QTECH-IGMP-MIB

        This module defines qtech igmp mibs.
    
Source file
QTECH-IGMP-MIB
Last revised
Identity
qtechIgmpMIB
Base OID
1.3.6.1.4.1.27514.1.1.10.2.26
Imported Objects
IF-MIB InterfaceIndex InterfaceIndexOrZero
P-BRIDGE-MIB EnabledStatus
QTECH-SMI qtechMgmt
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) TimeTicks Unsigned32
SNMPv2-TC DisplayString RowStatus
Net-SNMP examples using the qtech MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'QTECH-IGMP-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'QTECH-IGMP-MIB::qtechIgmpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-IGMP-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-IGMP-MIB::qtechIgmpMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (32)
.1.3.6.1.4.1.27514.1.1.10.2.26
.1.3.6.1.4.1.27514.1.1.10.2.26.1
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.1
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.10
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.11
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.12
Unsigned32
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.13
tenths of secondsUnsigned32
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.14
secondsInteger32
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.15
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.16
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.17
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.18
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.19
secondsUnsigned32
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.2
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.3
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.4
tenths of secondsUnsigned32
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.5
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.6
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.7
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.8
.1.3.6.1.4.1.27514.1.1.10.2.26.1.1.1.9
.1.3.6.1.4.1.27514.1.1.10.2.26.1.2
.1.3.6.1.4.1.27514.1.1.10.2.26.1.2.1
.1.3.6.1.4.1.27514.1.1.10.2.26.1.2.1.1
.1.3.6.1.4.1.27514.1.1.10.2.26.1.2.1.2
.1.3.6.1.4.1.27514.1.1.10.2.26.1.2.1.3
.1.3.6.1.4.1.27514.1.1.10.2.26.1.3
.1.3.6.1.4.1.27514.1.1.10.2.26.2
.1.3.6.1.4.1.27514.1.1.10.2.26.2.1
.1.3.6.1.4.1.27514.1.1.10.2.26.2.2
Dependencies (9) 6 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. BRIDGE-MIBrfc
  8. P-BRIDGE-MIBrfc
  9. QTECH-SMIqtech
  10. QTECH-IGMP-MIBqtechselected
Compliance Statements (2)

OID .1.3.6.1.4.1.27514.1.1.10.2.26.2.1.1
The compliance statement for entities which implement
the Qtech IGMP MIB
Required groups

OID .1.3.6.1.4.1.27514.1.1.10.2.26.2.1.2
The compliance statement for device support of IGMP
services.
Object refinements
ObjectAccessSyntaxDescription
qtechIgmpInterfaceQueryInterval
Unsigned32
The Scope is 1-65535.
qtechIgmpInterfaceQueryMaxResponseTime
Unsigned32
The Scope is 10-250.
qtechIgmpInterfaceLastMembQueryIntvl
Unsigned32
The Scope is 1-655.
qtechIgmpInterfaceQuerierPresentTimeout
Unsigned32
The Scope is 60-300.
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.4.1.27514.1.1.10.2.26.1.3.1
A qtechIgmpVersionErr trap signifies version is
different in the interface with host.This trap
should be generated when interface run version
IGMPV1 and reported by host which run version IGMPV2.
also when interface run version IGMPV2 and reported
by host which run version IGMPV1.