RADLAN-vlan-MIB Table View

This table translates Vlan name to Vlan's tag and ifindex

vlanNameEntry row .1.3.6.1.4.1.89.48.21.1

The row definition for this table.

Indexes

vlanNameName

Column	Syntax	OID
vlanNameName The Vlan's name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.48.21.1.1
vlanNameTag The Vlan's tag	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.48.21.1.2
vlanNameIfIndex The Vlan's ifindex	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.48.21.1.3

This table hold information on port status trunk or access

vlanPortModeEntry row .1.3.6.1.4.1.89.48.22.1

The row definition for this table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
vlanPortModeState The port state, 1 is generic cli	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.48.22.1.1

special vlan tag used for this port

vlanSpecialTagEntry row .1.3.6.1.4.1.89.48.33.1

entry of special tag

Indexes

IF-MIBifIndex

Column	Syntax	OID
vlanSpecialTagVID specify the special vlan tag .	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.89.48.33.1.1
vlanSpecialTagStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.33.1.2

special Current vlan tag used for this port

vlanSpecialTagCurrentEntry row .1.3.6.1.4.1.89.48.34.1

entry of Current special tag

Indexes

IF-MIBifIndex

Column	Syntax	OID
vlanSpecialTagCurrentVID specify the special vlan tag .	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.48.34.1.1
vlanSpecialTagCurrentReserved specify if the special vlan tag is reserved .	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.48.34.1.2
vlanSpecialTagCurrentActive specify if the special vlan tag is used .	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.48.34.1.3

table for pve port and uplink

vlanPrivateEdgeEntry row .1.3.6.1.4.1.89.48.37.1

entry of pve

Indexes

IF-MIBifIndex

Column	Syntax	OID
vlanPrivateEdgeUplink specify the uplink port.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.89.48.37.1.1
vlanPrivateEdgeStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.37.1.2

table for DynamicVlan

vlanDynamicVlanEntry row .1.3.6.1.4.1.89.48.39.1

entry of DynamicVlan

Indexes

vlanDynamicVlanMacAddress

Column	Syntax	OID
vlanDynamicVlanMacAddress mac address	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.89.48.39.1.1
vlanDynamicVlanTag vlan Tag	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.89.48.39.1.2
vlanDynamicVlanStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.39.1.3

This table hold information on port status trunk or access

vlanPortModeExtEntry row .1.3.6.1.4.1.89.48.40.1

The row definition for this table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
vlanPortModeExtState The ext	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.48.40.1.1
vlanPortModeExtStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.40.1.2

table for PrivateVlan

vlanPrivateEntryOld row .1.3.6.1.4.1.89.48.42.1

entry of PrivateVlan

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
vlanPrivateOldIsolatedVlanTag vlan Tag	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.89.48.42.1.1
vlanPrivateOldStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.42.1.2

table for PrivateVlan

vlanPrivateCommunityEntry row .1.3.6.1.4.1.89.48.43.1

entry of PrivateVlan

Indexes

Q-BRIDGE-MIBdot1qVlanIndex vlanPrivateCommunityVlanTag

Column	Syntax	OID
vlanPrivateCommunityVlanTag vlan Tag	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.48.43.1.1
vlanPrivateCommunityStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.43.1.2

multicast vlan used for this port

vlanMulticastTvEntry row .1.3.6.1.4.1.89.48.44.1

entry of multicast tag

Indexes

IF-MIBifIndex

Column	Syntax	OID
vlanMulticastTvVID specify the TV vlan tag, vlan must exist .	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.89.48.44.1.1
vlanMulticastTvStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.44.1.2

A table that contains mappings from Range of MAC
addresses to Group Identifiers used for
MAC-based VLAN Classification.

vlanMacBaseVlanGroupEntry row .1.3.6.1.4.1.89.48.45.1

A mapping from a Range of MAC addresses to a
Group Identifier.

Indexes

vlanMacBaseVlanMacAddress vlanMacBaseVlanMacMask

Column	Syntax	OID
vlanMacBaseVlanMacAddress The base MAC address of the range.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.89.48.45.1.1
vlanMacBaseVlanMacMask The Mask of the range. The mask determains the leading '1' bits of the mask (MSB). 48 means single HOST and 9 means the widest range. The MASK is limited to 9 to avoid entring ranges including multicast addresses.	Integer32 Constraints: range: 9-48	.1.3.6.1.4.1.89.48.45.1.2
vlanMacBaseVlanGroupId Represents a group of ranges of MAC addresses that are associated together when assigning a VID to a frame.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.48.45.1.3
vlanMacBaseVlanGroupRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.45.1.4

A table that contains VID sets used for
MAC-based VLAN Classification.

vlanMacBaseVlanPortEntry row .1.3.6.1.4.1.89.48.46.1

A VID set for a port and group.

Indexes

BRIDGE-MIBdot1dBasePort vlanMacBaseVlanPortGroupId

Column	Syntax	OID
vlanMacBaseVlanPortGroupId Designates a group of Ranges in the ranges Group Database.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.89.48.46.1.1
vlanMacBaseVlanPortGroupVid The VID associated with a group of range MAC addresses for each port.	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.89.48.46.1.2
vlanMacBaseVlanPortRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.46.1.3

table for pve port and uplink

vlanPrivateEdgeGroupEntry row .1.3.6.1.4.1.89.48.47.1

entry of pve

Indexes

vlanPrivateEdgeGroupSource

Column	Syntax	OID
vlanPrivateEdgeGroupSource specify the uplink group.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.89.48.47.1.1
vlanPrivateEdgeGroupUplink specify the uplink port.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.89.48.47.1.2
vlanPrivateEdgeGroupStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.47.1.3

table for pve port and uplink

vlanPrivateEdgeGroupIfIndexEntry row .1.3.6.1.4.1.89.48.48.1

entry of pve

Indexes

IF-MIBifIndex

Column	Syntax	OID
vlanPrivateEdgeGroupIfIndexID specify the ifIndex group id.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.89.48.48.1.1
vlanPrivateEdgeGroupIfIndexDomainID specify the ifIndex group id.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.89.48.48.1.2

A table that contains mappings from subnet
range to Group Identifiers used for
Port-and-subnet-based VLAN Classification.

vlanSubnetRangeEntry row .1.3.6.1.4.1.89.48.49.1

A mapping from a subnet to a
Group Identifier.

Indexes

vlanSubnetRangeAddr vlanSubnetRangeMask

Column	Syntax	OID
vlanSubnetRangeAddr The IP address of the range	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.89.48.49.1.1
vlanSubnetRangeMask The numbers of continuous ones in the mask	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.89.48.49.1.2
vlanSubnetRangeGroupId Represents a group of subnets that are associated together when assigning a VID to a frame.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.48.49.1.3
vlanSubnetRangeRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.49.1.4

A table that contains VID sets used for
Port-and-subnet-based VLAN Classification.

vlanSubnetPortEntry row .1.3.6.1.4.1.89.48.50.1

A VID set for a port.

Indexes

BRIDGE-MIBdot1dBasePort vlanSubnetPortGroupId

Column	Syntax	OID
vlanSubnetPortGroupId Designates a group of subnets in the Group Database.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.89.48.50.1.1
vlanSubnetPortGroupVid The VID associated with a group of subnets for each port.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.89.48.50.1.2
vlanSubnetPortRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.50.1.3

TriplePlay table, map CPE vlan to multicastTvVlan

vlanTriplePlayEntry row .1.3.6.1.4.1.89.48.51.1

entry of TriplePlay table

Indexes

vlanTriplePlayInnerVID

Column	Syntax	OID
vlanTriplePlayInnerVID Specifies the CPE inner vlan.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.48.51.1.1
vlanTriplePlayMulticastTvVID Specifies the multicast TV outer vlan.	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.89.48.51.1.2
vlanTriplePlayRowStatus The row status variable, used according to row creation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.51.1.3

TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan

vlanTriplePlayMulticatTvEntry row .1.3.6.1.4.1.89.48.52.1

entry of triple play MulticastTv table

Indexes

vlanTriplePlayMulticastTvMulticastTvVID

Column	Syntax	OID
vlanTriplePlayMulticastTvMulticastTvVID Specifies the multicast TV external vlan.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.48.52.1.1
vlanTriplePlayMulticastTvMulticastTvPortList the multicast tv port list.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.89.48.52.1.2

A table containing static configuration information for
each voice VLAN configured into the device and dynamic port membership.
All entries are permanent and will
be restored after the device is reset.

vlanVoiceEntry row .1.3.6.1.4.1.89.48.54.2.1

Information for a voice VLAN configured into the device by management.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
vlanVoicePriority An administratively assigned Priority, which will be used for all traffic on the voice vlan, this gives the packets the requested priority (CoS) within the bridge.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.89.48.54.2.1.1
vlanVoicePriorityRemark Remark VPT on tagged frames egress the voice vlan according. to priority true.false	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.48.54.2.1.2
vlanVoiceRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.54.2.1.3

A table containing static global configuration information for Voice VLANs OUI MAC Prefixes.
All entries are permanent and will be restored after the device is reset.

vlanVoiceOUIEntry row .1.3.6.1.4.1.89.48.54.3.1

Information for a voice VLANs OUI MAC Prefixes configured into the
device by management.

Indexes

vlanVoiceOUIPrefix

Column	Syntax	OID
vlanVoiceOUIPrefix The index value used to identify the OUI MAC Prefix component associated with this entry. The value of this object is used as an index to the vlanVoiceOUITable. Voice VLANs OUI Prefix is th…	OctetString Constraints: range: 3-3	.1.3.6.1.4.1.89.48.54.3.1.1
vlanVoiceOUIDescription An optional text that describes the OUI.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.89.48.54.3.1.2
vlanVoiceOUIEntryRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.54.3.1.3

A table containing static and dynamic per port configuration information for Voice VLAN.
All entries are permanent and will be restored after the device is reset.

vlanVoicePortEntry row .1.3.6.1.4.1.89.48.54.4.1

Static and dynamic per port information for a voice VLAN.

Indexes

IF-MIBifIndex

Column	Syntax	OID
vlanVoicePortEnable Enable this port to be a candidate to be added into the Voice VLAN.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.48.54.4.1.1
vlanVoicePortVlanIndex The Voice VLAN-ID the port is a candidate to be in.	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.89.48.54.4.1.2
vlanVoicePortSecure Specify this port to be in Secure Mode when entering the Voice VLAN. In Secure mode only frames with MAC prefix matched to one of the OUI table prefixes are accepted, otherwise dropped.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.48.54.4.1.3
vlanVoicePortCurrentMembership Port's current status of membership in Voice VLAN. Port's possible values of membership in Voice VLAN: 'Active(1)' - Port is currently added to a Voice VLAN . 'NotActive(2)' - Specifies either that p…	Enumeration Enumerated Values: 1 active 2 notActive	.1.3.6.1.4.1.89.48.54.4.1.4
vlanVoicePortQosMode Port's current QOS mode in Voice VLAN. Possible values: 'src(1)' - Only traffic with OUI prefix in the source MAC received QOS of the Voice Vlan. 'all(2)' - All traffic through that port received QOS of the Voice Vlan.	Enumerationr/w Enumerated Values: 1 src 2 all	.1.3.6.1.4.1.89.48.54.4.1.5

TriplePlay table, map CPE vlan to multicastTvVlan

vlanInetTriplePlayEntry row .1.3.6.1.4.1.89.48.56.1

entry of TriplePlay table

Indexes

vlanInetTriplePlayInetAddressType vlanTriplePlayInnerVID

Column	Syntax	OID
vlanInetTriplePlayInetAddressType Inet type IPv4/IPv6.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.89.48.56.1.1
vlanInetTriplePlayInnerVID Specifies the CPE inner vlan.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.48.56.1.2
vlanInetTriplePlayMulticastTvVID Specifies the multicast TV outer vlan.	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.89.48.56.1.3
vlanInetTriplePlayRowStatus The row status variable, used according to row creation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.56.1.4

TriplePlayMulticastTv table saves a list of ports for a certain multicastTvVlan

vlanInetTriplePlayMulticatTvEntry row .1.3.6.1.4.1.89.48.57.1

entry of triple play MulticastTv table

Indexes

vlanTriplePlayMulticastTvMulticastTvVID

Column	Syntax	OID
vlanInetTriplePlayMulticastTvMulticastTvVID Specifies the multicast TV external vlan.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.48.57.1.1
vlanInetTriplePlayMulticastTvMulticastTvPortList the multicast tv port list.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.89.48.57.1.2

Private vlan table which contains the private vlan entries.

vlanPrivateEntry row .1.3.6.1.4.1.89.48.59.1

Private vlan entry which contains the private vlan definition.

Indexes

vlanPrivateVid

Column	Syntax	OID
vlanPrivateVid The static vlan ID which is set to one of the private vlan types.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.48.59.1.1
vlanPrivateType private vlan types: none - Normal VLAN primary - Carries traffic from promiscuous ports. promiscuous port can communicate with all ports of the same PVLAN, incl…	Enumerationr/w Enumerated Values: 0 none 1 primary 2 isolated 3 community	.1.3.6.1.4.1.89.48.59.1.2
vlanPrivatePrimaryVid The primary vlan ID which has defined in VlanPrivateEntry and which is associated with secondary vlan (in vlanPrivateMapTable). vlanPrivatePrimaryVid is equivalent to vlanPrivateVid when vlanPrivateVid is primary vlan.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.48.59.1.3
vlanPrivateStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.59.1.4

Private vlan mapping table which contains the private vlan mapping entries.

vlanPrivateMapEntry row .1.3.6.1.4.1.89.48.60.1

Private vlan mapping entry which contains the primary / secondary
private vlan association and their ports membership.

Indexes

vlanPrivateMapPrimaryVid vlanPrivateMapSecondaryVid

Column	Syntax	OID
vlanPrivateMapPrimaryVid The primary private vlan ID which is associated with the secondary (isolated or community) vlan (vlanPrivateMapSecondaryVid).	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.48.60.1.1
vlanPrivateMapSecondaryVid The secondary private vlan ID which is associated with the primary vlan (vlanPrivateMapPrimaryVid).	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.48.60.1.2
vlanPrivateMapPrimaryPorts The private vlan promiscuous ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.89.48.60.1.3
vlanPrivateMapSecondaryPorts The private vlan host ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.89.48.60.1.4
vlanPrivateMapPrimaryOperPorts The private vlan active promiscuous ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.89.48.60.1.5
vlanPrivateMapSecondaryOperPorts The private vlan active host ports mode which are belongs to the association of vlanPrivateMapPrimaryVid and vlanPrivateMapSecondaryVid.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.89.48.60.1.6
vlanPrivateMapStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.60.1.7

The tables contains trunk mode port entries.

vlanTrunkPortModeEntry row .1.3.6.1.4.1.89.48.61.1

The entry contains port ifIndex,native vlan id and vlan list the port has a membership.
The vlan list can contain not created vlans.

Indexes

IF-MIBifIndex

Column	Syntax	OID
vlanTrunkPortModeNativeVlanId Indicated native vlan index.Default value 0	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.89.48.61.1.1
vlanTrunkModeList1to1024 vlan trunk mode list 1. Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList1r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.61.1.2
vlanTrunkModeList1025to2048 vlan trunk mode list 2. Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList2r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.61.1.3
vlanTrunkModeList2049to3072 vlan trunk mode list 3. Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList3r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.61.1.4
vlanTrunkModeList3073to4094 vlan trunk mode list 4. Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList4r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.61.1.5

The tables contains access mode port entries.

vlanAccessPortModeEntry row .1.3.6.1.4.1.89.48.62.1

The entry contains port ifIndex,access vlan id and multicast TV vlan id.

Indexes

IF-MIBifIndex

Column	Syntax	OID
vlanAccessPortModeVlanId Indicated access vlan id.Default value is 0	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.89.48.62.1.1
vlanAccessPortModeMcstTvVlanId Indicated multicast TV vlan id.	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.89.48.62.1.2

The tables contains customer mode port entries.

vlanCustomerPortModeEntry row .1.3.6.1.4.1.89.48.63.1

The entry contains port ifIndex,customer vlan id and customer multicast TV vlan id.

Indexes

IF-MIBifIndex

Column	Syntax	OID
vlanCustomerPortModeVlanId Indicated customer vlan id.Default value is 0	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.89.48.63.1.1
vlanCustomerPortModeMtvList1to1024 vlan customer port mode multicast TV list 1. Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList1 Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.63.1.2
vlanCustomerPortModeMtvList1025to2048 vlan customer port mode multicast TV list 2. Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList2 Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.63.1.3
vlanCustomerPortModeMtvList2049to3072 vlan customer port mode multicast TV list 3. Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList3 Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.63.1.4
vlanCustomerPortModeMtvList3073to4094 vlan customer port mode multicast TV list 4. Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList4 Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.63.1.5

The table defines L3/L2 port context.

vlanSwitchPortModeEntry row .1.3.6.1.4.1.89.48.64.1

The entry contains port ifIndex and switch port enable value.

Indexes

IF-MIBifIndex

Column	Syntax	OID
vlanSwitchPortModeCategory Indicated if a port is switchport (l2 port) or no switchport (l3 port) 1 - switchport 2 - no switchport. Default is 1	Enumerationr/w Enumerated Values: 1 l2 2 l3	.1.3.6.1.4.1.89.48.64.1.1

The tables contains current port mode context entries.

vlanPortModeContextEntry row .1.3.6.1.4.1.89.48.65.1

The entry contains current port mode context.

Indexes

IF-MIBifIndex

Column	Syntax	OID
vlanPortModeContextValue Indicated port context value: 0. Lag 1. Monitor 2. L3 3. RAVA 4. Dot1x 5. Dot1q 6. Access 7. Trunk 8. Customer 9. PV_promisc 10. PV_host	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.48.65.1.1

Shared vlan learning mapping table which contains the SVL mapping entries.

vlanRsvlMapEntry row .1.3.6.1.4.1.89.48.67.1

SVL mapping entry which contains the primary / secondary
SVL association.

Indexes

vlanRsvlMapPrimaryVid vlanRsvlMapSecondaryVid

Column	Syntax	OID
vlanRsvlMapPrimaryVid The primary SVL ID which is associated with the secondary shared vlan vlanRsvlMapSecondaryVid.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.48.67.1.1
vlanRsvlMapSecondaryVid The secondary SVL ID which is associated with the primary shared vlan vlanRsvlMapPrimaryVid.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.89.48.67.1.2
vlanRsvlMapStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.48.67.1.3

A table containing static vlan port membership information.

rldot1qPortVlanStaticEntry row .1.3.6.1.4.1.89.48.68.1

Static vlan membership information per port

Indexes

IF-MIBifIndex

Column	Syntax	OID
rldot1qPortVlanStaticEgressList1to1024 The port egress vlan static list.Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList1r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.68.1.1
rldot1qPortVlanStaticEgressList1025to2048 The port egress vlan static list.Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList2r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.68.1.2
rldot1qPortVlanStaticEgressList2049to3072 The port egress vlan static list.Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList3r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.68.1.3
rldot1qPortVlanStaticEgressList3073to4094 The port egress vlan static list.Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList4r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.68.1.4
rldot1qPortVlanStaticUntaggedEgressList1to1024 The port egress untagged vlan static list.Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList1r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.68.1.5
rldot1qPortVlanStaticUntaggedEgressList1025to2048 The port egress untagged vlan static list.Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList2r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.68.1.6
rldot1qPortVlanStaticUntaggedEgressList2049to3072 The port egress untagged vlan static list.Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList3r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.68.1.7
rldot1qPortVlanStaticUntaggedEgressList3073to4094 The port egress untagged vlan static list.Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList4r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.68.1.8
rldot1qPortVlanStaticForbiddenList1to1024 The port forbidden vlan static list.Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList1r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.68.1.9
rldot1qPortVlanStaticForbiddenList1025to2048 The port forbidden vlan static list.Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList2r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.68.1.10
rldot1qPortVlanStaticForbiddenList2049to3072 The port forbidden vlan static list.Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList3r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.68.1.11
rldot1qPortVlanStaticForbiddenList3073to4094 The port forbidden vlan static list.Default value is {0}	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList4r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.68.1.12

A table contains only one entry of a static vlan list.

rldot1qVlanStaticListEntry row .1.3.6.1.4.1.89.48.69.1

Staticly created by local or network management vlan list

Indexes

rldot1qVlanStaticListIndex

Column	Syntax	OID
rldot1qVlanStaticListIndex An index is entrie's sequence. This field substitutes a vlan type. If the vlan was created by user configuration then the type is static. If the vlan was created by GVRP/MVRP protocols then the type is dynamicGvrp. If t…	Enumerationr/w Enumerated Values: 0 static 1 dynamicGvrp 2 dynamicRava	.1.3.6.1.4.1.89.48.69.1.1
rldot1qVlanStaticList1to1024 A list of staticaly created vlans from 1 to 1024.	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList1r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.69.1.2
rldot1qVlanStaticList1025to2048 A list of according to the type field created vlans from 1025 to 2048.	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList2r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.69.1.3
rldot1qVlanStaticList2049to3072 A list of according to the type field created vlans from 2049 to 3072.	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList3r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.69.1.4
rldot1qVlanStaticList3073to4094 A list of according to the type field created vlans from 3073 to 4094.	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList4r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.69.1.5

A table contains created by user vlans names.

rldot1qVlanStaticNameEntry row .1.3.6.1.4.1.89.48.70.1

Staticly created by local or network management vlan list

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
rldot1qVlanStaticName An administratively assigned string,which may be used to identify the VLAN. The VLAN name must be unique or no name.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.89.48.70.1.1

A table saves a list of vlans per port/lag.

rlPortVlanTriplePlayMulticastTvEntry row .1.3.6.1.4.1.89.48.71.1

Entry of Triple Play Multicast Tv table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
rlPortVlanTriplePlayMulticastTvList1to1024 A list of staticaly created Triple Play MTV vlans from 1 to 1024.	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList1r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.71.1.1
rlPortVlanTriplePlayMulticastTvList1025to2048 A list of staticaly created Triple Play MTV vlans from 1025 to 2048.	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList2r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.71.1.2
rlPortVlanTriplePlayMulticastTvList2049to3072 A list of staticaly created Triple Play MTV vlans from 2049 to 3072.	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList3r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.71.1.3
rlPortVlanTriplePlayMulticastTvList3073to4094 A list of staticaly created Triple Play MTV vlans from 3073 to 4094.	RADLAN-BRIDGEMIBOBJECTS-MIBVlanList4r/w Type Constraints: range: 0..128	.1.3.6.1.4.1.89.48.71.1.4

A table contains a bitmap of the VLAN owners(applications) that can create the VLAN and/or add a port to the VLAN.

rldot1qVlanMembershipTypeEntry row .1.3.6.1.4.1.89.48.72.1

Staticly or dynamicly created VLAN ID owner entry

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
rldot1qVlanMembershipTypeBitmap This field contains a bitmap of owners that can creates and/or add a port to the VLAN. There exist three such type of owners : Default VLAN Manual created VLAN Dynamic(RAVA)created VLAN GVRP(MVRP)created VLAN	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.48.72.1.1