RAISECOM-LOOPBACK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
21

rcLoopbackPortTable

table
.1.3.6.1.4.1.8886.6.1.73.1 · 1 row entry · 8 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcLoopbackPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-LOOPBACK-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-LOOPBACK-MIB::rcLoopbackPortTable' 
This table contains LoopBack control data.
rcLoopbackPortEntry row .1.3.6.1.4.1.8886.6.1.73.1.1
Indexes
Column Syntax OID
rcLoopbackPortIndex
An index based on the equipment port number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.73.1.1.1
rcLoopbackPortEnable
Specifies the status of Loopback.0:disable,1:l1 l2 l3 enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8886.6.1.73.1.1.2
rcLoopbackPortMode
Specifies the status of Loopback.1:l1,2:l2,3:l3
Enumerationr/w
Enumerated Values:
1l1
2l2
3l3
 .1.3.6.1.4.1.8886.6.1.73.1.1.3
rcLoopbackPortStatistics
The statistics of loopback packet.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.73.1.1.4
rcLoopbackPortClearStatistics
Clear the statistics of loopback packet.0:disable,1:enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8886.6.1.73.1.1.5
rcLoopbackPortSmac
Specifies the destination MAC address of L2 Loopback.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.8886.6.1.73.1.1.6
rcLoopbackPortProtocol
Specifies the protocol of L2 Loopback.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.73.1.1.7
rcLoopbackPortVlan
vlan of L2 Loopback.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.73.1.1.8

rcL2LoopbackPortTable

table
.1.3.6.1.4.1.8886.6.1.73.2 · 1 row entry · 6 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcL2LoopbackPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-LOOPBACK-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-LOOPBACK-MIB::rcL2LoopbackPortTable' 
This table contains L2 Loopback control data.
rcL2LoopbackPortEntry row .1.3.6.1.4.1.8886.6.1.73.2.1
Indexes
Column Syntax OID
rcL2LoopbackPortNum
An index based on the loopback rule number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.73.2.1.1
rcL2LoopbackPortStatistics
The statistics of loopback packet.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.73.2.1.2
rcL2LoopbackPortSmac
Specifies the destination MAC address of L2 Loopback.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.8886.6.1.73.2.1.3
rcL2LoopbackPortProtocol
Specifies the protocol of L2 Loopback.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.73.2.1.4
rcL2LoopbackPortVlan
vlan of L2 Loopback.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.73.2.1.5
rcL2LoopbackPortStatus
Row status of loopback rule.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8886.6.1.73.2.1.6

rcL3LoopbackPortTable

table
.1.3.6.1.4.1.8886.6.1.73.3 · 1 row entry · 7 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcL3LoopbackPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-LOOPBACK-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-LOOPBACK-MIB::rcL3LoopbackPortTable' 
This table contains L3 Loopback control data.
rcL3LoopbackPortEntry row .1.3.6.1.4.1.8886.6.1.73.3.1
Indexes
Column Syntax OID
rcL3LoopbackPortNum
An index based on the L3 loopback rule number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.73.3.1.1
rcL3LoopbackPortDestAddr
Specifies the Destination ip address of L3 Loopback.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.6.1.73.3.1.2
rcL3LoopbackPortMAC
Specifies the next hop MAC address of L3 Loopback.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.8886.6.1.73.3.1.3
rcL3LoopbackPortSvlan
Svlan of L3 Loopback.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.73.3.1.4
rcL3LoopbackPortCvlan
Cvlan of L3 Loopback.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.73.3.1.5
rcL3LoopbackPortDscp
Dscp of L3 Loopback.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.8886.6.1.73.3.1.6
rcL3LoopbackPortStatus
Row status of L3 loopback rule.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8886.6.1.73.3.1.7