RAISECOM-L2CP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
18

rcL2cpProfileTable

table
.1.3.6.1.4.1.8886.6.1.71.2 · 1 row entry · 4 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcL2cpProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-L2CP-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-L2CP-MIB::rcL2cpProfileTable' 
This table contains information about the profile.
rcL2cpProfileEntry row .1.3.6.1.4.1.8886.6.1.71.2.1
Information about the profile. This table will create
a profile which only contains its description, the
actions of each protocol is defined in the associated
table rcL2cpProfileActionTable.
Indexes
Column Syntax OID
rcL2cpProfileNumber
An index that uniquely identifies an entry in the l2cp
profile table.
Integer32
Constraints:
range: 1-19
 .1.3.6.1.4.1.8886.6.1.71.2.1.1
rcL2cpProfileDescription
Specifies description of profile.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.8886.6.1.71.2.1.2
rcL2cpProfileRef
The value descrides how many times the profile is in use.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.71.2.1.3
rcL2cpProfileStatus
The status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8886.6.1.71.2.1.4

rcL2cpProfileActionTable

table
.1.3.6.1.4.1.8886.6.1.71.3 · 1 row entry · 4 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcL2cpProfileActionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-L2CP-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-L2CP-MIB::rcL2cpProfileActionTable' 
This table contains information about types of disposal of given
protocols, this table supplies supplementary specification to 
the table rcL2cpProfileTable.Action 'tunnel' is not support when 
packets' da mac is one of 0180.c200.0004-06,08-0c,0f or 20to2f.
rcL2cpProfileActionEntry row .1.3.6.1.4.1.8886.6.1.71.3.1
Information about types of disposal of given protocols. The
entries will be on a per profile, per protocol basis.
Indexes
Column Syntax OID
rcL2cpProfileActionProfileIndex
The profile index that identifies an entry in the
profile action table.
Integer32
Constraints:
range: 1-19
 .1.3.6.1.4.1.8886.6.1.71.3.1.1
rcL2cpProfileActionProtocolIndex
The protocol index that identifies an entry in the
profile action table.
Enumeration
Enumerated Values:
1stp
2slow-protocol
3dot1x
4elmi
5lldp
6sisco
7daMac0180-C200-0004
8daMac0180-C200-0005
9daMac0180-C200-0006
10daMac0180-C200-0008
11daMac0180-C200-0009
12daMac0180-C200-000a
13daMac0180-C200-000b
14daMac0180-C200-000c
15daMac0180-C200-000d
16daMac0180-C200-000f
17daMac0180-C200-0020to2f
18lacp
19lamp
20link-oam
21esmc
 .1.3.6.1.4.1.8886.6.1.71.3.1.2
rcL2cpProfileActionProtocolAction
Specified types of disposal of received BPDU packets by the port in the
ingress direction. Action 'tunnel' is not support when packets' da mac is
one of 0180.c200.0004-06,08-0c,0f or 20to2f.
Enumerationr/w
Enumerated Values:
0forward
1peer
2discard
3tunnel
4forward-statistics
 .1.3.6.1.4.1.8886.6.1.71.3.1.3
rcL2cpProfileActionProtocolCos
Specified cos priority of received BPDU packets by the port in the ingress
direction, value -1 indicates no cos priority is assigned.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.8886.6.1.71.3.1.4

rcL2cpPortCfgTable

table
.1.3.6.1.4.1.8886.6.1.71.4 · 1 row entry · 4 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcL2cpPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-L2CP-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-L2CP-MIB::rcL2cpPortCfgTable' 
This table contains information about the index of profile 
applied by one port and the status of bpdu tunnel terminal
of this port and statistics-clearing status of Bpdu packet 
through this port.
rcL2cpPortCfgEntry row .1.3.6.1.4.1.8886.6.1.71.4.1
Information about about the index of profile applied by one
port and the status of bpdu tunnel terminal of this port
and statistics-clearing status of Bpdu packet through this
port. The entries will be on a per port ba…
Indexes
Column Syntax OID
rcL2cpPortIndex
The port index that identifies an entry in the
port process table.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.8886.6.1.71.4.1.1
rcL2cpPortProfileID
The profile ID applied by this port, value zero(0) specifies
that no profile is applied.
Integer32r/w
Constraints:
range: 0-19
 .1.3.6.1.4.1.8886.6.1.71.4.1.2
rcL2cpPortTerminal
Specified the status of bpdu tunnel terminal.1:enable,2:disable
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.71.4.1.3
rcL2cpPortClearStats
Clear the statistics of bpdu packets through this port.1:enable,2:disable
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.8886.6.1.71.4.1.4

rcL2cpStatsTable

table
.1.3.6.1.4.1.8886.6.1.71.5 · 1 row entry · 3 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcL2cpStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-L2CP-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-L2CP-MIB::rcL2cpStatsTable' 
This table contains protocol statistics on the interface.
rcL2cpStatsEntry row .1.3.6.1.4.1.8886.6.1.71.5.1
Protocol statistics on the interface.
Indexes
Column Syntax OID
rcL2cpStatsPortIndex
The port index that identifies an entry in the
protocol statistics table.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.8886.6.1.71.5.1.1
rcL2cpStatsProtocolIndex
Protocol index that identifies an entry in the
protocol statistics table.
Enumeration
Enumerated Values:
1stp
2slow-protocol
3dot1x
4elmi
5lldp
6sisco
7daMac0180-C200-0004
8daMac0180-C200-0005
9daMac0180-C200-0006
10daMac0180-C200-0008
11daMac0180-C200-0009
12daMac0180-C200-000a
13daMac0180-C200-000b
14daMac0180-C200-000c
15daMac0180-C200-000d
16daMac0180-C200-000f
17daMac0180-C200-0020to2f
 .1.3.6.1.4.1.8886.6.1.71.5.1.2
rcL2cpStatsProtocolStats
The PDU statistics of an interface. These statistics cover
the number of ingress PDUs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.71.5.1.3

rcL2cpPortVlanCfgTable

table
.1.3.6.1.4.1.8886.6.1.71.6 · 1 row entry · 3 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcL2cpPortVlanCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-L2CP-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-L2CP-MIB::rcL2cpPortVlanCfgTable' 
This table contains information about disposal of vlan tagged l2cp pkt 
received by a port.
rcL2cpPortVlanCfgEntry row .1.3.6.1.4.1.8886.6.1.71.6.1
Protocol statistics on the interface.
Indexes
Column Syntax OID
rcL2cpPortVlanCfgPortIndex
The first index that uniquely identifies an entry
in the Port Vlan L2CP Config table.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.8886.6.1.71.6.1.1
rcL2cpPortVlanCfgVlanIndex
The second index that uniquely identifies an
entry in the Port Vlan L2CP Config table.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.8886.6.1.71.6.1.2
rcL2cpPortVlanCfgL2cpProcess
Specified types of disposal of received BPDU packets with
specified vlan tag by the port in the ingress direction.
Enumerationr/w
Enumerated Values:
0forward
1peer
 .1.3.6.1.4.1.8886.6.1.71.6.1.3