QTECH-OSPF-MIB Table View

Information describing the configured  parame-
ters  and cumulative statistics of the router's
attached areas.This table is superset of ospfAreaTable

qtechOspfAreaEntry row .1.3.6.1.4.1.27514.1.1.10.2.30.1.2.1

The entry of qtechOspfAreaTable.

Indexes

qtechOspfAreaId

Column	Syntax	OID
qtechOspfAreaId A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.	OSPF-MIBAreaID	.1.3.6.1.4.1.27514.1.1.10.2.30.1.2.1.1
qtechOspfAuthType The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis.	Enumerationr/w Enumerated Values: 0 none 1 simplePassword 2 md5	.1.3.6.1.4.1.27514.1.1.10.2.30.1.2.1.2
qtechOspfImportAsExtern The area's support for importing AS external link- state advertisements.	Enumerationr/w Enumerated Values: 1 importExternal 2 importNoExternal 3 importNssa	.1.3.6.1.4.1.27514.1.1.10.2.30.1.2.1.3
qtechOspfSpfRuns The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.2.1.4
qtechOspfAreaBdrRtrCount The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.2.1.5
qtechOspfAsBdrRtrCount The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.2.1.6
qtechOspfAreaLsaCount The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.2.1.7
qtechOspfAreaLsaCksumSum The 32-bit unsigned sum of the link-state ad- vertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to deter…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.2.1.8
qtechOspfAreaSummary The variable ospfAreaSummary controls the im- port of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate summary L…	Enumerationr/w Enumerated Values: 1 noAreaSummary 2 sendAreaSummary	.1.3.6.1.4.1.27514.1.1.10.2.30.1.2.1.9
qtechOspfAreaStatus This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.30.1.2.1.10
qtechOspfAreaInterfaceNum the interface number of this area	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.2.1.11
qtechOspfAreaNssaIsRedistribution if it's disabled , when the router is an NSSA ABR and you want the redistribute command to import routes into normal areas, but not into the NSSA, this field is vaild for nssa area	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.30.1.2.1.12
qtechOspfAreaNssaIsDefInfoOriginate if it's enabled it meaning that on an ABR to allow importing type 7 LSAs into the NSSA, this field is valid for nssa area	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.30.1.2.1.13

Define an interface on which OSPF runs and the area ID for that
interface. You can use the wildcard-mask to use a single
command to define one or more multiple interfaces to be
associated with a specific OSPF area.

qtechOspfAddressScopeEntry row .1.3.6.1.4.1.27514.1.1.10.2.30.1.3.1

the entry define an scope of address for ospf routing.

Indexes

qtechOspfNetWorkAreaID qtechOspfNetWorkAddress qtechOspfNetWorkMask

Column	Syntax	OID
qtechOspfNetWorkAreaID area ID	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.3.1.1
qtechOspfNetWorkAddress Routing for Networks Ipaddress	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.3.1.2
qtechOspfNetWorkMask Routing for Networks mask	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.3.1.3
qtechOspfNetWorkStatus when this value is destroy,the entry will be deleted	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.30.1.3.1.4

The OSPF Interface Table describes the  interfaces 
from the viewpoint of OSPF.

qtechOspfIfEntry row .1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1

The OSPF Interface Entry describes one inter-
face configuration of OSPF.

Indexes

qtechOspfIfIpAddress qtechOspfAddressLessIf

Column	Syntax	OID
qtechOspfIfIpAddress The IP address of this OSPF interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.1
qtechOspfAddressLessIf For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces havin…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.2
qtechOspfIfAreaId A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.	OSPF-MIBAreaID	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.3
qtechOspfIfType The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25…	Enumerationr/w Enumerated Values: 1 broadcast 2 nbma 3 pointToPoint 5 pointToMultipoint 6 loopback	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.4
qtechOspfIfAdminStat The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is extern…	OSPF-MIBStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.5
qtechOspfIfRtrPriority The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designate…	OSPF-MIBDesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.6
qtechOspfIfTransitDelay The estimated number of seconds it takes to transmit a link state update packet over this interface.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.7
qtechOspfIfRetransInterval The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request …	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.8
qtechOspfIfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network.	OSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.9
qtechOspfIfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for a…	OSPF-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.10
qtechOspfIfPollInterval The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.	OSPF-MIBPositiveInteger Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.11
qtechOspfIfState The OSPF Interface State.	Enumeration Enumerated Values: 1 down 2 loopback 3 waiting 4 pointToPoint 5 designatedRouter 6 backupDesignatedRouter 7 otherDesignatedRouter	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.12
qtechOspfIfDesignatedRouter The IP Address of the interface which connected the local router in the Designated Router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.13
qtechOspfIfBackupDesignatedRouter The IP Address of the interface which connected the local router in the Backup Designated Router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.14
qtechOspfIfEvents The number of times this OSPF interface has changed its state, or an error has occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.15
qtechOspfIfAuthKey The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthentica…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.16
qtechOspfIfStatus This value will be active(1) always.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.17
qtechOspfIfMulticastForwarding The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NB…	Enumeration Enumerated Values: 1 blocked 2 multicast 3 unicast	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.18
qtechOspfIfDemand Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.19
qtechOspfIfAuthType The authentication type specified for an interface. Setting this value to 'default' means using default authentication type referenced to Area Authentication, this value only for set,not be read. Additional authent…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.20
qtechOspfIfDatabaseFilterAllOut Block flooding of OSPF LSA packets to the interface. By default, OSPF floods new LSAs over all interfaces in the same area, except the interface on which the LSA arrives.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.21
qtechOspfIfDesignateRouterId DR RouterID of this interface, when DR does not selected,DR Id is 0.0.0.0	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.22
qtechOspfIfBackupDesignateRouterId Backup DR RouterId of this interface , when Backup DR does not selected,BDR Id is 0.0.0.0	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.23
qtechOspfIfWaitInternal The wait time of hello generate	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.24
qtechOspfIfPassiveStatus Setting this object value to 'enabled' ,the interface will become a passive interface.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.25
qtechOspfIfCurrentUsedMd5AuthKeyId key-id which current used for md5 authentication,this value is valid from 1 to 255, the value 0 is default value..	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.27514.1.1.10.2.30.1.4.1.26

Configuration table of the key-id for md5 authentication for OSPF protocol.

qtechOspfIfMd5AuthKeyEntry row .1.3.6.1.4.1.27514.1.1.10.2.30.1.5.1

Configuration entry of the key-id for md5 authentication for OSPF protocol

Indexes

qtechOspfIfMd5AuthKeyIf qtechOspfIfMd5AuthKeyId

Column	Syntax	OID
qtechOspfIfMd5AuthKeyIf Corresponding value of ifIndex for interfaces.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.5.1.1
qtechOspfIfMd5AuthKeyId the key-id for md5 authentication.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.27514.1.1.10.2.30.1.5.1.2
qtechOspfIfMd5AuthKey The Authentication Key for MD5. When read, qtechOspfIfMd5AuthKey always returns an Oc- tet String of length zero.	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.27514.1.1.10.2.30.1.5.1.3
qtechOspfIfMd5AuthKeySt Setting this value to 'invalid' will delete this entry. Setting this value to 'valid' will have no effect.	QTECH-TCConfigStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.27514.1.1.10.2.30.1.5.1.4

Information about this router's virtual inter-
faces.Include ospfVirtIfTable in rfc1850

qtechOspfVirtEntry row .1.3.6.1.4.1.27514.1.1.10.2.30.1.6.1

Information about a single Virtual Interface

Indexes

qtechOspfVirtIfAreaId qtechOspfVirtIfNeighbor

Column	Syntax	OID
qtechOspfVirtIfAreaId The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0	OSPF-MIBAreaID	.1.3.6.1.4.1.27514.1.1.10.2.30.1.6.1.1
qtechOspfVirtIfNeighbor The Router ID of the Virtual Neighbor.	OSPF-MIBRouterID	.1.3.6.1.4.1.27514.1.1.10.2.30.1.6.1.2
qtechOspfVirtIfTransitDelay The estimated number of seconds it takes to transmit a link- state update packet over this interface.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.27514.1.1.10.2.30.1.6.1.3
qtechOspfVirtIfRetransInterval The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state reque…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.27514.1.1.10.2.30.1.6.1.4
qtechOspfVirtIfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor.	OSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.27514.1.1.10.2.30.1.6.1.5
qtechOspfVirtIfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for t…	OSPF-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.30.1.6.1.6
qtechOspfVirtIfState OSPF virtual interface states.	Enumeration Enumerated Values: 1 down 4 pointToPoint	.1.3.6.1.4.1.27514.1.1.10.2.30.1.6.1.7
qtechOspfVirtIfEvents The number of state changes or error events on this Virtual Link	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.6.1.8
qtechOspfVirtIfAuthKey If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication key, and simple password authen- ticatio…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.27514.1.1.10.2.30.1.6.1.9
qtechOspfVirtIfStatus This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.30.1.6.1.10
qtechOspfVirtIfAuthType The authentication type specified for a virtual interface. Setting this value 'default' means using default authentication type referenced to Area Authentication, this value only for set,not be read. Additional authe…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.27514.1.1.10.2.30.1.6.1.11
qtechOspfVirtCost Explicitly specify the cost of sending a packet on the interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.6.1.12
qtechOspfVirtNativeIfIndex the Interface's Index that The Virtual Link via this interface.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.30.1.6.1.13
qtechOspfVirtLinkState The Virtual Link State is up or down.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.27514.1.1.10.2.30.1.6.1.14
qtechOspfVirtHelloDueIn the time when hello due in.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.6.1.15
qtechOspfVirtCurrentUsedMd5AuthKeyId the key-id which current used for md5 authentication,this value is valid from 1 to 255, the value 0 is default value.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.27514.1.1.10.2.30.1.6.1.16

Configuration table of the key-id for md5 authentication in VirtIf 
for OSPF protocol.

qtechOspfVirtIfMd5AuthKeyEntry row .1.3.6.1.4.1.27514.1.1.10.2.30.1.7.1

Configuration entry of the key-id for md5 authentication in VirtIf
for OSPF protocol

Indexes

qtechOspfVirtIfMd5AuthKeyAreaId qtechOspfVirtIfMd5AuthKeyNeighbor qtechOspfVirtIfMd5AuthKeyId

Column	Syntax	OID
qtechOspfVirtIfMd5AuthKeyAreaId The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0	OSPF-MIBAreaID	.1.3.6.1.4.1.27514.1.1.10.2.30.1.7.1.1
qtechOspfVirtIfMd5AuthKeyNeighbor The Router ID of the Virtual Neighbor.	OSPF-MIBRouterID	.1.3.6.1.4.1.27514.1.1.10.2.30.1.7.1.2
qtechOspfVirtIfMd5AuthKeyId the key-id for md5 authentication.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.27514.1.1.10.2.30.1.7.1.3
qtechOspfVirtIfMd5AuthKey The Authentication Key for MD5. When read, qtechOspfVirtIfMd5AuthKey always returns an Oc- tet String of length zero.	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.27514.1.1.10.2.30.1.7.1.4
qtechOspfVirtIfMd5AuthKeySt Setting this value to 'invalid' will delete this entry. Setting this value to 'valid' will have no effect.	QTECH-TCConfigStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.27514.1.1.10.2.30.1.7.1.5

The OSPF Process's Link State Database.

qtechOspfLsdbEntry row .1.3.6.1.4.1.27514.1.1.10.2.30.1.8.1.1

A single Link State Advertisement.

Indexes

qtechOspfLsdbAreaId qtechOspfLsdbType qtechOspfLsdbLsid qtechOspfLsdbRouterId

Column	Syntax	OID
qtechOspfLsdbAreaId The 32 bit identifier of the Area from which the LSA was received.	OSPF-MIBAreaID	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.1.1.1
qtechOspfLsdbType The type of the link state advertisement. Each link state type has a separate advertise- ment format.	Enumeration Enumerated Values: 1 routerLink 2 networkLink 3 summaryLink 4 asSummaryLink 5 asExternalLink 6 multicastLink 7 nssaExternalLink	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.1.1.2
qtechOspfLsdbLsid The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.1.1.3
qtechOspfLsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.1.1.4
qtechOspfLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number t…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.1.1.5
qtechOspfLsdbAge This field is the age of the link state adver- tisement in seconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.1.1.6
qtechOspfLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checks…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.1.1.7
qtechOspfLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString Constraints: range: 1-512	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.1.1.8
qtechOspfLsdbLinkNum the link count of this Router Link Lsa , this field is only valid for Router Link Lsa??type 1 LSA)	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.1.1.9
qtechOspfLsdbPacketLength the lsa packet length .	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.1.1.10
qtechOspfSummaryLsaNetworkMask this field is only useful when ospfLsdbType is type-3 or type-4 or type-7,it's the Lsa's network mask .	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.1.1.11
qtechOspfSummaryLsaTos0Metric this field is only useful when ospfLsdbType is type-3 or type-4 or type-7,it's the Lsa's tos0 metric .	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.1.1.12
qtechOspfNssaLsaDetailMetricType this field is valid when Lsa is a type-7 LSA. The type of Nssa ernal metric. If bit E is set, the metric specified is a Type 2 external metric. This means the metric is considered larger than any link state path. If …	Enumeration Enumerated Values: 1 type1 2 type2	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.1.1.13
qtechOspfNssaLsaDetailForwardAddr this field is valid when Lsa is a type-7 LSA. Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded instead to the L…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.1.1.14
qtechOspfNssaLsaDetailRouteTag this field is valid when Lsa is a type-7 LSA. A 32-bit field attached to each external route. This is not used by the OSPF protocol itself. It may be used to communicate information between AS boundary routers; the pr…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.1.1.15
qtechOspfLsdbOption the option field indicate which optional capabilities area associated with the LSA.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.1.1.16

The OSPF Process's Links State Database.

qtechOspfExtLsdbEntry row .1.3.6.1.4.1.27514.1.1.10.2.30.1.8.2.1

A single Link State Advertisement.

Indexes

qtechOspfExtLsdbType qtechOspfExtLsdbLsid qtechOspfExtLsdbRouterId

Column	Syntax	OID
qtechOspfExtLsdbType The type of the link state advertisement. Each link state type has a separate advertise- ment format.	Enumeration Enumerated Values: 5 asExternalLink	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.2.1.1
qtechOspfExtLsdbLsid The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.2.1.2
qtechOspfExtLsdbRouterId The 32 bit number that uniquely identifies the originating router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.2.1.3
qtechOspfExtLsdbSequence The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number t…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.2.1.4
qtechOspfExtLsdbAge This field is the age of the link state adver- tisement in seconds.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.2.1.5
qtechOspfExtLsdbChecksum This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checks…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.2.1.6
qtechOspfExtLsdbAdvertisement The entire Link State Advertisement, including its header.	OctetString Constraints: range: 36-36	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.2.1.7
qtechOspfExtLsdbNetworkMask The IP address mask for the advertised destination. For example, when advertising a class A network the mask 0xff000000 would be used.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.2.1.8
qtechOspfExtLsdbMetric The cost of this route. Interpretation depends on the external type indication.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.2.1.9
qtechOspfExtLsdbMetricType The type of external metric. If bit E is set, the metric specified is a Type 2 external metric. This means the metric is considered larger than any link state path. If bit E is zero, the specified metric is a Type 1 …	Enumeration Enumerated Values: 1 type1 2 type2	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.2.1.10
qtechOspfExtLsdbForwardAddr Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded instead to the LSA's originator (i.e., the responsible AS bound…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.2.1.11
qtechOspfExtLsdbRouteTag A 32-bit field attached to each external route. This is not used by the OSPF protocol itself. It may be used to communicate information between AS boundary routers; the precise nature of such information is outside th…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.2.1.12
qtechOspfExtLsdbOption the option field indicate which optional capabilities area associated with the LSA.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.2.1.13
qtechOspfExtLsdbPacketLength the lsa packet length .	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.2.1.14

the router Lsa's detail Infromtion.

qtechOspfRouterLsaDetailEntry row .1.3.6.1.4.1.27514.1.1.10.2.30.1.8.3.1

the entry of this table.

Indexes

qtechOspfLsdbAreaId qtechOspfLsdbType qtechOspfLsdbLsid qtechOspfLsdbRouterId qtechOspfRouterLsaDetailLinkID

Column	Syntax	OID
qtechOspfRouterLsaDetailLinkID router lsa's link ID Identifies the object that this router link connects to. Value depends on the link's Type. When connecting to an object that also originates an LSA (i.e., another router or a transit network)…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.3.1.1
qtechOspfRouterLsaDetailLinkType router lsa's link type A quick description of the router link. One of the following. Note that host routes are classified as links to stub networks with network mask of 0xffffffff.	Enumeration Enumerated Values: 1 pointtopointConnectionToAnotherRouter 2 connectionToaTransitNetwork 3 connectionToaStubNetwork 4 virtualLink	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.3.1.2
qtechOspfRouterLsaDetailLinkData Value again depends on the link's Type field. For connections to stub networks, Link Data specifies the network's IP address mask. For unnumbered point-to-point connections, it specifies the interface's MIB-II ifIndex …	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.3.1.3
qtechOspfRouterLsaDetailTos0Metric TOS0-specific metric information.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.3.1.4

the NetWork Lsa's detail Infromtion.

qtechOspfNetWorkLsaDetailEntry row .1.3.6.1.4.1.27514.1.1.10.2.30.1.8.4.1

the entry of this table.

Indexes

qtechOspfLsdbAreaId qtechOspfLsdbType qtechOspfLsdbLsid qtechOspfLsdbRouterId qtechOspfNetWorkLsaDetailAttachedRouter

Column	Syntax	OID
qtechOspfNetWorkLsaDetailAttachedRouter The Router IDs of each of the routers attached to the network. Actually, only those routers that are fully adjacent to the Designated Router are listed. The Designated Router includes itself in this list. The number o…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.4.1.1
qtechOspfNetWorkLsaDetailNetworkMask The IP address mask for the network. For example, a class A network would have the mask 0xff000000.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.4.1.2

The OSPF Area LSA database summary Infromtion.

qtechOspfAreaLsaDBSumEntry row .1.3.6.1.4.1.27514.1.1.10.2.30.1.8.5.1

the entry of this table.

Indexes

qtechOspfAreaLsaDBSumAreaId qtechOspfAreaLsaDBSumLsaType

Column	Syntax	OID
qtechOspfAreaLsaDBSumAreaId The area Id.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.5.1.1
qtechOspfAreaLsaDBSumLsaType the entry's entry type.	Enumeration Enumerated Values: 1 routerLink 2 networkLink 3 summaryLink 4 asSummaryLink 7 nssaExternalLink 8 subtotal	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.5.1.2
qtechOspfAreaLsaDBSumCounts number os this type Lsa in this area , if this type Lsa does not exist,this field is 0.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.5.1.3
qtechOspfAreaLsaDBSumDeletes number os this type Lsa which has been delete in this area , if this type Lsa is not been deleted,this field is 0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.5.1.4
qtechOspfAreaLsaDBSumMaxage number of this type Lsa which has up to Maxage, if this type Lsa which has up to Maxage does not exist, this field is 0	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.5.1.5

LSA database total summary infromtion in the all areas .

qtechOspfLsaDBSumEntry row .1.3.6.1.4.1.27514.1.1.10.2.30.1.8.6.1

the entry of this table.

Indexes

qtechOspfLsaDBSumLsaType

Column	Syntax	OID
qtechOspfLsaDBSumLsaType the table's entry type.	Enumeration Enumerated Values: 1 routerLink 2 networkLink 3 summaryTotalLink 4 asSummaryTotalLink 5 asExternalLink 7 nssaExternalLink 8 total	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.6.1.1
qtechOspfLsaDBSumCounts total number of this type Lsa in all area .	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.6.1.2
qtechOspfLsaDBSumDeletes total number of this type Lsa deleted in all area .	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.6.1.3
qtechOspfLsaDBSumMaxage total number of this type Lsa which has been up to max age in all area	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.8.6.1.4

the neighbor detail infomation .

qtechOspfNeighborEntry row .1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1

the entry of this table.

Indexes

qtechOspfNbrIpAddr qtechOspfNbrAddressLessIndex

Column	Syntax	OID
qtechOspfNbrIpAddr The IP address this neighbor(neighbor's interface IP address) is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the ad- dress of another of the neighbor's interfa…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.1
qtechOspfNbrAddressLessIndex On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.2
qtechOspfNbrRtrId A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System.	OSPF-MIBRouterID	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.3
qtechOspfNbrOptions A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.4
qtechOspfNbrPriority The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network.	OSPF-MIBDesignatedRouterPriority Type Constraints: range: 0..255	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.5
qtechOspfNbrState The State of the relationship with this Neigh- bor.	Enumeration Enumerated Values: 1 down 2 attempt 3 init 4 twoWay 5 exchangeQtech 6 exchange 7 loading 8 full	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.6
qtechOspfNbrEvents The number of times this neighbor relationship has changed state, or an error has occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.7
qtechOspfNbrLsRetransQLen The current length of the retransmission queue.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.8
qtechOspfNbmaNbrStatus This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.9
qtechOspfNbmaNbrPermanence This variable displays the status of the en- try. 'dynamic' and 'permanent' refer to how the neighbor became known.	Enumeration Enumerated Values: 1 dynamic 2 permanent	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.10
qtechOspfNbrHelloSuppressed Indicates whether Hellos are being suppressed to the neighbor	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.11
qtechOspfNbrDeadTimeDueIn if in this interval ,hello packet is not been received , the neighbor is recognized dead.if received,it will recovery the dead time which has been setted.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.12
qtechOspfNbrNeighborUpTime the time that the neighbor has been up.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.13
qtechOspfNbrDR the Designated Router of this neighbor.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.14
qtechOspfNbrBDR the Backup Designated Router of this neighbor.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.15
qtechOspfNbrArea the area where the neighbor is in.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.16
qtechOspfNbrRetransmissionNum the Retransmission times.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.17
qtechOspfNbrIfState The neighbor's interface State which connected to local router.	Enumeration Enumerated Values: 0 other 1 designatedRouter 2 backupDesignatedRouter 3 otherDesignatedRouter	.1.3.6.1.4.1.27514.1.1.10.2.30.1.9.1.18

This entity's OSPF border routing table.

qtechOspfRouteEntry row .1.3.6.1.4.1.27514.1.1.10.2.30.1.10.1

A route to a destination.

Indexes

qtechOspfRouteDest qtechOspfRouteArea qtechOspfRouteNextHop

Column	Syntax	OID
qtechOspfRouteDest Router ID of the destination.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.10.1.1
qtechOspfRouteArea The area ID of the area from which this route is learned.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.10.1.2
qtechOspfRouteNextHop Next hop toward the destination.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.27514.1.1.10.2.30.1.10.1.3
qtechOspfRouteCost Cost of using this route.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.10.1.4
qtechOspfRouteDRType The router type of the destination; it is either an ABR or ASBR or both.	Enumeration Enumerated Values: 1 abr 2 asbr 3 both	.1.3.6.1.4.1.27514.1.1.10.2.30.1.10.1.5
qtechOspfRouteType this field indicate this route is an intral area route or inter area route.	Enumeration Enumerated Values: 1 intral-area-route 2 inter-area-route	.1.3.6.1.4.1.27514.1.1.10.2.30.1.10.1.6
qtechOspfRouteSpfNo The internal number of the shortest path first (SPF) calculation that installs this route.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.27514.1.1.10.2.30.1.10.1.7