of route.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.8886.1.47.2.16.1.7

The table generate or delete the default route.

raisecomOspfDefaultInfoEntry row .1.3.6.1.4.1.8886.1.47.2.17.1

Define an entry in the raisecomOspfDefaultInfoTable

Indexes

raisecomOspfProcessId

Column	Syntax	OID
raisecomOspfDefaultInfoAlways Whether always inform default route.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.8886.1.47.2.17.1.1
raisecomOspfDefaultInfoCost It indicates the cost of default route.	BigMetricr/w Type Constraints: range: 0..16777215	.1.3.6.1.4.1.8886.1.47.2.17.1.2
raisecomOspfDefaultInfoType It indicates the type of default route.	Enumerationr/w Enumerated Values: 1 e1 2 e2	.1.3.6.1.4.1.8886.1.47.2.17.1.3
raisecomOspfDefaultInfoStatus This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.47.2.17.1.4

The table is used to storage all kinds of 
input and output packet statistical information of 
OSPF process.

raisecomOspfPacketIoStatisEntry row .1.3.6.1.4.1.8886.1.47.2.18.1

Define an entry in the raisecomOspfPacketIoStatisTable

Indexes

raisecomOspfProcessId raisecomOspfPacketIoStatisIoType raisecomOspfPacketIoStatisPktType

Column	Syntax	OID
raisecomOspfPacketIoStatisIoType It has been used to describe the IO direction of packet.	Enumeration Enumerated Values: 1 input 2 output	.1.3.6.1.4.1.8886.1.47.2.18.1.1
raisecomOspfPacketIoStatisPktType It has been used to describe the type of OSPF packet.	Enumeration Enumerated Values: 1 hello 2 dbDescript 3 lsReq 4 lsUpdate 5 lsAck	.1.3.6.1.4.1.8886.1.47.2.18.1.2
raisecomOspfPacketIoStatisNumber The number indicates the number of specified type of packets on input or output direction.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.18.1.3

The table is used to storage OSPF calculation of routing table.

raisecomOspfRouteEntry row .1.3.6.1.4.1.8886.1.47.2.19.1

Define an entry in the raisecomOspfRouteTable

Indexes

raisecomOspfProcessId raisecomOspfRouteDest raisecomOspfRouteMask raisecomOspfRouteType

Column	Syntax	OID
raisecomOspfRouteDest It has been used to describe the destination address of an ospf route.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.19.1.1
raisecomOspfRouteMask It has been used to describe the mask of an ospf route.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.19.1.2
raisecomOspfRouteType It has been used to describe the type of an ospf route.	Enumeration Enumerated Values: 1 network 2 ase 3 nssa	.1.3.6.1.4.1.8886.1.47.2.19.1.3
raisecomOspfRouteLsType It has been used to describe the LSA type of a router.	Enumeration Enumerated Values: 0 stub 1 routerLink 2 networkLink 3 summaryLink 4 asSummaryLink 5 asExternalLink 6 multicastLink 7 nssaExternalLink 10 areaOpaqueLink	.1.3.6.1.4.1.8886.1.47.2.19.1.4
raisecomOspfRouteMetric It has been used to describe the metric of an ospf route.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.19.1.5
raisecomOspfRouteNextHop It has been used to describe the nexthop address of an ospf route.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.19.1.6
raisecomOspfRouteAdvRtr It has been used to describe the advertising router of an ospf route.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.19.1.7
raisecomOspfRouteArea It has been used to describe the ccmputing area of an ospf route.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.19.1.8

The table is used to storage the imformation of boder router.

raisecomOspfBdrRouteEntry row .1.3.6.1.4.1.8886.1.47.2.20.1

Define an entry in the raisecomOspfBdrRouteTable

Indexes

raisecomOspfProcessId raisecomOspfBdrRouteRtrType raisecomOspfBdrRouteArea raisecomOspfBdrRouteDest raisecomOspfBdrRouteNextHop

Column	Syntax	OID
raisecomOspfBdrRouteRtrType It has been used to describe the type of a boder router.	Enumeration Enumerated Values: 1 asbr 2 abr 3 sumasbr	.1.3.6.1.4.1.8886.1.47.2.20.1.1
raisecomOspfBdrRouteArea It has been used to describe the area of a boder router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.20.1.2
raisecomOspfBdrRouteDest It has been used to describe the boder router by it's router id.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.20.1.3
raisecomOspfBdrRouteNextHop IIt has been used to describe the nexthop router to reach a boder router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.8886.1.47.2.20.1.4
raisecomOspfBdrRouteLsType It has been used to describe the LSA type of a boder router.	Enumeration Enumerated Values: 1 routerLink 2 networkLink 3 summaryLink 4 asSummaryLink 5 asExternalLink 6 multicastLink 7 nssaExternalLink 10 areaOpaqueLink	.1.3.6.1.4.1.8886.1.47.2.20.1.5
raisecomOspfBdrRouteMetric It has been used to describe the metric to a boder router.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.20.1.6

The table is used to config and check distribute-in policy.

raisecomOspfDistributeListInEntry row .1.3.6.1.4.1.8886.1.47.2.21.1.1

Define an entry in the raisecomOspfDistributeListInTable

Indexes

raisecomOspfProcessId

Column	Syntax	OID
raisecomOspfDistrInIpPrefixListName Filter incoming routing updates,the value of this object indicates the name of an ip-prefix-list.	OctetStringr/w Constraints: range: 1-19	.1.3.6.1.4.1.8886.1.47.2.21.1.1.1
raisecomOspfDistrInAclNum Filter incoming routing updates by the IP ACL number of OSPF distribute-in policy, -1 is a value to inditace no setting of acl.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.21.1.1.2
raisecomOspfDistrInRowStatus This object permits management of the table by facilitating actions such as row creation,construction, and destruction.The value of this object has no effect on whether other objects in this conceptual row can be modi…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.47.2.21.1.1.3

The table is used to config and check distribute-out policy.

raisecomOspfDistributeListOutEntry row .1.3.6.1.4.1.8886.1.47.2.21.2.1

Define an entry in the raisecomOspfDistributeListOutTable

Indexes

raisecomOspfProcessId

Column	Syntax	OID
raisecomOspfDistrOutIpPrefixListName Filter outgoing routing updates,the value of this object indicates the name of an ip-prefix-list.	OctetStringr/w Constraints: range: 1-19	.1.3.6.1.4.1.8886.1.47.2.21.2.1.1
raisecomOspfDistrOutAclNum Filter incoming outgoing updates by the IP ACL number of OSPF distribute-out policy, -1 is a value to inditace no setting of acl.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.21.2.1.2
raisecomOspfDistrOutRowStatus This object permits management of the table by facilitating actions such as row creation,construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be mo…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.47.2.21.2.1.3

The table is used to config and check distribute-out policy based on protocol.

raisecomOspfDistributeListOutProtocolEntry row .1.3.6.1.4.1.8886.1.47.2.21.3.1

Define an entry in the raisecomOspfDistributeListOutProtocolTable

Indexes

raisecomOspfProcessId raisecomOspfDistrOutProtocol raisecomOspfDistrOutProcessId

Column	Syntax	OID
raisecomOspfDistrOutProtocol Imported route protocol, only support static, connect, rip and ospf now.	Enumeration Enumerated Values: 2 local 3 netmgmt 8 rip 13 ospf	.1.3.6.1.4.1.8886.1.47.2.21.3.1.1
raisecomOspfDistrOutProcessId Process id of imported route protocol, only support ospf.	ProcessID Type Constraints: range: 1..5	.1.3.6.1.4.1.8886.1.47.2.21.3.1.2
raisecomOspfDistrOutProIpPrefixListName Filtering outgoing updates based on imported protocol, the value of this object indicates the name of an ip-prefix-list.	OctetStringr/w Constraints: range: 1-19	.1.3.6.1.4.1.8886.1.47.2.21.3.1.3
raisecomOspfDistrOutProAclNum Filtering outgoing updates based on imported protocol, the value of this object indicates the IP ACL number, -1 is a value to inditace no setting of acl.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.8886.1.47.2.21.3.1.4
raisecomOspfDistrOutProRowStatus This object permits management of the table by facilitating actions such as row creation,construction, and destruction.The value of this object has no effect on whether other objects in this conceptual row can be mod…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.8886.1.47.2.21.3.1.5