Net-SNMP examples using the rad MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'RAD-RadShdsl-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RAD-RadShdsl-MIB::shdslIf'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-RadShdsl-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-RadShdsl-MIB::shdslIf'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (43)
.1.3.6.1.4.1.164.3.1.6.12
.1.3.6.1.4.1.164.3.1.6.12.0
.1.3.6.1.4.1.164.3.1.6.12.1
.1.3.6.1.4.1.164.3.1.6.12.1.1
.1.3.6.1.4.1.164.3.1.6.12.1.1.1
.1.3.6.1.4.1.164.3.1.6.12.1.1.2
.1.3.6.1.4.1.164.3.1.6.12.1.1.3
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.1.1.4
Bits
.1.3.6.1.4.1.164.3.1.6.12.1.1.5
.1.3.6.1.4.1.164.3.1.6.12.1.1.6
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.1.1.7
.1.3.6.1.4.1.164.3.1.6.12.1.1.8
.1.3.6.1.4.1.164.3.1.6.12.1.1.9
.1.3.6.1.4.1.164.3.1.6.12.2
.1.3.6.1.4.1.164.3.1.6.12.2.1
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.2.1.1
.1.3.6.1.4.1.164.3.1.6.12.3
.1.3.6.1.4.1.164.3.1.6.12.3.1
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.3.1.1
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.3.1.2
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.3.1.3
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.3.1.4
.1.3.6.1.4.1.164.3.1.6.12.4
.1.3.6.1.4.1.164.3.1.6.12.4.1
.1.3.6.1.4.1.164.3.1.6.12.4.1.1
Integer32
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.1
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.10
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.11
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.12
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.13
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.14
OctetString
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.15
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.16
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.17
Bits
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.19
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.2
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.3
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.4
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.5
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.6
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.7
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.8
Enumeration
.1.3.6.1.4.1.164.3.1.6.12.4.1.1.9
Dependencies (18) 5 direct · 13 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Notifications / Traps (6)
NameOIDDescription
alarmSeverity (unresolved reference) alarmState (unresolved reference) IF-MIBifAlias
.1.3.6.1.4.1.164.3.1.6.12.0.1
This notification indicates that a remote loopback
has been activated on the Embedded Operations Channel (EOC) of the SHDSL
link.
.1.3.6.1.4.1.164.3.1.6.12.0.13
This trap indicates Loss of sync word (LOSW) .
.1.3.6.1.4.1.164.3.1.6.12.0.15
This trap indicates Excessive Crc Error.
.1.3.6.1.4.1.164.3.1.6.12.0.19
This trap indicates that Loop attenuation has exceeded the threshold.
.1.3.6.1.4.1.164.3.1.6.12.0.20
This trap indicates Signal-to-noise ratio (SNR) margin is below the threshold.
.1.3.6.1.4.1.164.3.1.6.12.0.23
This trap indicates that the Link is down.