RAD-SSFP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
9

smartSfpTable

table
.1.3.6.1.4.1.164.40.2.1 · 1 row entry · 9 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk smartSfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-SSFP-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-SSFP-MIB::smartSfpTable' 
A table that contains configuration for Smart SFP 
e.g. MiRIC or MiTOP
smartSfpEntry row .1.3.6.1.4.1.164.40.2.1.1
An entry in table.
Indexes
Column Syntax OID
smartSfpSlotIdx
The Slot number used as first index.
If there is not slot like in standalone device,
then the value of smartSfpSlotIdx shall be notApplicable(255).
RAD-TCSlotType
Type Values:
1psA
2psB
3clA
4clB
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
20psC
21fan
22ve
101kmxPsA
102kmxPsB
103kmxMlA
104kmxMlB
105kmxCl
106kmxOpt
107kmxIO1
108kmxIO2
109kmxIO3
110kmxIO4
111kmxIO5
112kmxIO6
113kmxIO7
114kmxIO8
115kmxIO9
116kmxIO10
117kmxIO11
118kmxIO12
125io1Ve
126io2Ve
127io3Ve
128io4Ve
129io5Ve
130io6Ve
131io7Ve
132io8Ve
133io9Ve
134io10Ve
135io11Ve
136io12Ve
137io13Ve
138io14Ve
139io15Ve
255notApplicable
 .1.3.6.1.4.1.164.40.2.1.1.1
smartSfpPortIdx
The port number used as second index.
The first index (mdlCSlotIdx) is defined in
mdlCEntry. If there is not slot like in standalone device,
then the value of mdlCSlotIdx shall be notApplicable(255).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.40.2.1.1.2
smartSfpRowStatus
This object enable the user to create/delete entries in this table.
When the smartSfpType is notApplicable(1) the value of this object
shall be notInService(2).
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.164.40.2.1.1.3
smartSfpType
The configured smart SFP type. The value notApplicable(1) is used by the
device upon row creation. This value cannot be set.
SmartSfpModuleTyper/w
Type Values:
1notApplicable
2miRIC-E1
3miRIC-T1
4miRIC-E3
5miRIC-T3
6miRICi-E1
7miRICi-T1
8miRICi-E3
9miRICi-T3
10miRICi-155
11miRICi-622
12miTOP-E1
13miTOP-E3
14miTOP-T1
15miTOP-T3
16sfp-VDSL-2W
 .1.3.6.1.4.1.164.40.2.1.1.4
smartSfpAdminStatusdeprecated
This object indicates the Administrative Status of the Smart SFP.
This object was deprecated. Use smartSfpRowStatus instead.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.164.40.2.1.1.5
smartSfpOperState
The current operational state of the Smart SFP
onLine - Indicates that the smartSfpRowStatus is up and the
correct smart SFP is installed.
offLine - Indicates that the smart SFP is installed while its
smartS…
Enumeration
Enumerated Values:
1onLine
2offLine
3notInstalled
4mismatch
 .1.3.6.1.4.1.164.40.2.1.1.6
smartSfpResetCmd
Reset action to be performed on the smart SFP.
Agent should set smarSfpResetCmd to off (2) during initialization.
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.40.2.1.1.7
smartSfpInstall
This attribute indicates the installed smart SFP
(as opposed to the configured smartSfpType).
SmartSfpModuleType
Type Values:
1notApplicable
2miRIC-E1
3miRIC-T1
4miRIC-E3
5miRIC-T3
6miRICi-E1
7miRICi-T1
8miRICi-E3
9miRICi-T3
10miRICi-155
11miRICi-622
12miTOP-E1
13miTOP-E3
14miTOP-T1
15miTOP-T3
16sfp-VDSL-2W
 .1.3.6.1.4.1.164.40.2.1.1.8
smartSfpPhysicalIndex
The object contains index of the related entPhysicalEntry of the
ENTITY-MIB, see RFC4133. It points the relevant port and not the
port slot. The agent should build this index according to the rules
that are defined by t…
ENTITY-MIBPhysicalIndexOrZero
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.164.40.2.1.1.9