QTECH-L3Igmp-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
4
Rows
4
Columns
16
igmpIfExTable
table.1.3.6.1.4.1.27514.1.2.5.7.2
·
1 row entry
·
6 columns
Uses the qtech variant from
Command help
/opt/observium/mibs/qtech.
Walk igmpIfExTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-L3Igmp-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-L3Igmp-MIB::igmpIfExTable'
IGMP interface extend information including the configured access control list and querier timeout.
Information describing the configured ACL and querier timeout .
Indexes
| Column | Syntax | OID |
|---|---|---|
| igmpifIndexthe index of the interface receiving IGMP packets. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.27514.1.2.5.7.2.1.1 |
| igmpIfPortListthe ports filter IGMP packets in this interface. | PortListr/w | .1.3.6.1.4.1.27514.1.2.5.7.2.1.2 |
| igmpifAccessNumthe number of the access control list used to filter IGMP packet | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.27514.1.2.5.7.2.1.3 |
| igmpifQuerierExpireThe amount of time elapsed before the Other Querier Present Timer expires | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.27514.1.2.5.7.2.1.4 |
| igmpifV2QuerierTimerThe time remaining until the host assumes that there are no IGMPv2 routers present on the interface. While this is non- zero and igmpInterfaceV1QuerierTimer is zero, the host will reply to all queries with version 2 m… | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.27514.1.2.5.7.2.1.5 |
| igmpifLimiGroupNumthe limit count of group for the interface | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.27514.1.2.5.7.2.1.6 |
igmpGroupVlanTable
table.1.3.6.1.4.1.27514.1.2.5.7.3
·
1 row entry
·
3 columns
Uses the qtech variant from
Command help
/opt/observium/mibs/qtech.
Walk igmpGroupVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-L3Igmp-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-L3Igmp-MIB::igmpGroupVlanTable'
the list information of static group and ingress vlan.
entry of information about static group and ingress vlan
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| igmpGroupIPthe static multicast group ip | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.27514.1.2.5.7.3.1.1 | ||||||||||||
| igmpVlanIDthe specific ingress vlan | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.27514.1.2.5.7.3.1.2 | ||||||||||||
| igmpGroupVlanStatusThe status of this entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.27514.1.2.5.7.3.1.3 |
igmpCacheTableEx
table.1.3.6.1.4.1.27514.1.2.5.7.4
·
1 row entry
·
4 columns
Uses the qtech variant from
Command help
/opt/observium/mibs/qtech.
Walk igmpCacheTableEx
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-L3Igmp-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-L3Igmp-MIB::igmpCacheTableEx'
IGMP cache extend information including the configured filter mode and source list.
Information describing the configured filter mode and source list.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpCacheAddressExThe IP multicast group address for which this entry contains information. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.27514.1.2.5.7.4.1.1 | ||||
| igmpCacheIfIdxExThe interface for which this entry contains information for an IP multicast group address. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.27514.1.2.5.7.4.1.2 | ||||
| igmpCacheVersion2HostTimerThe time remaining until the local router will assume that there are no longer any IGMP version 2 members on the IP subnet attached to this interface. Upon hearing any IGMPv2 Membership Report, this value is reset to t… | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.27514.1.2.5.7.4.1.3 | ||||
| igmpCacheFilterModeThe Filter Mode for the IP multicast group address. | FilterMode Type Values:
| .1.3.6.1.4.1.27514.1.2.5.7.4.1.4 |
igmpSrcInfoTable
table.1.3.6.1.4.1.27514.1.2.5.7.5
·
1 row entry
·
3 columns
Uses the qtech variant from
Command help
/opt/observium/mibs/qtech.
Walk igmpSrcInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-L3Igmp-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-L3Igmp-MIB::igmpSrcInfoTable'
the list information of specific source ip addres.
entry of information about specific source
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| igmpSrcAddressthe specific source address | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.27514.1.2.5.7.5.1.1 | ||||||||||||
| igmpSrcTimerthe timer of the specific source address | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.27514.1.2.5.7.5.1.2 | ||||||||||||
| igmpSrcInfoStatusThe status of this entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.27514.1.2.5.7.5.1.3 |