RAINBOW-SERVICES-MIB Table View

A Table of Default Service Templates that are used by the Device to provide Default Services. 
The table can hold up to two Default Service Templates. 
It can hold one Service Template of any Service Type (Layer II or PPPoE or VoIP). 
It can hold two Service Templates, but only the following combinations are allowed:
a. One PPPoE and one Layer II Service Templates.
b. One PPPoE and one VoIP Service Templates.

rbDfltServiceTemplateEntry row .1.3.6.1.4.1.12394.1.2.100.1.8.1

An entry in the Default Service Templates Table.
Includes parameters of the relevant Default Service Template.

Indexes

rbDfltServiceTemplateType

Column	Syntax	OID
rbDfltServiceTemplateType The name of the Service Template identified by the rbDflteServiceTemplateIdx. Read-only. It also serves as the index of the table.	RainbowServiceType Type Values: 1 rbLayerII 2 rbPPPoE 3 rbVoIP	.1.3.6.1.4.1.12394.1.2.100.1.8.1.1
rbDfltServiceTemplateIdx The index of the selected Service Template Entry in the Service Templates Table.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.1.8.1.2

A table of Service Templates (Profiles).

rbServiceTemplateConfigEntry row .1.3.6.1.4.1.12394.1.2.100.2.1.1

An entry in the Service Templates Table. Includes parameters of the relevant Service Template.

Indexes

rbServiceTemplateType rbServiceTemplateIdx

Column	Syntax	OID
rbServiceTemplateType The Service Type of the Service Template. The Service Template Type can be set only for a new Service Template (write-once). The Service Template Type of an existing Service Template cannot be changed (read-only).	RainbowServiceType Type Values: 1 rbLayerII 2 rbPPPoE 3 rbVoIP	.1.3.6.1.4.1.12394.1.2.100.2.1.1.1
rbServiceTemplateIdx The index of the relevant Service Template Entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.2.1.1.2
rbServiceTemplateName The Name of the Service Template - unique per Device.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.12394.1.2.100.2.1.1.3
rbServiceTemplateID The Service Template ID assigned by the Device (DB ID) - unique per Device.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.2.1.1.4
rbServiceTemplateBaseVLAN The VLAN tag (VPL ID) used in the backbone domain. A number in the range between 0 and 4094. A value of 4095 means No VPL ID. Not applicable if VLAN Transparency Mode is enabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12394.1.2.100.2.1.1.5
rbServiceTemplateBaseSignallingVLAN Not used!	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12394.1.2.100.2.1.1.6
rbServiceTemplateBaseDhcpVLAN Not used!	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12394.1.2.100.2.1.1.7
rbServiceTemplateForwardDhcpRequest Not used!	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.12394.1.2.100.2.1.1.8
rbServiceTemplateNumberOfSimultaneousCalls The maximum number of simultaneous VoIP calls (DRAP-based) that can be supported. Applicable only for Layer II and VoIP Services.	Integer32r/w Constraints: range: 0-50	.1.3.6.1.4.1.12394.1.2.100.2.1.1.9
rbServiceTemplatePolicyRuleIdx The index of the selected entry in the Policy Rules Table = selected Policy Rule. Not applicable for VoIP services!	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.2.1.1.10
rbServiceTemplatePolicyRuleName The Name of the selected Policy Rule. Not applicable for VoIP services!	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.12394.1.2.100.2.1.1.11
rbServiceTemplateForwardingRuleIdx The index of the selected entry in the row in Forwarding Rules Table = selected Forwarding Rule. Not applicable if VLAN Transparency Mode is enabled. The Service Type defined in the selected Forwarding Rule must match …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.2.1.1.12
rbServiceTemplateForwardingRuleName The name of the selected Forwarding Rule.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.12394.1.2.100.2.1.1.13
rbAServiceTemplateRowStatus Control for creating and deleting entries. Entries may be modified while active. active (1) - means that the entry is available for use by the managed device and relevant parameters may be modified; createAndGo (4) is…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12394.1.2.100.2.1.1.14
rbServiceTemplateQoSMarkingMode The method the device uses to mark the uplink traffic to the backbone. transparent (1): No Priority Marking. The system forwards the frames to the uplink network without any changes. rb8021p (2): All frames are marked…	Enumerationr/w Enumerated Values: 1 transparent 2 rb8021p 3 rbDSCP	.1.3.6.1.4.1.12394.1.2.100.2.1.1.15
rbServiceTemplateQoSMarkingValue Marking value used to mark frames forwarded to thebackbone. Applicable only if the selected QoS Marking Mode is either 802.1p (rp8021p) or DSCP (rbDSCP). For 802.1p Marking Mode the range is from 0 to 7. For DSCP Marki…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12394.1.2.100.2.1.1.16
rbServiceTemplateVLANTransparencyMode The VLAN Transparency Mode defines the method of transferring packets to the operator's upstream network. When set to enable, data packets sent from the Base Station to the backbone will be transferred transparently. …	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.12394.1.2.100.2.1.1.17
rbServiceTemplateClassdeprecated Service Template Class: Local definition or Global (Managed) definition using an XML File. In a Global Service Template all parameters become read-only.	Enumeration Enumerated Values: 1 local 2 global	.1.3.6.1.4.1.12394.1.2.100.2.1.1.18

A table of Services by SU MAC Address.

rbSuServiceConfigEntry row .1.3.6.1.4.1.12394.1.2.100.3.2.1

An entry in the Services Table. Includes parameters of the relevant Service.

Indexes

rbSuServiceMacAddress rbSuServiceIdx

Column	Syntax	OID
rbSuServiceMacAddress The MAC Address of the SU associated with the Service.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.12394.1.2.100.3.2.1.1
rbSuServiceIdx The index of the relevant Service Entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.3.2.1.2
rbSuServiceRbType The Service Type is determined by the Service Template type (read-only).	RainbowServiceType Type Values: 1 rbLayerII 2 rbPPPoE 3 rbVoIP	.1.3.6.1.4.1.12394.1.2.100.3.2.1.3
rbSuServiceName Service Name - unique per subscriber (for Permanent SUs). The same Service Name may be assigned to any number of Subscribers.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.12394.1.2.100.3.2.1.4
rbSuServiceID The Service ID assigned by the Device (DB ID) - unique per Device.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.3.2.1.5
rbSuSubscriberIdx The index of the selected entry in the Subscribers Table. Not applicable for a Temporary SU.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.3.2.1.6
rbSuServiceTemplateIdx The index of the selected entry in the Service Templates Table = selected Service Template. When updating an existing Service, the Service Type defined in the selected Service Template must match the one already define…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.3.2.1.7
rbSuServiceTemplateName The name of the selected Service Template.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.12394.1.2.100.3.2.1.8
rbSuServiceTemplateID The ID of the selected Service Template.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.3.2.1.9
rbSuServiceSwitchingGroupIdx Not used in current version.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.3.2.1.10
rbSuServiceAdminStatus Service Admin status. If the Admin Status is disabled, the Service will not be available to the Subscriber.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.12394.1.2.100.3.2.1.11
rbSuServiceOperStatus Service Operational Status.	Enumeration Enumerated Values: 1 up 2 down 3 unknown	.1.3.6.1.4.1.12394.1.2.100.3.2.1.12
rbSuServiceClientSiteVLANList A list of up to 16 (15 if Hybrid VLAN Mode is enabled) VLAN IDs at the Subscribers site that are used as classifiers for the Service. An empty list means No VLAN IDs. To prepare the list: Arrange all VLAN IDs in ascen…	OctetStringr/w Constraints: range: 0-24	.1.3.6.1.4.1.12394.1.2.100.3.2.1.13
rbSuServiceClientSiteVLANListCount Number of non-null VLAN IDs in the rbServiceClientSiteVLANList.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12394.1.2.100.3.2.1.14
rbSuServiceAUSlotNumber The slot number of the AU serving the applicable SU. This parameter is not applicable if the SU is served by a Micro Base Station.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12394.1.2.100.3.2.1.15
rbSuServiceVLANHybridMode Hybrid VLAN Mode of operation enables classification of both tagged and untagged packets or untagged packets only, according to the following rules: - Hybrid VLAN Mode disabled and Client Site VLAN List is not empty: On…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.12394.1.2.100.3.2.1.16
rbSuServiceVLANClassificationMode VLAN Classification Mode. The VLAN Classification feature enables using VLAN ID for classification of transparent service downlink traffic before transmission to the destination MAC address. The VLAN Classification feat…	Enumerationr/w Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.12394.1.2.100.3.2.1.17
rbSuServiceAccessVLAN The Access VLAN parameter enables defining a VLAN ID to be used with untagged packets received on the Ethernet port of the SU. This parameter is applicable only for a transparent service (VLAN Transparency Mode is On) w…	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.12394.1.2.100.3.2.1.18
rbSuServiceRowStatus Control for creating and deleting entries. Entries may be modified while active. active (1) - means that the entry is available for use by the managed device and relevant parameters may be modified; createAndGo (4) is…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12394.1.2.100.3.2.1.19

A table of SUs MacAddress registered in the system.

rbSuMappingEntry row .1.3.6.1.4.1.12394.1.2.100.3.3.1

An entry in the Mapping Table.

Indexes

rbSuMappingSysName

Column	Syntax	OID
rbSuMappingSysName The SU's name (User Name in SUs operating in Advanced Si mode). For the table having string as index the corresponding SNMP object key must have as the count of components the following: - 1st ULONG is destined for leng…	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.12394.1.2.100.3.3.1.1
rbSuMappingMacAddress The MAC address of the SU associated with the SU's name (User Name).	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.12394.1.2.100.3.3.1.2

A table of QoS Profiles.

rbQoSProfileConfigEntry row .1.3.6.1.4.1.12394.1.2.100.4.1.1

An entry in the QoS Profiles Table. Includes parameters of the relevant QoS Profile.

Indexes

rbQoSProfileIdx

Column	Syntax	OID
rbQoSProfileIdx The index of the relevant QoS Profile Entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.4.1.1.1
rbQoSProfileName QoS Profile Name - unique per Device.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.12394.1.2.100.4.1.1.2
rbQoSProfileID The QoS Profile ID assigned by the Device - unique per Device.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.4.1.1.3
rbQoSProfileType The QoS Profile Type: CG - (Continuing Grant) service is tailored for carrying constant bit-rate (CBR) real-time services characterized by fixed size data packets on a periodic basis such as VoIP or E1/T1. RT (Real-Time…	Enumerationr/w Enumerated Values: 0 rbCG 1 rbRT 2 rbNRT 3 rbBE	.1.3.6.1.4.1.12394.1.2.100.4.1.1.4
rbQoSProfileParam1 For QOS Profile type RT-VR or NRT-VR, this parameter is CIR (1-12000 in Kbps). For QoS Profile type CG this parameter is the Packet Size (64-1550 in bytes including 4 bytes CRC and 4 bytes VLAN tag). For QoS Profile ty…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.4.1.1.5
rbQoSProfileParam2 For QOS Profile type BE or NRT-VR, this parameter is MIR (1-12000 in Kbps). For QoS Profile type CG this parameter is the Sample Interval (5-100 in milliseconds in steps of 5). For QoS Profile type RT-VR this parameter…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.4.1.1.6
rbQoSProfileParamTime The CT (Committed Time) parameter defines the time window over which the information rate is averaged to ensure compliance with the CIR or MIR parameter. This parameter is not applicable for QoS Profile Type CG.	Enumerationr/w Enumerated Values: 1 short 2 medium 3 long	.1.3.6.1.4.1.12394.1.2.100.4.1.1.7
rbAQoSProfileRowStatus Control for creating and deleting entries. Entries may be modified while active. active (1) - means that the entry is available for use by the managed device and relevant parameters may be modified; createAndGo (4) is…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12394.1.2.100.4.1.1.8
rbQoSProfileClass QoS Profile Class: Local definition or Global (Managed) definition using an XML File. In a Global QoS Profile all parameters become read-only.	Enumeration Enumerated Values: 1 local 2 global	.1.3.6.1.4.1.12394.1.2.100.4.1.1.9

A Table of Policy rules.

rbPolicyRuleConfigEntry row .1.3.6.1.4.1.12394.1.2.100.5.1.1

An entry in the Policy Rules Table. Includes parameters of the relevant Policy Rule.

Indexes

rbPolicyRuleIdx

Column	Syntax	OID
rbPolicyRuleIdx The index of the relevant Policy Rule Entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.1
rbPolicyRuleName Policy Rule Name - unique per Device	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.12394.1.2.100.5.1.1.2
rbPolicyRuleID The Policy Rule ID assigned by the Device (DB ID) - unique per Device.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.3
rbPolicyRulePriorityType The prioritization mechanism used by the Policy Rule: DSCP or 802.1p.	Enumerationr/w Enumerated Values: 1 rbDSCP 2 rb8021p	.1.3.6.1.4.1.12394.1.2.100.5.1.1.4
rbPolicyRuleUpQoSProfileIdx1 The index in the QoS Profiles Table of the QoS Profile selected for Uplink Range 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.6
rbPolicyRuleUpQoSUpperLimit1 The upper limit for Uplink Range 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.7
rbPolicyRuleUpQoSProfileIdx2 The index in the QoS Profiles Table of the QoS Profile selected for Uplink Range 2.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.9
rbPolicyRuleUpQoSUpperLimit2 The upper limit for Uplink Range 2.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.10
rbPolicyRuleUpQoSProfileIdx3 The index in the QoS Profiles Table of the QoS Profile selected for Uplink Range 3.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.12
rbPolicyRuleUpQoSUpperLimit3 The upper limit for Uplink Range 3.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.13
rbPolicyRuleUpQoSProfileIdx4 The index in the QoS Profiles Table of the QoS Profile selected for Uplink Range 4.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.15
rbPolicyRuleUpQoSUpperLimit4 The upper limit for Uplink Range 4.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.16
rbPolicyRuleDownQoSProfileIdx1 The index in the QoS Profiles Table of the QoS Profile selected for Downlink Range 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.18
rbPolicyRuleDownQoSUpperLimit1 The upper limit for Downlink Range 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.19
rbPolicyRuleDownQoSProfileIdx2 The index in the QoS Profiles Table of the QoS Profile selected for Downlink Range 2.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.21
rbPolicyRuleDownQoSUpperLimit2 The upper limit for Downlink Range 2.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.22
rbPolicyRuleDownQoSProfileIdx3 The index in the QoS Profiles Table of the QoS Profile selected for Downlink Range 3.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.24
rbPolicyRuleDownQoSUpperLimit3 The upper limit for Downlink Range 3.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.25
rbPolicyRuleDownQoSProfileIdx4 The index in the QoS Profiles Table of the QoS Profile selected for Downlink Range 4.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.27
rbPolicyRuleDownQoSUpperLimit4 The upper limit for Downlink Range 4.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.5.1.1.28
rbAPolicyRuleRowStatus Control for creating and deleting entries. Entries may be modified while active. active (1) - means that the entry is available for use by the managed device and relevant parameters may be modified; createAndGo (4) is…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12394.1.2.100.5.1.1.29
rbPolicyRuleClass Policy Rule Class: Local definition or Global (Managed) definition using an XML File. In a Global Policy Rule all parameters become read-only.	Enumeration Enumerated Values: 1 local 2 global	.1.3.6.1.4.1.12394.1.2.100.5.1.1.30

A table of Forwarding Rules.

rbForwardingRuleConfigEntry row .1.3.6.1.4.1.12394.1.2.100.6.2.1

An entry in the Forwarding Rules Table. Includes parameters of the relevant Forwarding Rule.

Indexes

rbForwardingRuleType rbForwardingRuleIdx

Column	Syntax	OID
rbForwardingRuleType The Service Type of the Forwarding Rule. The Service Type can be set only for a new Forwarding Rule (write-once). The Service Template Type of an existing Forwarding Rule cannot be changed (read-only).	RainbowServiceType Type Values: 1 rbLayerII 2 rbPPPoE 3 rbVoIP	.1.3.6.1.4.1.12394.1.2.100.6.2.1.1
rbForwardingRuleIdx The index of the relevant Forwarding Rule Entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.6.2.1.2
rbForwardingRuleName Forwarding Rule name - unique per Device.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.12394.1.2.100.6.2.1.3
rbForwardingRuleID The Forwarding Rule ID assigned by the Device (DB ID) - unique per Device.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.6.2.1.4
rbForwardingRuleUnicastRelaying Applicable only to Layer II and VoIP Service Types (not applicable to PPPoE Service Type). Unicast Relaying enable/disable. When the Unicast Relaying parameter is enabled, unicast packets originating from devices on th…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.12394.1.2.100.6.2.1.6
rbForwardingRuleMulticastRelaying Applicable only to Layer II and VoIP Service Types (not applicable to PPPoE Service Type). Multicast Relaying enable/disable. When the Broadcast Relaying parameter is enabled, broadcast packets originating from devices…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.12394.1.2.100.6.2.1.7
rbForwardingUnknownAddrPolicy Applicable only to Layer II and VoIP Service Types (not applicable to PPPoE Service Type). Unknown Address Forwarding Policy: Reject: The AU/Micro Base Station will transmit packets only to those addresses that the AU…	Enumerationr/w Enumerated Values: 1 reject 2 forward	.1.3.6.1.4.1.12394.1.2.100.6.2.1.8
rbForwardingRuleMulticastVLAN Applicable only to support services to an SU with SW version below 2.0. The VLAN ID to be attached to mulicast messages in the downlink in order to enable full support of the VLAN feature. A number in the range betwee…	Integer32r/w Constraints: range: 0-4096	.1.3.6.1.4.1.12394.1.2.100.6.2.1.9
rbForwardingRuleMulticastQoSIdx The index in the QoS Profiles Table of the QoS Profile to be used for broadcasts and multicasts in the downlink.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.6.2.1.10
rbAForwardingRuleRowStatus Control for creating and deleting entries. Entries may be modified while active. active (1) - means that the entry is available for use by the managed device and relevant parameters may be modified; createAndGo (4) is…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12394.1.2.100.6.2.1.11
rbForwardingRuleClass Forwarding Rule Class: Local definition or Global (Managed) definition using an XML File. In a Global Forwarding Rule all parameters become read-only.	Enumeration Enumerated Values: 1 local 2 global	.1.3.6.1.4.1.12394.1.2.100.6.2.1.12

A table of Subscribers

rbSubscriberEntry row .1.3.6.1.4.1.12394.1.2.100.7.1.1

An entry in the Subscribers Table. Includes parameters of the relevant Subscriber.

Indexes

rbSubscriberIdx

Column	Syntax	OID
rbSubscriberIdx The index of the relevant Subscriber Entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.7.1.1.1
rbSubscriberID The Name of the relevant Subscriber. Must be unique in the device.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.12394.1.2.100.7.1.1.2
rbSubscriberFirstName Subscriber's First Name. An optional parameter for information purposes.	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.12394.1.2.100.7.1.1.3
rbSubscriberLastName Subscriber's Last Name. An optional parameter for information purposes.	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.12394.1.2.100.7.1.1.4
rbSubscriberAdminStatus Subscriber's Admin Status. If the Admin status is disabled, the Subscriber will not get Services.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.12394.1.2.100.7.1.1.5
rbSubscriberInfo Subscriber's additional info. An optional parameter for information purposes.	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.12394.1.2.100.7.1.1.6
rbASubscriberRowStatus Control for creating and deleting entries. Entries may be modified while active. active (1) - means that the entry is available for use by the managed device and relevant parameters may be modified; createAndGo (4) is…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12394.1.2.100.7.1.1.7

A Table of rules for L2 filters.

rbL2FilteringRuleEntry row .1.3.6.1.4.1.12394.1.2.100.8.1.1.1

An entry in the L2 Filtering Rules Table. Includes parameters of the relevant L2 Rule.

Indexes

rbL2FilteringRuleIdx

Column	Syntax	OID
rbL2FilteringRuleIdx The index of the L2 Filtering Rule Entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.8.1.1.1.1
rbL2FilteringRuleRowStatus Used to manage the creation and deletion of table rows (update is not available). createAndGo (4) is used for creating a new entry and to have its status automatically set to active; destroy (6) is used for deleting an…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12394.1.2.100.8.1.1.1.2
rbL2FilteringRuleName L2 Filtering Rule name - unique per Device.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.12394.1.2.100.8.1.1.1.3
rbL2FilteringRuleSrcMacAddress L2 Filtering Rule Source MAC Address. 00-00-00-00-00-00 means ANY MAC address. If the Source MAC Address is specified, then the Destination MAC Address must be ANY, and vice versa. Both Source and Destination MAC Addre…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.12394.1.2.100.8.1.1.1.4
rbL2FilteringRuleSrcMask L2 Filtering Rule Source MAC Address Mask. FF-FF-FF-FF-FF-FF means NO Mask. If the Source MAC Address is ANY, the Mask is not applicable. For the Micro Base Station the Mask is not applicable.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.12394.1.2.100.8.1.1.1.5
rbL2FilteringRuleDestMacAddress L2 Filtering Rule Destination MAC Address. 00-00-00-00-00-00 means ANY MAC address. If the Source MAC Address is specified, then the Destination MAC Address must be ANY, and vice versa. Both Source and Destination MAC …	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.12394.1.2.100.8.1.1.1.6
rbL2FilteringRuleDestMask L2 Filtering Rule Destination MAC Address Mask. FF-FF-FF-FF-FF-FF means NO Mask. If the Source MAC Address is ANY, the Mask is not applicable. For the Micro Base Station the Mask is not applicable.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.12394.1.2.100.8.1.1.1.7
rbL2FilteringRuleEthType The L2 Filtering Rule Ethernet type. The range is from 0 to 65535. 0 means ANY Ethertype.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.12394.1.2.100.8.1.1.1.8

A Table of rules for L3/L4 filters.

rbL34FilteringRuleEntry row .1.3.6.1.4.1.12394.1.2.100.8.2.1.1

An entry in the L3/L4 Filtering Rules Table. Includes parameters of the relevant L3/L4 Rule.

Indexes

rbL34FilteringRuleIdx

Column	Syntax	OID
rbL34FilteringRuleIdx The index of the L3/L4 Filtering Rule Entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.8.2.1.1.1
rbL34FilteringRuleRowStatus Used to manage the creation and deletion of table rows (update is not available). createAndGo (4) is used for creating a new entry and to have its status automatically set to active; destroy (6) is used for deleting an…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12394.1.2.100.8.2.1.1.2
rbL34FilteringRuleName L3/L4 Filtering Rule name - unique per Device.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.12394.1.2.100.8.2.1.1.3
rbL34FilteringRuleSrcIpAddress L3/L4 Filtering Rule Source IP Address. 254.255.255.255 means ANY IP address. If the Source IP Address is specified, then the Destination IP Address must be ANY, and vice versa. Both Source and Destination IP Addresses…	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.12394.1.2.100.8.2.1.1.4
rbL34FilteringRuleSrcMask L3/L4 Filtering Rule Source Mask. 255.255.255.255 means NO Mask. If the Source IP Address is ANY, the Mask is not applicable. For the Micro Base Station the Mask is not applicable.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.12394.1.2.100.8.2.1.1.5
rbL34FilteringRuleDestIpAddress L3/L4 Filtering Rule Destination IP Address. 254.255.255.255 means ANY IP address. If the Source IP Address is specified, then the Destination IP Address must be ANY, and vice versa. Both Source and Destination IP Addr…	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.12394.1.2.100.8.2.1.1.6
rbL34FilteringRuleDestMask L3/L4 Filtering Rule Destination Mask. 255.255.255.255 means NO Mask. If the Source IP Address is ANY, the Mask is not applicable. For the Micro Base Station the Mask is not applicable.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.12394.1.2.100.8.2.1.1.7
rbL34FilteringRuleIpProtocol L3/L4 Filtering Rule Defined IP Protocol. The range is from 0 to 255. 255 means ANY protocol.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.12394.1.2.100.8.2.1.1.8
rbL34FilteringRuleSrcUdpTcpPort L3, L4 Filtering Rule Source UDP/TCP Port. 65535 means ANY Port. Each L3/L4 Filtering Rule must include either a Source or a Destination Port. If the Source Port is specified, then the Destination Port must be ANY, an…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.12394.1.2.100.8.2.1.1.9
rbL34FilteringRuleDestUdpTcpPort L3, L4 Filtering Rule Destination UDP/TCP Port. 65535 means ANY Port. Each L3/L4 Filtering Rule must include either a Source or a Destination Port. If the Source Port is specified, then the Destination Port must be ANY…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.12394.1.2.100.8.2.1.1.10

A Table of Filtering parameters per Interface. This is a static table with two entries.

rbInterfaceFilteringEntry row .1.3.6.1.4.1.12394.1.2.100.8.3.1.1

An entry in the Interface Filtering Table. Includes Filtering parameters of the relevant Interface.

Indexes

rbInterfaceFilteringType rbInterfaceFilteringIdx

Column	Syntax	OID
rbInterfaceFilteringType Interface Filtering Type.	Enumeration Enumerated Values: 1 fromWireless 2 fromNetwork	.1.3.6.1.4.1.12394.1.2.100.8.3.1.1.1
rbInterfaceFilteringIdx The index of the Entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.8.3.1.1.2
rbInterfaceFilteringName Interface Filtering name - unique per Device. Read-only in the current version. The read-only names are From Wireless (Idx 1) and From Network (Idx 2).	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.12394.1.2.100.8.3.1.1.3
rbInterfaceFilteringAdminStatus Interface Filtering Admin Status.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.12394.1.2.100.8.3.1.1.4
rbInterfaceFilteringActiveFilterType Interface Filtering Active Filter Type.	Enumerationr/w Enumerated Values: 1 filterL2 2 filterL34	.1.3.6.1.4.1.12394.1.2.100.8.3.1.1.5
rbInterfaceFilteringAction Interface Filtering Action.	Enumerationr/w Enumerated Values: 1 deny 2 allow	.1.3.6.1.4.1.12394.1.2.100.8.3.1.1.6
rbInterfaceFilteringDeleteAllFilteringRules Used to delete all Filtering Rules defined for the Interface Filtering. Filtering Rules per Interface are defined using the Filters Table.	Enumerationr/w Enumerated Values: 0 doNothing 1 deleteAllRules	.1.3.6.1.4.1.12394.1.2.100.8.3.1.1.7
rbInterfaceFilteringResetAllFilteringCounters Used to reset all Filtering Counters of the Interface Filtering, including the Non Matching Packets Counters.	Enumerationr/w Enumerated Values: 0 doNothing 1 resetCounters	.1.3.6.1.4.1.12394.1.2.100.8.3.1.1.8
rbInterfaceFilteringNonMatchingPacketsCounter A counter for the Non Matching Packets (per interface).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.8.3.1.1.9

A Table of filters.

rbFilterEntry row .1.3.6.1.4.1.12394.1.2.100.8.4.1.1

An entry in the Filter Table.

Indexes

rbInterfaceFilteringIdx rbFilterRuleType rbFilterRuleIndex

Column	Syntax	OID
rbFilterRuleType The Type of the relevant Filtering Rule.	Enumerationr/w Enumerated Values: 1 filterL2 2 filterL34	.1.3.6.1.4.1.12394.1.2.100.8.4.1.1.1
rbFilterRuleIndex The index of the Filtering Rule in the relevant Filtering Rules Table. Serves also as an index of the entry.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.8.4.1.1.2
rbFilterRowStatus Used to manage the creation and deletion of table rows (update is not available). createAndGo (4) is used for creating a new entry and to have its status automatically set to active; destroy (6) is used for deleting an…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12394.1.2.100.8.4.1.1.3

A Table of Filtering Counters. Counters are available per Interface Filtering and Filtering Rule.

rbFilteringCounterEntry row .1.3.6.1.4.1.12394.1.2.100.8.5.1.1

An entry in the Filtering Counter Table. Includes parameters of the relevant Filtering Rule.

Indexes

rbInterfaceFilteringIdx rbInterfaceFilteringActiveFilterType rbCountRuleIdx

Column	Syntax	OID
rbCountRuleIdx The index of the Filtering Rule in the relevant Filtering Rules Table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.8.5.1.1.1
rbResetCounter Used to reset the Interface Filtering Rule Counter.	Enumerationr/w Enumerated Values: 0 doNothing 1 resetCounter	.1.3.6.1.4.1.12394.1.2.100.8.5.1.1.2
rbRuleMatchCount The number of packets that matched the Filtering Rule.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12394.1.2.100.8.5.1.1.3

MAC Address Deny List Table.

rbMACAddressDenyListEntry row .1.3.6.1.4.1.12394.1.2.100.8.6.2.1

An entry in the MAC Address Deny List Table. Packets whose source or destination is included in the MAC Address Deny List will be rejected.

Indexes

rbMACAddressDenyMacAddress

Column	Syntax	OID
rbMACAddressDenyMacAddress The MAC Address of the entry in the MAC Address Deny List Table.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.12394.1.2.100.8.6.2.1.1
rbMACAddressDenyListRowStatus Control for creating and deleting entries. Entries may be modified while active. active (1) - means that the entry is available for use by the managed device and relevant parameters may be modified; createAndGo (4) is…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12394.1.2.100.8.6.2.1.2

A table of XML Error Reports.

rbXmlErrorReportEntry row .1.3.6.1.4.1.12394.1.2.100.10.1.1

An entry in the XML Error Table. Includes Errors that encountered while parsing an XML file.

Indexes

rbXmlErrorIdx

Column	Syntax	OID
rbXmlErrorIdx The index of the relevant Entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12394.1.2.100.10.1.1.1
rbXmlFolderType The type of the folder reported by the row.	Enumeration Enumerated Values: 0 undefined 1 serviceProfiles	.1.3.6.1.4.1.12394.1.2.100.10.1.1.2
rbXmlElementType The type of the element reported by the row.	Enumeration Enumerated Values: 0 undefined 1 qosProfile 2 forwardingRule 3 priorityClassifier 4 serviceProfile	.1.3.6.1.4.1.12394.1.2.100.10.1.1.3
rbXmlErrorType The type of the error encountered while parsing the XML file.	Enumeration Enumerated Values: 0 noError 1 illegalTableId 2 deleteSuFailure 3 oneL2fwrulePerVpl 4 sameServiceTypeOnVlan 5 dbAddFailure 6 dbUpdateFailure 7 dbDeleteFailure 8 keyMissing 9 addedRecordAlreadyExists 10 addSmRecNeeded 11 addSuRecNeeded 12 addPipeRecNeeded 13 addPriorityClassRecNeeded 14 addFwRulesRecNeeded 15 addIpAddrsRulesRecNeeded 16 addProfileRecNeeded 17 addSubscriberRecNeeded 18 addVlanListNeeded 19 addQosRecNeeded 20 updatedRecordNotExists 21 deletedRecordNotExists 22 deletePipeRecNeeded 23 deleteProfileRecNeeded 24 deleteFwRulesRecNeeded 25 deletePriorityRecNeeded 26 deleteDefaultProfileNeeded 27 deletePriorityDefDscpRecNeeded 28 wrongPriorityType 29 wrongUpPriorityRanges 30 wrongDnPriorityRanges 31 addTooManyConnections 32 serviceHandling 33 illeagalTranstype 34 illeagalSustatus 35 addedKeyAlreadyExists 36 fileDoesNotExist 37 tableIsFull 38 deleteSuServicesNeeded 39 differentServiceType 40 differentForwardingType 41 differentForwardSrvcType 42 tooManyVlans 43 updateSuStatus 44 changeSu 45 vlanMismatch 46 wrongVlanId 47 wrongCgQosValues 48 maxVlanPerSuExcedded 49 duplicateRecordName 50 deleteTransparentFwRule 51 transparentVlanVplMismatch 52 transparentFwProfileMismatch 53 missingTransparentFwRule 54 globalProfile 55 wrongCirValue 56 wrongMirValue 57 invalidMaxCallsValue 58 invalidSampleRate 59 invalidPacketSize 60 invalidFwRuleParameter 61 nullProfileName 62 invalidQosType 63 invalidPriorityClassifierType 64 invalidCT 65 invalidTransparencyMode 66 oneVlanPermittedForVlanClassMode 67 accessVlanMismatch 68 accessVlanDuplicate 69 oneAccessVlanPerSU 70 changTransparentFWRuleName 1000 unknownError 1001 xmlParseFormatErr 1002 xmlParseSyntaxErr 1003 xmlParseUnresolvedProfileErr	.1.3.6.1.4.1.12394.1.2.100.10.1.1.4
rbXmlFileLineNumber The line number in the XML file where the error was encountered.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12394.1.2.100.10.1.1.5