QTECH-WLAN-FIT-AP-CF-MIB Table View

Column Syntax OID

apSysNEId

Network elements encoding of AP, unifiedly defined by
China Mobile. It's length is not less than 16.

Constraints:
range: 1-16

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.1.1.1.1.1

apSysName

The AP device name, in line with the naming
convention of China Mobile. It's length will not be
longer than 40.

Constraints:
range: 1-40

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.1.1.1.1.2

apStatWindowTime

cpu statistics time set,the units is second,max is 15 minute.

SNMPv2-SMITimeTicksr/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.1.1.1.1.3

apSampleTime

ap sample time set,mini is 2 Second.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.1.1.1.1.4

apRtCollectOnoff

Real-time collection of ap is enabled, 1:on 0:off.

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.27514.1.1.10.2.81.1.1.1.1.5

apSysRestart

restaet system config,0: normal 1:restart.

Enumerationr/w

Enumerated Values:

0	normal
1	restart

.1.3.6.1.4.1.27514.1.1.10.2.81.1.1.1.1.6

apSysReset

rest system config to default config, 0:normal 1:reset .

Enumerationr/w

Enumerated Values:

0	normal
1	reset

.1.3.6.1.4.1.27514.1.1.10.2.81.1.1.1.1.7

apGeneralCfgInfoReadTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1 · 1 row entry · 17 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apGeneralCfgInfoReadTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apGeneralCfgInfoReadTable'

The general information read.

apGeneralCfgInfoReadTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1

The general information configure table.

Indexes

Column	Syntax	OID
apSysDescr ap systerm description detail	SNMPv2-TCDisplayString Constraints: `range: 1-255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1.1`
apSysManufacture ap systerm Manufacture	SNMPv2-TCDisplayString Constraints: `range: 1-255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1.2`
apSerialNumber ap product serial Number	SNMPv2-TCDisplayString Constraints: `range: 1-255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1.3`
apSysModel ap product type Model detail	SNMPv2-TCDisplayString Constraints: `range: 1-255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1.4`
apSysUpTime The run time of the AP.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1.5`
apSysOnlineTime The time of the AP connect to AC.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1.6`
apSysIPAddress The ip of AP.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1.7`
apSysIPNetMask The netmask of the AP ip	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1.8`
apSysGateWayAddr The gate way of the AP	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1.9`
apSysMacAddrConnectToAC The MAC interface of AP which connects with AC.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1.10`
apSoftwareName The software name of the ap system.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1.11`
apSoftwareVersion The software version of the ap system.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1.12`
apSoftwareVendor The software vendor of the ap system.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1.13`
apCPUType The cpu info of ap system.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1.14`
apMemoryType The memory and flash type of ap system.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1.15`
apMemorySize The capability of the memory size.	OctetString	`.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1.17`
apFlashSize The capability of the flash size.	OctetString	`.1.3.6.1.4.1.27514.1.1.10.2.81.1.2.1.1.18`

apGeneralStatusCFGTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.1.3.1 · 1 row entry · 6 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apGeneralStatusCFGTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apGeneralStatusCFGTable'

The status of general information read.

apGeneralStatusCFGTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.1.3.1.1

The general information configure table.

Indexes

apAssoStatusAPMac

Column Syntax OID

apAPName

AP name

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.1.3.1.1.1

apACAssociateStatus

AP associate AC states string
1:associated 0:deassociated

Enumeration

Enumerated Values:

0	deassociate
1	associate

.1.3.6.1.4.1.27514.1.1.10.2.81.1.3.1.1.2

apMonitorMode

ap monitor mode 0:normal 1:monitor 2:SemiMonitor.

Enumerationr/w

Enumerated Values:

0	normal
1	monitor
2	semiMonitor

.1.3.6.1.4.1.27514.1.1.10.2.81.1.3.1.1.3

apAssoStatusAPMac

AP MAC

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.27514.1.1.10.2.81.1.3.1.1.4

apACHbAssocStatus

AP associate back-up AC states string
1:associated 0:deassociated

Enumeration

Enumerated Values:

0	deassociate
1	associate

.1.3.6.1.4.1.27514.1.1.10.2.81.1.3.1.1.5

apScanType

AP scan type
1:scan working channel 0:scan_all

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.1.3.1.1.6

apInterfaceNumberTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.2.1.1 · 1 row entry · 2 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apInterfaceNumberTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apInterfaceNumberTable'

The interface number of ap.

apInterfaceNumberTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.2.1.1.1

The interface number of ap.

Indexes

QTECH-AC-MGMT-MIBqtechApMacAddr apIfLocalRGMIINum

Column	Syntax	OID
apIfNumber The count of the physical interfaces of ap.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.27514.1.1.10.2.81.2.1.1.1.1`
apBSSIDNum bssid number of ap.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.27514.1.1.10.2.81.2.1.1.1.2`

apInterfaceRGMIIconfigTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.2.2.1 · 1 row entry · 9 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apInterfaceRGMIIconfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apInterfaceRGMIIconfigTable'

The interface RGMII config of ap.

apInterfaceRGMIIconfigTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.2.2.1.1

The interface RGMII config of ap

Indexes

Column Syntax OID

apIfLocalRGMIINum

rgmii interface number.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.2.1.1.1

apIfRGMIIDescr

The description of the ap interfaces.

Constraints:
range: 0-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.2.2.1.1.2

apIfRGMIIType

The style of the ap interfaces.

IANAifType-MIBIANAifTyper/w

Type Values:

1	other
2	regular1822
3	hdh1822
4	ddnX25
5	rfc877x25
6	ethernetCsmacd
7	iso88023Csmacd
8	iso88024TokenBus
9	iso88025TokenRing
10	iso88026Man
11	starLan
12	proteon10Mbit
13	proteon80Mbit
14	hyperchannel
15	fddi
16	lapb
17	sdlc
18	ds1
19	e1
20	basicISDN
21	primaryISDN
22	propPointToPointSerial
23	ppp
24	softwareLoopback
25	eon
26	ethernet3Mbit
27	nsip
28	slip
29	ultra
30	ds3
31	sip
32	frameRelay
33	rs232
34	para
35	arcnet
36	arcnetPlus
37	atm
38	miox25
39	sonet
40	x25ple
41	iso88022llc
42	localTalk
43	smdsDxi
44	frameRelayService
45	v35
46	hssi
47	hippi
48	modem
49	aal5
50	sonetPath
51	sonetVT
52	smdsIcip
53	propVirtual
54	propMultiplexor
55	ieee80212
56	fibreChannel
57	hippiInterface
58	frameRelayInterconnect
59	aflane8023
60	aflane8025
61	cctEmul
62	fastEther
63	isdn
64	v11
65	v36
66	g703at64k
67	g703at2mb
68	qllc
69	fastEtherFX
70	channel
71	ieee80211
72	ibm370parChan
73	escon
74	dlsw
75	isdns
76	isdnu
77	lapd
78	ipSwitch
79	rsrb
80	atmLogical
81	ds0
82	ds0Bundle
83	bsc
84	async
85	cnr
86	iso88025Dtr
87	eplrs
88	arap
89	propCnls
90	hostPad
91	termPad
92	frameRelayMPI
93	x213
94	adsl
95	radsl
96	sdsl
97	vdsl
98	iso88025CRFPInt
99	myrinet
100	voiceEM
101	voiceFXO
102	voiceFXS
103	voiceEncap
104	voiceOverIp
105	atmDxi
106	atmFuni
107	atmIma
108	pppMultilinkBundle
109	ipOverCdlc
110	ipOverClaw
111	stackToStack
112	virtualIpAddress
113	mpc
114	ipOverAtm
115	iso88025Fiber
116	tdlc
117	gigabitEthernet
118	hdlc
119	lapf
120	v37
121	x25mlp
122	x25huntGroup
123	transpHdlc
124	interleave
125	fast
126	ip
127	docsCableMaclayer
128	docsCableDownstream
129	docsCableUpstream
130	a12MppSwitch
131	tunnel
132	coffee
133	ces
134	atmSubInterface
135	l2vlan
136	l3ipvlan
137	l3ipxvlan
138	digitalPowerline
139	mediaMailOverIp
140	dtm
141	dcn
142	ipForward
143	msdsl
144	ieee1394
145	if-gsn
146	dvbRccMacLayer
147	dvbRccDownstream
148	dvbRccUpstream
149	atmVirtual
150	mplsTunnel
151	srp
152	voiceOverAtm
153	voiceOverFrameRelay
154	idsl
155	compositeLink
156	ss7SigLink
157	propWirelessP2P
158	frForward
159	rfc1483
160	usb
161	ieee8023adLag
162	bgppolicyaccounting
163	frf16MfrBundle
164	h323Gatekeeper
165	h323Proxy
166	mpls
167	mfSigLink
168	hdsl2
169	shdsl
170	ds1FDL
171	pos
172	dvbAsiIn
173	dvbAsiOut
174	plc
175	nfas
176	tr008
177	gr303RDT
178	gr303IDT
179	isup
180	propDocsWirelessMaclayer
181	propDocsWirelessDownstream
182	propDocsWirelessUpstream
183	hiperlan2
184	propBWAp2Mp
185	sonetOverheadChannel
186	digitalWrapperOverheadChannel
187	aal2
188	radioMAC
189	atmRadio
190	imt
191	mvl
192	reachDSL
193	frDlciEndPt
194	atmVciEndPt
195	opticalChannel
196	opticalTransport
197	propAtm
198	voiceOverCable
199	infiniband
200	teLink
201	q2931
202	virtualTg
203	sipTg
204	sipSig
205	docsCableUpstreamChannel
206	econet
207	pon155
208	pon622
209	bridge
210	linegroup
211	voiceEMFGD
212	voiceFGDEANA
213	voiceDID
214	mpegTransport
215	sixToFour
216	gtp
217	pdnEtherLoop1
218	pdnEtherLoop2
219	opticalChannelGroup
220	homepna
221	gfp
222	ciscoISLvlan
223	actelisMetaLOOP
224	fcipLink
225	rpr
226	qam
227	lmp
228	cblVectaStar
229	docsCableMCmtsDownstream
230	adsl2
231	macSecControlledIF
232	macSecUncontrolledIF
233	aviciOpticalEther
234	atmbond
235	voiceFGDOS
236	mocaVersion1
237	ieee80216WMAN
238	adsl2plus
239	dvbRcsMacLayer
240	dvbTdm
241	dvbRcsTdma
242	x86Laps
243	wwanPP
244	wwanPP2
245	voiceEBS
246	ifPwType
247	ilan
248	pip
249	aluELP
250	gpon
251	vdsl2
252	capwapDot11Profile
253	capwapDot11Bss
254	capwapWtpVirtualRadio
255	bits
256	docsCableUpstreamRfPort
257	cableDownstreamRfPort
258	vmwareVirtualNic
259	ieee802154
260	otnOdu
261	otnOtu
262	ifVfiType
263	g9981
264	g9982
265	g9983
266	aluEpon
267	aluEponOnu
268	aluEponPhysicalUni
269	aluEponLogicalLink
270	aluGponOnu
271	aluGponPhysicalUni
272	vmwareNicTeam
277	docsOfdmDownstream
278	docsOfdmaUpstream
279	gfast
280	sdci
281	xboxWireless
282	fastdsl
283	docsCableScte55d1FwdOob
284	docsCableScte55d1RetOob
285	docsCableScte55d2DsOob
286	docsCableScte55d2UsOob
287	docsCableNdf
288	docsCableNdr
289	ptm
290	ghn
291	otnOtsi
292	otnOtuc
293	otnOduc
294	otnOtsig
295	microwaveCarrierTermination
296	microwaveRadioLinkTerminal
297	ieee8021axDrni
298	ax25
299	ieee19061nanocom
300	cpri
301	omni
302	roe
303	p2pOverLan

.1.3.6.1.4.1.27514.1.1.10.2.81.2.2.1.1.3

apIfRGMIIMtu

The max mtu of the ap interfaces.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.2.1.1.4

apIfRGMIISpeed

The speed of the ap interfaces.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.2.1.1.5

apIfRGMIIPhysAddress

The physical address of the ap interfaces.

apIfRGMIIAdminStatusEnable

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.2.2.1.1.6

The RGMII manage enable ,0 admindown 1 up.

Enumerationr/w

Enumerated Values:

0	admindown
1	up

.1.3.6.1.4.1.27514.1.1.10.2.81.2.2.1.1.7

apIfRGMIIOperStatus

The status of RGMII manage 0:down 1:up 2:admindown

Enumeration

Enumerated Values:

0	down
1	up
2	admindown

.1.3.6.1.4.1.27514.1.1.10.2.81.2.2.1.1.8

apIfRGMIILastChange

The time ap status in now status.

SNMPv2-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.2.2.1.1.9

apInterfaceWirelessconfigTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1 · 1 row entry · 41 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apInterfaceWirelessconfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apInterfaceWirelessconfigTable'

The interface of Wireless config of ap.

apInterfaceWirelessconfigTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1

The interface RGMII config of ap

Indexes

QTECH-AC-MGMT-MIBqtechApMacAddr QTECH-AC-MGMT-MIBqtechApCfgRadioId

Column Syntax OID

apIfWireDescr

The description of the ap interfaces.

Constraints:
range: 0-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.1

apIfWireType

The style of the ap interfaces.

IANAifType-MIBIANAifType

Type Values:

1	other
2	regular1822
3	hdh1822
4	ddnX25
5	rfc877x25
6	ethernetCsmacd
7	iso88023Csmacd
8	iso88024TokenBus
9	iso88025TokenRing
10	iso88026Man
11	starLan
12	proteon10Mbit
13	proteon80Mbit
14	hyperchannel
15	fddi
16	lapb
17	sdlc
18	ds1
19	e1
20	basicISDN
21	primaryISDN
22	propPointToPointSerial
23	ppp
24	softwareLoopback
25	eon
26	ethernet3Mbit
27	nsip
28	slip
29	ultra
30	ds3
31	sip
32	frameRelay
33	rs232
34	para
35	arcnet
36	arcnetPlus
37	atm
38	miox25
39	sonet
40	x25ple
41	iso88022llc
42	localTalk
43	smdsDxi
44	frameRelayService
45	v35
46	hssi
47	hippi
48	modem
49	aal5
50	sonetPath
51	sonetVT
52	smdsIcip
53	propVirtual
54	propMultiplexor
55	ieee80212
56	fibreChannel
57	hippiInterface
58	frameRelayInterconnect
59	aflane8023
60	aflane8025
61	cctEmul
62	fastEther
63	isdn
64	v11
65	v36
66	g703at64k
67	g703at2mb
68	qllc
69	fastEtherFX
70	channel
71	ieee80211
72	ibm370parChan
73	escon
74	dlsw
75	isdns
76	isdnu
77	lapd
78	ipSwitch
79	rsrb
80	atmLogical
81	ds0
82	ds0Bundle
83	bsc
84	async
85	cnr
86	iso88025Dtr
87	eplrs
88	arap
89	propCnls
90	hostPad
91	termPad
92	frameRelayMPI
93	x213
94	adsl
95	radsl
96	sdsl
97	vdsl
98	iso88025CRFPInt
99	myrinet
100	voiceEM
101	voiceFXO
102	voiceFXS
103	voiceEncap
104	voiceOverIp
105	atmDxi
106	atmFuni
107	atmIma
108	pppMultilinkBundle
109	ipOverCdlc
110	ipOverClaw
111	stackToStack
112	virtualIpAddress
113	mpc
114	ipOverAtm
115	iso88025Fiber
116	tdlc
117	gigabitEthernet
118	hdlc
119	lapf
120	v37
121	x25mlp
122	x25huntGroup
123	transpHdlc
124	interleave
125	fast
126	ip
127	docsCableMaclayer
128	docsCableDownstream
129	docsCableUpstream
130	a12MppSwitch
131	tunnel
132	coffee
133	ces
134	atmSubInterface
135	l2vlan
136	l3ipvlan
137	l3ipxvlan
138	digitalPowerline
139	mediaMailOverIp
140	dtm
141	dcn
142	ipForward
143	msdsl
144	ieee1394
145	if-gsn
146	dvbRccMacLayer
147	dvbRccDownstream
148	dvbRccUpstream
149	atmVirtual
150	mplsTunnel
151	srp
152	voiceOverAtm
153	voiceOverFrameRelay
154	idsl
155	compositeLink
156	ss7SigLink
157	propWirelessP2P
158	frForward
159	rfc1483
160	usb
161	ieee8023adLag
162	bgppolicyaccounting
163	frf16MfrBundle
164	h323Gatekeeper
165	h323Proxy
166	mpls
167	mfSigLink
168	hdsl2
169	shdsl
170	ds1FDL
171	pos
172	dvbAsiIn
173	dvbAsiOut
174	plc
175	nfas
176	tr008
177	gr303RDT
178	gr303IDT
179	isup
180	propDocsWirelessMaclayer
181	propDocsWirelessDownstream
182	propDocsWirelessUpstream
183	hiperlan2
184	propBWAp2Mp
185	sonetOverheadChannel
186	digitalWrapperOverheadChannel
187	aal2
188	radioMAC
189	atmRadio
190	imt
191	mvl
192	reachDSL
193	frDlciEndPt
194	atmVciEndPt
195	opticalChannel
196	opticalTransport
197	propAtm
198	voiceOverCable
199	infiniband
200	teLink
201	q2931
202	virtualTg
203	sipTg
204	sipSig
205	docsCableUpstreamChannel
206	econet
207	pon155
208	pon622
209	bridge
210	linegroup
211	voiceEMFGD
212	voiceFGDEANA
213	voiceDID
214	mpegTransport
215	sixToFour
216	gtp
217	pdnEtherLoop1
218	pdnEtherLoop2
219	opticalChannelGroup
220	homepna
221	gfp
222	ciscoISLvlan
223	actelisMetaLOOP
224	fcipLink
225	rpr
226	qam
227	lmp
228	cblVectaStar
229	docsCableMCmtsDownstream
230	adsl2
231	macSecControlledIF
232	macSecUncontrolledIF
233	aviciOpticalEther
234	atmbond
235	voiceFGDOS
236	mocaVersion1
237	ieee80216WMAN
238	adsl2plus
239	dvbRcsMacLayer
240	dvbTdm
241	dvbRcsTdma
242	x86Laps
243	wwanPP
244	wwanPP2
245	voiceEBS
246	ifPwType
247	ilan
248	pip
249	aluELP
250	gpon
251	vdsl2
252	capwapDot11Profile
253	capwapDot11Bss
254	capwapWtpVirtualRadio
255	bits
256	docsCableUpstreamRfPort
257	cableDownstreamRfPort
258	vmwareVirtualNic
259	ieee802154
260	otnOdu
261	otnOtu
262	ifVfiType
263	g9981
264	g9982
265	g9983
266	aluEpon
267	aluEponOnu
268	aluEponPhysicalUni
269	aluEponLogicalLink
270	aluGponOnu
271	aluGponPhysicalUni
272	vmwareNicTeam
277	docsOfdmDownstream
278	docsOfdmaUpstream
279	gfast
280	sdci
281	xboxWireless
282	fastdsl
283	docsCableScte55d1FwdOob
284	docsCableScte55d1RetOob
285	docsCableScte55d2DsOob
286	docsCableScte55d2UsOob
287	docsCableNdf
288	docsCableNdr
289	ptm
290	ghn
291	otnOtsi
292	otnOtuc
293	otnOduc
294	otnOtsig
295	microwaveCarrierTermination
296	microwaveRadioLinkTerminal
297	ieee8021axDrni
298	ax25
299	ieee19061nanocom
300	cpri
301	omni
302	roe
303	p2pOverLan

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.2

apIfWireMtu

The max mtu of the ap interfaces.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.3

apIfWireSpeed

The speed of the ap interfaces.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.4

apIfWirePhysAddress

The physical address of the ap interfaces.

apIfWireAdminStatusEnable

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.5

The RGMII manage enable ,0 up 2 admindown.

Enumerationr/w

Enumerated Values:

0	up
1	admindown

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.6

apIfWireOperStatus

The status of RGMII manage 0:up 1:exception down 2:admindown

Enumeration

Enumerated Values:

0	up
1	down
2	admindown

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.7

apIfWireLastChange

The time ap status in now status.

SNMPv2-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.8

apIfWireChannelAutoSelectEnable

Radio Channel Auto Select Enable 1:on 0:off

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.9

apIfWireRadioChannelConfig

Radio Channel Manual config

apIfWireRadioChannelUsing

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.10

Radio Channel current used

apIfWireCurrRadioModeSupport

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.11

The ap support radio mode.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.12

apIfWireRadioModeConfig

The ap radio mode configure.

apIfWireTransmitSpeedConfig

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.13

The transmit speed of the ap config.

Constraints:
range: 0-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.14

apIfWireMaxTxPwrLvl

The max Tx power Level config.

Constraints:
range: 0-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.15

apIfWirePwrAttRange

The Tx Power attenuation range of ap radio

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.16

apIfWirePwrAttValue

The Radio Tx Power attenuation value config

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.17

apIfWireAntennaGain

The Radio Antenna Gain

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.18

apIfWirePowerMgmtEnable

The Tx Power Auto mangement config

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.19

apTxPwr

The Tx power

apIfWireMaxStationNumPermitted

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.20

The max permit station Num configure.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.21

apIfWireAMPDUEnabled

The A-MPDU enable ,used for 11n, 0:off 1:on

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.22

apIfWireBWMode

The radio bandwith mode set 20M/40M ,1:on 0:off

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.23

apIfWireShortGIEnabled

The short GI enable ,used for 11n. 1:on 0:off

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.24

apIfWireIs11nOnly

The only used for 11n config .

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.25

apIfWireBeaconIntvl

AP beacon interval time config ,default 100 microsecond.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.26

apIfWireDtimIntvl

AP Dtim information interval time config.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.27

apIfWireRtsThreshold

AP RTX threshold config.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.28

apIfWireFragThreshlod

MSDU Frag Threshlod config.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.29

apIfWirePreambleLen

AP preamble mode config, 0:long 1:short

Enumerationr/w

Enumerated Values:

0	long
1	short

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.30

apAntennaReceiveMask

Antenna receive mask.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.31

apAntennaTransmitMask

Antenna transmit mask.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.32

apIfWireAMSDUEnabled

ap wireless AMSDU Enable.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.33

apIfwireMcsSuppIndex

ap wireless Support Mcs Index.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.34

apIfwireMcsMandIndex

ap wireless Mandory Mcs Index.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.35

apIfwire11nSuppEnable

ap wireless 11nsupport enable.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.36

apShtRetryThld

ap wireless short retry times.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.37

apLongRetryThld

ap wireless long retry times.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.38

apIfWireResponseRssi

ap radio response rssi.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.39

apIfWireMaxStationLimit

ap radio limit the num of associated stations.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.40

apIfWireLinkscan

ap radio link scan.

apSSIDAPMac apSSIDRadioId QTECH-AC-MGMT-MIBqtechApgWlanId

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.2.3.1.1.41

apSSIDListCreateTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.3.1 · 1 row entry · 5 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apSSIDListCreateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apSSIDListCreateTable'

The SSID list manegment for ap.

apSSIDListCreateTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.3.1.1

The SSID list manegment for ap

Indexes

Column Syntax OID

apSSIDAPMac

AP mac address

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.3.1.1.1

apSSIDRadioId

ssid connect radio index num.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.3.1.1.2

apSSIDListName

SSID name.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.3.1.1.3

apListBSSIDAddr

config bssid virtual mac address

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.3.1.1.4

apSSIDListStatus

The status column used for creating and
deleting instances of the columnar objects in the table.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.27514.1.1.10.2.81.3.1.1.5

apSSIDConfigTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.3.2 · 1 row entry · 14 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apSSIDConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apSSIDConfigTable'

The SSID config of ap.

apSSIDConfigTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.3.2.1

The SSID config of ap

Indexes

Column Syntax OID

apSSIDName

config ssid name

Constraints:
range: 1-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.3.2.1.1

apSSIDEnabled

ssid enable config

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.3.2.1.2

apSSIDHidden

ssid hidden config

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.3.2.1.3

apStaIsolate

station isolate config

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.3.2.1.4

apDot11Auth

dot11 authenticate mode 0:opensystem 1:sharedkey.

Enumerationr/w

Enumerated Values:

0	opensystem
1	sharedkey

.1.3.6.1.4.1.27514.1.1.10.2.81.3.2.1.5

apsecurityMode

security mode config 0:none 1:wpa
2:wpa2 3:wapi.

Enumerationr/w

Enumerated Values:

0	none
1	wpa
2	wpa2
3	wapi

.1.3.6.1.4.1.27514.1.1.10.2.81.3.2.1.6

apAuthenMode

dot11 authen mode 0:none 1:PSK 2:Radius 3:WAPICER 4:Web 5:PSK-Web 6:WAPICER-Web 7:WAPIPSK.

Enumerationr/w

Enumerated Values:

0	none
1	psk
2	radius
3	wapicer
4	web
5	psk-web
6	wapicer-web
7	wapipsk

.1.3.6.1.4.1.27514.1.1.10.2.81.3.2.1.7

apSecurityCiphers

SecurityCiphers config 0:none 1:wep40
2:wep104 3:aesccmp 4:wpi-SMS4.

Enumerationr/w

Enumerated Values:

0	none
1	wep40
2	wep104
3	tkip
4	aesccmp
5	wapisms4

.1.3.6.1.4.1.27514.1.1.10.2.81.3.2.1.8

apVlanId

vlan id config

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.3.2.1.9

apVlanIpAddr

vlan ip address

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.27514.1.1.10.2.81.3.2.1.10

apMaxSimultUsers

AP max station support config.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.3.2.1.11

apStaUplinkMaxRate

AP station Uplink MaxRate.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.3.2.1.12

apStaDwlinkMaxRate

AP station Dwlink MaxRate.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.3.2.1.13

apSSIDCfgStatus

The status column used for creating and
deleting instances of the columnar objects in the table.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.3.2.1.14

apSecurityConfigTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.4.1 · 1 row entry · 8 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apSecurityConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apSecurityConfigTable'

The SSID config of ap.

apSecurityConfigTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.4.1.1

The SSID config of ap

Indexes

Column Syntax OID

apWEPCipherKeyIndex

WEP CipherKey Index

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.4.1.1.1

apWEPCipherKeyValue

WEP cipherKey value .

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.4.1.1.2

apWEPCipherKeyCharType

WEP CipherKey type 0:char 1:hex .

Enumerationr/w

Enumerated Values:

0	hex
1	char

.1.3.6.1.4.1.27514.1.1.10.2.81.4.1.1.3

apPSKCipherKeyValue

PSK cipherKey value .

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.4.1.1.4

apPSKCipherKeyCharType

PSK CipherKey type 0:char 1:hex .

Enumerationr/w

Enumerated Values:

0	hex
1	char

.1.3.6.1.4.1.27514.1.1.10.2.81.4.1.1.5

apWAPIAuthModeEnable

WAPI auth mode switch.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.4.1.1.6

apWAPIASIPAddress

The WAPI AS ip address

SNMPv2-SMIIpAddressr/w

Type Constraints:
range: 4

.1.3.6.1.4.1.27514.1.1.10.2.81.4.1.1.7

apWAPIIsInstalledCer

WAPI has installed Cet ?

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.4.1.1.8

apWAPIExternInfoConfigTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1 · 1 row entry · 40 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apWAPIExternInfoConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apWAPIExternInfoConfigTable'

The WAPI extern config .

apWAPIExternInfoConfigTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1

The WAPI extern config .

Indexes

Column Syntax OID

apWAPIConfigVersion

the newest wapi version the entity support.

apWAPIControlledAuthControl

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.1

This attribute means whether the entity enbales identification. If its value is false, it
means it disables identification, the status of the controlled port is 'identified'. If
true, it means it enables identification,…

apWAPIControlledPortControl

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.2

This attribute used as the control type of the entity port, valid when gb15629dot11wapiControlledAuthControl
is true. It mean 'auto' when 0 and the status of control port is decided by the result of
identification. 'fo…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.3

apWAPIOptionImplemented

This attribute instruts whether the entity supports the WAPI funtion. It supports the WAPI
funtion when value is true. Or not support.

apWAPIPreauthenticationImplemented

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.4

This attribute instruts whether the entity supports the WAPI pre-identification. It can't
be valued true except that gb15629dot11wapiOptionImplemented is valued true.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.5

apWAPIEnabled

When it is valued true, the object instruts that the WAPI of the entity has been activated.
The entity will broadcast the WAPI info elemnetds by beacon frames and probe response frames.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.6

apWAPIPreauthEnabled

When it is valued true, the object instruts that the WAPI of the entity has been activated.
The object requires thar the dot11WAPI Enabled is also set to true.

apWAPIUnicastKeysSupported

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.7

The object instruts the count of the unicast keys supported by the WAPI entity.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.8

apWAPIUnicastRekeyMethod

The object choosee a mechanism to rebuild USK of WAPI. It is defaultly based on time,
once per day. The update of USK is initialized by the entities which play as the role of AE
or ASUE.

Enumerationr/w

Enumerated Values:

0	disabled
1	timeBased
2	packetBased
3	timepacket-Based

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.9

apWAPIUnicastRekeyTime

The timing-Second of the update of WAPI USK. The timer BEGINS working when the USK is
set by the primitive MLME-SETWPIKEYS.request.

secondUnsigned32r/w

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.10

apWAPIUnicastRekeyPackets

The packet count of the update of WAPI USK(unit in 1000 packets). Thr counter BEGINS
working to account the count of the packets which used the current USK, when the USK is set
by the primitive MLME-SETWPIKEYS.request.

1000 packetsUnsigned32r/w

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.11

apWAPIMulticastCipher

The object instruts the muticast cipher suites which entities should adopt. The unicast
cipher suites of WAPI info-elements should adopt the value of this variable, which includes
three OCTET OUI and an identification o…

OctetStringr/w

Constraints:
range: 4-4

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.12

apWAPIMulticastRekeyMethod

The object choosee a mechanism to rebuild MSK of WAPI. It is defaultly timebased, once per
day. The update of MSK is initialized by the entity which play the role of AE.

Enumerationr/w

Enumerated Values:

0	disabled
1	timeBased
2	packetBased
3	timepacket-Based

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.13

apWAPIMulticastRekeyTime

The timing-Second of the update of WAPI MSK. The timer BEGINS working when the MSK is
set by the primitive MLME-SETWPIKEYS.request.

secondUnsigned32r/w

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.14

apWAPIMulticastRekeyPackets

The packet count of the update of WAPI MSK(unit in 1000 packets). Thr counter BEGINS
working to account the count of the packets which used the current MSK, when the MSK is set
by the primitive MLME-SETWPIKEYS.request.

1000 packetsUnsigned32r/w

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.15

apWAPIMulticastRekeyStrict

The object will send signal to notify that the MSK need update, whenever the STA leave the
BSS which owns MSK.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.16

apWAPIPSKValue

Choose the PSK of the AKM suite of WAPI as the module of PSK. BK will be derivated by this
object. This object is logically write-only. Reading the variable will return the status of
unsuccessfull, meaningless or 0.

OctetStringr/w

Constraints:
range: 32-32

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.17

apWAPIPSKPassPhrase

Choose the PSK of the AKM suite of WAPI as the module of PSK. BK is set by
gb15629dot11wapiConfigPSKValue. Another alternative method is that using password-key
algorithm to set PSK. This variable provides a way to ent…

apWAPICertificateUpdateCount

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.18

In each handshake of the identification of each certificate, retrans of WAPI certificate
identification handshake protocol messages.

Unsigned32r/w

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.19

apWAPIMulticastUpdateCount

In each handshake of MSK, retrans of WAPI muticast key handshake protocol messages.

Unsigned32r/w

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.20

apWAPIUnicastUpdateCount

The retrans of the WAPI unicast key handshake protocol messages in the three times
handshakes.

Unsigned32r/w

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.21

apWAPIMulticastCipherSize

The object instruts the bits of the muticast key. For example SMS4, the length should be
256. A 128-bit encryption keys for the front, followed by 128-bit key for the integrity
check.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.22

apWAPIBKLifetime

At the buffering of BK, the maximum lifetime of a BK.

secondUnsigned32r/w

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.23

apWAPIBKReauthThreshold

Before the re-certification identification, the percentage of survival of the BK
should be preceded.

percentageUnsigned32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.24

apWAPISATimeout

The maximum time neededto establish Security association.

secondUnsigned32r/w

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.25

apWAPIAuthSuiteSelected

AKM suite of the last consultation.

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.26

apWAPIUnicastCipherSelected

Unicast cipher suites of the last consultation.

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.27

apWAPIMulticastCipherSelected

Muticast cipher suites of the last consultation.

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.28

apWAPIBKIDUsed

The BKID used in the process of last unicast key handshake.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.29

apWAPIAuthSuiteRequested

AKM suite of the last requirements.

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.30

apWAPIUnicastCipherRequested

Unicast cipher suites of the last requirements.

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.31

apWAPIMulticastCipherRequested

Muticast cipher suites of the last requirements.

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.32

apWAPIUnicastCipher

wapi select Unicast encrypt.

OctetString

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.33

apWAPIUnicastCipherEnabled

wapi Unicast encrypt enable.

apWAPIAuthenticationSuite

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.34

apWAPIUnicastCipherSize

wapi Unicast encrypt bit len.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.35

wapi select AKM .

OctetString

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.36

apWAPIAuthenticationSuiteEnabled

wapi AKM encrypt enable.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.37

apWAPIAECertFile

the file name of AE cert in WAPI.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.38

apWAPICACertFile

the file name of CA cert in WAPI.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.39

apWAPIASUCertFile

the file name of ASU cert in WAPI.

QTECH-AC-MGMT-MIBqtechStaMacAddr

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.5.1.1.40

apStationInfoGetTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1 · 1 row entry · 17 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apStationInfoGetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apStationInfoGetTable'

The SSID config of ap.

apStationInfoGetTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1

The SSID config of ap

Indexes

Column Syntax OID

apStaMAC

station mac addr number.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1.1

apStaWMMAttr

QOS config support 0:WMMSta 1:NonWMMSta Index number.

Enumeration

Enumerated Values:

0	nonwmmsta
1	wmmsta

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1.2

apStaIPAddress

station ip address.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1.3

apStaRadioMode

station radio mode 0:dot11a 1:dot11b
2:dot11g 3:dot11n

Enumeration

Enumerated Values:

0	dot11a
1	dot11b
2	dot11g
3	dot11n

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1.4

apStaRadioChannel

station radio channel

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1.5

apAPTxRates

station current rate

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1.6

apStaPowerSaveMode

station power States 0:Active 1:Powersave .

Enumeration

Enumerated Values:

0	active
1	powersave

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1.7

apStaVlanId

station vlan id .

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1.8

apStaSSIDName

station name .

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1.9

apAPId

ap id which station connectted .

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1.10

apStaDot11Auth

station dot11 auth 0:opensystem 1:sharedkey.

Enumeration

Enumerated Values:

0	opensystem
1	sharedkey

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1.11

apsecurity

station dot11 apsecurity 0:none 1:wpa 2:wpa2 3:wapi.

Enumeration

Enumerated Values:

0	none
1	wpa
2	wpa2
3	wapi

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1.12

apStaAuthenMode

station AuthenMode 0:none 1:PSK 2:Radius 3:WAPICER 4:Web 5:PSK-Web 6:WAPICER-Web 7:WAPIPSK.

Enumeration

Enumerated Values:

0	none
1	psk
2	radius
3	wapicer
4	web
5	psk-web
6	wapicer-web
7	wapipsk

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1.13

apStaSecurityCiphers

station SecurityCiphers 0:none 1:wep40
2:wep104 3:tkip 4:aesccmp 5:wpi-SMS4

Enumeration

Enumerated Values:

0	none
1	wep40
2	wep104
3	tkip
4	aesccmp
5	wpisms4

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1.14

apAPIdMac

ap Mac which station connectted .

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1.15

apStaMode

1:dot11a 2:dot11b 4:dot11g 8:dot11an 16:dot11gn

Enumeration

Enumerated Values:

1	dot11a
2	dot11b
4	dot11g
8	dot11an
16	dot11gn

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1.16

apStaBand

sta band 0:2.4G 1:5G

QTECH-AC-MGMT-MIBqtechApMacAddr apUserMacAddress

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.6.1.1.17

apStationRefusedAccessTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.6.2 · 1 row entry · 4 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apStationRefusedAccessTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apStationRefusedAccessTable'

The refused accessed STA infomation.

apStationRefusedAccessTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.6.2.1

The refused accessed STA infomation.

Indexes

apRefusedStaMAC

Column	Syntax	OID
apRefusedStaMAC Refused station MAC.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.27514.1.1.10.2.81.6.2.1.1`
apFailReason Sation refused reason.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.6.2.1.2`
apRefusedTime Sation refused time	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.6.2.1.3`
apRefusedAPMac Sation refused AP MAC	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.27514.1.1.10.2.81.6.2.1.4`

apStationRadiusInfoTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.6.3 · 1 row entry · 5 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apStationRadiusInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apStationRadiusInfoTable'

The Stations Radius Auth infomation.

apStationRadiusInfoTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.6.3.1

The refused accessed STA infomation.

Indexes

Column	Syntax	OID
apUserMacAddress User MAC Address.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.27514.1.1.10.2.81.6.3.1.1`
apUserIpAddress User Ip Address.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.27514.1.1.10.2.81.6.3.1.2`
apUserLoginName User Login Name	OctetString	`.1.3.6.1.4.1.27514.1.1.10.2.81.6.3.1.3`
apUserLoginTime User Login Time	OctetString	`.1.3.6.1.4.1.27514.1.1.10.2.81.6.3.1.4`
apUserOnlineTime User Online Time	SNMPv2-SMITimeTicks Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.6.3.1.5`

apQOSWirelessConfigTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.7.1.1 · 1 row entry · 5 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apQOSWirelessConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apQOSWirelessConfigTable'

ap wireless QOS parameter config table.

apQOSWirelessConfigTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.7.1.1.1

ap wireless QOS parameter config table.

Indexes

QTECH-AC-MGMT-MIBqtechApMacAddr QTECH-AC-MGMT-MIBqtechApCfgRadioId apWireQoSTrafficClassId

Column Syntax OID

apWireQoSTrafficClassId

ap QOS Service type 0:bestEffort 1:background 2:video 3:voice.

Enumeration

Enumerated Values:

0	bestEffort
1	background
2	video
3	voice

.1.3.6.1.4.1.27514.1.1.10.2.81.7.1.1.1.1

apWireQosAIFS

ap QOS AIFS .

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.1.1.1.2

apWireQoSCWmin

ap QOS WM min .

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.1.1.1.3

apWireQoSCWmax

ap QOS WM max .

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.1.1.1.4

apWireQoSTXOPLim

ap QOS TXOP limit .

QTECH-AC-MGMT-MIBqtechApMacAddr QTECH-AC-MGMT-MIBqtechApCfgRadioId

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.1.1.1.5

apQOSBaseInfoConfigTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1 · 1 row entry · 25 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apQOSBaseInfoConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apQOSBaseInfoConfigTable'

ap wireless QOS parameter config table.

apQOSBaseInfoConfigTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1

ap base QOS parameter config table.

Indexes

Column Syntax OID

apBaseQoSTrafficClass

ap QOS Base Traffic type 0:background 1:bestEffort 2:video 3:voice.

Enumerationr/w

Enumerated Values:

0	background
1	bestEffort
2	video
3	voice

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.1

apBaseQoSEnabled

ap Base QOS enable or disable.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.2

apBaseQoSBW

ap Base QOS base service bandwidth.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.3

apBaseQoSResPercent

ap Base QOS base service Resource percent.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.4

apBaseQoSsharedBW

ap Base QOS share service bandwidth.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.5

apBaseQoSsharedBWPercent

ap Base QOS share service Resource percent.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.6

apBaseQoSSchedAlgName

ap Base QOS service schedule name.

apBaseQoSResPolicyEnabled

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.7

ap Base QOS Resource Policy enable.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.8

apBaseQoSResPolicyName

ap Base QOS Resource Policy name.

apBaseQoSBackgroundSvcAvgSpeed

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.9

ap Base QOS background service average speed.

apBaseQoSBackgroundSvcMaxBurst

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.10

ap Base QOS background service busrt max speed.

apBaseQoSBackgroundSvcPriority

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.11

ap Base QOS background service schedule Priority.

apBaseQoSBackgroundSvcResPriority

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.12

ap Base QOS background despoil Priority.

apBaseQoSBestEffortSvcAvgSpeed

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.13

ap Base QOS BestEffort service average speed.

apBaseQoSBestEffortSvcMaxBurst

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.14

ap Base QOS BestEffort service MAX burst speed.

apBaseQoSBestEffortSvcPriority

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.15

ap Base QOS BestEffort service schedule Priority.

apBaseQoSBestEffortSvcResPriority

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.16

ap Base QOS BestEffort despoil Priority.

apBaseQoSVoiceSvcAvgSpeed

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.17

ap Base QOS voice service average speed.

apBaseQoSVoiceSvcMaxBurst

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.18

ap Base QOS voice service MAX burst speed.

apBaseQoSVoiceSvcPriority

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.19

ap Base QOS voice service schedule Priority.

apBaseQoSVoiceSvcResPriority

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.20

ap Base QOS voice service despoil Priority.

apBaseQoSVideoSvcAvgSpeed

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.21

ap Base QOS video service average speed.

apBaseQoSVideoSvcMaxBurst

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.22

ap Base QOS video service MAX burst speed.

apBaseQoSVideoSvcPriority

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.23

ap Base QOS video service schedule Priority.

apBaseQoSVideoSvcResPriority

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.24

ap Base QOS video service despoil Priority.

QTECH-AC-MGMT-MIBqtechApMacAddr QTECH-AC-MGMT-MIBqtechApCfgRadioId

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.2.1.1.25

apQOSBackgroundCfgTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.7.3.1 · 1 row entry · 5 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apQOSBackgroundCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apQOSBackgroundCfgTable'

ap  QOS Background service parameter config table.

apQOSBackgroundCfgTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.7.3.1.1

ap QOS Background service parameter config table.

Indexes

Column Syntax OID

apQOSBgMaxSvcCnt

ap QOS BackGroud service apposition max count.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.3.1.1.1

apQOSBgSvcBW

ap QOS BackGroud service bandwidth limit.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.3.1.1.2

apQOSBgSvcBWPercent

ap QOS BackGroud service bandwidth percent.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.3.1.1.3

apQOSBgIsUseWREDAlg

ap QOS BackGroud service used WRED arithmetic.

apQOSBgIsUseTrafficShaping

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.7.3.1.1.4

ap QOS BackGroud service used Traffic Shaping.

QTECH-AC-MGMT-MIBqtechApMacAddr QTECH-AC-MGMT-MIBqtechApCfgRadioId

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.7.3.1.1.5

apQOSBestEffortCfgTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.7.4.1 · 1 row entry · 5 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apQOSBestEffortCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apQOSBestEffortCfgTable'

ap  QOS BestEffort service parameter config table.

apQOSBestEffortCfgTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.7.4.1.1

ap QOS BestEffort service parameter config table.

Indexes

Column Syntax OID

apQOSBeMaxSvcCnt

ap QOS BestEffort service apposition max count.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.4.1.1.1

apQOSBeSvcBW

ap QOS BestEffort service bandwidth limit.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.4.1.1.2

apQOSBeSvcBWPercent

ap QOS BestEffort service bandwidth percent.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.4.1.1.3

apQOSBeIsUseWREDAlg

ap QOS BestEffort service used WRED arithmetic.

apQOSBeIsUseTrafficShaping

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.7.4.1.1.4

ap QOS BestEffort service used Traffic Shaping.

QTECH-AC-MGMT-MIBqtechApMacAddr QTECH-AC-MGMT-MIBqtechApCfgRadioId

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.7.4.1.1.5

apQOSVoiceInfoCfgTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.7.5.1 · 1 row entry · 9 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apQOSVoiceInfoCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apQOSVoiceInfoCfgTable'

ap  QOS voice service parameter config table.

apQOSVoiceInfoCfgTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.7.5.1.1

ap QOS voice service parameter config table.

Indexes

Column Syntax OID

apQOSVoiceMaxSvcCnt

ap QOS Voice service apposition max count.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.5.1.1.1

apQOSVoiceSvcBW

ap QOS Voice service bandwidth limit.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.5.1.1.2

apQOSVoiceSvcBWPercent

ap QOS Voice service bandwidth percent.

apQOSVoiceIsUseStreamBasedQueue

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.5.1.1.3

ap QOS Voice Stream Based Queue enable.

apQOSVoiceStreamMaxQueueLen

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.7.5.1.1.4

ap QOS Voice Stream Max Queue lenth.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.5.1.1.5

apQOSVoiceStreamAvgSpeed

ap QOS Voice Stream average speed.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.5.1.1.6

apQOSVoiceStreamMaxBurst

ap QOS Voice Stream Max Burst speed.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.5.1.1.7

apQOSVoiceIsUseWREDAlg

ap QOS Voice service used WRED arithmetic.

apQOSVoiceIsUseTrafficShaping

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.7.5.1.1.8

ap QOS Voice service used Traffic Shaping.

QTECH-AC-MGMT-MIBqtechApMacAddr QTECH-AC-MGMT-MIBqtechApCfgRadioId

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.7.5.1.1.9

apQOSVideoInfoCfgTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.7.6.1 · 1 row entry · 9 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apQOSVideoInfoCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apQOSVideoInfoCfgTable'

ap  QOS Video service parameter config table.

apQOSVideoInfoCfgTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.7.6.1.1

ap QOS Video service parameter config table.

Indexes

Column Syntax OID

apQOSVideoMaxSvcCnt

ap QOS Video service apposition max count.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.6.1.1.1

apQOSVideoSvcBW

ap QOS Video service bandwidth limit.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.6.1.1.2

apQOSVideoSvcBWPercent

ap QOS Video service bandwidth percent.

apQOSVideoIsUseStreamBasedQueue

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.6.1.1.3

ap QOS Video Stream Based Queue enable.

apQOSVideoStreamMaxQueueLen

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.7.6.1.1.4

ap QOS Video Stream Max Queue lenth.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.6.1.1.5

apQOSVideoStreamAvgSpeed

ap QOS Video Stream average speed.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.6.1.1.6

apQOSVideoStreamMaxBurst

ap QOS Video Stream Max Burst speed.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.6.1.1.7

apQOSVideoIsUseWREDAlg

ap QOS Video service used WRED arithmetic.

apQOSVideoIsUseTrafficShaping

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.7.6.1.1.8

ap QOS Video service used Traffic Shaping.

QTECH-AC-MGMT-MIBqtechApMacAddr QTECH-AC-MGMT-MIBqtechApCfgRadioId

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.7.6.1.1.9

apQOSWMMConfigTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1 · 1 row entry · 28 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apQOSWMMConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apQOSWMMConfigTable'

ap  QOS Video service parameter config table.

apQOSWMMConfigTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1

ap Radio WMM parameter config table.

Indexes

Column Syntax OID

apQOSMode

QOS Mode 0:none 1:wmm 2:80211.e 3:wmm & 80211.e .

Enumeration

Enumerated Values:

0	none
1	wmm
2	dot8011e
3	wmm80211e

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.1

apQOSUpdateSeq

apQOSUpdateSeq.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.2

apQOSSvpAcIndex

apQOSSvpAcIndex.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.3

apQOSUapsd

apQOSUapsd.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.4

apQOSAcIndx1

apQOSAifsn1.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.5

apQOSAcIndx2

apQOSAifsn2.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.6

apQOSAcIndx3

apQOSAifsn3.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.7

apQOSAcIndx4

apQOSAcIndx4.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.8

apQOSAifsn1

apQOSAifsn1.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.9

apQOSAifsn2

apQOSAifsn2.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.10

apQOSAifsn3

apQOSAifsn3.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.11

apQOSAifsn4

apQOSAifsn4.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.12

apQOSEcwMin1

apQOSEcwMin1.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.13

apQOSEcwMin2

apQOSEcwMin2.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.14

apQOSEcwMin3

apQOSEcwMax1.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.15

apQOSEcwMin4

apQOSEcwMax1.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.16

apQOSEcwMax1

apQOSEcwMax1.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.17

apQOSEcwMax2

apQOSEcwMax2.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.18

apQOSEcwMax3

apQOSEcwMax3.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.19

apQOSEcwMax4

apQOSEcwMax4.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.20

apQOSTxopLmt1

apQOSTxopLmt3.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.21

apQOSTxopLmt2

apQOSTxopLmt3.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.22

apQOSTxopLmt3

apQOSTxopLmt3.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.23

apQOSTxopLmt4

apQOSTxopLmt4.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.24

apQOSAcmAndAck1

apQOSAcmAndAck1.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.25

apQOSAcmAndAck2

apQOSAcmAndAck2.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.26

apQOSAcmAndAck3

apQOSAcmAndAck3.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.27

apQOSAcmAndAck4

apQOSAcmAndAck2.

RFC1213-MIBifIndex QTECH-AC-MGMT-MIBqtechApgWlanId

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.7.7.1.1.28

apVLANConfigTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.9.1 · 1 row entry · 2 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apVLANConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apVLANConfigTable'

ap vlan config table.

apVLANConfigTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.9.1.1

ap vlan config table.

Indexes

Column Syntax OID

apVLANID

ap Memory usage bigger this param,them send trap.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.9.1.1.1

apVlanCfgStatus

The status column used for creating and
deleting instances of the columnar objects in the table.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.9.1.1.2

apSysCapabilityStatisticsTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.10.1.1 · 1 row entry · 4 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apSysCapabilityStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apSysCapabilityStatisticsTable'

ap system Capability Statistics info table.

apSysCapabilityStatisticsTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.10.1.1.1

ap system Capability Statistics info table.

Indexes

Column	Syntax	OID
apCPURTUsage ap CPU real time usage .	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.1.1.1.1`
apCPUAvgUsage ap CPU average usage .	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.1.1.1.2`
apMemRTUsage ap Memory real time usage .	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.1.1.1.3`
apMemAvgUsage ap Memory average usage .	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.1.1.1.4`

apLinkStatisticsTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1 · 1 row entry · 24 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apLinkStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apLinkStatisticsTable'

ap Links Statistics info table.

apLinkStatisticsTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1

ap Links Statistics info table.

Indexes

QTECH-AC-MGMT-MIBqtechApMacAddr apRGMIIIndex

Column	Syntax	OID
apStationAssocSum Station Assocate Sum.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.1`
apStationOnlineSum Station Online Sum.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.2`
apAssocTimes Station Assocate times.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.3`
apAssocFailTimes Station Assocate fail times.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.4`
apReassocTimes Station reAssocate times.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.5`
apPreAssCannotShiftDeassocFailSum .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.6`
apApStatsDisassociated STA deassociation times	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.7`
apAssocRejectSum Total association reject times.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.8`
apBSSNotSupportAssocFailSum Total association fail times due to sta not support.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.9`
apApAuthReqTimes receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.10`
apApAuthSuccessTimes receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.11`
acApAuthReqFailTimes user auth request fail times.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.12`
apReassocFailTimes user reassociation fail times.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.13`
apRSSILowAssocFailSum association fail times due to low rssi.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.14`
apUnknowReasonAssoFailSum association fail times unkonw reason.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.15`
apOut80211StandardAssocFailSum association fail times reason out of the 80211 standard defined.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.16`
apAllStationsTotalUpTime all stations in ap total up time.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.17`
apAssocRespTimes association response times.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.18`
apAssocSuccTimes association success times.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.19`
apUserRadiusOnlineSum Radius User Online Sum.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.20`
apAllUserOnlineTime Radius User Total Up Times.	SNMPv2-SMITimeTicks Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.21`
apRadiusAuthTimes Radius Auth Times.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.22`
apRadiusAuthSuccTimes Radius Auth Success Times.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.23`
apRadiusAuthFailTimes Radius Auth Fail Times.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.2.1.1.24`

apInterfaceRGMIIStatisticsTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.10.3.1 · 1 row entry · 12 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apInterfaceRGMIIStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apInterfaceRGMIIStatisticsTable'

ap RGMII interface Statistics info table.

apInterfaceRGMIIStatisticsTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.10.3.1.1

ap RGMII interface Statistics info table.

Indexes

Column	Syntax	OID
apRGMIIIndex local RGMII index .	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.3.1.1.1`
apifInUcastPkts RGMII Receive Ucast packets .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.3.1.1.2`
apifInNUcastPkts RGMII Receive broadcast packets .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.3.1.1.3`
apifInOctets RGMII Receive bytes .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.3.1.1.4`
apifInDiscardPkts RGMII drop Receive packets .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.3.1.1.5`
apifInErrors RGMII error Receive packets .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.3.1.1.6`
apifOutUcastPkts RGMII Send Ucast packets .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.3.1.1.7`
apifOutNUcastPkts RGMII Send broadcast packets .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.3.1.1.8`
apifOutOctets RGMII Send bytes .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.3.1.1.9`
apifOutDiscardPkts RGMII drop Send packets .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.3.1.1.10`
apifOutErrors RGMII error Send packets .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.3.1.1.11`
apifUpDwnTimes RGMII upDown Times .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.3.1.1.12`

apInterfaceWireStatisticsTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1 · 1 row entry · 56 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apInterfaceWireStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apInterfaceWireStatisticsTable'

ap wireless interface Statistics info table.

apInterfaceWireStatisticsTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1

ap wireless interface Statistics info table.

Indexes

QTECH-AC-MGMT-MIBqtechApMacAddr QTECH-AC-MGMT-MIBqtechApCfgRadioId

Column	Syntax	OID
apAvgRxSignalStrength average Rx Signal Strength.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.1`
apHighestRxSignalStrength Highest Rx Signal Strength .	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.2`
apLowestRxSignalStrength Lowest Rx Signal Strength .	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.3`
apWirelessUpdownTimes Wireless Updown Times .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.4`
apChStatsNumStations the number of statons used this channel.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.5`
apTxDataPkts ap send Data Packets .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.6`
apRxDataPkts ap Receive Data Packets .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.7`
apUplinkDataOctets ap Receive Data Bytes .	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.8`
apDwlinkDataOctets ap Send Data Bytes .	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.9`
apChStatsDwlinkTotRetryPkts ap Send retry packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.10`
apChStatsPhyErrPkts ap Receive phy error packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.11`
apChStatsMacFcsErrPkts ap Receive MCS FCS error packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.12`
apChStatsMacMicErrPkts ap Receive MCS MIC error packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.13`
apChStatsMacDecryptErrPkts ap Receive MCS Decrypt error packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.14`
apChStatsTotalErrPkts ap channel Receive all errort packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.15`
apRxMgmtFrameCnt Number of RX management frames.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.16`
apRxCtrlFrameCnt Number of RX control frames.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.17`
apRxDataFrameCnt Number of RX data frames.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.18`
apTxMgmtFrameCnt Number of TX management frames.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.19`
apTxCtrlFrameCnt Number of TX control frames.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.20`
apTxDataFrameCnt Number of TX data frames.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.21`
apChStatsFrameErrorCnt error frames.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.22`
apRetryCnt retry count.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.23`
apCurTxPwr TX power of AP.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.24`
apAPNeighborSSIDList SSID list around AP.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.25`
apChDownUnicastFrame down link uincast frame.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.26`
apChDownNonUnicastFrame down link non-uincast frame.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.27`
apChTxThroughput transmit throughput.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.28`
apChRxThroughput receive throughput.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.29`
apChTxDropPkts transmit drop packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.30`
apChRxDropPkts receive drop packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.31`
apChTxErrorPkts transmit error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.32`
apChRxErrorPkts receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.33`
apRxBytes receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.34`
apRxPkts receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.35`
apTxBytes receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.36`
apTxPkts receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.37`
apDownNonUnicastPkts receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.38`
apDownUnicastPkts receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.39`
apUpNonUnicastPkts receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.40`
apUpUnicastPkts receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.41`
apAssoFailUnknowReason receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.42`
apAssoFailOutofDot11 receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.43`
apAssoTotalTime receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.44`
apAuthReqFailTimes receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.45`
apAuthReqTimes receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.46`
apAuthSuccessTimes receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.47`
apReAssoFailTimes receive error packages.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.48`
apMacTxCorrectFrameCnt ap Send Correct Frame Count .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.49`
apMacRxCorrectFrameCnt ap Receive Correct Frame Count .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.50`
apPktErrRate ap Pkt err rate = pkt error rate.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.51`
apTotalRxBytes ap rx bytes count64.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.52`
apTotalTxBytes ap tx bytes count64.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.53`
apTxErrorPkts TX error packet for ap radio.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.54`
apTxDropPkts TX drop packet for ap radio.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.55`
apIfRadiusOnlineUserNum ap Interface Radius Online User Number.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.4.1.1.56`

apSSIDStatisticsTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.1 · 1 row entry · 13 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apSSIDStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apSSIDStatisticsTable'

ap SSID Statistics info table.

apSSIDStatisticsTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.10.5.1.1

ap SSID Statistics info table.

Indexes

apSSIDStatisticsAPMac apSSIDStatisticsRadioId apSSIDStatisticsWlanId

Column	Syntax	OID
apSSIDStatisticsAPMac ap mac.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.1.1.1`
apSSIDStatisticsRadioId radio id .	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.1.1.2`
apSSIDStatisticsWlanId wlan id .	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.1.1.3`
apSSIDTxDataPkts ap ssid Tx Data packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.1.1.4`
apSSIDRxDataPkts ap ssid Rx Data packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.1.1.5`
apSSIDUplinkDataOctets ap ssid Rx Link Data Bytes.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.1.1.6`
apSSIDDwlinkDataOctets ap ssid Tx Link Data Bytes.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.1.1.7`
apSSIDChStatsDwlinkTotRetryPkts ap downLink retry packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.1.1.8`
apSSIDApChStatsNumStations stations number current connet to this ssid .	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.1.1.9`
apApChStatsOnlineSum stations number on line .	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.1.1.10`
apSSIDStatisticsName SSID name .	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.1.1.11`
apSSIDMacTxPkts ssid mac transmit correct packet counte.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.1.1.12`
apSSIDMacRxPkts ssid mac receive correct packets counte.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.1.1.13`

apSSIDStatisticsNewTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.2 · 1 row entry · 12 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apSSIDStatisticsNewTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apSSIDStatisticsNewTable'

ap SSID Statistics info table.

apSSIDStatisticsNewTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.10.5.2.1

ap SSID Statistics info table.

Indexes

apSSIDStatisticsNewAPMac apSSIDStatisticsNewRadioId apSSIDStatisticsNewSSID

Column	Syntax	OID
apSSIDStatisticsNewAPMac ap mac.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.2.1.1`
apSSIDStatisticsNewRadioId radio id .	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.2.1.2`
apSSIDStatisticsNewSSID wlan id .	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.2.1.3`
apSSIDNewTxDataPkts ap ssid Tx Data packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.2.1.4`
apSSIDNewRxDataPkts ap ssid Rx Data packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.2.1.5`
apSSIDNewUplinkDataOctets ap ssid Rx Link Data Bytes.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.2.1.6`
apSSIDNewDwlinkDataOctets ap ssid Tx Link Data Bytes.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.2.1.7`
apSSIDNewChStatsDwlinkTotRetryPkts ap downLink retry packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.2.1.8`
apSSIDNewApChStatsNumStations stations number current connet to this ssid .	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.2.1.9`
apApNewChStatsOnlineSum stations number on line .	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.2.1.10`
apSSIDNewMacTxPkts ssid mac transmit correct packet counte.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.2.1.11`
apSSIDNewMacRxPkts ssid mac receive correct packets counte.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.5.2.1.12`

apWAPIStatisticsTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.10.6.1 · 1 row entry · 14 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apWAPIStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apWAPIStatisticsTable'

ap Stations Statistics info table.

apWAPIStatisticsTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.10.6.1.1

ap Stations Statistics info table.

Indexes

apWAPIControlledPortStatus

Column Syntax OID

wapi Controlled Port Status.

apWAPISelectedUnicastCipher

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.27514.1.1.10.2.81.10.6.1.1.1

wapi Selected Unicast Cipher.

OctetString

.1.3.6.1.4.1.27514.1.1.10.2.81.10.6.1.1.2

apWPIReplayCounters

wapi Replay drop MPDU packets.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.10.6.1.1.3

apWPIDecryptableErrors

wapi Decryptable Errors drop MPDU packets.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.10.6.1.1.4

apWPIMICErrors

wapi MIC Check Errors drop MPDU packets.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.10.6.1.1.5

apWAISignatureErrors

wai Signature errors packets.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.10.6.1.1.6

apWAIHMACErrors

WAIHMAC errors packets.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.10.6.1.1.7

apWAIAuthResultFailures

WAPI AuthResultFailures packets.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.10.6.1.1.8

apWAIDiscardCounters

WAPI Discard packets.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.10.6.1.1.9

apWAITimeoutCounters

WAPI Timeout drop packets.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.10.6.1.1.10

apWAIFormatErrors

WAPI Format Errors drop packets.

apWAICertificateHandshakeFailures

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.10.6.1.1.11

WAPI Certificate Handshake Failures counts.

apWAIUnicastHandshakeFailures

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.10.6.1.1.12

WAPI Unicast Handshake Failures counts.

apWAIMulticastHandshakeFailures

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.10.6.1.1.13

WAPI Multicast Handshake Failures counts.

QTECH-AC-MGMT-MIBqtechStaMacAddr

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.81.10.6.1.1.14

apStationStatisticsTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1 · 1 row entry · 16 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apStationStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apStationStatisticsTable'

ap Stations Statistics info table.

apStationStatisticsTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1.1

ap Stations Statistics info table.

Indexes

Column	Syntax	OID
apStaAddress station Mac addr.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1.1.1`
apStaUpTime station connect to AP seconds.	SNMPv2-SMITimeTicks Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1.1.2`
apReceivedStaSignalStrength station current single strength.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1.1.3`
apAPReceiveStaSNR SNR	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1.1.4`
apStaTxPkts station Tx Packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1.1.5`
apStaTxBytes station Tx Bytess.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1.1.6`
apStaRxPkts station Rx Packets.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1.1.7`
apStaRxBytes station Rx Bytess.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1.1.8`
apWAPISTAAddress wapi station mac address.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1.1.9`
apWAPIVersion wapi version.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1.1.10`
apStaLinkSpeed STA link speed.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1.1.11`
apStaUpRate STA uplink rate.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1.1.12`
apStaDownRate STA downlink rate.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1.1.13`
apStaTxThroughput station transmit throughput during associated time.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1.1.14`
apStaRxThroughput station receive throughput during associated time.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1.1.15`
apStaRxRetryBytes station Rx retry Bytes.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.7.1.1.16`

apQOSBaseStatisticsTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.1.1 · 1 row entry · 3 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apQOSBaseStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apQOSBaseStatisticsTable'

ap Base QOS Statistics info table.

apQOSBaseStatisticsTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.10.8.1.1.1

ap Base QOS Statistics info table.

Indexes

QTECH-AC-MGMT-MIBqtechApMacAddr QTECH-AC-MGMT-MIBqtechApCfgRadioId

Column	Syntax	OID
apBaseQoSSvcQueAvgLen AP QOS Queue average len.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.1.1.1.1`
apBaseQoSSvcPktLossRatio AP QOS packets loss Ratio.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.1.1.1.2`
apBaseAvgTransSpeed AP QOS average TX speed.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.1.1.1.3`

apQOSBackgroundStatisticsTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.2.1 · 1 row entry · 5 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apQOSBackgroundStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apQOSBackgroundStatisticsTable'

ap Background QOS Statistics info table.

apQOSBackgroundStatisticsTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.10.8.2.1.1

ap Background QOS Statistics info table.

Indexes

QTECH-AC-MGMT-MIBqtechApMacAddr QTECH-AC-MGMT-MIBqtechApCfgRadioId

Column	Syntax	OID
apQOSBgQueAvgLen AP QOS Background Queue average len.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.2.1.1.1`
apQOSBgAvgBurst AP QOS Background average burst ratio.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.2.1.1.2`
apQOSBgPktLossRatio AP QOS Background packet loss ratio.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.2.1.1.3`
apQOSBgAvgTransSpeed AP QOS Background average TX speed.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.2.1.1.4`
apQOSBgSvcLoss AP QOS Background rob loss ratio.s	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.2.1.1.5`

apQOSBestEffortStatisticsTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.3.1 · 1 row entry · 5 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apQOSBestEffortStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apQOSBestEffortStatisticsTable'

ap BestEffort QOS Statistics info table.

apQOSBestEffortStatisticsTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.10.8.3.1.1

ap BestEffort QOS Statistics info table.

Indexes

QTECH-AC-MGMT-MIBqtechApMacAddr QTECH-AC-MGMT-MIBqtechApCfgRadioId

Column	Syntax	OID
apQOSBeQueAvgLen AP QOS BestEffort Queue average len.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.3.1.1.1`
apQOSBeAvgBurst AP QOS BestEffort average burst ratio.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.3.1.1.2`
apQOSBePktLossRatio AP QOS BestEffort packet loss ratio.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.3.1.1.3`
apQOSBeAvgTransSpeed AP QOS BestEffort average TX speed.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.3.1.1.4`
apQOSBeSvcLoss AP QOS BestEffort rob loss ratio.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.3.1.1.5`

apQOSVoiceStatisticsTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.4.1 · 1 row entry · 8 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apQOSVoiceStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apQOSVoiceStatisticsTable'

ap voice QOS Statistics info table.

apQOSVoiceStatisticsTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.10.8.4.1.1

ap vioce QOS Statistics info table.

Indexes

QTECH-AC-MGMT-MIBqtechApMacAddr QTECH-AC-MGMT-MIBqtechApCfgRadioId

Column	Syntax	OID
apQOSVoiceQueAvgLen AP QOS voice queue average length	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.4.1.1.1`
apQOSVoiceAvgBurst AP QOS voice average burst ratio	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.4.1.1.2`
apQOSVoicePktLossRatio AP QOS voice packets loss ratio	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.4.1.1.3`
apQOSVoiceAvgTransSpeed AP QOS voice average TX speed	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.4.1.1.4`
apQOSVoicePutThroughRatio AP QOS voice PutThrough Ratio	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.4.1.1.5`
apQOSVoiceDropRatio AP QOS voice Drop Ratio	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.4.1.1.6`
apQOSVoiceSvcLoss AP QOS voice rob loss ratio	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.4.1.1.7`
apQOSVoiceExceedMaxUsersRequest AP QOS decline counts of Voice user Exceed Max Users	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.4.1.1.8`

apQOSVideoStatisticsTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.5.1 · 1 row entry · 8 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apQOSVideoStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apQOSVideoStatisticsTable'

ap Video QOS Statistics info table.

apQOSVideoStatisticsTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.10.8.5.1.1

ap Video QOS Statistics info table.

Indexes

QTECH-AC-MGMT-MIBqtechApMacAddr QTECH-AC-MGMT-MIBqtechApCfgRadioId

Column	Syntax	OID
apQOSVideoQueAvgLen AP QOS Video queue average length	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.5.1.1.1`
apQOSVideoAvgBurst AP QOS Video average burst ratio	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.5.1.1.2`
apQOSVideoPktLossRatio AP QOS Video packets loss ratio	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.5.1.1.3`
apQOSVideoAvgTransSpeed AP QOS Video average TX speed	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.5.1.1.4`
apQOSVideoPutThroughRatio AP QOS Video PutThrough Ratio	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.5.1.1.5`
apQOSVideoDropRatio AP QOS Video Drop Ratio	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.5.1.1.6`
apQOSVideoSvcLoss AP QOS Video rob loss ratio	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.5.1.1.7`
apQOSVideoExceedMaxUsersRequest AP QOS decline counts of Voice user Exceed Max Users	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.8.5.1.1.8`

apWIDSRogueApInfoTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.10.9.1 · 1 row entry · 2 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apWIDSRogueApInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apWIDSRogueApInfoTable'

Rogue ap info.

apWIDSRogueApInfoTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.10.9.1.1

ap WIDS Rogue Ap info table.

Indexes

qtechRogueApMacAddr

Column	Syntax	OID
qtechRogueApMacAddr Rogue Ap mac	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.9.1.1.1`
qtechRogueApRSSI Rogue Ap RSSI	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.10.9.1.1.2`

apTerminalPermitTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.12.1 · 1 row entry · 3 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apTerminalPermitTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apTerminalPermitTable'

Terminal white list

apTerminalPermitEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.12.1.1

The entry of apTerminalPermitTable.

Indexes

apWhiteListIndex

Column Syntax OID

apWhiteListIndex

The index of the table.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.12.1.1.1

apPermitMAC

The permited MAC address.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.12.1.1.2

apWhiteListStatus

The status column used for creating and
deleting instances of the columnar objects in the table.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.12.1.1.3

apTerminalDeniedTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.12.2 · 1 row entry · 3 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apTerminalDeniedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apTerminalDeniedTable'

Terminal black list

apTerminalDeniedEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.12.2.1

The entry of apTerminalDeniedTable.

Indexes

apBlackListIndex

Column Syntax OID

apBlackListIndex

The index of the table.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.27514.1.1.10.2.81.12.2.1.1

apAttackDeviceMAC

The Denied MAC address.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.12.2.1.2

apBlackListStatus

The status column used for creating and
deleting instances of the columnar objects in the table.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.12.2.1.3

apTerminalBlackListTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.12.3 · 1 row entry · 3 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apTerminalBlackListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apTerminalBlackListTable'

Terminal Black List Table

apTerminalBlackListEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.12.3.1

The entry of apTerminalBlackListTable.

Indexes

apBlackListDeviceMAC

Column	Syntax	OID
apBlackListDeviceMAC the Station Mac Address.	SNMPv2-TCMacAddressr/w Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.27514.1.1.10.2.81.12.3.1.1`
apBlackListAddReason the reason of adding, included static and dynamic.	OctetString	`.1.3.6.1.4.1.27514.1.1.10.2.81.12.3.1.2`
apBlackListDuration adding type: dynamic, the rest of time the record in list adding type: static, 0.	SNMPv2-SMITimeTicks Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.27514.1.1.10.2.81.12.3.1.3`

apWidsIllegalApTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.14.1 · 1 row entry · 7 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apWidsIllegalApTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apWidsIllegalApTable'

Illegal ap table

apWidsIllegalApEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.14.1.1

The entry of apWidsIllegalApTable.

Indexes

apIllegalApMac

Column	Syntax	OID
apIllegalApMac illegal ap mac.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.27514.1.1.10.2.81.14.1.1.1`
apIllegalApChannel illegal ap channel.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.14.1.1.2`
apIllegalApRSSI illegal ap RSSI.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.14.1.1.3`
apWorkingApMac Working ap mac.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.27514.1.1.10.2.81.14.1.1.4`
apDetectAPBSSID Working ap BSSID.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.27514.1.1.10.2.81.14.1.1.5`
apIllegalApType illegal ap type 0:AP 1:adhoc.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.14.1.1.6`
apIllegalApSSID illegal ap SSID.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.14.1.1.7`

apWidsApCounterTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.14.2 · 1 row entry · 4 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apWidsApCounterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apWidsApCounterTable'

Illegal ap table

apWidsApCounterEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.14.2.1

The entry of apWidsApCounterTable.

Indexes

apCounterMac

Column	Syntax	OID
apCounterMac ap mac.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.27514.1.1.10.2.81.14.2.1.1`
apCounter ap counter.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.14.2.1.2`
apCounterMode ap counter mdoe, supports a variety of combinations, 0x1:config 0x2:rouge 0x4:ssid 0x8:adhoc.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.14.2.1.3`
apCounterRssiThreshold ap counter rssi.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.14.2.1.4`

apWidsPermitMacTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.14.9 · 1 row entry · 2 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apWidsPermitMacTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apWidsPermitMacTable'

wids permit mac table

apWidsPermitMacEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.14.9.1

The entry of apWidsPermitMacTable.

Indexes

apWidsPermitMac

Column Syntax OID

apWidsPermitMac

wids permit mac.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.14.9.1.1

apPermitMacrowstatus

wids permit mac table row status.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.14.9.1.2

apWidsPermitSSIDTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.14.10 · 1 row entry · 2 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apWidsPermitSSIDTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apWidsPermitSSIDTable'

wids permit ssid table

apWidsPermitSSIDEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.14.10.1

The entry of apWidsPermitSSIDTable.

Indexes

apCounterSSID

Column Syntax OID

apCounterSSID

wids permit ssid.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.14.10.1.1

apPermitSSIDrowstatus

wids permit ssid table row status.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.14.10.1.2

apWidsPermitVendorTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.14.11 · 1 row entry · 2 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apWidsPermitVendorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apWidsPermitVendorTable'

wids permit Vendor table

apWidsPermitVendorEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.14.11.1

The entry of apWidsPermitVendorTable.

Indexes

apCounterVendor

Column Syntax OID

apCounterVendor

wids permit Vendor.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.14.11.1.1

apPermitVendorrowstatus

wids permit vendor table row status.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.14.11.1.2

apWidsStaticAttackTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.14.12 · 1 row entry · 2 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apWidsStaticAttackTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apWidsStaticAttackTable'

wids static attack mac table

apWidsStaticAttackEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.14.12.1

The entry of apWidsStaticAttackTable.

Indexes

apStaticAttackMac

Column Syntax OID

apStaticAttackMac

wids static attack mac.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.14.12.1.1

apStaticAttackrowstatus

wids static attack mac table row status.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.27514.1.1.10.2.81.14.12.1.2

apWidsNeighborApInfoTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.14.13 · 1 row entry · 5 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apWidsNeighborApInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apWidsNeighborApInfoTable'

wids neighbor Aps' Infomation table

apWidsNeighborApInfoEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.14.13.1

The entry of apWidsNeighborApInfoTable.

Indexes

neighborApMac

Column	Syntax	OID
neighborApMac Neighbor Ap Mac Address .	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.27514.1.1.10.2.81.14.13.1.1`
neighborApSSID Neighbor Ap Mac SSID .	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.27514.1.1.10.2.81.14.13.1.2`
neighborApRSSI Neighbor Ap Mac RSSI .	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.14.13.1.3`
neighborApChannel Neighbor Ap Channel .	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.14.13.1.4`
neighborApInControl Is this Neighbor Ap under this Ac's control.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.27514.1.1.10.2.81.14.13.1.5`

apWidsBlackSSIDTable

table

.1.3.6.1.4.1.27514.1.1.10.2.81.14.20 · 1 row entry · 2 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk apWidsBlackSSIDTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-FIT-AP-CF-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-FIT-AP-CF-MIB::apWidsBlackSSIDTable'

wids black ssid table

apWidsBlackSSIDEntry row .1.3.6.1.4.1.27514.1.1.10.2.81.14.20.1

The entry of apWidsBlackSSIDTable.

Indexes

apBlackSSID

Column Syntax OID

apBlackSSID

wids black ssid.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.81.14.20.1.1

apBlackSSIDrowstatus

wids black ssid table row status.