RADLAN-IP-SLA Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
26

rlSLAOperTable

table
.1.3.6.1.4.1.89.231.1 · 1 row entry · 19 columns
Open in standard view
Uses the radlan variant from /opt/observium/mibs/radlan.
Command help
Walk rlSLAOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RADLAN-IP-SLA' -M '/opt/observium/mibs/radlan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RADLAN-IP-SLA::rlSLAOperTable' 
This table contains configured ip SLA operations
rlSLAOperEntry row .1.3.6.1.4.1.89.231.1.1
The row definition for this table.
Indexes
Column Syntax OID
rlSLAOperId
IP SLA operation index
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.89.231.1.1.1
rlSLAOperType
The IP SLA operation type.
Enumerationr/w
Enumerated Values:
1icmp-echo
 .1.3.6.1.4.1.89.231.1.1.2
rlSLAOperState
The IP SLA operation state.
Enumerationr/w
Enumerated Values:
0pending
1scheduled
 .1.3.6.1.4.1.89.231.1.1.3
rlSLAOperTimeout
The time in milliseconds an IP SLA operation waits for
a response.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.89.231.1.1.4
rlSLAOperFrequency
The rate (in seconds) at which a specified operation repeats.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.89.231.1.1.5
rlSLAOperReqDataSize
The payload size of the request packet of the IP SLA operation.
Unsigned32r/w
Constraints:
range: 28-1472
 .1.3.6.1.4.1.89.231.1.1.6
rlSLAOperReturnCode
The IP SLA operation return code.
Enumeration
Enumerated Values:
0success
1error
 .1.3.6.1.4.1.89.231.1.1.7
rlSLAOperDestAddrType
The inet type of destination address
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.89.231.1.1.8
rlSLAOperDestAddr
The destination address of operation (i.e. icmp-echo)
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.89.231.1.1.9
rlSLAOperSrcAddr
The source ip address of operation
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.89.231.1.1.10
rlSLAOperSuccessCounter
The IP SLA operation success counter.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.89.231.1.1.11
rlSLAOperFailureCounter
The IP SLA operation failure counter.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.89.231.1.1.12
rlSLAICMPEchoRequestCounter
The IP SLA operation ICMP-echo request counter.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.89.231.1.1.13
rlSLAICMPEchoReplyCounter
The IP SLA operation ICMP-echo reply counter.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.89.231.1.1.14
rlSLAICMPErrorCounter
The IP SLA operation ICMP-echo error counter.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.89.231.1.1.15
rlSLARowStatus
This variable displays the validity or invalidity of the entry.
Setting it to 'destroy' has the effect of rendering it inoperative.
The internal effect (row removal) is implementation dependent.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.89.231.1.1.16
rlSLAOperNextHopAddr
The next hop ip address
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.89.231.1.1.17
rlSLAICMPEchoHostUnreachCounter
The ICMP-echo host unreachable counter.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.89.231.1.1.18
rlSLAICMPEchoNonHostUnreachCounter
The ICMP-echo non host unreachable error counter.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.89.231.1.1.19

rlSLATrackTable

table
.1.3.6.1.4.1.89.231.2 · 1 row entry · 7 columns
Open in standard view
Uses the radlan variant from /opt/observium/mibs/radlan.
Command help
Walk rlSLATrackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RADLAN-IP-SLA' -M '/opt/observium/mibs/radlan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RADLAN-IP-SLA::rlSLATrackTable' 
Table of ip SLA operations track objects
rlSLATrackEntry row .1.3.6.1.4.1.89.231.2.1
The row definition for this table.
Indexes
Column Syntax OID
rlSLATrackObj
IP SLA track object identifier
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.89.231.2.1.1
rlSLATrackOperId
IP SLA operation index
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.89.231.2.1.2
rlSLAUpDelay
Delay time moving from down state to up state
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.89.231.2.1.3
rlSLADownDelay
Delay time moving from up state to down state
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.89.231.2.1.4
rlSLADelayReminder
Delay time moving from up state to down state
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.89.231.2.1.5
rlSLATrackObjState
The track object current state (Up or Down, default is: Up).
Enumeration
Enumerated Values:
0up
1down
 .1.3.6.1.4.1.89.231.2.1.6
rlSLATrackRowStatus
This variable displays the validity or invalidity of the entry.
Setting it to 'destroy' has the effect of rendering it inoperative.
The internal effect (row removal) is implementation dependent.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.89.231.2.1.7