RAD-SubRtr-MIB Table View

Table of configured interfaces.

rtrConfigIfEntry row .1.3.6.1.4.1.164.11.1.1.1

Each entry defines a configured interface.

Indexes

rtrConfigIfIndex

Column	Syntax	OID
rtrConfigIfIndex This variable uniquely identifies the interface. It is used as a cross reference in other system tables	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.164.11.1.1.1.1
rtrConfigIfType This variable identifies the type of the specific entry in the rtrDynamicIfConfigTable. This field is writable only at creation time (i.e., when value of status is underCreation).	RtrIfConfigTYPEr/w Type Values: 1 other 6 ethernetLan 7 iso88023Csmacd 9 tokenRingLan 15 fddi 20 basicISDN 21 primaryISDN 22 propPointToPoint 23 ppp 28 slip 32 frameRelay 33 rs232 37 atm 40 x25ple 45 v35 62 fastEther 69 fastEtherFX 500 virtualNet 1001 cod 1002 backUp 1004 dialUp 1010 b1isdn 1011 b2isdn 1020 ipBcst 1021 ipPtp 1022 ipxRaw 1023 ipxEtType 1024 ipxLlcSap 1025 ipxLlcSnap 1026 ipxPtp 1027 brgUnder 1060 wanDriver 1061 ethernetDriver 1062 tokenRingDriver 1064 fddiDriver 1080 virtualLan 1100 unknown	.1.3.6.1.4.1.164.11.1.1.1.2
rtrConfigIfName This variable provides a logical name to a specific entry in rtrConfigIfTable. It is also used in identifying the Driver interfaces.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.164.11.1.1.1.3
rtrConfigIfStatus The status of the ConfigEntry. The choices are those defined in SNMPv2-TC. Only: active, createAndWait, and destroy will be used. active - The conceptual row is available for use by the managed device. createAndWait -…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.11.1.1.1.4

Router Interface Configuration Table.

rtrIfCfgEntry row .1.3.6.1.4.1.164.11.1.2.1

An entry in the Router Interface Configuration Table.

Indexes

rtrIfCfgIndex rtrIfCfgIpAddress

Column	Syntax	OID
rtrIfCfgIndex This object indicates the Router Interface Index. (In some cases it will be equal to the Router Interface ifIndex).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.1.2.1.1
rtrIfCfgIpAddress IP Address of the Router Interface. - original description - deprecated. For new applications, this object will be dummy index with constant value 0.0.0.0 .	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.164.11.1.2.1.2
rtrIfCfgRowStatus This object enables the user to create/delete entries of this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.11.1.2.1.3
rtrIfCfgIpMaskdeprecated IP Mask Address Router Interface.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.11.1.2.1.4
rtrIfCfgIfIndex ifIndex of the device interface connected to this Router Interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.1.2.1.5
rtrIfCfgType The Router Interface Type. By default it shall be notApplicabe(1). atm - ATM router interface lis - Logical IP Subnet router interface. ethernet - Ethernet router interface. loopback - indicates whether th…	Enumerationr/w Enumerated Values: 1 notApplicable 2 atm 3 lis 4 ethernet 5 loopback 6 unmunbered	.1.3.6.1.4.1.164.11.1.2.1.6
rtrIfCfgVlanId The VLAN ID assigned to Tagged frames transmitted from this Router Interface. The value inserted should be a defined VLAN.	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.164.11.1.2.1.7
rtrIfCfgMtu The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that ca…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.1.2.1.8
rtrIfCfgName The Router Interface Name.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.11.1.2.1.9
rtrIfCfgConnectionPointer This parameter represents the entity that is connected to this Router Interface. The value of this parameter is a pointer to an existing row of a table, where the entity connected to this Router Interface…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.164.11.1.2.1.10
rtrIfCfgVlanTagging The VLAN Tagging.	Enumerationr/w Enumerated Values: 1 notApplicable 2 untag 3 tag	.1.3.6.1.4.1.164.11.1.2.1.11
rtrIfCfgVlanPriority The VLAN Priority.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.11.1.2.1.12
rtrIfCfgParams This object represents one or more parameters of the Router Interface. Each group of bits (one or more bits) represents a specific parameter and its possible values. This object's mapping and interpretation will be spec…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.11.1.2.1.13
rtrIfCfgMngAccess This object represents Management Access availability via this Router Interface. disable (2) - the access is disabled enable (3) - the access is enabled pingAllow (4) - the ping access only is allowed.	Enumerationr/w Enumerated Values: 1 notApplicable 2 disable 3 enable 4 pingAllow	.1.3.6.1.4.1.164.11.1.2.1.14
rtrIfCfgLlcSnapEncaps This object represents the LLC/SNAP Encapsulation.	Enumerationr/w Enumerated Values: 1 notApplicable 2 bridgedPdu 3 routedPdu	.1.3.6.1.4.1.164.11.1.2.1.15
rtrIfCfgDhcp This object indicates whether DHCP is enabled for this Router Interface.	Enumerationr/w Enumerated Values: 1 notApplicable 2 disable 3 enable	.1.3.6.1.4.1.164.11.1.2.1.16
rtrIfCfgIfIpAddressTypedeprecated This object indicates IP Address Type (v4, v6) of rtrIfIpAddress for this Router Interface.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.164.11.1.2.1.17
rtrIfCfgIfIpAddressdeprecated This object indicates IP address of this Router Interface.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.11.1.2.1.18
rtrIfCfgICMPUnreachable This object indicates whether sending ICMP Unreachable message is enabled for this Router Interface.	Enumerationr/w Enumerated Values: 2 disable 3 enable	.1.3.6.1.4.1.164.11.1.2.1.19
rtrIfCfgIpv6AutoConfig This object determines whether IPv6 auto-configuration is enabled for this Router Interface. disable (2) - IPv6 auto-configuration is disabled enable (3) - IPv6 auto-configuration is enabled	Enumerationr/w Enumerated Values: 2 disable 3 enable	.1.3.6.1.4.1.164.11.1.2.1.20
rtrIfCfgDhcpRelay This object indicates whether DHCP Relay is enabled for this Router Interface.	Enumerationr/w Enumerated Values: 2 disable 3 enable	.1.3.6.1.4.1.164.11.1.2.1.26
rtrIfCfgDhcpv6ClientAdminStatus This object defines the administrative status of DHCPv6 client for Router Interface.	Enumerationr/w Enumerated Values: 2 disable 3 enable	.1.3.6.1.4.1.164.11.1.2.1.27
rtrIfCfgIpForwarding This object defines whether received traffic into specific interface is forwarded to other Router Interfaces or not.	Enumerationr/w Enumerated Values: 2 disable 3 enable	.1.3.6.1.4.1.164.11.1.2.1.28

This entity's IP Routing table.

rtrStaticRouteEntry row .1.3.6.1.4.1.164.11.1.3.1

A particular route to a particular destination, under a
particular policy (as reflected in the
rtrStaticRoutePolicy object).

Dynamically created rows will survive an agent reboot.

Implementers …

Indexes

rtrStaticRouteDestType rtrStaticRouteDest rtrStaticRoutePfxLen rtrStaticRoutePolicy rtrStaticRouteNextHopType rtrStaticRouteNextHop

Column	Syntax	OID
rtrStaticRouteDestType The type of the rtrStaticRouteDest address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are allowed as values of this object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.164.11.1.3.1.1
rtrStaticRouteDest The destination IP address of this route. The type of this address is determined by the value of the rtrStaticRouteDestType object. The values for the index objects rtrStaticRouteDest and r…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.164.11.1.3.1.2
rtrStaticRoutePfxLen Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the rtrStaticRouteDest field. The values for the index ob…	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.164.11.1.3.1.3
rtrStaticRoutePolicy This object is an opaque object without any defined semantics. Its purpose is to serve as an additional index that may delineate between multiple entries to the same destination. The value { 0 0 } shall be used as the…	ObjectIdentifier	.1.3.6.1.4.1.164.11.1.3.1.4
rtrStaticRouteNextHopType The type of the rtrStaticRouteNextHop address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those address types that may appear in an act…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.164.11.1.3.1.5
rtrStaticRouteNextHop On remote routes, the address of the next system en route. For non-remote routes, a zero length string. The type of this address is determined by the value of the rtrStaticRouteNextHopType object.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.164.11.1.3.1.6
rtrStaticRouteRtRIfIndex This object is the Router IP Interface corresponding to rtrIfCfgEntry.rtrIfCfgIndex in opposite to the RFC4292 that define the object inetCidrRouteIfIndex - which is the ifIndex of the interface	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.1.3.1.7
rtrStaticRouteType The static Routing table shall have the type of route equal to remote(4) by default and cannot be changed by the user. Note that the other values are specified in order to keep consistency with the RFC4292.	Enumeration Enumerated Values: 1 other 2 reject 3 local 4 remote 5 blackhole	.1.3.6.1.4.1.164.11.1.3.1.8
rtrStaticRouteProto The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols. The default value shall be netmgmt(3) corresp…	IANA-RTPROTO-MIBIANAipRouteProtocol Type Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isIs 10 esIs 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp 15 idpr 16 ciscoEigrp 17 dvmrp 18 rpl 19 dhcp 20 ttdp	.1.3.6.1.4.1.164.11.1.3.1.9
rtrStaticRouteAge The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied, except through knowledge of the routing protocol by which the route was…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.11.1.3.1.10
rtrStaticRouteNextHopAS The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing- protocol specified in the route's rtrStaticRouteProto value. When this object is unknown or not relevant, its v…	INET-ADDRESS-MIBInetAutonomousSystemNumberr/w	.1.3.6.1.4.1.164.11.1.3.1.11
rtrStaticRouteMetric1 The primary routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's rtrStaticRouteProto value. If this metric is not used, its value should be set t…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.1.3.1.12
rtrStaticRouteMetric2 An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's rtrStaticRouteProto value. If this metric is not used, its value should be set …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.1.3.1.13
rtrStaticRouteMetric3 An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's rtrStaticRouteProto value. If this metric is not used, its value should be set …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.1.3.1.14
rtrStaticRouteMetric4 An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's rtrStaticRouteProto value. If this metric is not used, its value should be set …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.1.3.1.15
rtrStaticRouteMetric5 An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's rtrStaticRouteProto value. If this metric is not used, its value should be set …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.1.3.1.16
rtrStaticRouteStatus The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.11.1.3.1.17
rtrStaticRouteNoInstall Static Route entry option to not install the route into forwarding table.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.164.11.1.3.1.18

An Augment of RFC4293.ipIfStatsTable

ipIfStatsXEntry row .1.3.6.1.4.1.164.11.1.4.1

An entry in the table.

Indexes

No indexes recorded

Column	Syntax	OID
ipIfStatsXClearStatisticsCmd Indicates a user command to clear all counters in row.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.164.11.1.4.1.1

An Augment of RFC4293.ipSystemStatsTable

ipSystemStatsXEntry row .1.3.6.1.4.1.164.11.1.5.1

An entry in the table.

Indexes

No indexes recorded

Column	Syntax	OID
ipSystemStatsXClearStatisticsCmd Indicates a user command to clear all counters in row.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.164.11.1.5.1.1
ipSystemStatsXClearAllStatisticsCmd Clear action to be performed on one of the router's componenet's Statistics, or on all router component statistics.	Enumerationr/w Enumerated Values: 2 off 3 all 4 ip-traffic 5 access-list	.1.3.6.1.4.1.164.11.1.5.1.2

This table associates IP Address to Router Interface.

ifIpAddressEntry row .1.3.6.1.4.1.164.11.1.7.1

An entry in the Table.

Indexes

ifIpAddressAddrType ifIpAddressAddr ifIpAddressPrefixLength ifIpAddressIfIndex

Column	Syntax	OID
ifIpAddressAddrType The address type of IP Address associated to a Router Interface.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.164.11.1.7.1.1
ifIpAddressAddr The IP address associated to the Router Interface.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.164.11.1.7.1.2
ifIpAddressPrefixLength The prefix length associated with this prefix.	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.164.11.1.7.1.3
ifIpAddressIfIndex The ifIndex of the Router Interface to which the IP Address is associated.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.164.11.1.7.1.4
ifIpAddressRowStatus The status of this conceptual row. This object allows creating and deleting rows in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.11.1.7.1.5
ifIpAddressPrefix Indicates a the Prefix of the configured Address. IP Address and Prefix must have the same type (IPv4/IPv6). The address type of this object is specified in ipAddressAddrType. The length of this object is the standard l…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.164.11.1.7.1.6
ifIpAddressOrigin The Origin of the IP Address. manual (2) indicates that the address was manually configured to a specified address, e.g., by user configuration. dhcp (4) indicates an address that w…	Enumeration Enumerated Values: 1 other 2 manual 4 dhcp 5 linklayer 6 random 7 nat	.1.3.6.1.4.1.164.11.1.7.1.7

The Router Interface BFD Session Table specifies information
on BFD sessions attached to this Router Interface.

rtrIfCfgBfdSessEntry row .1.3.6.1.4.1.164.11.1.8.1

The Router Interface BFD Session Table specifies information
on BFD sessions attached to this Router Interface.

Indexes

rtrIfCfgIndex

Column	Syntax	OID
rtrIfCfgBfdSessDesiredMinTxInterval This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. The value of zero(0) is reserved, and should not be used.	Enumerationr/w Enumerated Values: 3300 interval3300microsec 10000 interval10000microsec 100000 interval100000microsec 1000000 interval1000000microsec 10000000 interval10000000microsec	.1.3.6.1.4.1.164.11.1.8.1.1
rtrIfCfgBfdSessReqMinRxInterval This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(0) can be specified when the transmitting system does not w…	Enumerationr/w Enumerated Values: 3300 interval3300microsec 10000 interval10000microsec 100000 interval100000microsec 1000000 interval1000000microsec 10000000 interval10000000microsec	.1.3.6.1.4.1.164.11.1.8.1.2
rtrIfCfgBfdSessDetectMult This object specifies the Detect time multiplier.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.1.8.1.3

This table is parralel to MIB II IpAddrTable, and is used to
add/delete entries to/from that table. In addition it contains
private objects.

rtrIpAddrEntry row .1.3.6.1.4.1.164.11.2.1.1

The addressing information for one of this
entity's IP addresses.

Indexes

rtrIpAdEntAddr

Column	Syntax	OID
rtrIpAdEntAddr The IP address to which this entry's addressing information pertains.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.164.11.2.1.1.1
rtrIpAdEntIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.2.1.1.2
rtrIpAdEntNetMask The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.11.2.1.1.3
rtrIpAdEntForwardIpBroadcast This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net).	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.164.11.2.1.1.4
rtrIpAdEntBackupAddr	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.11.2.1.1.5
rtrIpAdEntStatus The Status variable is used to create and destroy a Ip Addresses.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.11.2.1.1.6

This table contains ICMP Router Discovery parameters
configurated per IP interface.

rtrIcmpRdEntry row .1.3.6.1.4.1.164.11.2.2.2.1

The ICMP parameters configurated for IP interface.

Indexes

rtrIcmpRdIpAddr

Column	Syntax	OID
rtrIcmpRdIpAddr The IP address to which this entry's information pertains.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.164.11.2.2.2.1.1
rtrIcmpRdIpAdvertAddr The IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast address, 224.0.0.1, or the limited-broadcast address, 255.255.…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.11.2.2.2.1.2
rtrIcmpRdMaxAdvertInterval The maximum time allowed between sending multicast Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 1800 seconds.	Integer32r/w Constraints: range: 4-1800	.1.3.6.1.4.1.164.11.2.2.2.1.3
rtrIcmpRdMinAdvertInterval The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no greater than rtrIcmpRdMaxAdvertInterval. Default: 0.75 * rtrIcm…	Integer32r/w Constraints: range: 3-1800	.1.3.6.1.4.1.164.11.2.2.2.1.4
rtrIcmpRdAdvertLifetime The maximum length of time that the advertised addresses are to be considered as valid. Must be no less than rtrIcmpRdMaxAdvertInterval and no greater than 9000 seconds. Default: 3 * rtrIcmpRdMaxAdvertInterval.	Integer32r/w Constraints: range: 4-9000	.1.3.6.1.4.1.164.11.2.2.2.1.5
rtrIcmpRdAdvertise A flag indicating whether or not the address is to be advertised.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.164.11.2.2.2.1.6
rtrIcmpRdPreferenceLevel The preferability of the address as a default router address, relative to other router addresses on the same subnet.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.2.2.2.1.7
rtrIcmpRdEntStatus Setting of any value to this object set values of all fields to the default values.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.2.2.2.1.8

This table is an extension of rip2IfConfTable (RFC 1724 ,RIP 2).
It means that every time somebody creates/destroys a row in the
rip2IfConfTable, the same row should be automatically created/destroyed  
in this table.

rtrRip2IfConfEntry row .1.3.6.1.4.1.164.11.2.3.1.1

An entry in table rtrRip2IfConfTable.

Indexes

rtrRip2IfConfAddress

Column	Syntax	OID
rtrRip2IfConfAddress The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.164.11.2.3.1.1.1
rtrRip2IfConfVirtualDisdeprecated This variable defines the virtual number of hops assigned to the interface specified by rtrIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.2.3.1.1.2
rtrRip2IfConfAutoSenddeprecated When set to enable only the default route is sent through the interface. When set to disable, regular RIPs are sent.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.164.11.2.3.1.1.3
rtrRip2IfConfRipEnable This object shows whether RIP Protocol is enabled on the current interface.	Enumerationr/w Enumerated Values: 2 no 3 yes	.1.3.6.1.4.1.164.11.2.3.1.1.4

A list of interfaces which require separate NAT configuration.

rtrNatIfConfEntry row .1.3.6.1.4.1.164.11.2.5.1.1

A single routing domain in a single subnet.

Indexes

IF-MIBifIndex rtrNatIfVirtualAddress rtrNatIfVirtualMask

Column	Syntax	OID
rtrNatIfVirtualAddress The IP Address of the virtual subnet to be translated by the 'NAT box' attached to this interface. For some devices/cases, it might represent the Virtual Lowest IP Address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.164.11.2.5.1.1.1
rtrNatIfVirtualMask The subnet Mask of the virtual subnet. For some devices/cases, it might represent the Virtual Highest IP Address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.164.11.2.5.1.1.2
rtrNatIfConfStatus Writing 'destroy' has the effect of deleting this interface.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.11.2.5.1.1.3
rtrNatIfRealAddress The IP Address of the real subnet which is used by 'NAT box' for translation. For some devices/cases, it might represent the Real Lowest IP Address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.11.2.5.1.1.4
rtrNatIfRealMask The subnet Mask of the real subnet. For some devices/cases, it might represent the Real Highest IP Address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.11.2.5.1.1.5
rtrNatIfType NAT type. static - Translate a specific virtual IP network to a specific real IP network. TCP, UDP and ICMP sessions originated both in real and virtual networks will be translated. d…	Enumerationr/w Enumerated Values: 1 static 2 dynamic 3 pat 4 transparent	.1.3.6.1.4.1.164.11.2.5.1.1.6

Port Address Translation (PAT -  single IP NAT) configuration Table.

rtrPatEntry row .1.3.6.1.4.1.164.11.2.5.2.1

Each entry describe unique mapping between real IP address,
range of ports and protocol, to local (virtual) IP address.
Ports are used in the TCP (rfc793) to name the ends of logical
connections which carry long term c…

Indexes

rtrPatIdx

Column	Syntax	OID
rtrPatIdx Running index for PAT table.	Integer32 Constraints: range: 1-30	.1.3.6.1.4.1.164.11.2.5.2.1.1
rtrPatRealAddress The real IP Address used for translation	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.11.2.5.2.1.2
rtrPatVirtualAddress The virtual IP Address used for translation	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.11.2.5.2.1.3
rtrPatLowestPort Lowest Port number for this PAT entry	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.164.11.2.5.2.1.4
rtrPatHighestPort Highest Port number for this PAT entry	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.164.11.2.5.2.1.5
rtrPatProtocol Protocol selected. This Protocol and port range (lowest port - highest port) define the application (FTP, Telnet, SMTP etc.). Protocol enumaration numbers correspond to IP header 'protocol' field (e.g. 6 means TCP, 17 …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.2.5.2.1.6
rtrPatStatus This object enables creating and deleting entries of the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.11.2.5.2.1.7

This table traces the agent fatal error.

rtrInformationEntry row .1.3.6.1.4.1.164.11.3.1

This table has a single row entry and provides
Information related to the last reboot.

Indexes

rtrInformationId

Column	Syntax	OID
rtrInformationId rtrInformationId =1	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.11.3.1.1
rtrInformationProtMemAllocStatus Protocol Memory Allocation Alarm Status.	Enumeration Enumerated Values: 1 error 2 clearError 3 fatalError	.1.3.6.1.4.1.164.11.3.1.2
rtrInformationProtMemAllocInfo Protocol Memory Allocation Alarm additional information.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.164.11.3.1.3

The table of  FACS action.

rtrFACSActEntry row .1.3.6.1.4.1.164.11.5.2.1

Each rtrFACSActEntry consist of the following parameters

Indexes

rtrFACSActType rtrFACSActIfIndex

Column	Syntax	OID
rtrFACSActType This parameter indicates on which FACS Table the FACS action will preform.	Enumeration Enumerated Values: 1 tx 2 rx	.1.3.6.1.4.1.164.11.5.2.1.1
rtrFACSActIfIndex The interface to which this FACS entry is applicable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.5.2.1.2
rtrFACSAction The management station that sends a SET request for one of these actions with indexes rtrFACSType and rtrFACSIfIndex defines the type and the interface Id for which all FACS statements are to be erased. If no interfa…	Enumerationr/w Enumerated Values: 1 none 2 eraseIP 3 eraseDECnet 4 eraseIPX 5 eraseBrg 6 replaceIP 8 replaceIPX 9 replaceBrg 10 backupIP 12 backupIPX 13 backupBrg	.1.3.6.1.4.1.164.11.5.2.1.3
rtrFACSActiveDB This parameter will point on which Facs DataBase the SNMP agent read. The Active dataBase is Read Only. The user may change FACS statements in the temporary DataBase and then write it to the Active DB.	Enumerationr/w Enumerated Values: 1 active 2 temporary	.1.3.6.1.4.1.164.11.5.2.1.4

The table of  FACS statment.

rtrFACSEntry row .1.3.6.1.4.1.164.11.5.3.1

Each FACS statment consists of the following parameters

Indexes

rtrFACSIfIndex rtrFACSProtocolType rtrFACSType rtrFACSIndex

Column	Syntax	OID
rtrFACSIfIndex The interface to which this FACS entry is applicable. For applications this variables is always 0.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.5.3.1.1
rtrFACSProtocolType This parameter define the protocol the Security Access Control is applicable.	Enumeration Enumerated Values: 1 ip 2 ipx 3 dec 4 bridge	.1.3.6.1.4.1.164.11.5.3.1.2
rtrFACSType The Mode of in which this FACS statement operates. For applications this variable is always rx(2).	Enumeration Enumerated Values: 1 tx 2 rx 3 cod	.1.3.6.1.4.1.164.11.5.3.1.3
rtrFACSIndex Index to the FACS Table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.5.3.1.4
rtrFACSSrcAdd The size of the octet string will be according to the protocol type defined in rtrFACSProtocolType.	OctetStringr/w	.1.3.6.1.4.1.164.11.5.3.1.5
rtrFACSSrcAddMask Source-address mask .	OctetStringr/w	.1.3.6.1.4.1.164.11.5.3.1.6
rtrFACSDesAdd Destination-address The size of the octet string will be according to the protocol type define in rtrFACSProtocolType .	OctetStringr/w	.1.3.6.1.4.1.164.11.5.3.1.7
rtrFACSDesAddMask Destination-address mask .	OctetStringr/w	.1.3.6.1.4.1.164.11.5.3.1.8
rtrFACSOperation ... .	Enumerationr/w Enumerated Values: 1 block 2 forward 3 permit 4 deny 129 blockAndReport	.1.3.6.1.4.1.164.11.5.3.1.9
rtrFACSNetFiltering ... .	Enumerationr/w Enumerated Values: 1 none 2 l2multicast 3 arp 4 icmp 5 ip 6 udp 7 tcp 8 decnet 9 ipx	.1.3.6.1.4.1.164.11.5.3.1.10
rtrFACSSocketNum Port/socket number for different applications 0 is default meaning not applicable. none(1), ftp(21), telnet(23), smtp(25), tftp(69), snmp(161), snmpTrap(162), rip(520), sapIPX(1106), ripIPX(1107)	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.5.3.1.11
rtrFACSMask1Id Index into RND mask table FACS/COD Type) .	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.5.3.1.12
rtrFACSMask2Id Index into RND mask table FACS/COD according to the value of rtrFACSType .	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.5.3.1.13
rtrFACSStatus The status of a table entry.	Enumerationr/w Enumerated Values: 1 valid 2 createRequest 3 underCreation 4 invalid	.1.3.6.1.4.1.164.11.5.3.1.14

The table of  RTM entities.

rtrRtmEntityEntry row .1.3.6.1.4.1.164.11.6.1

Each entry represents an instance of the RTM entity.

Indexes

rtrRtmEntityAfiType rtrRtmEntitySafi

Column	Syntax	OID
rtrRtmEntityAfiType The AFI index of the rtrRtmEntityTable.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.164.11.6.1.1
rtrRtmEntitySafi The SAFI index of the rtrRtmEntityTable.	RtrSafi Type Values: 1 unicast 2 multicast 3 both 128 mplsBgpVpn	.1.3.6.1.4.1.164.11.6.1.2
rtrRtmEntityDsStatDf The default administrative distance used for statically defined routes in the static routes MIB table. It can be overridden for individual static routes. The lower the distance for a given route, the more likely that …	AdminDistancer/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.11.6.1.3
rtrRtmEntityDsOspfInt The administrative distance used for OSPF internal routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by RTM as the active route for the given destination.	AdminDistancer/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.11.6.1.4
rtrRtmEntityDsOspfExt The administrative distance used for OSPF Autonomous System external routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by RTM as the active route for the give…	AdminDistancer/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.11.6.1.5
rtrRtmEntityDsIntBgp The administrative distance used for internal and VPN BGP routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by RTM as the active route for the given destination.	AdminDistancer/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.11.6.1.6
rtrRtmEntityDsExtBgp The administrative distance used for external BGP routes. The lower the distance for a given type of route, the more likely a route of this type is to be used by RTM as the active route for the given destination.	AdminDistancer/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.11.6.1.7

Table of the bridge ports

rtrBridgePortConfigEntry row .1.3.6.1.4.1.164.11.7.1.1

Each entry defines a bridge port

Indexes

rtrBridgePortCIndex

Column	Syntax	OID
rtrBridgePortCIndex This is the index of the bridge port. It is the same as 'dot1dBasePort' of the Bridge MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.7.1.1.1
rtrBridgePortCIf The config ifIndex the bridge port is sitting on.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.7.1.1.2
rtrBridgePortCStatus The status of the RtrBridgePortConfigEntry. Creating and destroying the bridge port is done by this variable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.11.7.1.1.3

The Router's Configuration table.

rtrConfigEntry row .1.3.6.1.4.1.164.11.9.1.1

An entry in the Router's Configuration table.

Indexes

rtrConfigIndex

Column	Syntax	OID
rtrConfigIndex This object indicates the Router's Index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.9.1.1.1
rtrConfigDefaultGateway Router Default Gateway.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.11.9.1.1.2
rtrConfigArpAgingTime ARP Aging Time.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.9.1.1.3
rtrConfigClassifierTosMask This object indicates the Classifier's TOS Mask, as follows: 0x1C for DTR -- rfc795 0x1E for Cisco 0xE0 for Precedence -- rfc795 0xFC for Diffserv Else for Manual .	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.9.1.1.5
rtrConfigRIPMode This object determines the Router Information Protocol to measure the shortest path between 2 positions on the network.	Enumerationr/w Enumerated Values: 1 notApplicable 2 rip1 3 rip2 4 rip1And2	.1.3.6.1.4.1.164.11.9.1.1.6
rtrConfigRoutingName The unique name given to a specific virtual Router instance.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.164.11.9.1.1.7
rtrConfigRowStatus This object enables creating and deleting rows in table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.11.9.1.1.8
rtrConfigDhcpClientOpHostNameType DHCP Host Name type according to option 12 This parameters holds the type of the name. (the name itself is set in dhcpClientOpHostName). 0 - user-configured identifier 1 - sysName	Enumerationr/w Enumerated Values: 0 userId 1 sysName	.1.3.6.1.4.1.164.11.9.1.1.9
rtrConfigDhcpClientOpHostName The DHCP Host Name. Name should include at least 1 character.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.11.9.1.1.10
rtrConfigDhcpClientOpVendorClassIdType DHCP Vendor ClassId type This parameters holds the type of the name. (the name itself is set in dhcpClientOpVendorClassId). 0 - user-configured identifier 1 - entPhysicalName .	Enumerationr/w Enumerated Values: 0 userId 1 entPhysicalName	.1.3.6.1.4.1.164.11.9.1.1.11
rtrConfigDhcpClientOpVendorClassId The Vendor Class Identifier. Identifier should include at least 1 character.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.11.9.1.1.12
rtrConfigDhcpClientOpControl The Administrative Status of the different options. Bit=1 means that respective option is enabled/activated.	Bitsr/w Enumerated Values: 0 vendorClassId 1 hostName	.1.3.6.1.4.1.164.11.9.1.1.13
rtrConfigClearIpv4ArpCmd Clear action to be performed on IPv4 ARP Table associate to the Router.	Enumerationr/w Enumerated Values: 2 off 3 on	.1.3.6.1.4.1.164.11.9.1.1.14
rtrConfigClearIpv6NeighborCmd Clear action to be performed on IPv6 Neighbor Table associate to the Router.	Enumerationr/w Enumerated Values: 2 off 3 on	.1.3.6.1.4.1.164.11.9.1.1.15
rtrConfigRouterDscp The DSCP value of any packet generated in the related Router Entity. Router Entity traffic includes control protocols.	Unsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.164.11.9.1.1.16

The Router's Forwarding Table.

rtrFwdEntry row .1.3.6.1.4.1.164.11.9.3.1

An entry in the Router's Forwarding table.

Indexes

rtrFwdIdx rtrFwdIpAddress rtrFwdIpMask rtrFwdRuleIdx

Column	Syntax	OID
rtrFwdIdx This object indicates the Router Index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.9.3.1.1
rtrFwdIpAddress This object indicates the Destination IP Address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.164.11.9.3.1.2
rtrFwdIpMask This object indicates the Mask IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.164.11.9.3.1.3
rtrFwdRuleIdx This object indicates the Rule's Number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.9.3.1.4
rtrFwdRowStatus This object enables the user to create/delete entries in this table. Entry of Type rtrFwdType = staticRouting(3) are created by the user. Only this type of entries can be deleted by the user. …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.11.9.3.1.5
rtrFwdNextHop This object indicates the IP Address of the Next Hop.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.11.9.3.1.6
rtrFwdIfIndex This object indicates the Interface Index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.9.3.1.7
rtrFwdType The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Routes …	Enumerationr/w Enumerated Values: 1 other 2 reject 3 local 4 remote	.1.3.6.1.4.1.164.11.9.3.1.8
rtrFwdProto The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.	Enumeration Enumerated Values: 1 other 2 local 3 netmgmt 8 rip 41 lis	.1.3.6.1.4.1.164.11.9.3.1.9
rtrFwdEthQueue This object indicates the ETH Queue number.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.9.3.1.10
rtrFwdMetric1 The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtrFwdProto value. If this metric is not used, its value should be set to -1.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.9.3.1.11

The Router's Forwarding Table.

rtrPbrEntry row .1.3.6.1.4.1.164.11.9.4.1

An entry in the Router's Policy Based Routing (PBR) table.

Indexes

rtrPbrIdx rtrPbrInterface rtrPbrRuleIdx

Column	Syntax	OID
rtrPbrIdx This object indicates the Router Index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.11.9.4.1.1
rtrPbrInterface Router interface for which this match-set rule applies.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.164.11.9.4.1.2
rtrPbrRuleIdx This object indicates the Policy Based Routing (PBR) match-set rule index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.11.9.4.1.3
rtrPbrRowStatus This object enables the user to create/delete entries of this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.11.9.4.1.4
rtrPbrMatchAllFrames Forwarding decision is made regardless PBR Rule (as if all conditions are matched)	Enumerationr/w Enumerated Values: 1 notApplicable 2 no 3 yes	.1.3.6.1.4.1.164.11.9.4.1.5
rtrPbrSourceIpAddress Received frame source IP Address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.11.9.4.1.6
rtrPbrSourceIpMask The subnet mask of the source IP Address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.11.9.4.1.7
rtrPbrDestIpAddress Received frame destination IP Address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.11.9.4.1.8
rtrPbrDestIpMask The subnet mask of the destination IP Address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.11.9.4.1.9
rtrPbrIpProtocol Value of Protocol field in IP Frame header.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.11.9.4.1.10
rtrPbrMinFrameLength .	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.11.9.4.1.11
rtrPbrMaxFrameLength .	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.11.9.4.1.12
rtrPbrDiscardFrame Discard a frame when rule is matched .	Enumerationr/w Enumerated Values: 1 notApplicable 2 no 3 yes	.1.3.6.1.4.1.164.11.9.4.1.13
rtrPbrForwardingInterface The router Interface through which the frame should be forwarded, when rule is matched. If there's no forwarding interface, then this object has a value of zero	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.164.11.9.4.1.14
rtrPbrNextHop IP Address of Next Hop, when Forwarding Interface is LAN, or has BridgePDU (BVI) encapsulation.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.11.9.4.1.15

The Source Address Table.

rtrSourceAddressEntry row .1.3.6.1.4.1.164.11.9.6.1

An entry in the Source Address Table.

Indexes

rtrSourceAddressApp rtrSourceAddressType rtrSourceAddress rtrSourceAddressIfIndex

Column	Syntax	OID
rtrSourceAddressApp This object indicates the Application Type.	Enumeration Enumerated Values: 1 other 2 trap 3 loopback 4 clock 255 managementAll	.1.3.6.1.4.1.164.11.9.6.1.1
rtrSourceAddressType This object indicates the Address Type. Value of 'unknown(0)' means that address is irrelevant.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.164.11.9.6.1.2
rtrSourceAddress This object indicates the Address. Value of '0' means that address is irrelevant.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.164.11.9.6.1.3
rtrSourceAddressIfIndex This object indicates the ifIndex of the Interface, whose address will be used. Value of '0' means that ifIndex is irrelevant.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.11.9.6.1.4
rtrSourceAddressRowStatus This object enables the user to create/delete entries in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.11.9.6.1.5

The table of rtr redistribution information entries.
This table is used to determine how routing information is
redistributed to routing protocol managers (RPMs) using rtr's
Routing Protocol Input interface.  The RPM to which the information
may be redistributed is called the destination RPM.  Routing
information is received from RPMs and from the MIB (for static
routes); these are referred to as the routing information source.

rtrRedistEntry row .1.3.6.1.4.1.164.11.9.7.1

Information defining how routing information is redistributed
to routing protocol managers (RPMs)by rtr on its Routing
Protocol Input interface.

There are two key aspects to an entry in this table.
…

Indexes

rtrRedistAfiType rtrRedistSafi rtrRedistInfoSrc rtrRedistInfoDest

Column	Syntax	OID
rtrRedistAfiType The AFI index into the rtr redistribute table.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.164.11.9.7.1.1
rtrRedistSafi The SAFI index into the rtr redistribute table.	RtrSafi Type Values: 1 unicast 2 multicast 3 both 128 mplsBgpVpn	.1.3.6.1.4.1.164.11.9.7.1.2
rtrRedistInfoSrc The source of the routing information. This is one of: - an RPM, joined to rtr on the Routing Protocol Input interface - statically defined routes, defined in the static routes table - connected routes, learnt…	InfoSourceDest Type Values: 0 infoSourceAll 1 infoSourceAllInclConnected 65536 infoSourceOther 131072 infoSourceConnected 196608 infoSourceStatic 262144 infoSourceIcmp 327680 infoSourceEgp 393216 infoSourceGgp 458752 infoSourceHello 524288 infoSourceRip 589824 infoSourceIsis 655360 infoSourceEsis 720896 infoSourceIgrp 786432 infoSourceBbnSpfIgp 851968 infoSourceOspf 917504 infoSourceBgp 983040 infoSourceIdpr 1048576 infoSourceEigrp 1114112 infoSourceDvmrp 1179648 infoSourceDdrp	.1.3.6.1.4.1.164.11.9.7.1.3
rtrRedistInfoDest The destination of the routing information. This is usually an RPM, joined to rtr on the Routing Protocol Input interface. It can also be set to 'all', meaning that this entry applies to all routing information destin…	InfoSourceDest Type Values: 0 infoSourceAll 1 infoSourceAllInclConnected 65536 infoSourceOther 131072 infoSourceConnected 196608 infoSourceStatic 262144 infoSourceIcmp 327680 infoSourceEgp 393216 infoSourceGgp 458752 infoSourceHello 524288 infoSourceRip 589824 infoSourceIsis 655360 infoSourceEsis 720896 infoSourceIgrp 786432 infoSourceBbnSpfIgp 851968 infoSourceOspf 917504 infoSourceBgp 983040 infoSourceIdpr 1048576 infoSourceEigrp 1114112 infoSourceDvmrp 1179648 infoSourceDdrp	.1.3.6.1.4.1.164.11.9.7.1.4
rtrRedistRowStatus Used to create and delete a rtr redistribution table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.11.9.7.1.5

Router Policy Configuration Table.

rtrPolicyMainEntry row .1.3.6.1.4.1.164.11.13.1.1

An entry in the Router Policy main table

Indexes

rtrPolicyName

Column	Syntax	OID
rtrPolicyName Router Policy profile name	OctetString Constraints: range: 1-80	.1.3.6.1.4.1.164.11.13.1.1.1
rtrPolicyNumberOfRules Number of policy rule entries in this policy profile	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.11.13.1.1.2
rtrPolicyLastSeqeunceNumber Sequence Number of the last Rule in this policy profile.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.11.13.1.1.3
rtrPolicyResequenceCmd Resequence Command, specifying step between policy rule sequence numbers. For example, when resequence command with value of 100 is given, new sequence number will be 100 200 300 400 etc. Default Value - 10. Possible S…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.11.13.1.1.4
rtrPolicyType Router Policy profile type.	Enumerationr/w Enumerated Values: 2 bgpPrefixListIpv4 3 bgpPrefixListIpv6 4 bgpRouteMap	.1.3.6.1.4.1.164.11.13.1.1.5
rtrPolicyRowStatus Create/Destroy Router Policy profile. When removing policy profile which has associated policy rule entries, all associated entries (in rtrPolicyRuleTable and in all auxiliary (per protocol) tables) MUST be removed be…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.11.13.1.1.6

Router policy rule Table

rtrPolicyRuleEntry row .1.3.6.1.4.1.164.11.13.2.1

Policy rule entry - general policy rule parameters , and pointer to
Auxillary table.

Indexes

rtrPolicyRuleIdx

Column	Syntax	OID
rtrPolicyRuleIdx Policy rule running Index .	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.11.13.2.1.1
rtrPolicyRuleName The name of the policy profile to which this policy rule belongs. Policy profile Name MUST exists in rtrPolicyMainTable. Upon deletion of an policy profile, all entries with deleted policy profile Name must be deleted.	OctetStringr/w Constraints: range: 1-252	.1.3.6.1.4.1.164.11.13.2.1.2
rtrPolicyRuleSequenceNumber Policy rule Sequence Number	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.11.13.2.1.3
rtrPolicyRuleType This object specify policy rule type: Remark, Deny or Permit. Remark type policy rule must include pointer (rtrPolicyRulePointer) to rtrPolicyRuleRemarkTable Permit or Deny type policy rule must include pointer to one …	Enumerationr/w Enumerated Values: 1 remark 2 deny 3 permit	.1.3.6.1.4.1.164.11.13.2.1.4
rtrPolicyRulePointer Pointer to entry in one of the auxilary tables: bgp route map table. When an entry is created in this table, Agent must create associated entry in one of the auxilary accroding to this pointer	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.164.11.13.2.1.5
rtrPolicyRuleRowStatus Create or Destroy router policy rule	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.11.13.2.1.6

Inverse table for Policy Rule Table.
This table is used for displaying policy rules ordered according their
sequence number.

rtrPolicyInvRuleEntry row .1.3.6.1.4.1.164.11.13.3.1

Policy Rule Table inverse entry - general Policy Rule parameters,
indexed by policy profile Name and Sequence Number, used for display
sorted according to sequence number purpose.

Indexes

rtrPolicyName rtrPolicyRuleSequenceNumber

Column	Syntax	OID
rtrPolicyInvRuleIdx Policy Rule running Index .	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.11.13.3.1.1
rtrPolicyInvRuleType This object specify policy rule type: Remark, Deny or Permit. Remark type policy rule must include pointer (rtrPolicyRulePointer) to rtrPolicyRuleRemarkTable Permit or Deny type policy rule must include pointer to one …	Enumeration Enumerated Values: 1 remark 2 deny 3 permit	.1.3.6.1.4.1.164.11.13.3.1.2
rtrPolicyInvRulePointer Pointer to entry in one of the auxilary tables: bgp route map table.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.164.11.13.3.1.3

Policy Rules remark Table.
This table containing all remarks (free text which may describe
Policy Rules) for all Policy Profiles

rtrPolicyRuleRemarkEntry row .1.3.6.1.4.1.164.11.13.4.1

Policy Rules remarks

Indexes

rtrPolicyRuleIdx

Column	Syntax	OID
rtrPolicyRuleRemark Free text describing following Policy Rules	OctetStringr/w Constraints: range: 1-252	.1.3.6.1.4.1.164.11.13.4.1.1

DHCP Relay Server Table.

dhcpRelayServerEntry row .1.3.6.1.4.1.164.11.15.1.2.1

An entry in the DHCP Relay Server Table.

Indexes

dhcpRelayServerRtrIfIndex dhcpRelayServerAddrType dhcpRelayServerAddr

Column	Syntax	OID
dhcpRelayServerRtrIfIndex The ifIndex of the Router Interface to which the DHCP Relay Server is associated. Value of 0x00000001 represents a server definition per router entity, serving all router interfaces.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.164.11.15.1.2.1.1
dhcpRelayServerAddrType The address type of IP Address associated to the DHCP Relay Server.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.164.11.15.1.2.1.2
dhcpRelayServerAddr The IP address associated to the DHCP Relay Server.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.164.11.15.1.2.1.3
dhcpRelayServerRowStatus This object enables the user to create/delete entries of this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.11.15.1.2.1.4

Router entity RIB (Routing Information Base) table.

rtrRibEntry row .1.3.6.1.4.1.164.11.16.1.1

Route entry in Router entity RIB table.

Indexes

rtrRibDestType rtrRibDest rtrRibDestLen rtrRibTos rtrRibNextHopType rtrRibNextHop rtrRibIfIndex rtrRibProto rtrRibRpmIndex

Column	Syntax	OID
rtrRibDestType The type of the address used as the destination IP address for this route.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.164.11.16.1.1.1
rtrRibDest Destination internetwork address or subnet address. The destination prefix length is applied to this value, and to a particular destination address, to determine whether the route applies to the particular address. …	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.164.11.16.1.1.2
rtrRibDestLen Prefix length (in bits) to apply to the rtmRibDest object, to obtain the set of addresses to which this route applies. If the prefix length is L, then applying the length to an address means taking the fi…	Integer32 Constraints: range: 0-128	.1.3.6.1.4.1.164.11.16.1.1.3
rtrRibTos The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +=====+=====+=====+=====+…	Integer32 Constraints: range: 0-15	.1.3.6.1.4.1.164.11.16.1.1.4
rtrRibNextHopType The type of the address used as the next-hop address for this route.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.164.11.16.1.1.5
rtrRibNextHop On remote routes, the address of the next system en route; Otherwise, zero.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.164.11.16.1.1.6
rtrRibIfIndex The ifIndex value which identifies the local interface through which the next hop of this route should be reached.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.164.11.16.1.1.7
rtrRibProto The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.	IANA-RTPROTO-MIBIANAipRouteProtocol Type Values: 1 other 2 local 3 netmgmt 4 icmp 5 egp 6 ggp 7 hello 8 rip 9 isIs 10 esIs 11 ciscoIgrp 12 bbnSpfIgp 13 ospf 14 bgp 15 idpr 16 ciscoEigrp 17 dvmrp 18 rpl 19 dhcp 20 ttdp	.1.3.6.1.4.1.164.11.16.1.1.8
rtrRibRpmIndex The HAF entity index for the RPM that supplied this route, or zero for static routes or automatically configured routes. This is used to distinguish routes in the system where multiple copies of a given protocol (for ex…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.164.11.16.1.1.9
rtrRibMetric1 The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRibProto value. If this metric is not used, its value is returned as -1.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.11.16.1.1.10
rtrRibFibRoute Flag indicating whether or not this route has been programmed either to a forwarding table, or to a partner that queries route information (such as BGP or PIM). If there is no forwarding table and no part…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.164.11.16.1.1.11