RAD-Pw-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
15
Rows
15
Columns
93

pwGenTable

table
.1.3.6.1.4.1.164.14.1.1.1 · 1 row entry · 25 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwGenTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-Pw-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-Pw-MIB::pwGenTable' 
This table contains general configuration for PW connection.
pwGenEntry row .1.3.6.1.4.1.164.14.1.1.1.1
This table is indexed by pwIdx, the value of which is equal
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MIB)- the pwIndex.
An entry is created in this table by the agent fo…
Indexes
Column Syntax OID
pwIdx
Index of this table.
The value for this object is equal to the value
of pwIndex from the pwTable of PW-STD-MIB
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.1.1.1.1
pwGenPeerIdx
This object indicates the Index of the Peer
(as it is defined in the Peer Table), which terminated this PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.1.1.1.2
pwGenAttachmentCircuit
This is a unique index within the ifTable. It represents
the attached circuit interface (e.g ATM VC, HDLC) attached to
this PW connection (from service initiator side).

A value of zero indicates an inte…
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.164.14.1.1.1.1.3
pwGenOutgoingInterface
This is a unique index within the ifTable. It represents
the outgoing interface (towards the PSN ) attached to
this PW connection.

This object is applicable only when the forwarding is done at
layer 2 i.e…
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.164.14.1.1.1.1.4
pwGenOamMode
This objects defines whether OAM will be enabled on this PW.
notApplicable(1) value will be used when
PW type does not support OAM.
Enumerationr/w
Enumerated Values:
1notApplicable
2disabled
3enabled
 .1.3.6.1.4.1.164.14.1.1.1.1.5
pwGenOamType
This objects defines the failure detection mechanism used
on this PW.
BFD - Bidirectional Forwarding Detection
notApplicable(1) value will be used when
pwGenOamMode is notApplicable.
Enumerationr/w
Enumerated Values:
1notApplicable
2propietary
3bfd
 .1.3.6.1.4.1.164.14.1.1.1.1.6
pwGenSequenceNumberField
This object defines whether processing of Sequence Number field
(ATM cell encapsulation) will be done by device, on this PW.
Enumerationr/w
Enumerated Values:
1notApplicable
2disabled
3enabled
 .1.3.6.1.4.1.164.14.1.1.1.1.7
pwGenNextHopType
Indicates address type of the Next Hop.
Not applicable for device with router.
Enumerationr/w
Enumerated Values:
1notApplicable
2atmVc
3bridgePort
4ipV4
 .1.3.6.1.4.1.164.14.1.1.1.1.8
pwGenNextHop
Not applicable (=0) when pwMplsEgressTunnelNextHopType=notApplicable.
When applicable, represents ATM VC, Bridge Port,
according to pwMplsEgressTunnelNextHopType.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.1.1.1.9
pwGenIpNextHop
This object defines local Next Hop IP Address for this PW.
0.0.0.0 - means - not applicable.
This object is applicable only when pwGenNextHopType=ipV4
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.14.1.1.1.1.10
pwGenMacNextHop
This object defines local Next Hop MAC Address for this PW.
0:0:0:0:0:0 - means - not applicable.
This object is applicable only when pwGenNextHopType=bridgePort
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.164.14.1.1.1.1.11
pwGenEnableVlanTag
This object enables or disables a VLAN tag on
every transmitted packet via this PW connection
Enumerationr/w
Enumerated Values:
1notApplicable
2disabled
3enabled
 .1.3.6.1.4.1.164.14.1.1.1.1.12
pwGenVlanId
This object indicates the VLAN ID tag attached
to every transmitted packet via this PW connection.
This entry is applicable only if pwGenEnableVlanTag=enabled(3).
Unsigned32r/w
Constraints:
range: 1-4095
 .1.3.6.1.4.1.164.14.1.1.1.1.13
pwGenVlanPriority
This object indicates the VLAN priority assigned
to every transmitted packet via this PW connection.
This entry is applicable only if pwGenEnableVlanTag=enabled(3)
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.164.14.1.1.1.1.14
pwGenIpTos
This object indicates TOS field value
for PW having pwPsnType= ip(3)
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.1.1.1.15
pwGenSourceUdpPort
This object indicates source UDP port (1...65535) value
for pw having pwPsnType= ip (3)
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.1.1.1.16
pwGenSubType
This object indicates the PW Sub Type
(i.e. Sub Type of 'pwType' from 'pwTable').

For ACE-3000 devices:
It is applicable only when pwType = basicCesPsn(21).
Enumerationr/w
Enumerated Values:
1notApplicable
2clockRecovery
3clockDistribution
4data
 .1.3.6.1.4.1.164.14.1.1.1.1.17
pwGenSourceIpAddress
Source IP Address per PW
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.14.1.1.1.1.18
pwGenSourceIpMask
Source IP Mask per PW
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.164.14.1.1.1.1.19
pwGenUdpMuxMethod
This objects defines the method in which the UDP header is used
to multiplex between different PWs, as follows:

sourcePort - validate the destination port value
and perform internal routing according to t…
Enumerationr/w
Enumerated Values:
1notApplicable
2sourcePort
3destinationPort
 .1.3.6.1.4.1.164.14.1.1.1.1.21
pwGenOamStatus
This objects indicates the status of the PW OAM:
disabled - the PW is shutdown and/or OAM is disabled for the PW.
connected - OAM is enabled and is synchronized with the peer
device.
failure - OAM not synchr…
Enumeration
Enumerated Values:
1notApplicable
2disabled
3connected
4failure
5validationFail
 .1.3.6.1.4.1.164.14.1.1.1.1.23
pwGenMismatchReason
This object details the PW configuration mismatch.
Enumeration
Enumerated Values:
1tdmoipFrameFormat
2tdmoipVersion
3receivedEthernetFrame
4receivedFrameLength
2147483647other
 .1.3.6.1.4.1.164.14.1.1.1.1.24
pwGenOamDelayThreshold
This objects defines a Delay Threshold in microseconds
when this value is exceeded an event is sent. (used as rising threshold)
Rising threshold range of values is between 1-180 msec,
default value is 180msec.
microsecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.1.1.1.27
pwGencasFramesPerPacket
This objects defines the Frames Per Packet:
4 - E1/T1 frames per packet, packetization delay of 0.5 m.s.
8 - E1/T1 frames per packet, packetization delay of 1 m.s.
12 - T1 frames per packet, packetization delay of …
Unsigned32r/w
Constraints:
range: 48-48
range: 64-64
range: 56-56
range: 40-40
range: 32-32
range: 24-24
range: 16-16
range: 12-12
range: 1-8
 .1.3.6.1.4.1.164.14.1.1.1.1.28
pwGenOamDelayThresholdFalling
This objects defines a PW OAM Delay falling Threshold
in microseconds units. When delay reach below this value, event is cleared.
Falling threshold range of values is between 1-180 msec,
default value is 180msec.
Fallin…
microsecondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.1.1.1.29

pwGenLabelTable

table
.1.3.6.1.4.1.164.14.1.1.5 · 1 row entry · 4 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwGenLabelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-Pw-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-Pw-MIB::pwGenLabelTable' 
This table defines supported range of PW labels.
pwGenLabelEntry row .1.3.6.1.4.1.164.14.1.1.5.1
Entry in this table defines range of PW labels in the direction and type
indicated by pwGenLabelType and pwGenLabelDirection.
Indexes
Column Syntax OID
pwGenLabelType
This object defines type of label.
Enumeration
Enumerated Values:
2static
3dynamic
 .1.3.6.1.4.1.164.14.1.1.5.1.1
pwGenLabelDirection
This object defines PW direction.
Enumeration
Enumerated Values:
2ingress
3egress
 .1.3.6.1.4.1.164.14.1.1.5.1.2
pwGenLabelMinValue
This object defines minimum value of PW labels,
in the direction and type indicated by
pwGenLabelType and pwGenLabelDirection.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.1.5.1.3
pwGenLabelMaxValue
This object define maximum value of PW labels,
in the direction and type indicated by
pwGenLabelType and pwGenLabelDirection.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.1.5.1.4

peerTable

table
.1.3.6.1.4.1.164.14.1.1.6 · 1 row entry · 12 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk peerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-Pw-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-Pw-MIB::peerTable' 
The Peer Table
peerEntry row .1.3.6.1.4.1.164.14.1.1.6.1
An entry in this table.
Indexes
Column Syntax OID
peerIndex
This object represents the Peer Index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.1.6.1.1
peerRowStatus
This object is used for creating, modifying and deleting
a row of this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.164.14.1.1.6.1.2
peerAddressType
This object represents the Address Type of the Peer node.
It should be set to 'unknown' if PE/PW maintenance protocol
is not used and the address is unknown.

The peer address can be an IP address or a MAC…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.164.14.1.1.6.1.3
peerAddress
This object represents the Peer node Address.
of the PW/PE maintenance protocol entity.
This object SHOULD contain a value of all zeroes if not applicable
(peerAddrType is 'unknown').
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.14.1.1.6.1.4
peerName
This object represents the Peer Name.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.14.1.1.6.1.5
peerNoOfUsages
This object indicates the number of times this Peer is used
(by PWs, Egress LSP Tunnels etc).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.1.6.1.6
peerTargeted
This object indicates whether the Peer is configured
as a Targeted Peer or not.
Enumerationr/w
Enumerated Values:
1notApplicable
2no
3yes
 .1.3.6.1.4.1.164.14.1.1.6.1.7
peerNextHopAddressType
This object represents the Address Type of the Peer Next Hop node.
It should be set to 'unknown' if the address is unknown.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.164.14.1.1.6.1.8
peerNextHopAddress
This object represents the Peer Next Hop node Address.
This object SHOULD contain a value of all zeroes if not applicable
(peerAddrType is 'unknown').
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.14.1.1.6.1.9
peerAddressClass
This object defines if the Peer address is given as an IP address
or a MAC address.
The value of peerAddressClass indicates whether the relevant
objects are peerAddressType+peerAddress or peerMacAddress.
Enumerationr/w
Enumerated Values:
2ip
3mac
 .1.3.6.1.4.1.164.14.1.1.6.1.10
peerMacAddress
This object defines the address of the peer node when layer 2
forwarding is used (MEF8)
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.164.14.1.1.6.1.11
peerRouterInstance
This object defines the instance of the routing domain that this peer belongs to.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.1.6.1.12

pwMplsCfgTable

table
.1.3.6.1.4.1.164.14.1.2.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwMplsCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-Pw-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-Pw-MIB::pwMplsCfgTable' 
This table contains MPLS PSN related configuration for 
PW connection.
pwMplsCfgEntry row .1.3.6.1.4.1.164.14.1.2.1.1.1
This table is indexed by pwIdx, the value of which is equal
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MIB)- the pwIndex.
An entry is created in this table by the agent f…
Indexes
Column Syntax OID
pwMplsCfgIngressTunnel
This object points to an entry of pwMplsIngressTunnelTable.
Its value is equal to pwMplsIngressTunnelIndex
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.2.1.1.1.1
pwMplsCfgEgressTunnel
This object points to an entry of pwMplsEgressTunnelTable.
Its value is equal to pwMplsEgressTunnelIndex.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.2.1.1.1.2

pwTDMoIpTable

table
.1.3.6.1.4.1.164.14.1.3.1.1 · 1 row entry · 1 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwTDMoIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-Pw-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-Pw-MIB::pwTDMoIpTable' 
This table contains TDMoIP Service  related configuration for 
PW connection.
pwTDMoIpEntry row .1.3.6.1.4.1.164.14.1.3.1.1.1
This table is indexed by pwIdx, the value of which is equal
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MIB)- the pwIndex.

An entry is created in this table b…
Indexes
Column Syntax OID
pwTDMoIpCfgIndex
Index to TDMoIP table below. Multiple TDMoIP PWs
MAY share a single pwTDMoIpCfgEntry
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.3.1.1.1.1

pwTDMoIpCfgTable

table
.1.3.6.1.4.1.164.14.1.3.1.3 · 1 row entry · 6 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwTDMoIpCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-Pw-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-Pw-MIB::pwTDMoIpCfgTable' 
This table contains TDM over IP service configuration 
for PW connection.
pwTDMoIpCfgEntry row .1.3.6.1.4.1.164.14.1.3.1.3.1
This table is indexed by pwIdx, the value of which is equal
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MIB)- the pwIndex.

An entry is created in this table b…
Indexes
Column Syntax OID
pwTDMoIpCfgTableIndex
Index to an entry in this table
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.3.1.3.1.1
pwTDMoIpCfgRowStatus
Object used for creating, modifying, and deleting
a row of this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.164.14.1.3.1.3.1.2
pwTDMoIpCfgPayloadFormat
determine TDM over IP proprietary
payload format.
Enumerationr/w
Enumerated Values:
1notApplicable
2v1
3v2
 .1.3.6.1.4.1.164.14.1.3.1.3.1.3
pwTDMoIpCfgFarEndType
Determines TDM over IP Far End type.
Enumerationr/w
Enumerated Values:
1notApplicable
2dsx1E1
3dsx1ESF
4dsx1SF
5unframed
 .1.3.6.1.4.1.164.14.1.3.1.3.1.4
pwTDMoIpCfgDelaySensitivity
Determines whether to optimize the clock
for accurateness or for constant delay:
o Disable (Accurate clock is more important than constant delay)
o Enable (Constant delay is more important than accurate clock).
…
Enumerationr/w
Enumerated Values:
1notApplicable
2disable
3enable
 .1.3.6.1.4.1.164.14.1.3.1.3.1.5
pwTDMoIpCfgFramesInPacket
UDP payload length - determines the ethernet packet size
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.3.1.3.1.6

pwAtmCfgXTable

table
.1.3.6.1.4.1.164.14.1.3.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwAtmCfgXTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-Pw-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-Pw-MIB::pwAtmCfgXTable' 
This table is an extension of pwAtmCfgTable
of PW-ATM-R-MIB. Each row that is added/removed there
will be added/removed in this table.
pwAtmCfgXEntry row .1.3.6.1.4.1.164.14.1.3.2.1.1
This table is indexed by pwIdx, the value of which is equal
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MIB)- the pwIndex.
An entry may be created by Agent in this table…
Indexes
Column Syntax OID
pwAtmCfgAal5Mode
This objects defines whether AAL5 Mode is enabled for this PW.
Enumerationr/w
Enumerated Values:
1notApplicable
2disabled
3enabled
 .1.3.6.1.4.1.164.14.1.3.2.1.1.1
pwAtmCfgAal5SduTermType
This objects defines the AAL5-SDU Termination Type.
It means - where should the AAL5-SDU PW frame, received from PSN, be forwarded:

atm(2) - forwarded into ATM VCC.
router(3) - forwarded into router.
.
Enumerationr/w
Enumerated Values:
1notApplicable
2atm
3router
 .1.3.6.1.4.1.164.14.1.3.2.1.1.2
pwAtmCfgTimeout
This object defines the Timeout period, measured in usec.
Timeout mechanism is used in order to send out a packet
before the maximum concatenated cells limit has been reached.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.3.2.1.1.3

pwFrCfgTable

table
.1.3.6.1.4.1.164.14.1.3.3.1 · 1 row entry · 3 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwFrCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-Pw-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-Pw-MIB::pwFrCfgTable' 
This table contains a set of parameters for
Frame Relay PW in the pwFrTable.
pwFrCfgEntry row .1.3.6.1.4.1.164.14.1.3.3.1.1
These parameters define the characteristics of a
Frame Relay PW.
This table is indexed by pwIdx, the value of which is equal
to the same index that was created for the associated entry
in the PW Table (in the PW-STD-MI…
Indexes
Column Syntax OID
pwFrCfgDlciFieldLength
DLCI Field length in bytes. Possible values ae
10, 17 or 24
Unsigned32r/w
Constraints:
range: 24-24
range: 17-17
range: 10-10
 .1.3.6.1.4.1.164.14.1.3.3.1.1.1
pwFrCfgBitMarking
This object defines which Frame Relay bits are copied
into the outgoing interface or from the incoming interface.
When labeled bit is 1, FR bit is copied.
For incoming FR bits - DE, FECN and BECN:
DE - pwFrDeIncomingM…
Bitsr/w
Enumerated Values:
0pwFrDeIncomingMarking
1pwFrFecnIncomingMarking
2pwFrBecnIncomingMarking
3pwFrDeOutgoingMarking
4pwFrFecnOutgoingMarking
5pwFrBecnOutgoingMarking
 .1.3.6.1.4.1.164.14.1.3.3.1.1.2
pwFrCfgDlci
DLCI value of Frame Relay VC associated with this PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.1.3.3.1.1.3

pwPerfCurrentXTable

table
.1.3.6.1.4.1.164.14.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwPerfCurrentXTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-Pw-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-Pw-MIB::pwPerfCurrentXTable' 
This table is an extension of pwPerfCurrentTable (PW-STD-R-MIB).
pwPerfCurrentXEntry row .1.3.6.1.4.1.164.14.2.1.1
An entry in a table.
Indexes
Column Syntax OID
pwPerfCurrentInCongestDropPackets
The counter for number of received packets that are dropped
due to congestion by the PW (from the PSN)
in the current 15-minute interval.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.164.14.2.1.1.1
pwPerfCurrentOutCongestDropPackets
The counter for number of transmitted packets that are dropped
due to congestion by the PW (to the PSN)
in the current 15-minute interval.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.164.14.2.1.1.2
pwPerfCurrentInLostPackets
The counter for number of incoming lost packets that are
lost due to any reason in the current 15-minute interval.
The counter takes into account both missing packets as
defined by pwTDMPerfCurrentMissingPkts and packet…
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.164.14.2.1.1.3

pwPerfIntervalXTable

table
.1.3.6.1.4.1.164.14.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwPerfIntervalXTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-Pw-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-Pw-MIB::pwPerfIntervalXTable' 
This table is an extension of pwPerfIntervalTable (PW-STD-R-MIB).
pwPerfIntervalXEntry row .1.3.6.1.4.1.164.14.2.2.1
An entry in a table.
Indexes
Column Syntax OID
pwPerfIntervalXNumber
A number N, between 1 and 96, which identifies the
interval for which the set of statistics is available.
The interval identified by 1 is the most recently
completed 15 minute interval, and the interval identified
by N …
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.164.14.2.2.1.1
pwPerfIntervalInCongestDropPackets
The counter for number of received packets that are dropped
due to congestion by the PW (to the PSN) during the interval.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.164.14.2.2.1.2
pwPerfIntervalOutCongestDropPackets
The counter for number of transmitted packets that are dropped
due to congestion by the PW (to the PSN) during the interval.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.164.14.2.2.1.3
pwPerfIntervalInLostPackets
The counter for number of incoming lost packets that are
lost due to any reason in the 15-minute interval.
The counter takes into account both missing packets as
defined by pwTDMPerfIntervalMissingPkts and packets detec…
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.164.14.2.2.1.4

pwAtmPerfCurrentXTable

table
.1.3.6.1.4.1.164.14.2.3 · 1 row entry · 3 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwAtmPerfCurrentXTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-Pw-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-Pw-MIB::pwAtmPerfCurrentXTable' 
This table is an extension of pwArmPerfCurrentTable (PW-ATM-R-MIB).
pwAtmPerfCurrentXEntry row .1.3.6.1.4.1.164.14.2.3.1
An entry in a table.
Indexes
Column Syntax OID
pwAtmPerfCurrentInDiscardTotalCells
The number of total received cells (CLP0 and CLP1)
that were discarded by the traffic policer,
in the current 15-minute interval.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.164.14.2.3.1.1
pwAtmPerfCurrentInDiscardClp0Cells
The number of received CLP0 cells
that were discarded by the traffic policer,
in the current 15-minute interval.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.164.14.2.3.1.2
pwAtmPerfCurrentTaggedCells
The number of cells that were tagged
by the traffic policer from CLP=0 to CLP=1,
in the current 15-minute interval.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.164.14.2.3.1.3

pwAtmPerfIntervalXTable

table
.1.3.6.1.4.1.164.14.2.4 · 1 row entry · 4 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwAtmPerfIntervalXTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-Pw-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-Pw-MIB::pwAtmPerfIntervalXTable' 
This table is an extension of pwAtmPerfIntervalTable (PW-ATM-R-MIB).
pwAtmPerfIntervalXEntry row .1.3.6.1.4.1.164.14.2.4.1
An entry in a table.
Indexes
Column Syntax OID
pwAtmPerfIntervalXNumber
A number N, between 1 and 96, which identifies the
interval for which the set of statistics is available.
The interval identified by 1 is the most recently
completed 15 minute interval, and the interval identified
b…
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.164.14.2.4.1.1
pwAtmPerfIntervalInDiscardTotalCells
The number of total received cells (CLP0 and CLP1)
that were discarded by the traffic policer,
during the interval.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.164.14.2.4.1.2
pwAtmPerfIntervalInDiscardClp0Cells
The number of received CLP0 cells
that were discarded by the traffic policer,
during the interval.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.164.14.2.4.1.3
pwAtmPerfIntervalTaggedCells
The number of cells that were tagged
by the traffic policer from CLP=0 to CLP=1,
during the interval.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.164.14.2.4.1.4

pwPerfConnTable

table
.1.3.6.1.4.1.164.14.2.5 · 1 row entry · 7 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwPerfConnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-Pw-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-Pw-MIB::pwPerfConnTable' 
This table provides connectivity statistics for PW troubleshooting.
pwPerfConnEntry row .1.3.6.1.4.1.164.14.2.5.1
An entry in a table.
Indexes
Column Syntax OID
pwPerfConnJitterBufferLevel
The gauge that shows the current level (depth), in microseconds,
of the jitter buffer.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.5.1.1
pwPerfConnMinJitterBufferLevel
The gauge that shows the minimum level (depth), in microseconds,
of the jitter buffer since the last statistics reset.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.5.1.2
pwPerfConnMaxJitterBufferLevel
The gauge that shows the maximum level (depth), in microseconds,
of the jitter buffer since the last statistics reset.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.5.1.3
pwPerfConnRoundTripDelay
The gauge that shows the current round trip delay (RTD), in
microseconds.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.5.1.4
pwPerfConnMinRoundTripDelay
The gauge that shows the minimum round trip delay (RTD), in
microseconds, since the last statistics reset.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.5.1.5
pwPerfConnMaxRoundTripDelay
The gauge that shows the maximum round trip delay (RTD), in
microseconds, since the last statistics reset.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.5.1.6
pwPerfConnClearStats
A command that instructs the agent to clear the connectivity
statistics i.e. to reset the values of the minimum and maximum
jitter buffer levels and RTDs.

Setting this object to on(3), shall clear the con…
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.14.2.5.1.7

pwPerfConnCurrentTable

table
.1.3.6.1.4.1.164.14.2.6 · 1 row entry · 6 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwPerfConnCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-Pw-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-Pw-MIB::pwPerfConnCurrentTable' 
This table provides per-PW connectivity statistics for the current
15-minute interval.
pwPerfConnCurrentEntry row .1.3.6.1.4.1.164.14.2.6.1
An entry in this table is created by the agent for every PW.

After 15 minutes, the contents of this table entry are copied to a
new entry in the pwPerfConnIntervalTable, and the counts in this
entry are res…
Indexes
Column Syntax OID
pwPerfConnCurrentMinJitterBufferLevel
The gauge that shows the minimum level (depth), in microseconds,
of the jitter buffer in the current 15-minute interval.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.6.1.1
pwPerfConnCurrentAvgJitterBufferLevel
The gauge that shows the average level (depth), in microseconds,
of the jitter buffer in the current 15-minute interval.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.6.1.2
pwPerfConnCurrentMaxJitterBufferLevel
The gauge that shows the maximum level (depth), in microseconds,
of the jitter buffer in the current 15-minute interval.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.6.1.3
pwPerfConnCurrentMinRoundTripDelay
The gauge that shows the minimum round trip delay (RTD), in
microseconds, in the current 15-minute interval.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.6.1.4
pwPerfConnCurrentAvgRoundTripDelay
The gauge that shows the average round trip delay (RTD), in
microseconds, in the current 15-minute interval.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.6.1.5
pwPerfConnCurrentMaxRoundTripDelay
The gauge that shows the maximum round trip delay (RTD), in
microseconds, in the current 15-minute interval.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.6.1.6

pwPerfConnIntervalTable

table
.1.3.6.1.4.1.164.14.2.7 · 1 row entry · 10 columns
Open in standard view
Uses the rad variant from /opt/observium/mibs/rad.
Command help
Walk pwPerfConnIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-Pw-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-Pw-MIB::pwPerfConnIntervalTable' 
This table provides per-PW connectivity statistics for the history
15-minute intervals.
pwPerfConnIntervalEntry row .1.3.6.1.4.1.164.14.2.7.1
An entry in this table is created by the agent for every
pwPerfConnCurrentEntry that is 15 minutes old.

The contents of the current entry are copied to the new entry here.
The current entry then resets its …
Indexes
Column Syntax OID
pwPerfConnIntervalNumber
A number N, between 1 and 96, which identifies the interval for which
the set of statistics is available.
The interval identified by 1 is the most recently completed 15-minute
interval, and the interval identified by N …
Unsigned32
Constraints:
range: 1-96
 .1.3.6.1.4.1.164.14.2.7.1.1
pwPerfConnIntervalValidData
This variable indicates if the data for this interval is valid.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.164.14.2.7.1.2
pwPerfConnIntervalTimeElapsed
The duration of this interval in seconds.

Adjustments in the system's time-of-day clock may cause the interval
to be greater or less than the normal value. Therefore, this actual
interval value is provide…
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.7.1.3
pwPerfConnIntervalStartTime
The date and time of start of this interval.

Time zone octets are not used (OCTET STRING (SIZE (8)).
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.164.14.2.7.1.4
pwPerfConnIntervalMinJitterBufferLevel
The gauge that shows the minimum level (depth), in microseconds,
of the jitter buffer during the history 15-minute interval.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.7.1.5
pwPerfConnIntervalAvgJitterBufferLevel
The gauge that shows the average level (depth), in microseconds,
of the jitter buffer during the history 15-minute interval.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.7.1.6
pwPerfConnIntervalMaxJitterBufferLevel
The gauge that shows the maximum level (depth), in microseconds,
of the jitter buffer during the history 15-minute interval.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.7.1.7
pwPerfConnIntervalMinRoundTripDelay
The gauge that shows the minimum round trip delay (RTD), in
microseconds, during the history 15-minute interval.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.7.1.8
pwPerfConnIntervalAvgRoundTripDelay
The gauge that shows the average round trip delay (RTD), in
microseconds, during the history 15-minute interval.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.7.1.9
pwPerfConnIntervalMaxRoundTripDelay
The gauge that shows the maximum round trip delay (RTD), in
microseconds, during the history 15-minute interval.
microsecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.14.2.7.1.10