RAD-Mpmx-MIB Table View

List of agent related alarms and indications for alarms at
system level.

agnSAlrEntry row .1.3.6.1.4.1.164.3.1.2.1.15.1

An entry in table.

Indexes

agnSAlrIdx

Column	Syntax	OID
agnSAlrIdx A unique number to identify an entry in the alarm status table of the agent.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.1.15.1.1
agnSAlrCodeDescription This attribute is a full text description of the alarm . The alarm description includes the following information: alarm code, alarm text, alarm severity, Masked or Inverted flag and counter.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.164.3.1.2.1.15.1.2
agnSAlrCode A code identifying the alarm of an entry in the alarm status table at system level.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.1.15.1.3
agnSAlrSeverity The severity of the alarm.	Enumeration Enumerated Values: 3 event 4 minor 5 major 6 warning 7 critical	.1.3.6.1.4.1.164.3.1.2.1.15.1.4
agnSAlrState State of the alarm.	Enumeration Enumerated Values: 2 off 3 on	.1.3.6.1.4.1.164.3.1.2.1.15.1.5
agnSAlrCounter A counter - how many times the alarm occured since last clear operation. ON and OFF Alarm will be counted separately.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.1.15.1.6
agnSAlrMask Alarm mask : on/off.	Enumeration Enumerated Values: 2 off 3 on	.1.3.6.1.4.1.164.3.1.2.1.15.1.7
agnSAlrInvert Alarm invert : on/off.	Enumeration Enumerated Values: 2 off 3 on	.1.3.6.1.4.1.164.3.1.2.1.15.1.8

List of errors and warnings found during Sanity Check
process.

agnSErrListEntry row .1.3.6.1.4.1.164.3.1.2.1.20.1

An entry in table.

Indexes

agnSErrIdx

Column	Syntax	OID
agnSErrIdx Unique number to identify an entry in the error list table. The maximum entry value cannot exceed the value of 'agnSNoOfSanityCheckErr'.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.1.20.1.1
agnSErrDescription This attribute is a full text description of the sanity check error including error code, slot and port numbers related to the code .	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.164.3.1.2.1.20.1.2

This table contains an entry per configuration. It indicates
if the configuration is valid.

agnSCnfgEntry row .1.3.6.1.4.1.164.3.1.2.1.22.1

An entry in table.

Indexes

agnSEntryIdx

Column	Syntax	OID
agnSEntryIdx Unique number to identify an entry in the configuration table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.1.22.1.1
agnSEntryIsValid This attribute indicates whether the specific configuration is valid in the MUX . Value of NO indicates: no such configuration in the MUX.	Enumeration Enumerated Values: 2 no 3 yes	.1.3.6.1.4.1.164.3.1.2.1.22.1.2

All the entries of this table are identical (have the same
value) for all the configurations (1..100) except the
TmpCnfg.
The write operation into the Table Objects is valid only
for the TmpCnfg entry.

agnCClkSrcEntry row .1.3.6.1.4.1.164.3.1.2.2.4.1

An entry in table.

Indexes

agnCClkCnfgIdx agnCClkSrcIdx

Column	Syntax	OID
agnCClkCnfgIdx This attribute indicates the Idx of the Cnfg(1..100) being accessed and Idx 255 relates to the TmpCnfg.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.164.3.1.2.2.4.1.1
agnCClkSrcIdx An index to the table. There are only two entries to this table. Index 1 points to the Master clock parameters and Index 2 points to the Fallback clock parameters	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.164.3.1.2.2.4.1.2
agnCClkSrcMode The source of the nodal timing.	Enumerationr/w Enumerated Values: 1 internal 2 rxClk 3 adaptive	.1.3.6.1.4.1.164.3.1.2.2.4.1.3
agnCClkSrcSlt This entry is valid only when we are working in rxClk mode. For an invalid entry, the return value will be '7fff'h.	Enumerationr/w Enumerated Values: 1 notApplicable 5 io1 6 io2 7 io3 8 io4 9 io5 10 io6 11 io7 12 io8 13 io9 14 io10 15 io11 16 io12	.1.3.6.1.4.1.164.3.1.2.2.4.1.4
agnCClkSrcPrt This entry is valid only when we are working in rxClk or adaptive mode. For an invalid entry, the return value will be '7fff'h. - For rxClk mode, the values can be: exPrt1 (1) , exPrt2 (2) , …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.2.4.1.5

This table contains data about the agent configurations.
The table will support only data about valid configurations
of the agent.

agnCnfgDataEntry row .1.3.6.1.4.1.164.3.1.2.2.7.1

An entry in table.

Indexes

agnCnfgIdx

Column	Syntax	OID
agnCnfgIdx This object indicates the Idx of the agent' Cnfg the following objects refer. 255=Temporary Cnfg (Set is done only to this configuration).	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.164.3.1.2.2.7.1.1
agnCnfgDesc This object is a description of the Configuration, entered by user, to enhance Cnfg recognition.	OctetStringr/w Constraints: range: 0-30	.1.3.6.1.4.1.164.3.1.2.2.7.1.2
agnCnfgUpdDate This object indicates the date when last update of this configuration was performed, as it is known by the agent using its own real-time clock. The format would be as specified by the agnSDateFormat. When update is perf…	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.164.3.1.2.2.7.1.3
agnCnfgUpdTime This object indicates the time when last update of this configuration was performed, as it is known by the agent using its own real-time clock. When update is performed, the agent should save the time.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.164.3.1.2.2.7.1.4
agnCnfgUpdMnger This object indicates the IP Address of the Manager who performed the last update of this configuration. When update is performed, the agent should save the IP Address of the Manager who commanded the update. That will …	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.164.3.1.2.2.7.1.5

This table enables the user to set attributes to each alarm.
Setting  for a non-existing entry agnCnfgAlrMask,
agnCnfgAlrInvert or agnCnfgAlrFilter to 'yes'(or yesAndSave
for Mask) will add this new entry to the table.
Setting  for an existing entry agnCnfgAlrMask/
agnCnfgAlrInvert/agnCnfgAlrFilter (one or more) to 'no'
(noAndSave for Mask)  so that ALL  these objects' values are
'no' , will delete this entry from the table.
For agnCnfgAlrMask, only if [(last saved value=noAndSave)
AND (new value is 'no' or 'noAndSave')] the object's value
is considered 'no' for deleting the entry.
          
For some products (like MP, MPH, Vmux2100) the Active Alarms are always
part of the table and cannot be removed even if their Mask/Invert/Filter
are No.

agnCnfgAlrEntry row .1.3.6.1.4.1.164.3.1.2.2.8.2.1

An entry in table.

Indexes

agnCnfgAlrCode agnCnfgAlrSlot agnCnfgAlrPort

Column	Syntax	OID
agnCnfgAlrCode The alarm code. The following attributes refer this code.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.2.8.2.1.1
agnCnfgAlrSlot The alarm slot. The following attributes apply for the alarm code and slot selected. all = the attributes apply to all slots. notApplicable = the selected alarm is for system level. For the Vmux2100 Main Board clA (3) …	Enumeration Enumerated Values: 1 psA 2 psB 3 clA 4 clB 5 io1 6 io2 7 io3 8 io4 9 io5 10 io6 11 io7 12 io8 13 io9 14 io10 15 io11 16 io12 17 io13 18 io14 19 io15 200 all 255 notApplicable	.1.3.6.1.4.1.164.3.1.2.2.8.2.1.2
agnCnfgAlrPort The alarm port. The following attributes apply for the alarm code,slot and port selected. 200 = all = the attributes apply to all ports of the selected slot. When selected Slot is 'all', only 'all' or 'notApplicab…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.2.8.2.1.3
agnCnfgAlrMask An attribute defining the desired Mask state of an alarm . no - unmask (this command is not saved in agent's common database) noAndSave - unmask ; this command is saved in agent's common database yes - mask …	Enumerationr/w Enumerated Values: 1 no 2 noAndSave 3 yes 4 yesAndSave	.1.3.6.1.4.1.164.3.1.2.2.8.2.1.4
agnCnfgAlrInvert An attribute defining the desired Invert state of an alarm . no - not inverted. yes - inverted. For MP, it is not applicable for alarms that are currently OFF.	Enumerationr/w Enumerated Values: 2 no 3 yes	.1.3.6.1.4.1.164.3.1.2.2.8.2.1.5
agnCnfgAlrFilter An attribute defining if Filter is desired for the alarm . no - no filter. yes - filter activate. This filter is activated within a window of time defined by agnCnfgAlrFilterWindow. Its purpose is to av…	Enumerationr/w Enumerated Values: 2 no 3 yes	.1.3.6.1.4.1.164.3.1.2.2.8.2.1.6
agnCnfgAlrFilterSet This is a top threshold causing the alarm that passes it, to be declared Set (ON) at the end of the respective window of time. - For alarms defined by default as state alarms (minor,major) this value will be in [%]. -…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.2.8.2.1.7
agnCnfgAlrFilterReset This is a bottom threshold causing the alarm that does not pass it, to be declared Reset (ON) at the end of the respective window of time. - For alarms defined by default as state alarms (minor,major) this value will …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.2.8.2.1.8
agnCnfgAlrSeverity An attribute defining desired severity of an alarm code per slot/port	Enumerationr/w Enumerated Values: 3 event 4 minor 5 major 6 warning 7 critical	.1.3.6.1.4.1.164.3.1.2.2.8.2.1.9

This table enables the user to configure the desired Alarm
Reports according to alarms severity.

agnCnfgAlrReportEntry row .1.3.6.1.4.1.164.3.1.2.2.8.3.1

An entry in table.

Indexes

agnCnfgAlrReportType

Column	Syntax	OID
agnCnfgAlrReportType The alarm report type. trap - traps will be sent only for alarms having the selected On/Off severity or higher. buffer - only alarms having the selected On/Off severity and higher, will be reported to th…	Enumeration Enumerated Values: 1 trap 2 buffer 3 relay 4 alrLedOn 5 alrLedBlink 6 relay2	.1.3.6.1.4.1.164.3.1.2.2.8.3.1.1
agnCnfgAlrStartReportOn This object specifies the severity from which alarms will be reported. Alarms having this severity or higher, will be reported. This object specifies the report severity only for alarms that turn to ON state. noReport …	Enumerationr/w Enumerated Values: 2 noReport 3 event 4 minor 5 major 6 warning 7 critical	.1.3.6.1.4.1.164.3.1.2.2.8.3.1.2
agnCnfgAlrStartReportOff This object specifies the severity from which alarms will be reported. Alarms having this severity or higher, will be reported. This object specifies the report severity only for alarms that turn to OFF state. notAppl…	Enumerationr/w Enumerated Values: 1 notApplicable 2 noReport 3 event 4 minor 5 major 6 warning 7 critical	.1.3.6.1.4.1.164.3.1.2.2.8.3.1.3

Configuration of all T1/E1 Ring ML cards and ports.
The write operation into the table objects is valid only
for the TmpCnfg.
A Slot/Port that does not participate in the T1/E1 Ring, 
will not exist in this table.
A ML port that exists in this table, cannot exist at the same
time in the IO Redundancy table (sysCRdnTable).

agnCT1E1RingEntry row .1.3.6.1.4.1.164.3.1.2.2.10.1

An Entry in table agnCT1E1RingTable

Indexes

agnCT1E1RingCnfgIdx agnCT1E1RingPrimeSlot agnCT1E1RingPrimePort

Column	Syntax	OID
agnCT1E1RingCnfgIdx This object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.2.10.1.1
agnCT1E1RingPrimeSlot The slot number of the Primary card of the Ring Pair.	Enumeration Enumerated Values: 5 io1 6 io2 7 io3 8 io4 9 io5 10 io6 11 io7 12 io8 13 io9 14 io10 15 io11 16 io12 255 notApplicable	.1.3.6.1.4.1.164.3.1.2.2.10.1.2
agnCT1E1RingPrimePort The port number in the Primary Card. For external ports, the value will be as that of the port in the card. Example: external-3 -> 3 external-4 -> 4 For internal ports, the value will be 100 + the port…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.2.10.1.3
agnCT1E1RingSecSlot The slot number of the Secondary card of the Ring Pair.	Enumerationr/w Enumerated Values: 5 io1 6 io2 7 io3 8 io4 9 io5 10 io6 11 io7 12 io8 13 io9 14 io10 15 io11 16 io12 255 notApplicable	.1.3.6.1.4.1.164.3.1.2.2.10.1.4
agnCT1E1RingSecPort The port number in the Secondary Card. For external ports, the value will be as that of the port in the card. Example: external-3 -> 3 external-4 -> 4 For internal ports, the value will be 100 + the po…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.2.10.1.5
agnCT1E1RingRecTime T1/E1 Ring Recovery Time (sec). Valid Values: 1..99, 65535. 65535=NA.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.2.10.1.6
agnCT1E1RingRowStatus This parameter allows NMS to create/delete entries of this table. The only possible supported RowStatus vaules are active (1) and destroy (6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.3.1.2.2.10.1.7
agnCT1E1RingWTR T1/E1 Ring Wait to Restore (sec). Valid Values: 0..999, 65535. 65535=NA. When the value <> 65535, the value of agnCT1E1RingRecTime must be 65535.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.2.2.10.1.8
agnCT1E1RingDualFailDetection T1/E1 Ring - Dual Failure Detection enable/disable.	Enumerationr/w Enumerated Values: 2 disable 3 enable	.1.3.6.1.4.1.164.3.1.2.2.10.1.9

Configuration for Primary, Secondary and Third Link.
These are used for Link Backup.

agnCBuMlEntry row .1.3.6.1.4.1.164.3.1.2.2.12.1

An Entry in table agnCBuMlTable

Indexes

agnCBuMlCnfgIdx agnCBuMlRole

Column	Syntax	OID
agnCBuMlCnfgIdx This object indicates the Index of the Configuration database (1..255) being accessed. Index of 255 relates to the Temporary Configuration.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.2.12.1.1
agnCBuMlRole The Role of the Link. Primary Link is the Link that should usually work. If the Primary Link fails, the data will go through the Secondary Link. If both Primary and Secondary Links fail, the data will go through the Thi…	Enumeration Enumerated Values: 2 primary 3 secondary 4 third 5 fourth	.1.3.6.1.4.1.164.3.1.2.2.12.1.2
agnCBuMlType The Type of the Link. For E1/T1 the Link can be Link A - e1T1a or Link B - e1T1b. For ETH-NET, eth (5) can be used. For ETH-NET/USER ethNetUser (6) can be used.	Enumerationr/w Enumerated Values: 2 none 3 e1T1a 4 e1T1b 5 eth 6 ethNetUser	.1.3.6.1.4.1.164.3.1.2.2.12.1.3
agnCBuMlDefaultGateway Default Gateway's IP Address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.3.1.2.2.12.1.4
agnCBuMlSubnetMask The Link subnet mask.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.3.1.2.2.12.1.5
agnCBuMlOamFrequency Time in sec. between 2 OAM packets.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.2.12.1.6
agnCBuMlOamTimeoutCycles No. of cycles the Link will send OAM packets without receiving a response from the remote Link before switching to the Backup Link.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.2.12.1.7
agnCBuMlWaitToRestore This object defines traffic recovery time (in milliseconds) of the link after its recovery. This object is applicable only when Recovery Mode is revertive.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.2.2.12.1.8
agnCBuMlBfdSessionNum This object defines the BFD (Bidirectional Forwarding Detection) session number of the link. When no session exists or when N/A, the value will be 0.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.2.2.12.1.9

Table for the device Q50 parameters.
Q50 is a Signaling protocol used between PBX devices.
It is possible to control the initiation of calls using Q.50.
This is useful for devices when there is a congestion.

agnCQ50Entry row .1.3.6.1.4.1.164.3.1.2.2.13.1

An Entry in table agnCQ50Table

Indexes

agnCQ50CnfgIdx

Column	Syntax	OID
agnCQ50CnfgIdx This object indicates the Index of the Configuration database (1..255) being accessed. Index of 255 relates to the Temporary Configuration.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.2.13.1.1
agnCQ50StopCallsThresh This object indicates the Bandwidth Threshold percent (%) above which new Calls from the PBX will be disabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.2.13.1.2
agnCQ50DiscardPktThresh This object indicates the Bandwidth Threshold percent (%) above which voice packets will be discarded. Usually, the value selected should be higher than the value of agnCQ50StopCallsThresh.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.2.13.1.3
agnCQ50BlockNewModemVbdCallsThresh This object indicates the Modem VBD Calls Threshold percent (%) above which new modem calls will be rejected.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.2.13.1.4
agnCQ50BlockNewModemRelayCallsThresh This object indicates the Modem Relay Calls Threshold percent (%) above which new modem calls will be rejected.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.2.13.1.5

A table.

agnCmprEntry row .1.3.6.1.4.1.164.3.1.2.3.1.1

An entry in table.

Indexes

agnCmprTypIdx agnCmprCnfgIdx agnCmprVersion

Column	Syntax	OID
agnCmprTypIdx This attribute indicates the Type of the Compressed being referred.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.1.1.1
agnCmprCnfgIdx This attribute indicates the configuration to which the Compressed information is related.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.1.1.2
agnCmprVersion This attribute indicates the version of the internal format of the Compressed data	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.1.1.3
agnCmprObj This attribute is the compressed information itself.	OctetStringr/w	.1.3.6.1.4.1.164.3.1.2.3.1.1.4

A table.

agnDlciCmprEntry row .1.3.6.1.4.1.164.3.1.2.3.2.1

An entry in table.

Indexes

agnDlciCmprCnfgIdx agnDlciCmprVersion agnDlciCmprDlciIdx

Column	Syntax	OID
agnDlciCmprCnfgIdx This attribute indicates the configuration to which the Compressed information is related.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.2.1.1
agnDlciCmprVersion This attribute indicates the version of the internal format of the Compressed data	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.2.1.2
agnDlciCmprDlciIdx This attribute indicates a unique identifier of the Dlci, the compressed information relates to. The values are between 16 - 991.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.2.1.3
agnDlciCmprObj This attribute is the compressed information itself.	OctetStringr/w	.1.3.6.1.4.1.164.3.1.2.3.2.1.4

A table.

agnAlarmsCmprEntry row .1.3.6.1.4.1.164.3.1.2.3.3.1

An entry in table.

Indexes

agnAlarmsCmprVersion agnAlarmsCmprAlarmIdx

Column	Syntax	OID
agnAlarmsCmprVersion This attribute indicates the version of the internal format of the Compressed data	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.3.1.1
agnAlarmsCmprAlarmIdx A unique number to identify an entry in the alarm status table of the agent.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.3.1.2
agnAlarmsCmprObj This attribute is the compressed information itself.	OctetString	.1.3.6.1.4.1.164.3.1.2.3.3.1.3

A table.

agnAlrBufCmprEntry row .1.3.6.1.4.1.164.3.1.2.3.4.1

An entry in table.

Indexes

agnAlrBufCmprVersion agnAlrBufCmprAlarmIdx

Column	Syntax	OID
agnAlrBufCmprVersion This attribute indicates the version of the internal format of the Compressed data	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.4.1.1
agnAlrBufCmprAlarmIdx A unique number to identify an entry in the history alarms buffer of the agent.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.4.1.2
agnAlrBufCmprObj This attribute is the compressed information itself.	OctetString	.1.3.6.1.4.1.164.3.1.2.3.4.1.3

A table.

agnSCmprErrListEntry row .1.3.6.1.4.1.164.3.1.2.3.5.1

An entry in table.

Indexes

agnSCmprErrVersion agnSCmprErrIdx

Column	Syntax	OID
agnSCmprErrVersion The version of the compressed data	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.5.1.1
agnSCmprErrIdx Unique number to identify an entry in the errors list table. The maximum entry value cannot exceed the value of 'agnSNoOfSanityCheckErr'.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.5.1.2
agnSCmprErrObj This attribute is a full text description of the error, including: error code, slot and port numbers related to the code .	OctetString	.1.3.6.1.4.1.164.3.1.2.3.5.1.3

A table.

agnTsCmprEntry row .1.3.6.1.4.1.164.3.1.2.3.6.1

An entry in table.

Indexes

agnTsCmprVerIdx agnTsCmprCnfgIdx agnTsCmprSlotIdx agnTsCmprPortIdx agnTsCmprPduIdx

Column	Syntax	OID
agnTsCmprVerIdx This object indicates the version of the internal format of the Compressed data.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.6.1.1
agnTsCmprCnfgIdx This object indicates the configuration to which the Compressed information is related. 255=temporary configuration. Set can be performed only to the temporary configuration.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.6.1.2
agnTsCmprSlotIdx This object indicates the Slot to which the Compressed information is related. For MP-2100: IO-1..IO-12 = (5).. (16) For DXC-30 : IO-1..IO-15 = (5).. (19). NA=255.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.6.1.3
agnTsCmprPortIdx This object indicates the Port within the Slot, to which the Compressed information is related. For Port Index see each product's spec.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.6.1.4
agnTsCmprPduIdx This object indicates the PDU index within the same port. That provides for the case when one PDU is not sufficient for all TS Assignment data of the same port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.6.1.5
agnTsCmprData This object is the compressed information itself. It provides information about all TSs of a port.	OctetStringr/w	.1.3.6.1.4.1.164.3.1.2.3.6.1.6

A table.

agnXCmprEntry row .1.3.6.1.4.1.164.3.1.2.3.7.1

An entry in table.

Indexes

agnXCmprTypIdx agnXCmprVersion agnXCmprIdx3 agnXCmprIdx4 agnXCmprIdx5 agnXCmprIdx6 agnXCmprIdx7

Column	Syntax	OID
agnXCmprTypIdx This attribute indicates the Type of the Compressed being referred. One of the types is V5.1 Variant data.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.7.1.1
agnXCmprVersion This attribute indicates the version of the internal format of the Compressed data.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.7.1.2
agnXCmprIdx3 3rd index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant, this attribute indicates the configuration to which the Compressed information is related. 255=temporary configuratio…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.7.1.3
agnXCmprIdx4 4th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates a unique number of the slot position where the card is inserted. Valid values: psA(1),psB…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.7.1.4
agnXCmprIdx5 5th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates a unique identifier of the port the compressed information relates to. Valid values: exPrt1 …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.7.1.5
agnXCmprIdx6 6th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute indicates the Variant index. Valid values are: 0..127, 255 (= temp cnfg).Set can be performed only to …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.7.1.6
agnXCmprIdx7 7th index - can be used for any purpose according to the agnXCmprTypIdx. Example: for V5.1 Variant,this attribute is not needed. Therefore, its value will be always 255=notApplicable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.3.7.1.7
agnXCmprObj This attribute is the compressed information itself.	OctetStringr/w	.1.3.6.1.4.1.164.3.1.2.3.7.1.8

A table.

alrBufEntry row .1.3.6.1.4.1.164.3.1.2.4.1.1

An entry in table.

Indexes

alrBufIdx

Column	Syntax	OID
alrBufIdx This attribute indicates a unique number to identify this entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.4.1.1.1
alrBufDescription This entry is a unique text description of the alarm in the buffer. The alarm description includes the following information: alarm code, slot id, card type, channel id , alarm text, alarm status, masked flag and event …	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.164.3.1.2.4.1.1.2
alrBufCode A code identifying the alarm of an entry in the alarm buffer table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.2.4.1.1.3
alrBufSlot The slot number this alarm refers to. When the alarm refers to a system alarm, the value will be 'notApplicable(255)'.	Enumeration Enumerated Values: 1 psA 2 psB 3 clA 4 clB 5 io1 6 io2 7 io3 8 io4 9 io5 10 io6 11 io7 12 io8 13 io9 14 io10 255 notApplicable	.1.3.6.1.4.1.164.3.1.2.4.1.1.4
alrBufPort The port number this alarm refers to. If the port number is irrelevant to this alarm (if it is a system/card level alarm) the value will be 9999.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.2.4.1.1.5
alrBufSeverity The severity of the alarm.	Enumeration Enumerated Values: 3 event 4 minor 5 major 6 warning 7 critical	.1.3.6.1.4.1.164.3.1.2.4.1.1.6
alrBufState State of the alarm (On/Off).	Enumeration Enumerated Values: 2 off 3 on	.1.3.6.1.4.1.164.3.1.2.4.1.1.7

This table devides the week days into categories needed for
DB flip consideration.

agnCAgendaEntry row .1.3.6.1.4.1.164.3.1.2.5.1.1

An entry in table.

Indexes

agnCAgendaCnfgIdx agnCAgendaDayIdx

Column	Syntax	OID
agnCAgendaCnfgIdx Active or Temporary Agenda Table. Both configurations can be read but only the Temporary can be written to.	Enumeration Enumerated Values: 1 active 255 temporary	.1.3.6.1.4.1.164.3.1.2.5.1.1.1
agnCAgendaDayIdx Day of week	Enumeration Enumerated Values: 1 sunday 2 monday 3 tuesday 4 wednesday 5 thursday 6 friday 7 saturday	.1.3.6.1.4.1.164.3.1.2.5.1.1.2
agnCAgendaDayCategory The Category of the Day	Enumerationr/w Enumerated Values: 1 fullWorkday 2 partialWorkday 3 weekend	.1.3.6.1.4.1.164.3.1.2.5.1.1.3

This table holds the Net Events the MUX should trace

agnCFlipNetEventsEntry row .1.3.6.1.4.1.164.3.1.2.5.2.1

An entry in table.

Indexes

agnCFlipNetEventsCnfgIdx agnCFlipNetEventIdx

Column	Syntax	OID
agnCFlipNetEventsCnfgIdx Active or Temporary Net Events Table. Both configurations can be read but only the Temporary can be written to.	Enumeration Enumerated Values: 1 active 255 temporary	.1.3.6.1.4.1.164.3.1.2.5.2.1.1
agnCFlipNetEventIdx Entry within the table	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.164.3.1.2.5.2.1.2
agnCFlipNetEventActive Indicates if the entry is valid. In order to Add/Modify parameters of an entry, this object should be set to Yes. In order to delete an entry, this object should be Set to No.	Enumerationr/w Enumerated Values: 2 no 3 yes	.1.3.6.1.4.1.164.3.1.2.5.2.1.3
agnCFlipNetEventType The Net Event type	Enumerationr/w Enumerated Values: 1 time 2 linkDown 3 congestion	.1.3.6.1.4.1.164.3.1.2.5.2.1.4
agnCFlipNetEventNo The Net Event No. (Bit Index)	Integer32r/w Constraints: range: 1-512	.1.3.6.1.4.1.164.3.1.2.5.2.1.5
agnCFlipNetEventSlot The slot to which the net event relates . Not applicable for time event	Enumerationr/w Enumerated Values: 1 notApplicable 3 clA 4 clB 5 io1 6 io2 7 io3 8 io4 9 io5 10 io6 11 io7 12 io8 13 io9 14 io10 15 io11 16 io12	.1.3.6.1.4.1.164.3.1.2.5.2.1.6
agnCFlipNetEventPort The port within the relevant slot. Valid values: - extPrt1(1)..exPrt16(16) - notApplicable(100) - inPrt1(101)..inPrt84(184)	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.5.2.1.7
agnCFlipNetEventISD The time in seconds since the Net Event was reported as ON until it is considered as ON. Not relevant for time events.	Integer32r/w Constraints: range: 1-999	.1.3.6.1.4.1.164.3.1.2.5.2.1.8
agnCFlipNetEventOSD The time in seconds since the net event was reported as OFF until it is considered as OFF. Not relevant for time events.	Integer32r/w Constraints: range: 1-999	.1.3.6.1.4.1.164.3.1.2.5.2.1.9
agnCFlipNetEventDayType The time event relates to all days defined in this category in the agnCAgendaTable. Applicable only for time event	Enumerationr/w Enumerated Values: 1 notApplicable 2 fullWorkday 3 partialWorkday 4 weekend	.1.3.6.1.4.1.164.3.1.2.5.2.1.10
agnCFlipNetEventStartTime The time event will be activated at this time. The format is hh:mm.	OctetStringr/w Constraints: range: 5-5	.1.3.6.1.4.1.164.3.1.2.5.2.1.11
agnCFlipNetEventEndTime The time event will be deactivated at this time. The format is hh:mm.	OctetStringr/w Constraints: range: 5-5	.1.3.6.1.4.1.164.3.1.2.5.2.1.12

The DB Flip Decisions Table

agnCFlipEntry row .1.3.6.1.4.1.164.3.1.2.5.3.1

An entry in table.

Indexes

agnCFlipCnfgIdx agnCFlipIdx

Column	Syntax	OID
agnCFlipCnfgIdx Active or Temporary Flip Decisions Table. Both configurations can be read but only the Temporary can be written to.	Enumeration Enumerated Values: 1 active 255 temporary	.1.3.6.1.4.1.164.3.1.2.5.3.1.1
agnCFlipIdx Entry number within the table	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.164.3.1.2.5.3.1.2
agnCFlipActive Indicates if the entry is valid. In order to Add/Modify parameters of an entry this object should be Set to Yes. In order to delete an entry, this object should be Set to No.	Enumerationr/w Enumerated Values: 2 no 3 yes	.1.3.6.1.4.1.164.3.1.2.5.3.1.3
agnCFlipLogicalExp A logical expression composed of events numbers (which were configured in the 'AgnCFlipNetEvantsTable') and logical operators ('|', '&', '!', '(', ')') between them. e.g - (1 & !2) | (121 & 230)	OctetStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.164.3.1.2.5.3.1.4
agnCFlipDbNo The ID of the required DB	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.164.3.1.2.5.3.1.5
agnCFlipDiscardDe Indicates whether the Mux should start discarding all DE. (MP3000 Only).	Enumerationr/w Enumerated Values: 1 notApplicable 2 no 3 yes	.1.3.6.1.4.1.164.3.1.2.5.3.1.6

A decoding table . For each type of list, a description is
given for each existing code.

agnListDecodingEntry row .1.3.6.1.4.1.164.3.1.2.7.1.1

An entry in table.

Indexes

agnListDecodingType agnListDecodingCode

Column	Syntax	OID
agnListDecodingType The type of list the decoding data refers to. alr - Alarms list sanity - Sanity Check Error list. counter - Counter type of ifPerfCounterType	Enumeration Enumerated Values: 1 alr 2 sanity 3 counter	.1.3.6.1.4.1.164.3.1.2.7.1.1.1
agnListDecodingCode The specific code for which decoding is needed.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.7.1.1.2
agnListDecodingDescription The description fitting the specific code and type of list required.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.164.3.1.2.7.1.1.3
agnListDecodingDefState This object is applicable only for agnListDecodingType=alr. It reports the default state/severity of each alarm. User can change the severity of the alarms defined by this default via the agnListDecodingSeverity object.	Enumeration Enumerated Values: 1 notApplicable 3 event 4 minor 5 major 6 warning 7 critical	.1.3.6.1.4.1.164.3.1.2.7.1.1.4
agnListDecodingSeverity This object is applicable only for agnListDecodingType=alr. It enables the user to select a severity for each alarm. The severity is set per alarm code (same for all slots/ports using this code). event - can be set only…	Enumerationr/w Enumerated Values: 1 notApplicable 3 event 4 minor 5 major 6 warning 7 critical	.1.3.6.1.4.1.164.3.1.2.7.1.1.5
agnListDecodingAcmRelaySlt This object indicates the ACM slot, desired for outbound relay (report) for the selected alarm. In the ?004 Unit the entries io6(10)..io12(16) are not valid. none - when agnListDecodingType=alr AND the selected …	Enumerationr/w Enumerated Values: 1 none 5 io1 6 io2 7 io3 8 io4 9 io5 10 io6 11 io7 12 io8 13 io9 14 io10 15 io11 16 io12 255 notApplicable	.1.3.6.1.4.1.164.3.1.2.7.1.1.6
agnListDecodingAcmRelayPrt This object indicates the ACM port within the slot, desired for outbound relay (report) for the selected alarm. notApplicable - when agnListDecodingType=sanity OR when agnListDecodingAcmRelaySlt=notAppli…	Enumerationr/w Enumerated Values: 1 exPrt1 2 exPrt2 3 exPrt3 4 exPrt4 255 notApplicable	.1.3.6.1.4.1.164.3.1.2.7.1.1.7

The write operation into the Table Objects is valid only
to the TmpCnfg entry.

agnDlciEntry row .1.3.6.1.4.1.164.3.1.2.8.1.1

An entry in table.

Indexes

agnDlciCnfgIdx agnDlciLSltIdx agnDlciLPrtIdx agnDlciHIdx agnDlciHSltIdx agnDlciHPrtIdx agnDlciLIdx

Column	Syntax	OID
agnDlciCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.164.3.1.2.8.1.1.1
agnDlciLSltIdx This attribute indicates a unique slot position where the card is inserted. This is the Source Slot of the DLCI. vs=Voice Switching In the ?004 Unit the entries io6(10)..io16) are not valid. For ISDN BRI ports of …	Enumeration Enumerated Values: 3 cl 5 io1 6 io2 7 io3 8 io4 9 io5 10 io6 11 io7 12 io8 13 io9 14 io10 15 io11 16 io12 254 vs 255 notApplicable	.1.3.6.1.4.1.164.3.1.2.8.1.1.2
agnDlciLPrtIdx This attribute indicates a unique external or internal port number, including linkSelector or encapsulator. This is the Source Port of the DLCI. 100=noConnect (for voice switching) LPrtIdx is defined according one…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.8.1.1.3
agnDlciLIdx This attribute indicates a unique index for each possible used DLCI(16..991). This is the Source Side of the DLCI. 0=notApplicable (for voice switching) LIdx is defined according one of the following possiblities: 1. LS…	Integer32 Constraints: range: 0-991	.1.3.6.1.4.1.164.3.1.2.8.1.1.4
agnDlciHSltIdx This attribute indicates a unique slot position In the Mux where the DLCI is routed to - Destination Slot. For ISDN BRI ports of MX300/30 units: io1(5) = isdn1(5) and io2(6) = isdn2(6) In the ?004 Unit the entries i…	Enumeration Enumerated Values: 3 cl 5 io1 6 io2 7 io3 8 io4 9 io5 10 io6 11 io7 12 io8 13 io9 14 io10 15 io11 16 io12 255 notApplicable	.1.3.6.1.4.1.164.3.1.2.8.1.1.5
agnDlciHPrtIdx This attribute indicates a unique port number where the DLCI is routed to - Destination Port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.8.1.1.6
agnDlciHIdx This attribute indicates a unique internal connection DLCI number where the Source DLCI is routed to - the Destination Side of the DLCI.	Integer32 Constraints: range: 1-991	.1.3.6.1.4.1.164.3.1.2.8.1.1.7
agnDlciTxBc This attribute indicates a unique Tx committed bandwidth on the user transmit line or at the port receive line.	Enumerationr/w Enumerated Values: 1 full 2 zero 3 txBc5100bps 4 txBc6400bps 5 txBc8300bps 6 txBc9600bps 7 txBc14400bps 8 txBc19200bps 9 txBc28800bps 10 txBc32000bps 11 txBc38400bps 12 txBc48000bps 13 txBc56000bps 14 txBc57600bps 15 txBc64Kbps 16 txBc128Kbps 17 txBc192Kbps 18 txBc256Kbps 19 txBc320Kbps 20 txBc384Kbps 21 txBc448Kbps 22 txBc512Kbps 23 txBc768Kbps 24 txBc896Kbps 25 txBc1024Kbps 26 txBc1152Kbps 27 txBc1280Kbps 28 txBc1344Kbps 29 txBc1472Kbps 30 txBc1600Kbps 31 txBc1728Kbps 32 txBc1856Kbps 33 txBc1920Kbps 34 txBc1984Kbps 35 txBc2048Kbps 36 txBc16000bps 37 txBc112Kbps 38 txBc168Kbps 39 txBc224Kbps 40 txBc336Kbps 41 txBc672Kbps 42 txBc1536Kbps 43 txBc1792Kbps	.1.3.6.1.4.1.164.3.1.2.8.1.1.8
agnDlciTxBe This attribute indicates a unique Tx excess bandwidth on the user transmit line or at the port receive line.	Enumerationr/w Enumerated Values: 1 full 2 zero 3 txBe5100bps 4 txBe6400bps 5 txBe8300bps 6 txBe9600bps 7 txBe14400bps 8 txBe19200bps 9 txBe28800bps 10 txBe32000bps 11 txBe38400bps 12 txBe48000bps 13 txBe56000bps 14 txBe57600bps 15 txBe64Kbps 16 txBe128Kbps 17 txBe192Kbps 18 txBe256Kbps 19 txBe320Kbps 20 txBe384Kbps 21 txBe448Kbps 22 txBe512Kbps 23 txBe768Kbps 24 txBe896Kbps 25 txBe1024Kbps 26 txBe1152Kbps 27 txBe1280Kbps 28 txBe1344Kbps 29 txBe1472Kbps 30 txBe1600Kbps 31 txBe1728Kbps 32 txBe1856Kbps 33 txBe1920Kbps 34 txBe1984Kbps 35 txBe2048Kbps 36 txBe16000bps 37 txBe112Kbps 38 txBe168Kbps 39 txBe224Kbps 40 txBe336Kbps 41 txBe672Kbps 42 txBe1536Kbps 43 txBe1792Kbps	.1.3.6.1.4.1.164.3.1.2.8.1.1.9
agnDlciRxBc This attribute indicates a unique Rx committed bandwidth on the user receive line or at the port transmit line.	Enumerationr/w Enumerated Values: 1 full 2 zero 3 rxBc5100bps 4 rxBc6400bps 5 rxBc8300bps 6 rxBc9600bps 7 rxBc14400bps 8 rxBc19200bps 9 rxBc28800bps 10 rxBc32000bps 11 rxBc38400bps 12 rxBc48000bps 13 rxBc56000bps 14 rxBc57600bps 15 rxBc64Kbps 16 rxBc128Kbps 17 rxBc192Kbps 18 rxBc256Kbps 19 rxBc320Kbps 20 rxBc384Kbps 21 rxBc448Kbps 22 rxBc512Kbps 23 rxBc768Kbps 24 rxBc896Kbps 25 rxBc1024Kbps 26 rxBc1152Kbps 27 rxBc1280Kbps 28 rxBc1344Kbps 29 rxBc1472Kbps 30 rxBc1600Kbps 31 rxBc1728Kbps 32 rxBc1856Kbps 33 rxBc1920Kbps 34 rxBc1984Kbps 35 rxBc2048Kbps 36 rxBc16000bps 37 rxBc112Kbps 38 rxBc168Kbps 39 rxBc224Kbps 40 rxBc336Kbps 41 rxBc672Kbps 42 rxBc1536Kbps 43 rxBc1792Kbps	.1.3.6.1.4.1.164.3.1.2.8.1.1.10
agnDlciRxBe This attribute indicates a unique Rx excess bandwidth on the user receive line or at the port transmit line.	Enumerationr/w Enumerated Values: 1 full 2 zero 3 rxBe5100bps 4 rxBe6400bps 5 rxBe8300bps 6 rxBe9600bps 7 rxBe14400bps 8 rxBe19200bps 9 rxBe28800bps 10 rxBe32000bps 11 rxBe38400bps 12 rxBe48000bps 13 rxBe56000bps 14 rxBe57600bps 15 rxBe64Kbps 16 rxBe128Kbps 17 rxBe192Kbps 18 rxBe256Kbps 19 rxBe320Kbps 20 rxBe384Kbps 21 rxBe448Kbps 22 rxBe512Kbps 23 rxBe768Kbps 24 rxBe896Kbps 25 rxBe1024Kbps 26 rxBe1152Kbps 27 rxBe1280Kbps 28 rxBe1344Kbps 29 rxBe1472Kbps 30 rxBe1600Kbps 31 rxBe1728Kbps 32 rxBe1856Kbps 33 rxBe1920Kbps 34 rxBe1984Kbps 35 rxBe2048Kbps 36 rxBe16000bps 37 rxBe112Kbps 38 rxBe168Kbps 39 rxBe224Kbps 40 rxBe336Kbps 41 rxBe672Kbps 42 rxBe1536Kbps 43 rxBe1792Kbps	.1.3.6.1.4.1.164.3.1.2.8.1.1.11
agnDlciPriority This attribute indicates a unique priority of the pcv. 1 is the lowest priority and 7 is the highest priority.	Integer32r/w Constraints: range: 1-8	.1.3.6.1.4.1.164.3.1.2.8.1.1.12
agnDlciStatus This attribute indicates the status of the pvc. The status is disconnected(1) when one of the sides is programmed as not connected	Enumeration Enumerated Values: 1 disconnected 2 connected	.1.3.6.1.4.1.164.3.1.2.8.1.1.13
agnDlciSpoofing This object refers to sending of RIP messages: - yes : RIP messages will be sent ONLY if there is a change in the Net. - no : RIP messages will be always sent. This object is relevant only when one side of the …	Enumerationr/w Enumerated Values: 2 no 3 yes	.1.3.6.1.4.1.164.3.1.2.8.1.1.14
agnDlciFunnelEnable This object selects Funnel activation: - disabled: Funnel operation will be disabled. The agnDlciTxBe and agnDlciTxBc values are not used for funneling. - enabled : Funnel operation …	Enumerationr/w Enumerated Values: 2 disabled 3 enabled 4 source 5 destination	.1.3.6.1.4.1.164.3.1.2.8.1.1.15
agnDlciRoutingProtocol This object is relevant only when one side of the DLCI is a CL-NMS interface. It defines which Routing Protocol will be used for management via CL-NMS port. notApplicable will be used for all slots but CL. rip is a prop…	Enumerationr/w Enumerated Values: 1 notApplicable 2 rip 3 rip2 4 none	.1.3.6.1.4.1.164.3.1.2.8.1.1.16
agnDlciRowStatus This attribute allows to create/delete a row in this table. For creating a row, the NMS should set agnRowStatus.255.id2.id3.id4.id5.id6.id7 = active(1). For destroying a row, the NMS should set: agnRowStatus.255…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.3.1.2.8.1.1.17

MXcess Configuration for Voice Switching.

agnVoiceSwConfEntry row .1.3.6.1.4.1.164.3.1.2.9.1.1

An entry in table.

Indexes

agnVoiceSwConfIdx

Column	Syntax	OID
agnVoiceSwConfIdx Active or Temporary Table. Both configurations can be read but only the Temporary can be written to.	Enumeration Enumerated Values: 1 active 255 temporary	.1.3.6.1.4.1.164.3.1.2.9.1.1.1
agnVoiceSwConfZoneId 1 or 2 digits, (0-9)(1-9).	OctetStringr/w Constraints: range: 1-2	.1.3.6.1.4.1.164.3.1.2.9.1.1.2
agnVoiceSwConfNodeId 1, 2 or 3 digits, (1-9),(0-9),(0-9).	OctetStringr/w Constraints: range: 1-3	.1.3.6.1.4.1.164.3.1.2.9.1.1.3
agnVoiceSwConfNoOfHops Number of hops the frame will go through the net before deciding to discard the frame (like time-to-live in IP). 0 = notApplicable Default=20 .	Integer32r/w Constraints: range: 0-20	.1.3.6.1.4.1.164.3.1.2.9.1.1.4
agnVoiceSwConfSidt SIDT: Short Inter Digit Timeout used as timer (in sec.) between digits after routing is completed. The timeout indicates end of dialing and the call can then be setup. 0 = notApplicable Default=2 sec.	Integer32r/w Constraints: range: 0-30	.1.3.6.1.4.1.164.3.1.2.9.1.1.5
agnVoiceSwConfLidt LIDT: Long Inter Digit Timeout used as timer between digits before routing is completed. If no digits were dialed and LIDT expired then the user will get an error tone and the call will be disconnected. 0…	Integer32r/w Constraints: range: 0-30	.1.3.6.1.4.1.164.3.1.2.9.1.1.6
agnVoiceSwConfDialPlan This is the Dialing Plan method that will be used in the Voice Switching. Static Dialing Plan - Routing is defined by the current device Zone and Node ID in the Network. Static Dialing Plan Plus - …	Enumerationr/w Enumerated Values: 2 staticDialPlan 3 staticDialPlanPlus 4 flexDialPlan	.1.3.6.1.4.1.164.3.1.2.9.1.1.7

Routing Table for Voice Switching.

agnVoiceSwConfRtEntry row .1.3.6.1.4.1.164.3.1.2.9.2.1

An entry in table.

Indexes

agnVoiceSwConfRtDbId agnVoiceSwConfRtIdx

Column	Syntax	OID
agnVoiceSwConfRtDbId Active or Temporary Table. Both configurations can be read but only the Temporary can be written to.	Enumeration Enumerated Values: 1 active 255 temporary	.1.3.6.1.4.1.164.3.1.2.9.2.1.1
agnVoiceSwConfRtIdx The Index of the row.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.9.2.1.2
agnVoiceSwConfRtDigits Dialed digits: Series of digits 0...9, '*', '#' or '%'. The '*' and '#' can have many uses according to the user's decision. For example, they can be used as part of the Dialed Number, they exist on the phone number pan…	OctetStringr/w Constraints: range: 1-7	.1.3.6.1.4.1.164.3.1.2.9.2.1.3
agnVoiceSwConfRtAction Action that the system should perform for the digits: agnVoiceSwConfRtDigits. The action that is allowed depends on the Dialing Plan. Here is the list of the allowed actions: For Static Dialing Plan - zone, node, in, sh…	Enumerationr/w Enumerated Values: 1 notApplicable 2 zone 3 node 4 shortDialing 5 in 6 hgr 7 del 8 rep 9 pri 10 bri 11 numDigDP 12 route 13 ext	.1.3.6.1.4.1.164.3.1.2.9.2.1.4
agnVoiceSwConfRtData This field is relevant for actions hgr(6), and rep(8), numDigDP(11) and contains the following information: For hgr - the number of the Hunt Group. For rep - the number of digits to be replaced with. For numDigDP - the …	OctetStringr/w Constraints: range: 1-7	.1.3.6.1.4.1.164.3.1.2.9.2.1.5
agnVoiceSwConfRtSlot Routing Slot- Relevant for actions zone(2), node(3), shortDialing(4), route(12), ext(13).	Enumerationr/w Enumerated Values: 2 noConnect 3 cl 5 io1 6 io2 7 io3 8 io4 9 io5 10 io6 11 io7 12 io8 13 io9 14 io10 15 io11 16 io12 255 notApplicable	.1.3.6.1.4.1.164.3.1.2.9.2.1.6
agnVoiceSwConfRtPort Routing Port- Relevant for actions zone(2), node(3), shortDialing(4), route(12), ext(13). 100=noConnect (for non-routing case).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.9.2.1.7
agnVoiceSwConfRtDlci Routing DLCI- Relevant for actions zone(2), node(3), shortDialing(4), route(12), ext(13). Valid values: 0=notApplicable (for non-routing case). 1, 16..991	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.9.2.1.8
agnVoiceSwConfRtRowStatus Status of the row for creating/deleting entries in the table. The only possible supported RowStatus vaules are active (1), notInService (2), notReady(3), createAndGo(4), createAndWait(5) and destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.3.1.2.9.2.1.9
agnVoiceSwConfRtMaxCalls Maximum no. of simultaneous voice calls that are allowed in the direction defined by the current entry. Default=0 (No Limit).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.9.2.1.10
agnVoiceSwConfRtPriority This attribute indicates a unique priority of the Voice Switching Route. 1 is the lowest priority and 7 is the highest priority. 0 means N/A	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.9.2.1.11

Table of Hunt Groups.

agnVoiceSwConfHGEntry row .1.3.6.1.4.1.164.3.1.2.9.5.1

An entry in table.

Indexes

agnVoiceSwConfHGdbIdx agnVoiceSwConfHGIdx

Column	Syntax	OID
agnVoiceSwConfHGdbIdx Active or Temporary Table. Both configurations can be read but only the Temporary can be written to.	Enumeration Enumerated Values: 1 active 255 temporary	.1.3.6.1.4.1.164.3.1.2.9.5.1.1
agnVoiceSwConfHGIdx For Vmux-300 devices - This object represents a combination of - Hunt Group number and Extension number OR - Port number and Extension number. For other devices (e.g. MXcess, MP-2100H) - There may be up t…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.9.5.1.2
agnVoiceSwConfHGConnect This attribute indicates whether the hunt group should be considered in any of the mux algorithms.	Enumerationr/w Enumerated Values: 2 no 3 yes	.1.3.6.1.4.1.164.3.1.2.9.5.1.3
agnVoiceSwConfHGExt This is the extension number of the hunt group. 0 is for not valid. The allowed range is 10 - 99.	Integer32r/w Constraints: range: 0-99	.1.3.6.1.4.1.164.3.1.2.9.5.1.4
agnVoiceSwConfHGExtString This is the extension string of the hunt group. This string is a combination of digits, * and #.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.3.1.2.9.5.1.5
agnVoiceSwConfHGUserParams This object indicates the User's parameters.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.3.1.2.9.5.1.6
agnVoiceSwConfHGStatus This object enables the user to create/delete entries in this table. Its usage for values (1)..(6) should be identical to RowStatus SYNTAX. notApplicable(255) - should be used when the table is static …	Enumerationr/w Enumerated Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy 255 notApplicable	.1.3.6.1.4.1.164.3.1.2.9.5.1.7

- For products supporting more than one configuration, the write operation 
into the Table is valid only to the TmpCnfg entry.
- For products that do not support configurations, the write operation 
into the Table will be to agnSigProfileCnfgIdx=1.
The table includes signaling profile parameters for Legacy Profiles.

agnSigProfileEntry row .1.3.6.1.4.1.164.3.1.2.10.1.1

An entry in table.

Indexes

agnSigProfileCnfgIdx agnSigProfileIdx agnSigProfileRxTx

Column	Syntax	OID
agnSigProfileCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. For products supporting more than one configuration,the write operation is valid only to the TmpCnfg. For Gmux2000 t…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.10.1.1.1
agnSigProfileIdx This attribute indicates the Signaling Profile (1..5). For MP-104/204, only Profile=1 will exist.	Integer32 Constraints: range: 1-5	.1.3.6.1.4.1.164.3.1.2.10.1.1.2
agnSigProfileRxTx This attribute indicates if the following objects refer to: Rx or Tx translation. Rx : ML->IO Tx : IO->ML . For MP-104/204, that means: Rx : Signaling to FXS CH Tx : Signaling to E1 Link.	Enumeration Enumerated Values: 1 rx 2 tx	.1.3.6.1.4.1.164.3.1.2.10.1.1.3
agnSigProfileABCD For MP-2100/MP-2200 and for MP-104/204 from R2: This object represents 6 parameters, by 3 Octets : Busy Code-MSB nibble, - applicable only for Rx translation Idle Code- nibble, - applicable only for Rx translation …	OctetStringr/w	.1.3.6.1.4.1.164.3.1.2.10.1.1.4
agnSigProfileEcanActSignal Echo Canceller Activation Signal. This object specifies which BIT (A, B, C, or D) and which value (0 or 1) will be used for the echo canceller activation. The inverse value will cause the deactivation of the echo cancel…	Enumerationr/w Enumerated Values: 1 notApplicable 2 aBit1 3 aBit0 4 bBit1 5 bBit0 6 cBit1 7 cBit0 8 dBit1 9 dBit0	.1.3.6.1.4.1.164.3.1.2.10.1.1.5
agnSigProfileEcanRespDelay Echo Canceller Response Delay. This object specifies the response delay in msec for the activation/deactivation of the echo canceller. The value should be in multiples of 100 msec: 100, 200, 300, ...2000.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.2.10.1.1.6

The write operation into the Table Objects is valid only
to the TmpCnfg entry. This is the general table of signaling profiles.

agnSigProfEntry row .1.3.6.1.4.1.164.3.1.2.10.2.1

An entry in table.

Indexes

agnSigProfCnfgIdx agnSigProfIdx

Column	Syntax	OID
agnSigProfCnfgIdx This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. The write operation is valid only to the TmpCnfg.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.164.3.1.2.10.2.1.1
agnSigProfIdx This attribute indicates the Signaling Profile (1..5).	Integer32 Constraints: range: 1-5	.1.3.6.1.4.1.164.3.1.2.10.2.1.2
agnSigProfName Profile Name given by user.	OctetStringr/w Constraints: range: 0-12	.1.3.6.1.4.1.164.3.1.2.10.2.1.3
agnSigProfType Profile Type. legacy - usual signaling. The parameters for the Legacy Profiles are detailed in the agnSigProfileTable, above. r2Cas - R2 signaling. The parameters for the R2 Profiles are detailed in …	Enumerationr/w Enumerated Values: 1 notApplicable 2 legacy 3 r2Cas	.1.3.6.1.4.1.164.3.1.2.10.2.1.4

General Parameters for voice - system level.

systemVoiceEntry row .1.3.6.1.4.1.164.3.1.2.12.1.1

An entry in table.

Indexes

systemVoiceConfIdx

Column	Syntax	OID
systemVoiceConfIdx This attribute indicates the Idx of the Cnfg (1..100) being accessed - Active or Temporary Configurations. Idx 255 relates to the temporary TmpCnfg. All configurations can be read but only the Temporary can be written …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.12.1.1.1
systemVoiceNationalTone Tone Characteristics (Amplitude, Frequency, delays etc.). These characteristics are defined according to the country.	Enumerationr/w Enumerated Values: 1 notApplicable 2 usa 3 australia 4 brazil 5 canada 6 france 7 germany 8 israel 9 mexico 10 portugal 11 russia 12 spain 13 unitedKingdom 14 czech 15 china	.1.3.6.1.4.1.164.3.1.2.12.1.1.2
systemVoicePacketRate This object indicates the G.729 and G.711 Coders transmitted Packet Rate in milliseconds.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.2.12.1.1.3
systemVoiceFaxSupport This object allows the user to Disable/Enable Fax support.	Enumerationr/w Enumerated Values: 1 notApplicable 2 disable 3 faxRelayT38 4 vbdPassThrou	.1.3.6.1.4.1.164.3.1.2.12.1.1.4
systemVoiceFaxRate This object indicates the Fax Rate limit. It is irrelevant when Fax support is NA or disabled.	Enumerationr/w Enumerated Values: 1 notConnected 2 r4800bps 4 r9600bps 6 r14400bps	.1.3.6.1.4.1.164.3.1.2.12.1.1.5
systemVoiceModemSupport This object allows the user to Disable/Enable Modem support.	Enumerationr/w Enumerated Values: 1 notApplicable 2 disable 3 vbdV152 4 vbdPassThrou	.1.3.6.1.4.1.164.3.1.2.12.1.1.6
systemVoiceCoderAndRate This object indicates the Coder and Rate for the Voice Compression.	Enumerationr/w Enumerated Values: 1 notApplicable 5 g711aLAW 6 g711uLAW	.1.3.6.1.4.1.164.3.1.2.12.1.1.7
systemVoiceEchoCanceler This object indicates the Echo Canceler activation.	Enumerationr/w Enumerated Values: 1 notApplicable 2 disable 3 enable	.1.3.6.1.4.1.164.3.1.2.12.1.1.8
systemVoiceTxGain This object indicates the Transmit Gain (volume) in dB.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.2.12.1.1.9
systemVoiceDtmfRelayMethod This object indicates the DTMF Relay Method that is used to transmit DTMF tones. rfc2833(1) - inband DTMF relay according to RFC-2833. sipInfo(2) - out of band DTMF relay using SIP INFO method.	Enumerationr/w Enumerated Values: 1 rfc2833 2 sipInfo	.1.3.6.1.4.1.164.3.1.2.12.1.1.10
systemVoiceDtmfRelayRxPayloadType This object indicates the Rx Payload Type for DTMF relay RTP packets. It is relevant only when DTMF Relay Method is RFC-2833.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.2.12.1.1.11
systemVoiceDtmfRelayPayloadTypeNeg This object indicates whether Payload Type Negotiation is used (according to RFC-2833) or not. It is relevant only when DTMF Relay Method is RFC-2833.	Enumerationr/w Enumerated Values: 1 notApplicable 2 disable 3 enable	.1.3.6.1.4.1.164.3.1.2.12.1.1.12
systemVoiceDtmfRelayTxPayloadType This object indicates the Tx Payload Type for DTMF relay RTP packets. It is relevant only when the Payload Type Negotiation is disabled.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.2.12.1.1.13

Voice Coders table.

systemVoiceCoderEntry row .1.3.6.1.4.1.164.3.1.2.12.2.1

An entry in Voice Coders table.

Indexes

systemVoiceCoderConfIdx systemVoiceCoderPriority

Column	Syntax	OID
systemVoiceCoderConfIdx The first index of the table. This object might represent the Configuration Index (1..100) being accessed; Index=255 relates to the TmpCnfg. For devices with multiple configurations, Set is permitted to T…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.2.12.2.1.1
systemVoiceCoderPriority This object indicates the Coder's Priority.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.3.1.2.12.2.1.2
systemVoiceCoderCoderAndRate This object indicates the Coder and Rate for the Voice Compression.	Enumerationr/w Enumerated Values: 1 notApplicable 2 g7231r6300BPS 3 g7231r5300BPS 4 g729A8KBPS 5 g711aLAW 6 g711uLAW 255 none	.1.3.6.1.4.1.164.3.1.2.12.2.1.3

A table.

mdlSInstEntry row .1.3.6.1.4.1.164.3.1.3.1.1.1

An entry in table.

Indexes

mdlSInstSltIdx

Column	Syntax	OID
mdlSInstSltIdx A unique number to identify a slot position in the mux. In the ?004 Unit the entries PsB(2),ClB(4),io6(10)..io(16) are not valid. For the Vmux2100 Main Board clA (3) is used.	Enumeration Enumerated Values: 1 psA 2 psB 3 clA 4 clB 5 io1 6 io2 7 io3 8 io4 9 io5 10 io6 11 io7 12 io8 13 io9 14 io10 15 io11 16 io12	.1.3.6.1.4.1.164.3.1.3.1.1.1.1
mdlSInstCardType This attribute indicates the type of card installed in the specific slot position. Only PS cards are possible in the PS slots. Only CL cards are possible in the CL slots. Only IO cards are possible in the IO slots.	Enumeration Enumerated Values: 1 unknown 2 empty 9 acm 10 ps60W 11 ps100W 17 ps 20 cl1 21 clEth 22 cl2 23 cl2Eth 24 cl3 25 cl3Eth 26 cl1Clk 31 mPh1 32 mPh3 33 mPh1T1DSU 34 mPh1T1CSU 35 mPh1E1DSU 36 mPh1E1LTU 37 mtmlFT1 38 mtmlFE1 39 mtmlH4E1 40 mtmlH4E12W 41 mtmlH4T1 42 mtmlH4T12W 43 mtHsh4E1 44 mtHsh4E12W 45 mtHsh4T1 46 mtHsh4T12W 47 mtmlH2E1 48 mtmlH2E12W 49 mtmlH2T1 50 mtmlH2T12W 51 hsh2E1 52 hsh2E12W 53 hsh2T1 54 hsh2T12W 55 mlIp 56 mtml4Ip 57 ml20N1 58 ml20N2 60 mPl6 61 mPl3 62 vf24T1 63 vf30E1 64 vf48T1 65 vf60E1 68 ml2E1 69 ml4E1 70 ml2T1 71 ml4T1 72 mPv4 73 vc16A 74 vc8EandM 75 vc8Fxo 76 vc8Fxs 77 vc16EandM 78 vc16Fxo 79 vc16Fxs 80 vf3EandM 81 vf3Fxs 82 vf3Fxo 83 vfPbx 84 vfPbxT1 85 vfPbxE1 86 mtMlE2S 87 mtMlE2D 88 mtMlF2T1 89 mtMlF2E1 90 mtMlT1Fiber 91 mtMlE1Fiber 92 mtMlT1FiberFb 93 mtMlE1FiberFb 94 mtmlHE1 95 mtmlH1E1 96 mtmlHSE1 97 ml20 98 mtMl4T1 99 mtMl4E1 100 mtMl1T1DSU 101 mtMl1T1CSU 102 mtMl1E1DSU 103 mtMl1E1LTU 104 mtMl1T1DSUfb 105 mtMl1T1CSUfb 106 mtMl1E1DSUfb 107 mtMl1E1LTUfb 108 mtMl2T1 109 mtMl2E1 110 ls2CcittX50 111 ls2CcittX58 112 ls2ATandTSdm 113 ls2ACcittX50 114 ls2ACcittX58 115 ls2AATandTSdm 116 ls2A2Ts 117 ls2M 118 mtMlT1 119 mtMlE1 120 hs2 121 hs3 122 hsq 123 hs703 124 hsQM 125 hsqN 126 hs6 127 hs12 128 hsDp 129 hsp 130 hs4T1 131 hs4E1 132 hs4 133 hsEth 134 ml8T1 135 ml8E1 136 vc2E1 137 vc4E1 138 vc2T1 139 vc4T1 140 vc2EandM 141 vc2Fxs1Plar 142 vc2Fxo1 143 vc2Fxs2 144 vc2Fxo2 145 vc2Fxs3 146 vc2Fxo3 147 vc26EandM 148 mtvc2 149 vc2R2Fxs 150 hsu 151 mbeA 152 mbeB 153 mbeU 154 tre 155 hsuI 156 hsr 157 hss 158 hsu1 159 ls12 160 ls6 161 ls6V1EandM 162 ls6V1Fxo 163 ls6V1Fxs 164 ls6V2EandM 165 ls6V2Fxo 166 ls6V2Fxs 167 ls6VfEandM 168 ls6VfFxo 169 ls6VfFxs 170 vc3EandM 171 vc3Fxo 172 vc3Fxs 173 vcPbx 174 vcPbxT1 175 vcPbxE1 176 vc6EandM 177 vc6Fxo 178 vc6Fxs 179 vcq 180 ls6n 181 mhs1V36 182 mhs1V35 183 mhs1G703 184 mhs1DDS 185 mhs3 186 mhs1X21 187 mhs1V24 188 mhs4 189 mhsE1Hs 190 mhsT1Hs 191 mhsHyE1Hs 192 mhsHyT1Hs 193 mlfHybE1Hs 194 mlfHybT1Hs 195 mhs2e1 196 mhs2t1 197 mhsHy2e1 198 mhsHy2t1 199 mlfHybE12 200 mls6 201 mls3 202 mlHybAtmE1 203 mlHybAtmT1 204 mlfHybT12 205 mvc8 206 mvc8PbxE1 207 mvc8PbxT1Dsu 208 mvc8PbxT1Csu 209 mvc8PbxE1Slave 210 mvc4 211 mvc4PbxE1 212 mvc4PbxT1Dsu 213 mvc4PbxT1Csu 214 mvc4PbxE1Slave 215 mvc4PbxT1Slave 216 mvc8PbxT1Slave 217 mvc8ExtAnalog 218 mvcE1 219 mvcT1 220 mhsS 221 mhsU 222 mhsPriE1 223 mhsPriT1 224 hsEthSwitch 225 mPriE1FramerCcs 226 mPriT1FramerCcs 227 mPriE1SlaveCcs 228 mPriT1SlaveCcs 229 mDualBri 230 vc12EandM 231 vc12Fxo 232 vc12Fxs 233 vc6aEandM 234 vc6aFxo 235 vc6aFxs 236 vc6AgFxo 237 vc6AgFxs 238 vc6a4LB 239 vid 240 hsu12 241 hsu6 242 hss12 243 hss6 244 hsDp3 245 hsDp6 246 hsf1 247 mhsHyE1 248 mhsHyT1 249 mhsIp 250 mlIpHs 251 mlHybIpE1 252 mlHybIpT1 253 mvg1Lan 254 mvg2Lan 255 vc4Fxs 256 vc4EandM 257 vc4Fxo 258 hsf2 260 mvgSwitch4Lan 261 msl4E1W2 262 msl4E1W4 263 msl8E1W2 264 msl4E1W2Eth 265 msl8E1W2Eth 266 asmi54cE1AndEth 267 asmi54cT1AndEth 268 asmi54c 271 hs6N 272 hs12N 273 hsNRZ 281 evc2E1 282 evc4E1 283 evc2T1 284 evc4T1 285 vc2E1Pri 286 vc4E1Pri 291 vc4OmniEandM 292 vc4OmniWestern 301 clx1 302 clx1GbE 303 clx1S155 304 clx1S155GbE 305 ml8T1Eth 306 ml8E1Eth 307 op106cEth 308 op108cEth 309 op106cEthT1 310 op108cEthE1 311 op108cEthE1Unbal 312 mpw1 321 vfs24T1 322 vfs30E1 323 vfs48T1 324 vfs60E1 325 mm4E1 326 mm4T1 327 mm8E1 328 mm8T1 329 mm12E1 330 mm12T1 331 mm16E1 332 mm16T1	.1.3.6.1.4.1.164.3.1.3.1.1.1.2
mdlSHwVersion This attribute indicates the Hardware version of the installed card in the specific slot position.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.164.3.1.3.1.1.1.3
mdlSSwVersion This attribute indicates the Software version of the installed card in the specific slot position.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.164.3.1.3.1.1.1.4
mdlSAlrStatus Indicates the alarm state at module level, i.e. lower level (port alarms) status is not included. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alar…	Enumeration Enumerated Values: 2 off 3 event 4 minor 5 major 6 warning 7 critical	.1.3.6.1.4.1.164.3.1.3.1.1.1.5
mdlSAlrStatusAll Indicates the alarm state in the module-all level, i.e. lower level (port alarms) included. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, …	Enumeration Enumerated Values: 2 off 3 event 4 minor 5 major 6 warning 7 critical	.1.3.6.1.4.1.164.3.1.3.1.1.1.6
mdlSMaskedAlrStat Indicates the alarm state at module level, [i.e. lower level (port alarms) status is not included],including Masked alarms. This attribute will be set to: critical(7) - when there is at least one active (state ON) …	Enumeration Enumerated Values: 2 off 3 event 4 minor 5 major 6 warning 7 critical	.1.3.6.1.4.1.164.3.1.3.1.1.1.7
mdlSMaskedAlrStatAll Indicates the alarm state in the module-all level, i.e. lower level (port alarms) included, including Masked alarms. This attribute will be set to: critical(7) - when there is at least one active (state ON) …	Enumeration Enumerated Values: 2 off 3 event 4 minor 5 major 6 warning 7 critical	.1.3.6.1.4.1.164.3.1.3.1.1.1.8
mdlSTstStatusAll This attribute will be set to on(3) when there is at least one test in progress on a channel of the card, otherwise the value will be off(2).	Enumeration Enumerated Values: 2 off 3 on	.1.3.6.1.4.1.164.3.1.3.1.1.1.9
mdlSClearAlrCmd Setting this command to ON, enforces a clear of all the alarms in the given slot, excluding alarms of port level. The clear operation will not be applied for masked/inverted alarms.	Enumerationr/w Enumerated Values: 2 off 3 on	.1.3.6.1.4.1.164.3.1.3.1.1.1.10
mdlSClearAllAlrCmd Setting this command to ON, enforces a clear of all the alarms in the given slot, including all its ports alarms. The clear operation will not be applied for masked/inverted alarms.	Enumerationr/w Enumerated Values: 2 off 3 on	.1.3.6.1.4.1.164.3.1.3.1.1.1.11
mdlSTemperature Temperature of the card, in Celsius degrees.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.3.1.3.1.1.1.12