QTECH-IPSEC-MIB Table View

qtechIPSecTunIKETunnelIndex

Column Syntax OID

qtechIPSecTunIfIndex

The interface index( the ifIndex of ifTable ).

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.1

qtechIPSecTunIndex

The index of IPSec Phase-2 Tunnel Table. The value of
the index is a number which begins at one and is
incremented with each tunnel that is created. The
value of this object will wrap at 2,147,483,647.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.2

The index of the associated IPSec Phase-1 IKE Tunnel
(IKETunIndex in the IKETunnelTable). 2147483647 is defined as
invalid value.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.3

qtechIPSecTunLocalAddr

The IP address of the local peer for the IPSec Phase-2
Tunnel. 0.0.0.0 is defined as invalid value.

Type Constraints:
range: 4

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.4

The IP address of the remote peer for the IPSec Phase-2
Tunnel. 0.0.0.0 is defined as invalid value.

qtechIPSecTunLocalHostname

Type Constraints:
range: 4

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.5

The Hostname of the local peer for the IPSec Phase-2
Tunnel.

qtechIPSecTunRemoteHostname

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.6

The Hostname of the remote peer for the IPSec Phase-2
Tunnel.

qtechIPSecTunTotalRefreshes

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.7

qtechIPSecTunKeyType

The key negotiate mode used by the IPSec Phase-2 Tunnel.

QtechIPSecNegoType

Type Values:

1	ike
2	manual
2147483647	invalidType

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.8

qtechIPSecTunEncapMode

The encapsulation mode used by the IPSec Phase-2 Tunnel.

QtechEncapMode

Type Values:

1	tunnel
2	transport
2147483647	invalidMode

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.9

qtechIPSecTunInitiator

The initiator of this IPSec tunnel. Value none is used for manual
IPsec tunnel, for there is no initiator or responder in this method.

Enumeration

Enumerated Values:

1	local
2	remote
2147483647	none

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.10

qtechIPSecTunLifeSize

The negotiated LifeSize of the IPSec Phase-2 Tunnel in kilobytes.
2147483647 is defined as invalid value.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.11

qtechIPSecTunLifeTime

The negotiated LifeTime of the IPSec Phase-2 Tunnel in seconds.
2147483647 is defined as invalid value.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.12

qtechIPSecTunRemainTime

The remain time of SA in seconds. 2147483647 is defined as invalid
value.

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.13

qtechIPSecTunActiveTime

The duration the IPSec Phase-2 Tunnel has been active in
hundredths of seconds. 2147483647 is defined as invalid value.

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.14

qtechIPSecTunCreateTime

The Time Stamp when the IPSec Phase-2 Tunnel created.

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.15

qtechIPSecTunRemainSize

The remain LifeSize of SA in kilobytes. 2147483647 is defined as
invalid value.

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.16

The total number of security association refreshing performed.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.17

qtechIPSecTunCurrentSaInstances

The number of security associations which are currently active
or expiring.

SNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.18

qtechIPSecTunInSaEncryptAlgo

The encryption algorithm used by the inbound security association
of the IPSec Phase-2 Tunnel.

QtechEncryptAlgo

Type Values:

0	none
2	desCbc
3	threedesCbc
12	aesCbc
128	sm1Cbc
2147483647	invalidAlg

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.19

qtechIPSecTunInSaAhAuthAlgo

The authentication algorithm used by the inbound authentication
header (AH) security association of the IPSec Phase-2 Tunnel.

qtechIPSecTunInSaEspAuthAlgo

Type Values:

0	none
1	md5
2	sha
2147483647	invalidAlg

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.20

The authentication algorithm used by the inbound encapsulation
security protocol(ESP) security association of the IPSec
Phase-2 Tunnel.

qtechIPSecTunDiffHellmanGrp

Type Values:

0	none
1	md5
2	sha
2147483647	invalidAlg

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.21

The Diffie Hellman Group used by the security association of the
IPSec Phase-2 Tunnel.

QtechDiffHellmanGrp

Type Values:

0	none
1	modp768
2	modp1024
2147483647	invalidMode

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.22

qtechIPSecTunOutSaEncryptAlgo

The encryption algorithm used by the outbound security
association of the IPSec Phase-2 Tunnel.

QtechEncryptAlgo

Type Values:

0	none
2	desCbc
3	threedesCbc
12	aesCbc
128	sm1Cbc
2147483647	invalidAlg

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.23

qtechIPSecTunOutSaAhAuthAlgo

The authentication algorithm used by the outbound
authentication header (AH) security association of
the IPSec Phase-2 Tunnel.

qtechIPSecTunOutSaEspAuthAlgo

Type Values:

0	none
1	md5
2	sha
2147483647	invalidAlg

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.24

The authentication algorithm used by the outbound encapsulation
security protocol(ESP) security association of the IPSec
Phase-2 Tunnel.

Type Values:

0	none
1	md5
2	sha
2147483647	invalidAlg

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.25

qtechIPSecTunMapName

The Map name used by this IPSec tunnel.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.26

qtechIPSecTunSeqNum

The sequence number of policy used by this IPSec tunnel.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.27

qtechIPSecTunStatus

The status of the IPSec Tunnel.

QtechIPSecTunnelStater/w

Type Values:

1	establishing
2	active
3	expiring

.1.3.6.1.4.1.27514.1.1.10.2.94.1.1.1.28

qtechIPSecTunnelStatTable

table

.1.3.6.1.4.1.27514.1.1.10.2.94.1.2 · 1 row entry · 10 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk qtechIPSecTunnelStatTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-IPSEC-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-IPSEC-MIB::qtechIPSecTunnelStatTable'

The IPSec Phase-2 Tunnel Statistics Table.

qtechIPSecTunnelStatEntry row .1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1

Information about qtechIPSecTunnelStatTable.

Indexes

Column	Syntax	OID
qtechIPSecTunInOctets The total number of octets received by this IPSec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.1`
qtechIPSecTunInDecompOctets The total number of decompressed octets received by this IPSec Phase-2 Tunnel. This value is accumulated AFTER the packet is decompressed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.2`
qtechIPSecTunInPkts The total number of packets received by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.3`
qtechIPSecTunInSpeed The Speed(bps) of packets received by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.4`
qtechIPSecTunInDropPkts The total number of packets dropped during receiving process by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.5`
qtechIPSecTunOutOctets The total number of octets sent by this IPSec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.6`
qtechIPSecTunOutUncompOctets The total number of uncompressed octets sent by this IPSec Phase-2 Tunnel.This value is accumulated BEFORE the packet is compressed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.7`
qtechIPSecTunOutPkts The total number of packets sent by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.8`
qtechIPSecTunOutSpeed The Speed(bps) of packets sent by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.9`
qtechIPSecTunOutDropPkts The total number of packets dropped during sending process by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.27514.1.1.10.2.94.1.2.1.10`

qtechIPSecSaTable

table

.1.3.6.1.4.1.27514.1.1.10.2.94.1.3 · 1 row entry · 7 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk qtechIPSecSaTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-IPSEC-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-IPSEC-MIB::qtechIPSecSaTable'

The IPSec Phase-2 Security Protection Index Table.  This table
contains an entry for each active and expiring security association.

qtechIPSecSaEntry row .1.3.6.1.4.1.27514.1.1.10.2.94.1.3.1

Information about qtechIPSecSaTable.

Indexes

Column Syntax OID

qtechIPSecSaIndex

The number of the Sa associated with the Phase-2 Tunnel
Table. The value of this index is a number which begins
at one and is incremented with each Sa associated with
an IPSec Phase-2 Tunnel. The value of this object …

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.27514.1.1.10.2.94.1.3.1.1

qtechIPSecSaDirection

The direction of the SA.

Enumeration

Enumerated Values:

1	in
2	out

.1.3.6.1.4.1.27514.1.1.10.2.94.1.3.1.2

qtechIPSecSaValue

The value of the SPI.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.27514.1.1.10.2.94.1.3.1.3

qtechIPSecSaProtocol

The security protocol of the SA.

QtechSaProtocol

Type Values:

0	reserved
1	isakmp
2	ah
3	esp

.1.3.6.1.4.1.27514.1.1.10.2.94.1.3.1.4

qtechIPSecSaEncryptAlgo

The encryption algorithm used by the security association
of the IPSec Phase-2 Tunnel.

QtechEncryptAlgo

Type Values:

0	none
2	desCbc
3	threedesCbc
12	aesCbc
128	sm1Cbc
2147483647	invalidAlg

.1.3.6.1.4.1.27514.1.1.10.2.94.1.3.1.5

qtechIPSecSaAuthAlgo

The authentication algorithm used by the SA.

Type Values:

0	none
1	md5
2	sha
2147483647	invalidAlg

.1.3.6.1.4.1.27514.1.1.10.2.94.1.3.1.6

qtechIPSecSaStatus

The status of the SA.

QtechIPSecTunnelState

Type Values:

1	establishing
2	active
3	expiring

.1.3.6.1.4.1.27514.1.1.10.2.94.1.3.1.7

qtechIPSecTrafficTable

table

.1.3.6.1.4.1.27514.1.1.10.2.94.1.4 · 1 row entry · 12 columns

Open in standard view

Uses the qtech variant from /opt/observium/mibs/qtech.

Command help

Walk qtechIPSecTrafficTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-IPSEC-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-IPSEC-MIB::qtechIPSecTrafficTable'

The IPSec Phase-2 Tunnel Traffic Table.

qtechIPSecTrafficEntry row .1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1

Information about qtechIPSecTrafficTable.

Indexes

qtechIPSecTrafficLocalType

Column Syntax OID

The type of local peer. Possible values are: a single
IP address, or an IP address range, or an IP subnet.

QtechTrafficType

Type Values:

1	ipv4Addr
2	ipv4AddrSubnet
3	ipv6Addr
4	ipv6AddrSubnet
5	ipv4AddrRange
6	ipv6AddrRange

.1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.1

qtechIPSecTrafficLocalAddr1

The first specification of local peer's IP address. If
the local peer type is single IP address, then this is the
value of the IP address. If the local peer type is IP subnet,
then this is the value of the subnet. If th…

qtechIPSecTrafficLocalAddr2

Type Constraints:
range: 4

.1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.2

The second specification of local peer's IP address. If the local
peer type is single IP address, then this is the value of the
IP address. If the local peer type is IP subnet, then this is
the value of the subnet mask.…

qtechIPSecTrafficLocalProtocol

Type Constraints:
range: 4

.1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.3

The protocol number of the local peer's traffic.

QtechTunnelProtocol

Type Values:

0	none
1	icmp
2	igmp
4	ip
6	tcp
17	udp
50	esp
51	ah

.1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.4

qtechIPSecTrafficLocalPort

The port number of the local peer's traffic.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.5

qtechIPSecTrafficLocalHostname

The Hostname of local peer's IP address.

qtechIPSecTrafficRemoteType

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.6

The type of remote peer. Possible values are: a single
IP address, or an IP address range, or an IP subnet.

QtechTrafficType

Type Values:

1	ipv4Addr
2	ipv4AddrSubnet
3	ipv6Addr
4	ipv6AddrSubnet
5	ipv4AddrRange
6	ipv6AddrRange

.1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.7

qtechIPSecTrafficRemoteAddr1

The first specification of remote peer's IP address.
If the remote peer type is single IP address, then
this is the value of the IP address. If the remote
peer type is IP subnet, then this is the value
of the subnet. If…

qtechIPSecTrafficRemoteAddr2

Type Constraints:
range: 4

.1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.8

Single IP address, then this is the value of the IP
address. If the remote peer type is IP subnet,
then this is the value of the subnet mask. If the
remote peer type is IP address range, then this
is the value of ending…

qtechIPSecTrafficRemoteProtocol

Type Constraints:
range: 4

.1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.9

The protocol number of the remote peer's traffic.

QtechTunnelProtocol

Type Values:

0	none
1	icmp
2	igmp
4	ip
6	tcp
17	udp
50	esp
51	ah

.1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.10

qtechIPSecTrafficRemotePort

The port number of the remote peer's traffic.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.27514.1.1.10.2.94.1.4.1.11

qtechIPSecTrafficRemoteHostname

The Hostname of remote peer's IP address.