RAD-LAG-MIB Table View

A table defining Link Aggregation Groups port association,
and other parameters.

lagEntry row .1.3.6.1.4.1.164.6.2.54.1.1

An entry in the LAG table.

Indexes

lagCnfgIdx lagIdx

Column	Syntax	OID
lagCnfgIdx This object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.164.6.2.54.1.1.1
lagIdx This object indicates LAG unique index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.2.54.1.1.2
lagPortMembers The set of ports which are permanently assigned to the Link Aggregation Group. The default value of this object is a string of zeros.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.164.6.2.54.1.1.3
lagDistributionMethod This object defines the criteria for the 802.3ad (LAG) to split the traffic between ports	Enumerationr/w Enumerated Values: 2 portBased 3 oneToOne 4 sourceMac 5 destinationMac 6 sourceXorDestinationMac 7 sourceAndDestinationMac 8 sourceIp 9 destinationIp 10 sourceAndDestinationMacAndIp 11 roundRobin 12 sourceAndDestinationIp	.1.3.6.1.4.1.164.6.2.54.1.1.4
lagRecoveryMode This object defines whether traffic will be returned to a port after its recovery. This object is applicable only when lagDistributionMethod= oneToOne (3).	Enumerationr/w Enumerated Values: 2 nonRevertive 3 revertive	.1.3.6.1.4.1.164.6.2.54.1.1.5
lagWaitToRestore This object defines traffic recovery time (in seconds) to the port after its recovery. This object is applicable only when lagRecoveryMode= revertive (3).	Unsigned32r/w Constraints: range: 0-720	.1.3.6.1.4.1.164.6.2.54.1.1.6
lagRowStatus This object enables user to create/delete entries of this table. Note: When using LAG standard package, this table is static, hence, only the values active(1), notInService(2) are used.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.2.54.1.1.7
lagShutDownDurationUponFlip This object defines the duration (in seconds) the active port transmission is shut down after LAG Flip occurs. The transmission is shut down and then opened again (after the duration defined by this object), in orde…	Unsigned32r/w Constraints: range: 0-30	.1.3.6.1.4.1.164.6.2.54.1.1.8
lagRdnMethod This object defines the redundancy method.	Enumerationr/w Enumerated Values: 1 loadSharing 2 redundancy	.1.3.6.1.4.1.164.6.2.54.1.1.9
lagLacpEnable Enabling/Disabling the LACP for a LAG. The LACP will be enabled for all ports belonging to this LAG.	Enumerationr/w Enumerated Values: 2 no 3 yes	.1.3.6.1.4.1.164.6.2.54.1.1.10
lagMinimumLinks This object defines the minimum number of active ports in the LAG for it to be considered OK . This object is valid only for Load Sharing LAGs. Default value shall be 1.	Unsigned32r/w Constraints: range: 1-4	.1.3.6.1.4.1.164.6.2.54.1.1.12
lagAnchorPort This object indicates ifIndex of the port selected as Anchor Port.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.164.6.2.54.1.1.13

A table defining Link Aggregation Groups Redundancy. This table is applicable only
when lagDistributionMethod = oneToOne.

lagStatEntry row .1.3.6.1.4.1.164.6.2.54.2.1

An entry in the LAG Status table.

Indexes

lagIdx

Column	Syntax	OID
lagStatForcePort This object enables user to enforce the active port. 0 = No Enforcement; Otherwise the ifIndex of the port.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.2.54.2.1.1
lagStatActivePort This object indicates the current active port. It is applicable only when lagDistributionMethod = oneToOne. The value is the ifIndex of the port. 0 = none of the ports is active.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.2.54.2.1.2

An Augment to the Link Aggregation Control configuration table
(dot3adAggPortTable in IEEE8023-LAG-MIB; IEEE 802.3ad).

dot3adAggPortXEntry row .1.3.6.1.4.1.164.6.2.54.3.1

An entry in the table.

Indexes

No indexes recorded

Column	Syntax	OID
dot3adAggPortXprotectionState This object indicates the state of the LAG protection.	Enumeration Enumerated Values: 1 notApplicable 2 standby 3 active	.1.3.6.1.4.1.164.6.2.54.3.1.1