RAISECOM-CFM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
23
Rows
23
Columns
183

rcCfmIfTable

table
.1.3.6.1.4.1.8886.6.1.26.2 · 1 row entry · 3 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmIfTable'
CFM Interface table
rcCfmIfEntry row .1.3.6.1.4.1.8886.6.1.26.2.1
An entry in the rcCfmIfTable. It contains
CFM status in each interface port.
Indexes
Column Syntax OID
This object represents the Bridge Port or
aggregated port on which MEPs or MHFs might
be configured.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.8886.6.1.26.2.1.1
The administrative value of the interface.
A value of enable(1) indicates that interface
should enable CFM. disable(2) indicates that
interface should disable CFM.
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
.1.3.6.1.4.1.8886.6.1.26.2.1.2
rcCfmIfMipLeveldeprecated
The level on which the mip is configured.
The value of -1 indicates that no mip is configured
on the port or you must delete the mip configured on the port.
The other value (0-7) indicates that a mip need to
be confi…
IEEE8021-CFM-MIBDot1agCfmMDLevelOrNoner/w
Type Constraints:
range: -1..7
.1.3.6.1.4.1.8886.6.1.26.2.1.3

rcCfmMdTable

table
.1.3.6.1.4.1.8886.6.1.26.3 · 1 row entry · 1 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmMdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmMdTable'
CFM Md Table
rcCfmMdEntry row .1.3.6.1.4.1.8886.6.1.26.3.1
An entry in the rcCfmMdTable. It contains
clearing remote MEP database operation.
Column Syntax OID
Clear Remote MP in CC database
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8886.6.1.26.3.1.1
.1.3.6.1.4.1.8886.6.1.26.4 · 1 row entry · 10 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmErrorCcmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmErrorCcmTable'
CFM Error CCM Table
rcCfmErrorCcmEntry row .1.3.6.1.4.1.8886.6.1.26.4.1
An entry in the rcCfmIfTable. It contains
error CCM data received.
Column Syntax OID
The index to the Error CCM table. Maintenance association End Point Identifier field of the
received CCM PDU that has some defect.
IEEE8021-CFM-MIBDot1agCfmMepId
Type Constraints:
range: 1..8191
.1.3.6.1.4.1.8886.6.1.26.4.1.1
The index to the Error CCM table. The index value
should keep increasing up to the time that they wrap
around. This is to facilitate access control based on OID.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.8886.6.1.26.4.1.2
Maintenance Domain Level field of the received CCM PDU
that has some defect.
IEEE8021-CFM-MIBDot1agCfmMDLevel
Type Constraints:
range: 0..7
.1.3.6.1.4.1.8886.6.1.26.4.1.3
The VLAN ID associated with the MA Name field of the
received CCM PDU that has some defect.
Q-BRIDGE-MIBVlanIdOrNone
Type Constraints:
range: 0..4094
.1.3.6.1.4.1.8886.6.1.26.4.1.4
The name of the domain in which the error ccm is received
OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.8886.6.1.26.4.1.5
Maintenance Domain name and Maintenance Association name
conveyed in the received CCM PDU that has some defect constitute
MAID and the domain name and association name using
conjunctive character '-', for example, …
OctetString
Constraints:
range: 1-44
.1.3.6.1.4.1.8886.6.1.26.4.1.6
Source MAC address field of the received CCM PDU that has
some defect.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.8886.6.1.26.4.1.7
Error type of defects in the received CCM PDU.
IEEE8021-CFM-MIBDot1agCfmMepDefects
Type Values:
0bDefRDICCM
1bDefMACstatus
2bDefRemoteCCM
3bDefErrorCCM
4bDefXconCCM
.1.3.6.1.4.1.8886.6.1.26.4.1.8
Storage time (s) of defects in the ERROR CCM DB.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.8886.6.1.26.4.1.9
Clear fault CCM in CC database
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8886.6.1.26.4.1.10
.1.3.6.1.4.1.8886.6.1.26.5 · 1 row entry · 2 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmLtmDbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmLtmDbTable'
CFM Ltm Database Table
rcCfmLtmDbEntry row .1.3.6.1.4.1.8886.6.1.26.5.1
An entry in the rcCfmLtmDbTable.
Column Syntax OID
The index to the Ltm Db table. This is to facilitate access control based on OID.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.8886.6.1.26.5.1.1
Target Mac Address conveyed in the LTM PDU which has been sent.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.8886.6.1.26.5.1.2
.1.3.6.1.4.1.8886.6.1.26.6 · 1 row entry · 1 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmMepDbExTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmMepDbExTable'
CFM MEP Datebase Extended Table
rcCfmMepDbExEntry row .1.3.6.1.4.1.8886.6.1.26.6.1
An entry in the rcCfmMepDbExTable.
Column Syntax OID
The time of the remote MEP's information which has been storaged
in MEP CCM Database.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.8886.6.1.26.6.1.1

rcCfmMaCciEnableTable

table deprecated
.1.3.6.1.4.1.8886.6.1.26.7 · 1 row entry · 3 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmMaCciEnableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmMaCciEnableTable'
CFM MEP Datebase Extended Table
rcCfmMaCciEnableEntry row .1.3.6.1.4.1.8886.6.1.26.7.1
An entry in the rcCfmMepDbExTable.
Column Syntax OID
rcCfmMaMdLeveldeprecated
Level of The Maintenance Domain that the MA belong to
IEEE8021-CFM-MIBDot1agCfmMDLevel
Type Constraints:
range: 0..7
.1.3.6.1.4.1.8886.6.1.26.7.1.1
rcCfmMaMaVlanIddeprecated
The Primary VLAN ID with which the Maintenance Association is associated
Q-BRIDGE-MIBVlanIdOrNone
Type Constraints:
range: 0..4094
.1.3.6.1.4.1.8886.6.1.26.7.1.2
If set to true, All MEP belong to the MA will generate CCM messages.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8886.6.1.26.7.1.3
.1.3.6.1.4.1.8886.6.1.26.8 · 1 row entry · 8 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmMepExTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmMepExTable'
CFM MEP Extended Table
rcCfmMepExEntry row .1.3.6.1.4.1.8886.6.1.26.8.1
An entry in the rcCfmMepTable.
Column Syntax OID
The total number of Lbrs revieving timeout.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.8886.6.1.26.8.1.1
The length of Lbm data tlv .
Unsigned32r/w
Constraints:
range: 1-1484
.1.3.6.1.4.1.8886.6.1.26.8.1.2
If set rcCfmMepExLckAdmin_enabled(1),The mep
can transmit lck packet when starting the lck
functionIf set rcCfmMepExLckAdmin_diabled (2),
The mep must not transmit lck packet whatever
starting or stopping the lck fun…
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
.1.3.6.1.4.1.8886.6.1.26.8.1.3
It is read-only. When receiving the ais or lck packet,
the value is rcCfmMaExAisSuppressStatus_WAITING (1).
And when the fault is detected, the value is
rcCfmMaExAisSuppressStatus_SUPPRESSED (2).
If not receiving th…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.8886.6.1.26.8.1.4
If set rcCfmMaExAisSuppressAdmin_enabled (1), The mep can suppress alarm trap.
If set rcCfmMaExAisSuppressAdmin_diabled (2), The mep must not suppress alarm trap.
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
.1.3.6.1.4.1.8886.6.1.26.8.1.5
The priority of CFM pdu
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.8886.6.1.26.8.1.6
If set rcCfmMepExPmAdmin _enabled (1), The mep can support DM/LM measurement.
If set rcCfmMepExPmAdmin _disabled (2), The mep must not support DM/LM measurement.
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
.1.3.6.1.4.1.8886.6.1.26.8.1.7
If set rcCfmMepExRdiAdmin _enabled (1), when the associated port of mep is down??it can support to add RDI flag in the CCM.
If set rcCfmMepExRdiAdmin _disabled (2), The mep must not support the RDI flag.
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
.1.3.6.1.4.1.8886.6.1.26.8.1.8
.1.3.6.1.4.1.8886.6.1.26.9 · 1 row entry · 3 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmMaMepListExTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmMaMepListExTable'
CFM Ma MEP List Extended Table
rcCfmMaMepListExEntry row .1.3.6.1.4.1.8886.6.1.26.9.1
An entry in the rcCfmMepTable.
Column Syntax OID
mep type in the mep list.
Enumerationr/w
Enumerated Values:
1local
2static-remote
3dynamic-remote
.1.3.6.1.4.1.8886.6.1.26.9.1.1
mep mac address in mep list.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.8886.6.1.26.9.1.2
interface index for static remote mep in port mode.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.8886.6.1.26.9.1.3
.1.3.6.1.4.1.8886.6.1.26.10 · 1 row entry · 5 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmMaNetExTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmMaNetExTable'
CFM Ma net Extended Table
rcCfmMaNetExEntry row .1.3.6.1.4.1.8886.6.1.26.10.1
An entry in the rcCfmMaNetExTable.
Column Syntax OID
status of remote mep learning. the value of true indicates that
mep in this ma can recieve unknown remote mep ccm pdu; the value
of false indicates that mep in this ma can not recieve unknown
remote mep ccm pdu.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8886.6.1.26.10.1.1
costumer vlan in oam pdu. the value of 0 indicates oam Pdu transmited
without costumer vlan.
Q-BRIDGE-MIBVlanIdOrNoner/w
Type Constraints:
range: 0..4094
.1.3.6.1.4.1.8886.6.1.26.10.1.2
The pdu Priority. default priority is 6.
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.8886.6.1.26.10.1.3
Remote MEP Learn function is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8886.6.1.26.10.1.4
check remote mep mpid in CCM.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8886.6.1.26.10.1.5

rcCfmPMTable

table deprecated
.1.3.6.1.4.1.8886.6.1.26.11 · 1 row entry · 17 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmPMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmPMTable'
CFM Performance monitor Table
rcCfmPMEntry row .1.3.6.1.4.1.8886.6.1.26.11.1
An entry in the rcCfmPMTable.
Column Syntax OID
rcCfmPMEnableddeprecated
performace monitor function enable
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8886.6.1.26.11.1.1
DMM pdu transmit period.
Enumeration
Enumerated Values:
0intervalInvalid
1interval300Hz
2interval10ms
3interval100ms
4interval1s
5interval10s
6interval1min
7interval10min
.1.3.6.1.4.1.8886.6.1.26.11.1.2
PM delay object.
Unsigned32r/w
Constraints:
range: 0-1000
.1.3.6.1.4.1.8886.6.1.26.11.1.3
PM delay variation object.
Unsigned32r/w
Constraints:
range: 0-1000
.1.3.6.1.4.1.8886.6.1.26.11.1.4
frame loss ratio rising threshold, if 15 minutes
statistics above this value, a notification will be send.
Enumerationr/w
Enumerated Values:
0threshold0
1threshold1PerSouthend
2threshold2PerSouthend
3threshold5PerSouthend
4threshold1PerHundrud
5threshold2PerHundrud
6threshold5PerHundrud
7threshold1
.1.3.6.1.4.1.8886.6.1.26.11.1.5
frame loss ratio falling threshold, if 15 minutes
statistics below this value, a notification will be send.
Enumerationr/w
Enumerated Values:
0threshold0
1threshold1PerSouthend
2threshold2PerSouthend
3threshold5PerSouthend
4threshold1PerHundrud
5threshold2PerHundrud
6threshold5PerHundrud
7threshold1
.1.3.6.1.4.1.8886.6.1.26.11.1.6
delay rising threshold, if 15 minutes
statistics above this value, a notification will be send.
Enumerationr/w
Enumerated Values:
0threshold0
1threshold1PerSouthend
2threshold2PerSouthend
3threshold5PerSouthend
4threshold1PerHundrud
5threshold2PerHundrud
6threshold5PerHundrud
7threshold1
.1.3.6.1.4.1.8886.6.1.26.11.1.7
delay falling threshold, if 15 minutes
statistics below this value, a notification will be send.
Enumerationr/w
Enumerated Values:
0threshold0
1threshold1PerSouthend
2threshold2PerSouthend
3threshold5PerSouthend
4threshold1PerHundrud
5threshold2PerHundrud
6threshold5PerHundrud
7threshold1
.1.3.6.1.4.1.8886.6.1.26.11.1.8
delay variation rising threshold, if 15 minutes
statistics above this value, a notification will be send.
Enumerationr/w
Enumerated Values:
0threshold0
1threshold1PerSouthend
2threshold2PerSouthend
3threshold5PerSouthend
4threshold1PerHundrud
5threshold2PerHundrud
6threshold5PerHundrud
7threshold1
.1.3.6.1.4.1.8886.6.1.26.11.1.9
delay variation falling threshold, if 15 minutes
statistics below this value, a notification will be send.
Enumerationr/w
Enumerated Values:
0threshold0
1threshold1PerSouthend
2threshold2PerSouthend
3threshold5PerSouthend
4threshold1PerHundrud
5threshold2PerHundrud
6threshold5PerHundrud
7threshold1
.1.3.6.1.4.1.8886.6.1.26.11.1.10
clear performance monitor statistics in the service.
Enumerationr/w
Enumerated Values:
0all
1frame-loss-ratio
2delay
3delay-variation
.1.3.6.1.4.1.8886.6.1.26.11.1.11
performance monitor notification enable status.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8886.6.1.26.11.1.12
ITU-T Y.1731 throughput(rfc2544) test timeout period, unit second.
Unsigned32r/w
Constraints:
range: 2-30
.1.3.6.1.4.1.8886.6.1.26.11.1.13
ITU-T Y.1731 throughput(rfc2544) test expected
Object band-wide, unit kbps.
Unsigned32r/w
Constraints:
range: 125-1000000
.1.3.6.1.4.1.8886.6.1.26.11.1.14
ITU-T Y.1731 throughput(rfc2544) test pdu length.
Enumerationr/w
Enumerated Values:
0length64
1length128
2length256
3length512
4length1024
5length1280
6length1518
.1.3.6.1.4.1.8886.6.1.26.11.1.15
ITU-T Y.1731 throughput(rfc2544) test enable.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.8886.6.1.26.11.1.16
the row status of rcCfmPMTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.8886.6.1.26.11.1.17

rcCfmPMFLRTotalTable

table deprecated
.1.3.6.1.4.1.8886.6.1.26.12 · 1 row entry · 9 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmPMFLRTotalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmPMFLRTotalTable'
CFM Performance monitor Table
rcCfmPMFLRTotalEntry row .1.3.6.1.4.1.8886.6.1.26.12.1
An entry in the rcCfmPMTable.
Column Syntax OID
total second passed since performance monitor enabled.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.12.1.1
total far end frames transmited since performance monitor enabled.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.12.1.2
total far end frames lost since performance monitor enabled.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.12.1.3
total far end frame lost ratio since performance monitor enabled.
Unsigned32
Constraints:
range: 0-1000
.1.3.6.1.4.1.8886.6.1.26.12.1.4
total far end unaviable second since performance monitor enabled.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.12.1.5
total near end frames transmited since performance monitor enabled.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.12.1.6
total near end frames lost since performance monitor enabled.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.12.1.7
total near end frames lost ratio since performance monitor enabled.
Unsigned32
Constraints:
range: 0-1000
.1.3.6.1.4.1.8886.6.1.26.12.1.8
total near end unaviable seconds since performance monitor enabled.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.12.1.9

rcCfmPMFLRCurrentTable

table deprecated
.1.3.6.1.4.1.8886.6.1.26.13 · 1 row entry · 8 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmPMFLRCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmPMFLRCurrentTable'
CFM Performance monitor frame loss ratio current table
rcCfmPMFLRCurrentEntry row .1.3.6.1.4.1.8886.6.1.26.13.1
An entry in the rcCfmPMFLRCurrentTable.
Column Syntax OID
current period type ,15 minutes table or 24 hours table
Enumeration
Enumerated Values:
1rcCfmPMFLRCurrentPeriod15Minutes
2rcCfmPMFLRCurrentPeriod24Hours
.1.3.6.1.4.1.8886.6.1.26.13.1.1
seconds passed in current intervla period.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.13.1.2
far end frames transmited in current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.13.1.3
far end frames lost in current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.13.1.4
Far end frame loss ratio in current interval.
Unsigned32
Constraints:
range: 0-1000
.1.3.6.1.4.1.8886.6.1.26.13.1.5
Near end frames transmited in current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.13.1.6
Near end frames lost in current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.13.1.7
PDUs lost ratio from peer mep to local mep in current interval
Unsigned32
Constraints:
range: 0-1000
.1.3.6.1.4.1.8886.6.1.26.13.1.8

rcCfmPMFLRIntervalTable

table deprecated
.1.3.6.1.4.1.8886.6.1.26.14 · 1 row entry · 10 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmPMFLRIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmPMFLRIntervalTable'
CFM Performance monitor frame loss ratio interval Table
rcCfmPMFLRIntervalEntry row .1.3.6.1.4.1.8886.6.1.26.14.1
An entry in the rcCfmPMFLRIntervalTable.
Column Syntax OID
interval period type ,history 15 minutes table or 24 hours table
Enumeration
Enumerated Values:
1rcCfmPMFLRIntervalPeriod15Minutes
2rcCfmPMFLRIntervalPeriod24Hours
.1.3.6.1.4.1.8886.6.1.26.14.1.1
interval period index
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.14.1.2
peer remote mepid.
IEEE8021-CFM-MIBDot1agCfmMepId
Type Constraints:
range: 1..8191
.1.3.6.1.4.1.8886.6.1.26.14.1.3
begin time in this intervla period, unit second.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.14.1.4
far end frames transmited in this interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.14.1.5
far end frames lost in this interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.14.1.6
far end frame loss ratio in this interval.
Unsigned32
Constraints:
range: 0-1000
.1.3.6.1.4.1.8886.6.1.26.14.1.7
near end frames transmited in this interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.14.1.8
near end frames lost in this interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.14.1.9
near end frame loss ratio in this interval.
Unsigned32
Constraints:
range: 0-1000
.1.3.6.1.4.1.8886.6.1.26.14.1.10

rcCfmPMDelayCurrentTable

table deprecated
.1.3.6.1.4.1.8886.6.1.26.15 · 1 row entry · 16 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmPMDelayCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmPMDelayCurrentTable'
CFM Performance monitor delay current table
rcCfmPMDelayCurrentEntry row .1.3.6.1.4.1.8886.6.1.26.15.1
An entry in the rcCfmPMDelayCurrentTable.
Column Syntax OID
current period type ,15 minutes table or 24 hours table.
Enumeration
Enumerated Values:
1rcCfmPMDelayCurrentPeriod15Minutes
2rcCfmPMDelayCurrentPeriod24Hours
.1.3.6.1.4.1.8886.6.1.26.15.1.1
numbers of far end delay above object in current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.15.1.2
numbers of far end delay below object in current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.15.1.3
max far end delay in current interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.15.1.4
average far end delay in current interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.15.1.5
min far end delay in current interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.15.1.6
numbers of near end delay above object in current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.15.1.7
numbers of near end delay below object in current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.15.1.8
max near end delay in current interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.15.1.9
average near end delay in current interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.15.1.10
min near end delay in current interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.15.1.11
numbers of round trip delay above object in current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.15.1.12
numbers of round trip delay below object in current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.15.1.13
max round trip delay in current interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.15.1.14
averge round trip delay in current interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.15.1.15
min round trip delay in current interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.15.1.16

rcCfmPMDelayIntervalTable

table deprecated
.1.3.6.1.4.1.8886.6.1.26.16 · 1 row entry · 19 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmPMDelayIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmPMDelayIntervalTable'
CFM Performance monitor frame loss ratio current table
rcCfmPMDelayIntervalEntry row .1.3.6.1.4.1.8886.6.1.26.16.1
An entry in the rcCfmPMDelayIntervalTable.
Column Syntax OID
interval period type ,15 minutes table or 24 hours table
Enumeration
Enumerated Values:
1rcCfmPMDelayIntervalPeriod15Minutes
2rcCfmPMDelayIntervalPeriod24Hours
.1.3.6.1.4.1.8886.6.1.26.16.1.1
interval index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.16.1.2
begin time in this intervla period, unit second.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.16.1.3
peer remote mepid.
IEEE8021-CFM-MIBDot1agCfmMepId
Type Constraints:
range: 1..8191
.1.3.6.1.4.1.8886.6.1.26.16.1.4
numbers of far end delay above object in this interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.16.1.5
numbers of far end delay below object in this interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.16.1.6
max far end delay in this interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.16.1.7
average far end delay in this interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.16.1.8
min far end delay in this interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.16.1.9
numbers of near end delay above object in this interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.16.1.10
numbers of near end delay above object in this interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.16.1.11
max near end delay in this interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.16.1.12
average near end delay in this interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.16.1.13
min near end delay in this interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.16.1.14
numbers of round trip delay above object in this interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.16.1.15
numbers of round trip delay below object in this interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.16.1.16
max round trip delay in this interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.16.1.17
average round trip delay in this interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.16.1.18
min round trip delay in this interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.16.1.19

rcCfmPMDVCurrentTable

table deprecated
.1.3.6.1.4.1.8886.6.1.26.17 · 1 row entry · 13 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmPMDVCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmPMDVCurrentTable'
CFM Performance monitor delay variation current table
rcCfmPMDVCurrentEntry row .1.3.6.1.4.1.8886.6.1.26.17.1
An entry in the rcCfmPMFLRCurrentTable.
Column Syntax OID
current period type ,15 minutes table or 24 hours table
Enumeration
Enumerated Values:
1rcCfmPMDVCurrentPeriod15Minutes
2rcCfmPMDVCurrentPeriod24Hours
.1.3.6.1.4.1.8886.6.1.26.17.1.1
numbers of far end delay aviation above object in current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.17.1.2
numbers of far end delay aviation below object in current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.17.1.3
max far end delay variation in current interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.17.1.4
average far end delay variation in current interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.17.1.5
numbers of near end delay aviation above object in current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.17.1.6
numbers of near end delay aviation below object in current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.17.1.7
max far end delay variation in current interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.17.1.8
average far end delay variation in current interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.17.1.9
numbers of round trip delay aviation above object in current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.17.1.10
numbers of round trip delay aviation below object in current interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.17.1.11
max far end delay variation in current interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.17.1.12
average far end delay variation in current interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.17.1.13

rcCfmPMDVIntervalTable

table deprecated
.1.3.6.1.4.1.8886.6.1.26.18 · 1 row entry · 16 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmPMDVIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmPMDVIntervalTable'
CFM Performance monitor delay variation interval table
rcCfmPMDVIntervalEntry row .1.3.6.1.4.1.8886.6.1.26.18.1
An entry in the rcCfmPMDelayIntervalTable.
Column Syntax OID
interval period type ,15 minutes table or 24 hours table
Enumeration
Enumerated Values:
1rcCfmPMDVIntervalPeriod15Minutes
2rcCfmPMDVIntervalPeriod24Hours
.1.3.6.1.4.1.8886.6.1.26.18.1.1
interval period index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.18.1.2
begin time in this intervla period, unit second.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.18.1.3
peer remote mepid.
IEEE8021-CFM-MIBDot1agCfmMepId
Type Constraints:
range: 1..8191
.1.3.6.1.4.1.8886.6.1.26.18.1.4
numbers of far end delay variation above object in this interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.18.1.5
numbers of far end delay variation above object in this interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.18.1.6
max far end delay variation in this interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.18.1.7
average far end delay variation in this interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.18.1.8
numbers of near end delay variation above object in this interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.18.1.9
numbers of near end delay variation below object in this interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.18.1.10
max near end delay variation in this interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.18.1.11
average near end delay variation in this interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.18.1.12
numbers of round trip delay variation above object in this interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.18.1.13
numbers of round trip delay variation below object in this interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.18.1.14
max near end delay variation in this interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.18.1.15
average near end delay variation in this interval, unit ms
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.18.1.16

rcCfmPMThroughputTable

table deprecated
.1.3.6.1.4.1.8886.6.1.26.19 · 1 row entry · 10 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmPMThroughputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmPMThroughputTable'
ITU-T Y.1731 throughput(according to rfc2544) test statistics table.
rcCfmPMThroughputEntry row .1.3.6.1.4.1.8886.6.1.26.19.1
An entry in the rcCfmPMTable.
Column Syntax OID
result of rfc2544 throughput test.
Enumeration
Enumerated Values:
0successed
1unknownReasonFailed
2localReourceConflict
3remoteResourceConflict
4vsxTimeOut
.1.3.6.1.4.1.8886.6.1.26.19.1.1
state of rfc2544 throughput test.
Enumeration
Enumerated Values:
0idle
1farEndStart
2farEndSend
3farEndTest
4nearEndStart
5nearEndTest
6nearEndClose
.1.3.6.1.4.1.8886.6.1.26.19.1.2
far end rfc2544 throughput flow sended statistics, unit bps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.8886.6.1.26.19.1.3
far end rfc2544 throughput flow received statistics, unit bps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.8886.6.1.26.19.1.4
far end rfc2544 throughput flow sended statistics, unit pps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.8886.6.1.26.19.1.5
far end rfc2544 throughput flow received statistics, unit pps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.8886.6.1.26.19.1.6
near end rfc2544 throughput flow sended statistics, unit bps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.8886.6.1.26.19.1.7
near end rfc2544 throughput flow received statistics, unit bps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.8886.6.1.26.19.1.8
near end rfc2544 throughput flow sended statistics, unit pps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.8886.6.1.26.19.1.9
near end rfc2544 throughput flow received statistics, unit pps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.8886.6.1.26.19.1.10
.1.3.6.1.4.1.8886.6.1.26.20 · 1 row entry · 9 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmMaExTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmMaExTable'
CFM MA Extended Table
rcCfmMaExEntry row .1.3.6.1.4.1.8886.6.1.26.20.1
An entry in the rcCfmMaExTable.
Column Syntax OID
The type (and thereby format) of the Maintenance Association
Name.
IEEE8021-CFM-MIBDot1agCfmMaintAssocNameTyper/w
Type Values:
1primaryVid
2charString
3unsignedInt16
4rfc2865VpnId
32iccFormat
.1.3.6.1.4.1.8886.6.1.26.20.1.1
The Short Maintenance Association name. The type/format of
this object is determined by the value of the
dot1agCfmMaNetNameType object. This name must be unique within
a maintenance domain.
IEEE8021-CFM-MIBDot1agCfmMaintAssocNamer/w
Type Constraints:
range: 1..45
.1.3.6.1.4.1.8886.6.1.26.20.1.2
The mapping VLANs with which the Maintenance Association is
associated, or 0 if the MA is not attached to any VID.
OctetStringr/w
Constraints:
range: 512-512
.1.3.6.1.4.1.8886.6.1.26.20.1.3
Interval between CCM transmissions to be used by all MEPs
in the MA.
IEEE8021-CFM-MIBDot1agCfmCcmIntervalr/w
Type Values:
0intervalInvalid
1interval300Hz
2interval10ms
3interval100ms
4interval1s
5interval10s
6interval1min
7interval10min
.1.3.6.1.4.1.8886.6.1.26.20.1.4
costumer vlan in oam pdu. the value of 0 indicates oam Pdu transmited
without costumer vlan.
Q-BRIDGE-MIBVlanIdOrNoner/w
Type Constraints:
range: 0..4094
.1.3.6.1.4.1.8886.6.1.26.20.1.5
The pdu Priority. default priority is 6.
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.8886.6.1.26.20.1.6
The status of the row.

The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.8886.6.1.26.20.1.7
The PrimaryVlanId. default the minimum vlan in the vlanlist.
Q-BRIDGE-MIBVlanIdOrNoner/w
Type Constraints:
range: 0..4094
.1.3.6.1.4.1.8886.6.1.26.20.1.8
If set rcCfmMaExMipAutocreateAdmin _enabled (1), The MIP can be auto-created.
If set rcCfmMaExMipAutocreateAdmin _diabled (2), The MIP can be only manual-created.
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
.1.3.6.1.4.1.8886.6.1.26.20.1.9
.1.3.6.1.4.1.8886.6.1.26.21 · 1 row entry · 7 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmMaExAisTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmMaExAisTable'
Y.1731 MA Extended Ais Table
rcCfmMaExAisEntry row .1.3.6.1.4.1.8886.6.1.26.21.1
An entry in the rcCfmMaExAisTable.
Column Syntax OID
Set the enable or disable status of AIS in this MA,then send ais
packet when some errors occur.
SWITCH-TCEnableVarr/w
Type Values:
1enable
2disable
.1.3.6.1.4.1.8886.6.1.26.21.1.1
Set the level of AIS in this MA,then send ais packet when
some errors occur.
IEEE8021-CFM-MIBDot1agCfmMDLevelOrNoner/w
Type Constraints:
range: -1..7
.1.3.6.1.4.1.8886.6.1.26.21.1.2
The actually level of sending ais.
IEEE8021-CFM-MIBDot1agCfmMDLevelOrNone
Type Constraints:
range: -1..7
.1.3.6.1.4.1.8886.6.1.26.21.1.3
IWhen setting the period of sending AIS in this MA,it??s
periodically send ais when the timer arrived because of
some errors occur.
Enumerationr/w
Enumerated Values:
1aisPeriod1s
60aisPeriod60s
.1.3.6.1.4.1.8886.6.1.26.21.1.4
The storage time (s) when last receiving ais packet.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.21.1.6
The counters of sended ais packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.21.1.7
The counters of received ais packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.21.1.8
.1.3.6.1.4.1.8886.6.1.26.22 · 1 row entry · 6 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmMaExLckTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmMaExLckTable'
Y.1731 MA Extended LCK table
rcCfmMaExLckEntry row .1.3.6.1.4.1.8886.6.1.26.22.1
An entry in the rcCfmMaExLckTable.
Column Syntax OID
Set the level of AIS in this MA,then send ais
packet when some errors occur.
IEEE8021-CFM-MIBDot1agCfmMDLevelOrNoner/w
Type Constraints:
range: -1..7
.1.3.6.1.4.1.8886.6.1.26.22.1.1
The actually level of sending ais.
IEEE8021-CFM-MIBDot1agCfmMDLevelOrNone
Type Constraints:
range: -1..7
.1.3.6.1.4.1.8886.6.1.26.22.1.2
When setting the period of sending LCK in this MA,
it??s periodically send lck when the timer arrived
because of some errors occur.
Enumerationr/w
Enumerated Values:
1lckPeriod1s
60lckPeriod60s
.1.3.6.1.4.1.8886.6.1.26.22.1.3
The storage time (s) when last receiving lck packet.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.22.1.5
The counters of sended lck packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.22.1.6
The counters of received lck packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.22.1.7
.1.3.6.1.4.1.8886.6.1.26.24 · 1 row entry · 5 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmMulticastLbResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmMulticastLbResultTable'
CFM Multicast Loopback Result Table
rcCfmMulticastLbResultEntry row .1.3.6.1.4.1.8886.6.1.26.24.1
An entry in the rcCfmMulticastLbResultTable.
Column Syntax OID
The fourth index to the multicast loopback table.
Unsigned32
Constraints:
range: 1-256
.1.3.6.1.4.1.8886.6.1.26.24.1.1
The remote mep id.
Unsigned32
Constraints:
range: 0-8191
.1.3.6.1.4.1.8886.6.1.26.24.1.2
The lbr reveived port,0 means no lbr received.
Unsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.8886.6.1.26.24.1.3
The remote mep mac address,0000.0000.0000 means no remote mep mac.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.8886.6.1.26.24.1.4
lb rtt time,0 means rtt <1ms,5000 means timeout.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8886.6.1.26.24.1.5
.1.3.6.1.4.1.8886.6.1.26.25 · 1 row entry · 2 columns
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcCfmMipExTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-CFM-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-CFM-MIB::rcCfmMipExTable'
CFM mip extend Table
rcCfmMipExEntry row .1.3.6.1.4.1.8886.6.1.26.25.1
An entry in the rcCfmMipExTable.
Column Syntax OID
The ifIndex of the manual-created MIP
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.8886.6.1.26.25.1.1
The status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.8886.6.1.26.25.1.2