RADLAN-IPV6FHS-MIB Table View

The table specifies first hop security
per policy configurations.

rlFirstHopSecPolicyEntry row .1.3.6.1.4.1.89.215.1.1.1

The row definition for this table.

Indexes

rlFirstHopSecPolicyName

Column	Syntax	OID
rlFirstHopSecPolicyName The first hop security policy name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.1.1.1.1
rlFirstHopSecPolicyLogDrop Enable/disable of the logging of dropped packets.	RlIpv6FhsSettingStatusTyper/w Type Values: -1 unspecified 1 enabled 2 disabled	.1.3.6.1.4.1.89.215.1.1.1.2
rlFirstHopSecPolicyRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.215.1.1.1.3

The table specifies first hop security policy
attachment for ports.

rlFirstHopSecPortPolicyEntry row .1.3.6.1.4.1.89.215.1.2.1

The row definition for this table.

Indexes

rlFirstHopSecPortPolicyIfIndex rlFirstHopSecPortPolicyName

Column	Syntax	OID
rlFirstHopSecPortPolicyIfIndex The port's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.215.1.2.1.1
rlFirstHopSecPortPolicyName The first hop security policy name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.1.2.1.2
rlFirstHopSecPortPolicyVlan1to1024 A list of vlans from 1 to 1024.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.1.2.1.3
rlFirstHopSecPortPolicyVlan1025to2048 A list of vlans from 1025 to 2048.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.1.2.1.4
rlFirstHopSecPortPolicyVlan2049to3072 A list of vlans from 2049 to 3072.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.1.2.1.5
rlFirstHopSecPortPolicyVlan3073to4094 A list of vlans from 3073 to 4094.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.1.2.1.6
rlFirstHopSecPortPolicyRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.215.1.2.1.7

The table specifies first hop security policy
attachment for ports.

rlFirstHopSecPolicyPortEntry row .1.3.6.1.4.1.89.215.1.3.1

The row definition for this table.

Indexes

rlFirstHopSecPolicyPortName rlFirstHopSecPolicyPortIfIndex

Column	Syntax	OID
rlFirstHopSecPolicyPortName The first hop security policy name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.1.3.1.1
rlFirstHopSecPolicyPortIfIndex The port's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.215.1.3.1.2
rlFirstHopSecPolicyPortVlan1to1024 A list of vlans from 1 to 1024.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.89.215.1.3.1.3
rlFirstHopSecPolicyPortVlan1025to2048 A list of vlans from 1025 to 2048.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.89.215.1.3.1.4
rlFirstHopSecPolicyPortVlan2049to3072 A list of vlans from 2049 to 3072.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.89.215.1.3.1.5
rlFirstHopSecPolicyPortVlan3073to4094 A list of vlans from 3073 to 4094.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.89.215.1.3.1.6

The table specifies first hop security policy
attachment for vlans.

rlFirstHopSecVlanPolicyEntry row .1.3.6.1.4.1.89.215.1.4.1

The row definition for this table.

Indexes

rlFirstHopSecVlanPolicyVlanTag

Column	Syntax	OID
rlFirstHopSecVlanPolicyVlanTag The VLAN identifier.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.89.215.1.4.1.1
rlFirstHopSecVlanPolicyName The first hop security policy name	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.89.215.1.4.1.2
rlFirstHopSecVlanPolicyRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.215.1.4.1.3

The table specifies first hop security policy
attachment for vlans.

rlFirstHopSecPolicyVlanEntry row .1.3.6.1.4.1.89.215.1.5.1

The row definition for this table.

Indexes

rlFirstHopSecPolicyVlanPolicyName

Column	Syntax	OID
rlFirstHopSecPolicyVlanPolicyName The first hop security policy name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.1.5.1.1
rlFirstHopSecPolicyVlan1to1024 A list of vlans from 1 to 1024.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.1.5.1.2
rlFirstHopSecPolicyVlan1025to2048 A list of vlans from 1025 to 2048.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.1.5.1.3
rlFirstHopSecPolicyVlan2049to3072 A list of vlans from 2049 to 3072.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.1.5.1.4
rlFirstHopSecPolicyVlan3073to4094 A list of vlans from 3073 to 4094.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.1.5.1.5

A table contains only one entry of a static vlan list.

rlFirstHopSecEnableVlanEntry row .1.3.6.1.4.1.89.215.1.6.1

Statically created by local or network management vlan list

Indexes

rlFirstHopSecEnableVlanIndex

Column	Syntax	OID
rlFirstHopSecEnableVlanIndex The table contains only one static entry.	Enumeration Enumerated Values: 1 static	.1.3.6.1.4.1.89.215.1.6.1.1
rlFirstHopSecEnableVlan1to1024 A list of vlans from 1 to 1024.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.1.6.1.2
rlFirstHopSecEnableVlan1025to2048 A list of vlans from 1025 to 2048.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.1.6.1.3
rlFirstHopSecEnableVlan2049to3072 A list of vlans from 2049 to 3072.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.1.6.1.4
rlFirstHopSecEnableVlan3073to4094 A list of vlans from 3073 to 4094.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.1.6.1.5

The table specifies first hop security
per policy configurations.

rlFirstHopSecActivePolicyEntry row .1.3.6.1.4.1.89.215.1.7.1

The row definition for this table.

Indexes

rlFirstHopSecActivePolicyIfIndex rlFirstHopSecActivePolicyVlanTag

Column	Syntax	OID
rlFirstHopSecActivePolicyIfIndex The port's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.215.1.7.1.1
rlFirstHopSecActivePolicyVlanTag The VLAN identifier.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.89.215.1.7.1.2
rlFirstHopSecActivePolicyNamePort The first hop security policy name attached to given interface.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.1.7.1.3
rlFirstHopSecActivePolicyNameVlan The first hop security policy name attached to given vlan.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.1.7.1.4
rlFirstHopSecActivePolicyLogDrop Enable/disable of the logging of dropped packets.	RlIpv6FhsSettingStatusType Type Values: -1 unspecified 1 enabled 2 disabled	.1.3.6.1.4.1.89.215.1.7.1.5
rlFirstHopSecActivePolicyLogDropType rlFirstHopSecActivePolicyLogDrop setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.1.7.1.6

The table displays first hop security counters

rlFirstHopSecCountersEntry row .1.3.6.1.4.1.89.215.1.8.1

The row definition for this table.

Indexes

rlFirstHopSecCountersIfIndex

Column	Syntax	OID
rlFirstHopSecCountersIfIndex Interface index	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.215.1.8.1.1
rlFirstHopSecCountersRxNdpRA Number of NDP Router Advertisement messages received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.2
rlFirstHopSecCountersDropNdpRA Number of NDP Router Advertisement messages dropped on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.3
rlFirstHopSecCountersRxNdpRS Number of NDP Router Solicitation messages received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.4
rlFirstHopSecCountersDropNdpRS Number of NDP Router Solicitation messages dropped on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.5
rlFirstHopSecCountersRxNdpNA Number of NDP Neighbor Advertisement messages received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.6
rlFirstHopSecCountersDropNdpNA Number of NDP Neighbor Advertisement messages dropped on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.7
rlFirstHopSecCountersRxNdpNS Number of NDP Neighbor Solicitation messages received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.8
rlFirstHopSecCountersDropNdpNS Number of NDP Neighbor Solicitation messages dropped on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.9
rlFirstHopSecCountersRxNdpRedirect Number of NDP Redirect messages received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.10
rlFirstHopSecCountersDropNdpRedirect Number of NDP Redirect messages dropped on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.11
rlFirstHopSecCountersRxDhcpAdverise Number of DHCPv6 ADVERTISE messages received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.12
rlFirstHopSecCountersDropDhcpAdverise Number of DHCPv6 ADVERTISE messages dropped on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.13
rlFirstHopSecCountersRxDhcpReply Number of DHCPv6 REPLY messages received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.14
rlFirstHopSecCountersDropDhcpReply Number of DHCPv6 REPLY messages dropped on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.15
rlFirstHopSecCountersRxDhcpReconfigure Number of DHCPv6 RECONFIGURE messages received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.16
rlFirstHopSecCountersDropDhcpReconfigure Number of DHCPv6 RECONFIGURE messages dropped on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.17
rlFirstHopSecCountersRxDhcpRelayReply Number of DHCPv6 RELAY-REPLY messages received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.18
rlFirstHopSecCountersDropDhcpRelayReply Number of DHCPv6 RELAY-REPLY messages dropped on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.19
rlFirstHopSecCountersRxDhcpLeasequeryReply Number of DHCPv6 LEASEQUERY-REPLY messages received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.20
rlFirstHopSecCountersDropDhcpLeasequeryReply Number of DHCPv6 LEASEQUERY-REPLY messages dropped on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.21
rlFirstHopSecCountersDropRaGuardUnauthorizedMessage Number of dropped router messages received on host interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.22
rlFirstHopSecCountersDropRaGuardUnauthorizedHopLimit Number of dropped RA messages due to unauthorized Cur-Hop-Limit.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.23
rlFirstHopSecCountersDropRaGuardUnauthorizedManagedConfigFlag Number of dropped RA messages due to unauthorized Managed config flag.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.24
rlFirstHopSecCountersDropRaGuardUnauthorizedOtherConfigFlag Number of dropped RA messages due to unauthorized Other config flag.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.25
rlFirstHopSecCountersDropRaGuardUnauthorizedRouterPreference Number of dropped RA messages due to unauthorized router preference.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.26
rlFirstHopSecCountersDropRaGuardUnauthorizedAdvertisedPrefix Number of dropped RA messages due to unauthorized advertised prefix.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.27
rlFirstHopSecCountersDropRaGuardUnauthorizedSourceAddress Number of dropped RA messages due to unauthorized source address.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.28
rlFirstHopSecCountersDropNdInspectionInvalidSourceMac Number of dropped NDP messages due to invalid source MAC address.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.29
rlFirstHopSecCountersDropNdInspectionUnsecureMessage Number of dropped NDP messages due to being unsecure.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.30
rlFirstHopSecCountersDropNdInspectionUnauthorizedSecLevel Number of dropped NDP messages due to unauthorized CGA sec-level.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.31
rlFirstHopSecCountersDropDhcpGuardUnauthorizedMessage Number of dropped DHCPv6 server messages on client interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.32
rlFirstHopSecCountersDropDhcpGuardUnauthorizedSourceAddress Number of dropped DHCPv6 server messages due to unauthorized source address.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.33
rlFirstHopSecCountersDropDhcpGuardUnauthorizedServerPreference Number of dropped DHCPv6 server messages due to unauthorized server preference.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.34
rlFirstHopSecCountersDropDhcpGuardUnauthorizedAssignedAddress Number of dropped DHCPv6 server messages due to unauthorized address in IA_ADDR.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.35
rlFirstHopSecCountersDropSourceGuardNoBinding Number of frame dropped by IPv6 Source Guard due to lack of binding in Neighbor Binding Table.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.36
rlFirstHopSecCountersDropNbrBindingIntegrityIllegalIcmpv6 Number of dropped ICMPv6 messages due to one of the following reasons: invalid source address, invalid destination address, invalid Hop-Limit, invalid ICMP code, invalid ICMP length, invalid ICMP checksum, invalid targe…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.37
rlFirstHopSecCountersDropNbrBindingIntegrityIllegalDhcpv6 Number of dropped DHCPv6 messages due to one of the following reasons: invalid source address, invalid destination address, invalid Hop-Limit, invalid ICMP code, invalid ICMP length, invalid ICMP checksum, invalid targe…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.38
rlFirstHopSecCountersRxDhcpRelease Number of DHCPv6 RELEASE messages received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.39
rlFirstHopSecCountersDropDhcpRelease Number of DHCPv6 RELEASE messages dropped on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.40
rlFirstHopSecCountersRxDhcpDecline Number of DHCPv6 DECLINE messages received on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.41
rlFirstHopSecCountersDropDhcpDecline Number of DHCPv6 DECLINE messages dropped on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.8.1.42

The table displays first hop security error counters

rlFirstHopSecErrorCountersEntry row .1.3.6.1.4.1.89.215.1.11.1

Static row for this table.

Indexes

rlFirstHopSecErrorCountersIndex

Column	Syntax	OID
rlFirstHopSecErrorCountersIndex The table contains only one static entry.	Enumeration Enumerated Values: 1 static	.1.3.6.1.4.1.89.215.1.11.1.1
rlFirstHopSecErrorCountersNBTOverflow Counts Neighbor Binding Table overflow	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.11.1.2
rlFirstHopSecErrorCountersNPTOverflow Counts Neighbor Prefix Table overflow	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.11.1.3
rlFirstHopSecErrorCountersTcamOverflow Counts TCAM overflow	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.1.11.1.4

The table specifies ND inspection
per policy configurations.

rlNdInspectionPolicyEntry row .1.3.6.1.4.1.89.215.2.1.1

The row definition for this table.

Indexes

rlNdInspectionPolicyName

Column	Syntax	OID
rlNdInspectionPolicyName The ND inspection policy name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.2.1.1.1
rlNdInspectionPolicyDeviceRole Specify the role of the device attached.	Enumerationr/w Enumerated Values: -1 unspecified 1 host 2 router	.1.3.6.1.4.1.89.215.2.1.1.2
rlNdInspectionPolicyDropUnsecured Enable/disable of dropping unsecured messages.	RlIpv6FhsSettingStatusTyper/w Type Values: -1 unspecified 1 enabled 2 disabled	.1.3.6.1.4.1.89.215.2.1.1.3
rlNdInspectionPolicySecLevelMin The minimum security level parameter value when Cryptographically Generated Address (CGA) options are used. The value of -1 indicates unspecified value. The value of -2 indicates verification of security level is disabl…	Integer32r/w Constraints: range: -2-7	.1.3.6.1.4.1.89.215.2.1.1.4
rlNdInspectionPolicyValidateSrcMac Enable/disable validating of the source media access control (MAC) address against the link-layer address.	RlIpv6FhsSettingStatusTyper/w Type Values: -1 unspecified 1 enabled 2 disabled	.1.3.6.1.4.1.89.215.2.1.1.5
rlNdInspectionPolicyRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.215.2.1.1.6

The table specifies ND inspection policy
attachment for ports.

rlNdInspectionPortPolicyEntry row .1.3.6.1.4.1.89.215.2.2.1

The row definition for this table.

Indexes

rlNdInspectionPortPolicyIfIndex rlNdInspectionPortPolicyName

Column	Syntax	OID
rlNdInspectionPortPolicyIfIndex The port's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.215.2.2.1.1
rlNdInspectionPortPolicyName The ND inspection policy name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.2.2.1.2
rlNdInspectionPortPolicyVlan1to1024 A list of vlans from 1 to 1024.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.2.2.1.3
rlNdInspectionPortPolicyVlan1025to2048 A list of vlans from 1025 to 2048.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.2.2.1.4
rlNdInspectionPortPolicyVlan2049to3072 A list of vlans from 2049 to 3072.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.2.2.1.5
rlNdInspectionPortPolicyVlan3073to4094 A list of vlans from 3073 to 4094.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.2.2.1.6
rlNdInspectionPortPolicyRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.215.2.2.1.7

The table specifies ND inspection policy
attachment for ports.

rlNdInspectionPolicyPortEntry row .1.3.6.1.4.1.89.215.2.3.1

The row definition for this table.

Indexes

rlNdInspectionPolicyPortName rlNdInspectionPolicyPortIfIndex

Column	Syntax	OID
rlNdInspectionPolicyPortName The ND inspection policy name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.2.3.1.1
rlNdInspectionPolicyPortIfIndex The port's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.215.2.3.1.2
rlNdInspectionPolicyPortVlan1to1024 A list of vlans from 1 to 1024.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.89.215.2.3.1.3
rlNdInspectionPolicyPortVlan1025to2048 A list of vlans from 1025 to 2048.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.89.215.2.3.1.4
rlNdInspectionPolicyPortVlan2049to3072 A list of vlans from 2049 to 3072.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.89.215.2.3.1.5
rlNdInspectionPolicyPortVlan3073to4094 A list of vlans from 3073 to 4094.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.89.215.2.3.1.6

The table specifies ND inspection policy
attachment for vlans.

rlNdInspectionVlanPolicyEntry row .1.3.6.1.4.1.89.215.2.4.1

The row definition for this table.

Indexes

rlNdInspectionVlanPolicyVlanTag

Column	Syntax	OID
rlNdInspectionVlanPolicyVlanTag The VLAN identifier.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.89.215.2.4.1.1
rlNdInspectionVlanPolicyName The ND inspection policy name	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.89.215.2.4.1.2
rlNdInspectionVlanPolicyRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.215.2.4.1.3

The table specifies ND inspection policy
attachment for vlans.

rlNdInspectionPolicyVlanEntry row .1.3.6.1.4.1.89.215.2.5.1

The row definition for this table.

Indexes

rlNdInspectionPolicyVlanPolicyName

Column	Syntax	OID
rlNdInspectionPolicyVlanPolicyName The ND inspection policy name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.2.5.1.1
rlNdInspectionPolicyVlan1to1024 A list of vlans from 1 to 1024.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.2.5.1.2
rlNdInspectionPolicyVlan1025to2048 A list of vlans from 1025 to 2048.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.2.5.1.3
rlNdInspectionPolicyVlan2049to3072 A list of vlans from 2049 to 3072.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.2.5.1.4
rlNdInspectionPolicyVlan3073to4094 A list of vlans from 3073 to 4094.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.2.5.1.5

A table contains only one entry of a static vlan list.

rlNdInspectionEnableVlanEntry row .1.3.6.1.4.1.89.215.2.6.1

Statically created by local or network management vlan list

Indexes

rlNdInspectionEnableVlanIndex

Column	Syntax	OID
rlNdInspectionEnableVlanIndex The table contains only one static entry.	Enumeration Enumerated Values: 1 static	.1.3.6.1.4.1.89.215.2.6.1.1
rlNdInspectionEnableVlan1to1024 A list of vlans from 1 to 1024.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.2.6.1.2
rlNdInspectionEnableVlan1025to2048 A list of vlans from 1025 to 2048.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.2.6.1.3
rlNdInspectionEnableVlan2049to3072 A list of vlans from 2049 to 3072.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.2.6.1.4
rlNdInspectionEnableVlan3073to4094 A list of vlans from 3073 to 4094.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.2.6.1.5

The table specifies ND inspection
per policy configurations.

rlNdInspectionActivePolicyEntry row .1.3.6.1.4.1.89.215.2.7.1

The row definition for this table.

Indexes

rlNdInspectionActivePolicyIfIndex rlNdInspectionActivePolicyVlanTag

Column	Syntax	OID
rlNdInspectionActivePolicyIfIndex The port's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.215.2.7.1.1
rlNdInspectionActivePolicyVlanTag The VLAN identifier.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.89.215.2.7.1.2
rlNdInspectionActivePolicyNamePort The ND inspection policy name attached to given interface.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.2.7.1.3
rlNdInspectionActivePolicyNameVlan The ND inspection policy name attached to given vlan.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.2.7.1.4
rlNdInspectionActivePolicyDeviceRole Specify the role of the device attached.	Enumeration Enumerated Values: 1 host 2 router	.1.3.6.1.4.1.89.215.2.7.1.5
rlNdInspectionActivePolicyDeviceRoleType rlNdInspectionActivePolicyDeviceRole setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.2.7.1.6
rlNdInspectionActivePolicyDropUnsecured Enable/disable of dropping unsecured messages.	RlIpv6FhsSettingStatusType Type Values: -1 unspecified 1 enabled 2 disabled	.1.3.6.1.4.1.89.215.2.7.1.7
rlNdInspectionActivePolicyDropUnsecuredType rlNdInspectionActivePolicyDropUnsecured setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.2.7.1.8
rlNdInspectionActivePolicySecLevelMin The minimum security level parameter value when Cryptographically Generated Address (CGA) options are used. The value of -2 indicates verification of security level is disabled.	Integer32 Constraints: range: -2--2 range: 0-7	.1.3.6.1.4.1.89.215.2.7.1.9
rlNdInspectionActivePolicySecLevelMinType rlNdInspectionActivePolicySecLevelMin setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.2.7.1.10
rlNdInspectionActivePolicyValidateSrcMac Enable/disable validating of the source media access control (MAC) address against the link-layer address.	RlIpv6FhsSettingStatusType Type Values: -1 unspecified 1 enabled 2 disabled	.1.3.6.1.4.1.89.215.2.7.1.11
rlNdInspectionActivePolicyValidateSrcMacType rlNdInspectionActivePolicyValidateSrcMac setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.2.7.1.12

The table specifies RA guard
per policy configurations.

rlRaGuardPolicyEntry row .1.3.6.1.4.1.89.215.3.1.1

The row definition for this table.

Indexes

rlRaGuardPolicyName

Column	Syntax	OID
rlRaGuardPolicyName The RA Guard policy name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.3.1.1.1
rlRaGuardPolicyDeviceRole Specify the role of the device attached.	Enumerationr/w Enumerated Values: -1 unspecified 1 host 2 router	.1.3.6.1.4.1.89.215.3.1.1.2
rlRaGuardPolicyHopLimitMin Minimum hop-count limit. A value of -1 indicates unspecified value. A value of 0 indicates validation is disabled.	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.89.215.3.1.1.3
rlRaGuardPolicyHopLimitMax Maximum hop-count limit. A value of -1 indicates unspecified value. A value of 0 indicates validation is disabled.	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.89.215.3.1.1.4
rlRaGuardPolicyManagedConfigFlag Configuration of -Managed address configuration- flag verification.	Enumerationr/w Enumerated Values: -1 unspecified 0 disabled 1 enabled-off 2 enabled-on	.1.3.6.1.4.1.89.215.3.1.1.5
rlRaGuardPolicyMatchRaAddrSpecified Indicates whether the rlRaGuardPolicyMatchRaAddr is specified	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.215.3.1.1.6
rlRaGuardPolicyMatchRaAddr The IPv6 prefix list to be matched for router's source IPv6 address. Relevant only when rlRaGuardPolicyMatchRaAddrSpecified is true. The empty string means this validation is disabled.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.89.215.3.1.1.7
rlRaGuardPolicyMatchRaPrefixesSpecified Indicates whether the rlRaGuardPolicyMatchRaPrefixes is specified	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.215.3.1.1.8
rlRaGuardPolicyMatchRaPrefixes The IPv6 prefix list to be matched for advertised prefixes. Relevant only when rlRaGuardPolicyMatchRaPrefixesSpecified is true. The empty string means this validation is disabled.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.89.215.3.1.1.9
rlRaGuardPolicyOtherConfigFlag Configuration of -Other configuration- flag verification.	Enumerationr/w Enumerated Values: -1 unspecified 0 disabled 1 enabled-off 2 enabled-on	.1.3.6.1.4.1.89.215.3.1.1.10
rlRaGuardPolicyRouterPrefMin Minimum advertised preference limit.	Enumerationr/w Enumerated Values: -1 unspecified 0 disabled 1 low 2 medium 3 high	.1.3.6.1.4.1.89.215.3.1.1.11
rlRaGuardPolicyRouterPrefMax Maximum advertised preference limit.	Enumerationr/w Enumerated Values: -1 unspecified 0 disabled 1 low 2 medium 3 high	.1.3.6.1.4.1.89.215.3.1.1.12
rlRaGuardPolicyRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.215.3.1.1.13

The table specifies RA guard policy
attachment for ports.

rlRaGuardPortPolicyEntry row .1.3.6.1.4.1.89.215.3.2.1

The row definition for this table.

Indexes

rlRaGuardPortPolicyIfIndex rlRaGuardPortPolicyName

Column	Syntax	OID
rlRaGuardPortPolicyIfIndex The port's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.215.3.2.1.1
rlRaGuardPortPolicyName The RA Guard policy name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.3.2.1.2
rlRaGuardPortPolicyVlan1to1024 A list of vlans from 1 to 1024.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.3.2.1.3
rlRaGuardPortPolicyVlan1025to2048 A list of vlans from 1025 to 2048.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.3.2.1.4
rlRaGuardPortPolicyVlan2049to3072 A list of vlans from 2049 to 3072.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.3.2.1.5
rlRaGuardPortPolicyVlan3073to4094 A list of vlans from 3073 to 4094.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.3.2.1.6
rlRaGuardPortPolicyRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.215.3.2.1.7

The table specifies RA guard policy
attachment for ports.

rlRaGuardPolicyPortEntry row .1.3.6.1.4.1.89.215.3.3.1

The row definition for this table.

Indexes

rlRaGuardPolicyPortName rlRaGuardPolicyPortIfIndex

Column	Syntax	OID
rlRaGuardPolicyPortName The RA Guard policy name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.3.3.1.1
rlRaGuardPolicyPortIfIndex The port's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.215.3.3.1.2
rlRaGuardPolicyPortVlan1to1024 A list of vlans from 1 to 1024.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.89.215.3.3.1.3
rlRaGuardPolicyPortVlan1025to2048 A list of vlans from 1025 to 2048.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.89.215.3.3.1.4
rlRaGuardPolicyPortVlan2049to3072 A list of vlans from 2049 to 3072.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.89.215.3.3.1.5
rlRaGuardPolicyPortVlan3073to4094 A list of vlans from 3073 to 4094.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.89.215.3.3.1.6

The table specifies RA guard policy
attachment for vlans.

rlRaGuardVlanPolicyEntry row .1.3.6.1.4.1.89.215.3.4.1

The row definition for this table.

Indexes

rlRaGuardVlanPolicyVlanTag

Column	Syntax	OID
rlRaGuardVlanPolicyVlanTag The VLAN identifier.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.89.215.3.4.1.1
rlRaGuardVlanPolicyName The RA Guard policy name.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.89.215.3.4.1.2
rlRaGuardVlanPolicyRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.215.3.4.1.3

The table specifies RA guard policy
attachment for vlans.

rlRaGuardPolicyVlanEntry row .1.3.6.1.4.1.89.215.3.5.1

The row definition for this table.

Indexes

rlRaGuardPolicyVlanPolicyName

Column	Syntax	OID
rlRaGuardPolicyVlanPolicyName The RA Guard policy name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.3.5.1.1
rlRaGuardPolicyVlan1to1024 A list of vlans from 1 to 1024.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.3.5.1.2
rlRaGuardPolicyVlan1025to2048 A list of vlans from 1025 to 2048.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.3.5.1.3
rlRaGuardPolicyVlan2049to3072 A list of vlans from 2049 to 3072.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.3.5.1.4
rlRaGuardPolicyVlan3073to4094 A list of vlans from 3073 to 4094.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.3.5.1.5

A table contains only one entry of a static vlan list.

rlRaGuardEnableVlanEntry row .1.3.6.1.4.1.89.215.3.6.1

Statically created by local or network management vlan list

Indexes

rlRaGuardEnableVlanIndex

Column	Syntax	OID
rlRaGuardEnableVlanIndex The table contains only one static entry.	Enumeration Enumerated Values: 1 static	.1.3.6.1.4.1.89.215.3.6.1.1
rlRaGuardEnableVlan1to1024 A list of vlans from 1 to 1024.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.3.6.1.2
rlRaGuardEnableVlan1025to2048 A list of vlans from 1025 to 2048.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.3.6.1.3
rlRaGuardEnableVlan2049to3072 A list of vlans from 2049 to 3072.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.3.6.1.4
rlRaGuardEnableVlan3073to4094 A list of vlans from 3073 to 4094.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.3.6.1.5

The table specifies RA Guard
per policy configurations.

rlRaGuardActivePolicyEntry row .1.3.6.1.4.1.89.215.3.7.1

The row definition for this table.

Indexes

rlRaGuardActivePolicyIfIndex rlRaGuardActivePolicyVlanTag

Column	Syntax	OID
rlRaGuardActivePolicyIfIndex The port's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.215.3.7.1.1
rlRaGuardActivePolicyVlanTag The VLAN identifier.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.89.215.3.7.1.2
rlRaGuardActivePolicyNamePort The RA Guard policy name attached to given interface.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.3.7.1.3
rlRaGuardActivePolicyNameVlan The RA Guard policy name attached to given vlan.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.3.7.1.4
rlRaGuardActivePolicyDeviceRole Specify the role of the device attached.	Enumeration Enumerated Values: 1 host 2 router	.1.3.6.1.4.1.89.215.3.7.1.5
rlRaGuardActivePolicyDeviceRoleType rlRaGuardActivePolicyDeviceRole setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.3.7.1.6
rlRaGuardActivePolicyHopLimitMin Minimum hop-count limit. A value of 0 indicates validation is disabled.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.89.215.3.7.1.7
rlRaGuardActivePolicyHopLimitMinType rlRaGuardActivePolicyHopLimitMin setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.3.7.1.8
rlRaGuardActivePolicyHopLimitMax Maximum hop-count limit. A value of 0 indicates validation is disabled.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.89.215.3.7.1.9
rlRaGuardActivePolicyHopLimitMaxType rlRaGuardActivePolicyHopLimitMax setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.3.7.1.10
rlRaGuardActivePolicyManagedConfigFlag Configuration of -Managed address configuration- flag verification.	Enumeration Enumerated Values: 0 disabled 1 enabled-off 2 enabled-on	.1.3.6.1.4.1.89.215.3.7.1.11
rlRaGuardActivePolicyManagedConfigFlagType rlRaGuardActivePolicyManagedConfigFlag setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.3.7.1.12
rlRaGuardActivePolicyMatchRaAddr The IPv6 prefix list to be matched for router's source IPv6 address. The empty string means this validation is disabled.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.89.215.3.7.1.13
rlRaGuardActivePolicyMatchRaAddrType rlRaGuardActivePolicyMatchRaAddr setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.3.7.1.14
rlRaGuardActivePolicyMatchRaPrefixes The IPv6 prefix list to be matched for advertised prefixes. The empty string means this validation is disabled.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.89.215.3.7.1.15
rlRaGuardActivePolicyMatchRaPrefixesType rlRaGuardActivePolicyMatchRaPrefixes setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.3.7.1.16
rlRaGuardActivePolicyOtherConfigFlag Configuration of -Other configuration- flag verification.	Enumeration Enumerated Values: 0 disabled 1 enabled-off 2 enabled-on	.1.3.6.1.4.1.89.215.3.7.1.17
rlRaGuardActivePolicyOtherConfigFlagType rlRaGuardActivePolicyOtherConfigFlag setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.3.7.1.18
rlRaGuardActivePolicyRouterPrefMin Minimum advertised preference limit.	Enumeration Enumerated Values: 0 disabled 1 low 2 medium 3 high	.1.3.6.1.4.1.89.215.3.7.1.19
rlRaGuardActivePolicyRouterPrefMinType rlRaGuardActivePolicyRouterPrefMin setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.3.7.1.20
rlRaGuardActivePolicyRouterPrefMax Maximum advertised preference limit.	Enumeration Enumerated Values: 0 disabled 1 low 2 medium 3 high	.1.3.6.1.4.1.89.215.3.7.1.21
rlRaGuardActivePolicyRouterPrefMaxType rlRaGuardActivePolicyRouterPrefMax setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.3.7.1.22

The table specifies Neighbor Binding Integrity
per policy configurations.

rlNbrBindingIntegrityPolicyEntry row .1.3.6.1.4.1.89.215.4.1.1

The row definition for this table.

Indexes

rlNbrBindingIntegrityPolicyName

Column	Syntax	OID
rlNbrBindingIntegrityPolicyName Neighbor Binding Integrity policy name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.4.1.1.1
rlNbrBindingIntegrityPolicyDeviceRole Specify the role of the device attached.	Enumerationr/w Enumerated Values: -1 unspecified 1 perimeter 2 internal	.1.3.6.1.4.1.89.215.4.1.1.2
rlNbrBindingIntegrityPolicyLogBinding Enable/disable logging of Neighbor Binding Table events	RlIpv6FhsSettingStatusTyper/w Type Values: -1 unspecified 1 enabled 2 disabled	.1.3.6.1.4.1.89.215.4.1.1.3
rlNbrBindingIntegrityPolicyMaxEntriesVlanLimit Indicates how many entries can be added to Neighbor Binding Table with the same VLAN tag. The value of -1 indicates unspecified value. The value of -2 indicates there is no limit.	Integer32r/w Constraints: range: -2-65535	.1.3.6.1.4.1.89.215.4.1.1.4
rlNbrBindingIntegrityPolicyMaxEntriesInterfaceLimit Indicates how many entries can be added to Neighbor Binding Table with the same interface identifier. The value of -1 indicates unspecified value. The value of -2 indicates there is no limit.	Integer32r/w Constraints: range: -2-65535	.1.3.6.1.4.1.89.215.4.1.1.5
rlNbrBindingIntegrityPolicyMaxEntriesMacLimit Indicates how many entries can be added to Neighbor Binding Table with the same MAC address. The value of -1 indicates unspecified value. The value of -2 indicates there is no limit.	Integer32r/w Constraints: range: -2-65535	.1.3.6.1.4.1.89.215.4.1.1.6
rlNbrBindingIntegrityPolicyRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.215.4.1.1.7
rlNbrBindingIntegrityPolicyPrefixValidation Enable/disable address prefix validation using Neighbor Prefix Table.	RlIpv6FhsSettingStatusTyper/w Type Values: -1 unspecified 1 enabled 2 disabled	.1.3.6.1.4.1.89.215.4.1.1.8
rlNbrBindingIntegrityPolicyAddressConfig Specify the allowed methods for address binding in Neighbor Binding Table. autoconfig(1) refers to stateless address autoconfiguration. autoconfigAndManual(3) allows manual and stateless address autoconfiguration. dhcp(…	Enumerationr/w Enumerated Values: -1 unspecified 1 autoconfig 3 autoconfigAndManual 4 dhcp 5 autoconfigAndDhcp 7 autoconfigManualAndDhcp	.1.3.6.1.4.1.89.215.4.1.1.9

The table specifies Neighbor Binding Integrity policy
attachment for ports.

rlNbrBindingIntegrityPortPolicyEntry row .1.3.6.1.4.1.89.215.4.2.1

The row definition for this table.

Indexes

rlNbrBindingIntegrityPortPolicyIfIndex rlNbrBindingIntegrityPortPolicyName

Column	Syntax	OID
rlNbrBindingIntegrityPortPolicyIfIndex The port's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.215.4.2.1.1
rlNbrBindingIntegrityPortPolicyName The Neighbor Binding Integrity policy name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.4.2.1.2
rlNbrBindingIntegrityPortPolicyVlan1to1024 A list of vlans from 1 to 1024.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.4.2.1.3
rlNbrBindingIntegrityPortPolicyVlan1025to2048 A list of vlans from 1025 to 2048.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.4.2.1.4
rlNbrBindingIntegrityPortPolicyVlan2049to3072 A list of vlans from 2049 to 3072.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.4.2.1.5
rlNbrBindingIntegrityPortPolicyVlan3073to4094 A list of vlans from 3073 to 4094.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.4.2.1.6
rlNbrBindingIntegrityPortPolicyRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.215.4.2.1.7

The table specifies Neighbor Binding Integrity policy
attachment for ports.

rlNbrBindingIntegrityPolicyPortEntry row .1.3.6.1.4.1.89.215.4.3.1

The row definition for this table.

Indexes

rlNbrBindingIntegrityPolicyPortName rlNbrBindingIntegrityPolicyPortIfIndex

Column	Syntax	OID
rlNbrBindingIntegrityPolicyPortName The Neighbor Binding Integrity policy name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.4.3.1.1
rlNbrBindingIntegrityPolicyPortIfIndex The port's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.215.4.3.1.2
rlNbrBindingIntegrityPolicyPortVlan1to1024 A list of vlans from 1 to 1024.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.89.215.4.3.1.3
rlNbrBindingIntegrityPolicyPortVlan1025to2048 A list of vlans from 1025 to 2048.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.89.215.4.3.1.4
rlNbrBindingIntegrityPolicyPortVlan2049to3072 A list of vlans from 2049 to 3072.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.89.215.4.3.1.5
rlNbrBindingIntegrityPolicyPortVlan3073to4094 A list of vlans from 3073 to 4094.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.89.215.4.3.1.6

The table specifies Neighbor Binding Integrity policy
attachment for vlans.

rlNbrBindingIntegrityVlanPolicyEntry row .1.3.6.1.4.1.89.215.4.4.1

The row definition for this table.

Indexes

rlNbrBindingIntegrityVlanPolicyVlanTag

Column	Syntax	OID
rlNbrBindingIntegrityVlanPolicyVlanTag The VLAN identifier.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.89.215.4.4.1.1
rlNbrBindingIntegrityVlanPolicyName The Neighbor Binding Integrity policy name.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.89.215.4.4.1.2
rlNbrBindingIntegrityVlanPolicyRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.215.4.4.1.3

The table specifies Neighbor Binding Integrity policy
attachment for vlans.

rlNbrBindingIntegrityPolicyVlanEntry row .1.3.6.1.4.1.89.215.4.5.1

The row definition for this table.

Indexes

rlNbrBindingIntegrityPolicyVlanPolicyName

Column	Syntax	OID
rlNbrBindingIntegrityPolicyVlanPolicyName The Neighbor Binding Integrity policy name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.4.5.1.1
rlNbrBindingIntegrityPolicyVlan1to1024 A list of vlans from 1 to 1024.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.4.5.1.2
rlNbrBindingIntegrityPolicyVlan1025to2048 A list of vlans from 1025 to 2048.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.4.5.1.3
rlNbrBindingIntegrityPolicyVlan2049to3072 A list of vlans from 2049 to 3072.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.4.5.1.4
rlNbrBindingIntegrityPolicyVlan3073to4094 A list of vlans from 3073 to 4094.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.4.5.1.5

A table contains only one entry of a static vlan list.

rlNbrBindingIntegrityEnableVlanEntry row .1.3.6.1.4.1.89.215.4.6.1

Statically created by local or network management vlan list

Indexes

rlNbrBindingIntegrityEnableVlanIndex

Column	Syntax	OID
rlNbrBindingIntegrityEnableVlanIndex The table contains only one static entry.	Enumeration Enumerated Values: 1 static	.1.3.6.1.4.1.89.215.4.6.1.1
rlNbrBindingIntegrityEnableVlan1to1024 A list of vlans from 1 to 1024.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.4.6.1.2
rlNbrBindingIntegrityEnableVlan1025to2048 A list of vlans from 1025 to 2048.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.4.6.1.3
rlNbrBindingIntegrityEnableVlan2049to3072 A list of vlans from 2049 to 3072.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.4.6.1.4
rlNbrBindingIntegrityEnableVlan3073to4094 A list of vlans from 3073 to 4094.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.89.215.4.6.1.5

The table specifies Neighbor Binding Integrity binding table.

rlNbrBindingIntegrityBindingEntry row .1.3.6.1.4.1.89.215.4.7.1

The row definition for this table.

Indexes

rlNbrBindingIntegrityBindingVlanTag rlNbrBindingIntegrityBindingSourceAddressType rlNbrBindingIntegrityBindingSourceAddress

Column	Syntax	OID
rlNbrBindingIntegrityBindingVlanTag The binding entry's VLAN tag.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.89.215.4.7.1.1
rlNbrBindingIntegrityBindingSourceAddressType The binding entry's INET address type of the source. The only inet type that is supported is ipv6.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.89.215.4.7.1.2
rlNbrBindingIntegrityBindingSourceAddress The binding entry's INET address of the source.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.89.215.4.7.1.3
rlNbrBindingIntegrityBindingIfIndex The binding entry's anchor interface.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.215.4.7.1.4
rlNbrBindingIntegrityBindingMacAddress The binding entry's anchor MAC Address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.89.215.4.7.1.5
rlNbrBindingIntegrityBindingOrigin The binding entry's origin: local, static, ndp, dhcp.	Enumeration Enumerated Values: 1 static 2 ndp 3 dhcp	.1.3.6.1.4.1.89.215.4.7.1.6
rlNbrBindingIntegrityBindingState The binding entry's state: valid, tentative.	Enumeration Enumerated Values: 0 valid 1 tentative	.1.3.6.1.4.1.89.215.4.7.1.7
rlNbrBindingIntegrityBindingExpiryTime The time in seconds until the entry is expired. A value of 4294967295 denotes infinite lifetime.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.215.4.7.1.8
rlNbrBindingIntegrityBindingRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.215.4.7.1.9
rlNbrBindingIntegrityBindingTCAMOverflow Signs if entry is configured in TCAM	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.215.4.7.1.10

The table clears Neighbor Binding Integrity binding table
according to configured filters.

rlNbrBindingIntegrityClearEntry row .1.3.6.1.4.1.89.215.4.8.1

The row definition for this table.

Indexes

rlNbrBindingIntegrityClearIndex

Column	Syntax	OID
rlNbrBindingIntegrityClearIndex The row index in the table.	Enumeration Enumerated Values: 1 static	.1.3.6.1.4.1.89.215.4.8.1.1
rlNbrBindingIntegrityClearVlanTag Clear binding entries with this VLAN tag.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.89.215.4.8.1.2
rlNbrBindingIntegrityClearSourceAddressType Clear binding entries with this source address type. The only inet type that is supported is ipv6.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.89.215.4.8.1.3
rlNbrBindingIntegrityClearSourceAddress Clear binding entries with this source address.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.89.215.4.8.1.4
rlNbrBindingIntegrityClearIfIndex cClear binding entries with this anchor interface.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.215.4.8.1.5
rlNbrBindingIntegrityClearMacAddress clear binding entries with this anchor MAC Address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.89.215.4.8.1.6
rlNbrBindingIntegrityClearRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.215.4.8.1.7
rlNbrBindingIntegrityClearBindMethod clear dynamic entries bound using the specified method.	Enumerationr/w Enumerated Values: 1 ndp 2 dhcp	.1.3.6.1.4.1.89.215.4.8.1.8

The table specifies Neighbor Binding Integrity
per policy configurations.

rlNbrBindingIntegrityActivePolicyEntry row .1.3.6.1.4.1.89.215.4.9.1

The row definition for this table.

Indexes

rlNbrBindingIntegrityActivePolicyIfIndex rlNbrBindingIntegrityActivePolicyVlanTag

Column	Syntax	OID
rlNbrBindingIntegrityActivePolicyIfIndex The port's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.89.215.4.9.1.1
rlNbrBindingIntegrityActivePolicyVlanTag The VLAN identifier.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.89.215.4.9.1.2
rlNbrBindingIntegrityActivePolicyNamePort The Neighbor Binding Integrity policy name attached to given interface.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.4.9.1.3
rlNbrBindingIntegrityActivePolicyNameVlan The Neighbor Binding Integrity policy name attached to given vlan.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.89.215.4.9.1.4
rlNbrBindingIntegrityActivePolicyDeviceRole Specify the role of the device attached.	Enumeration Enumerated Values: 1 perimeter 2 internal	.1.3.6.1.4.1.89.215.4.9.1.5
rlNbrBindingIntegrityActivePolicyDeviceRoleType rlNbrBindingIntegrityActivePolicyDeviceRole setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.4.9.1.6
rlNbrBindingIntegrityActivePolicyLogBinding Enable/disable logging of Neighbor Binding Table events.	RlIpv6FhsSettingStatusType Type Values: -1 unspecified 1 enabled 2 disabled	.1.3.6.1.4.1.89.215.4.9.1.7
rlNbrBindingIntegrityActivePolicyLogBindingType rlNbrBindingIntegrityActivePolicyLogBinding setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.4.9.1.8
rlNbrBindingIntegrityActivePolicyMaxEntriesVlanLimit Indicates how many entries can be added to Neighbor Binding Table with the same VLAN tag. The value of -2 indicates there is no limit.	Integer32 Constraints: range: -2--2 range: 0-65535	.1.3.6.1.4.1.89.215.4.9.1.9
rlNbrBindingIntegrityActivePolicyMaxEntriesVlanLimitType rlNbrBindingIntegrityActivePolicyMaxEntriesVlanLimit setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.4.9.1.10
rlNbrBindingIntegrityActivePolicyMaxEntriesInterfaceLimit Indicates how many entries can be added to Neighbor Binding Table with the same interface identifier. The value of -2 indicates there is no limit.	Integer32 Constraints: range: -2--2 range: 0-65535	.1.3.6.1.4.1.89.215.4.9.1.11
rlNbrBindingIntegrityActivePolicyMaxEntriesInterfaceLimitType rlNbrBindingIntegrityActivePolicyMaxEntriesInterfaceLimit setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.4.9.1.12
rlNbrBindingIntegrityActivePolicyMaxEntriesMacLimit Indicates how many entries can be added to Neighbor Binding Table with the same MAC address. The value of -2 indicates there is no limit.	Integer32 Constraints: range: -2--2 range: 0-65535	.1.3.6.1.4.1.89.215.4.9.1.13
rlNbrBindingIntegrityActivePolicyMaxEntriesMacLimitType rlNbrBindingIntegrityActivePolicyMaxEntriesMacLimit setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.4.9.1.14
rlNbrBindingIntegrityActivePolicyBindingLifetime Neighbor Binding entry's default lifetime in seconds.	Integer32 Constraints: range: 60-3600	.1.3.6.1.4.1.89.215.4.9.1.15
rlNbrBindingIntegrityActivePolicyBindingLifetimeType rlNbrBindingIntegrityActivePolicyBindingLifetime setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.4.9.1.16
rlNbrBindingIntegrityActivePolicyPrefixValidation Enable/disable address prefix validation using Neighbor Prefix Table.	RlIpv6FhsSettingStatusType Type Values: -1 unspecified 1 enabled 2 disabled	.1.3.6.1.4.1.89.215.4.9.1.17
rlNbrBindingIntegrityActivePolicyPrefixValidationType rlNbrBindingIntegrityActivePolicyPrefixValidation setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.4.9.1.18
rlNbrBindingIntegrityActivePolicyAddressConfig Specify the allowed methods for address binding in Neighbor Binding Table. autoconfig(1) refers to stateless address autoconfiguration. autoconfigAndManual(3) allows manual and stateless address autoconfiguration. dhcp(…	Enumeration Enumerated Values: 1 autoconfig 3 autoconfigAndManual 4 dhcp 5 autoconfigAndDhcp 7 autoconfigManualAndDhcp	.1.3.6.1.4.1.89.215.4.9.1.19
rlNbrBindingIntegrityActivePolicyAddressConfigType rlNbrBindingIntegrityActivePolicyAddressConfig setting type.	RlIpv6FhsSettingType Type Values: 1 default 2 global 3 vlan 4 port	.1.3.6.1.4.1.89.215.4.9.1.20