QTECH-CLUSTER-MIB
The MIB module for the management of a group of
devices called a 'cluster'. A cluster comprises:
1. A manager device, which is a device that can provide
a single point of management (including SNMP, Web
Console and CLI/Telnet Console) for the devices
in the cluster;
2. Zero or more expansion devicees, or called the
cluster members throughout the context of this MIB,
which are devices that can be managed via a manager
device. The manager device is also considered as a
cluster member. Thus it has an entry in the MIB tables
defined below for cluster members.
Only the manager device IP address, passwords, and SNMP
community strings need to be configured in order to
provide management access to members of the cluster.
The Entity MIB is not cross-referenced from this MIB.
To determine if a particular device can be a manager device
or a member device please refer to the device's
user's guide.
- Source file
QTECH-CLUSTER-MIB- Last revised
- Identity
qtechClusterMIB- Base OID
1.3.6.1.4.1.27514.1.1.10.2.31
Imported Objects
| P-BRIDGE-MIB | EnabledStatus |
| QTECH-SMI | qtechMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TimeStamp |
Net-SNMP examples using the qtech MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'QTECH-CLUSTER-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'QTECH-CLUSTER-MIB::qtechClusterMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-CLUSTER-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-CLUSTER-MIB::qtechClusterMIB'
Objects (84)
Showing 84 of 84 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.27514.1.1.10.2.31 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1 |
||
|
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.1 |
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.10 |
||
|
Integer32
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.11 |
|
|
Integer32
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.12 |
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.13 |
||
|
Enumeration
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.14 |
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.15 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.16 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.16.1 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.16.2 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.17 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.17.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.17.2 |
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.17.3 |
||
|
Integer32
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.17.4 |
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.18 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.18.1 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.18.1.1 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.18.1.2 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.18.1.3 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.19 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.19.1 |
||
|
Integer32
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.19.1.1 |
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.19.1.2 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.19.1.3 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.2 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1.1 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1.10 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1.11 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1.12 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1.13 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1.14 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1.15 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1.16 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1.17 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1.2 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1.3 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1.4 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1.5 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1.6 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1.7 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1.8 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.20.1.9 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.21 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.21.1 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.21.1.1 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.21.1.2 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.21.1.3 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.21.1.4 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.21.1.5 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.21.1.6 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.21.1.7 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.21.1.8 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.21.1.9 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.22 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.22.1 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.22.1.1 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.22.1.2 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.23 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.23.1 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.23.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.23.1.1.1 |
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.23.1.1.2 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.23.1.1.3 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.23.2 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.23.2.1 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.23.2.1.1 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.23.2.1.2 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.23.2.1.3 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.3 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.1.4 |
||
|
|
Integer32
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.5 |
|
Integer32
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.6 |
|
|
Integer32
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.7 |
|
|
Integer32
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.8 |
|
|
Integer32
|
.1.3.6.1.4.1.27514.1.1.10.2.31.1.9 |
|
.1.3.6.1.4.1.27514.1.1.10.2.31.2 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.3 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.3.1 |
||
.1.3.6.1.4.1.27514.1.1.10.2.31.3.2 |
Dependencies (9) 5 direct · 4 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- BRIDGE-MIBrfc
- P-BRIDGE-MIBrfc
- QTECH-SMIqtech
- QTECH-CLUSTER-MIBqtechselected
Conformance Groups (9)
|
qtechClusterName qtechClusterCmdMacAddress qtechClusterIpPool qtechClusterIpMask qtechClusterVlan qtechClusterHopsLimit qtechClusterHopsLimit qtechClusterTimerTopo qtechClusterTimerHello qtechClusterTimerHold qtechClusterTftpServer qtechClusterNumberOfMembers qtechClusterMaxNumberOfMembers qtechClusterDevMaxCapicity
The collection of objects which are used to represent
the status of the cluster. |
.1.3.6.1.4.1.27514.1.1.10.2.31.3.2.1
|
|
|
qtechClusterName qtechClusterDeviceEnable qtechClusterDeviceRole qtechClusterDeviceIP qtechClusterDeviceSn
The collection of objects which are used to represent
the status of the cluster member. These objects are accessible on the cluster members and the manager device. |
.1.3.6.1.4.1.27514.1.1.10.2.31.3.2.2
|
|
|
The collection of objects which are used to represent
the status of single devices which are not in any cluster. These objects are accessible on any single device. |
.1.3.6.1.4.1.27514.1.1.10.2.31.3.2.3
|
|
|
qtechClusterMemberSn qtechClusterMemberMacAddress qtechClusterMemberLcIfx qtechClusterMemberUpIfx qtechClusterMemberLcPort qtechClusterMemberUpPort qtechClusterMemberName qtechClusterMemberIp qtechClusterMemberHops qtechClusterMemberState qtechClusterMemberUpSn qtechClusterMemberUpMAC qtechClusterMemberLastTopoUpdateTime qtechClusterMemberLastUdpUpdateTime qtechClusterMemberNoRecvTopoRspCount qtechClusterMemberNoRecvUdpRspCount qtechClusterMemberReload
The collection of objects which are used to represent
the members of a cluster. |
.1.3.6.1.4.1.27514.1.1.10.2.31.3.2.4
|
|
|
qtechClusterCandidateMacAddress qtechClusterCandidateUpMAC qtechClusterCandidateLcIfx qtechClusterCandidateUpIfx qtechClusterCandidateLcPort qtechClusterCandidateUpPort qtechClusterCandidateHops qtechClusterCandidateUpSn qtechClusterCandidateState
The collection of objects which are used to represent
cluster candidates. These objects are accessible on the manager device only. |
.1.3.6.1.4.1.27514.1.1.10.2.31.3.2.5
|
|
|
The collection of objects which are used to represent
cluster Member add operate. These objects are accessible on the manager device only. |
.1.3.6.1.4.1.27514.1.1.10.2.31.3.2.6
|
|
|
The collection of objects which are used to represent
cluster blackList. These objects are accessible on the manager device only. |
.1.3.6.1.4.1.27514.1.1.10.2.31.3.2.7
|
|
|
The collection of objects which are used to represent
cluster auth password pool. These objects are accessible on the manager device only. |
.1.3.6.1.4.1.27514.1.1.10.2.31.3.2.8
|
|
|
The collection of objects which are used to represent
cluster device auth Password. These objects are accessible on the manager device only. |
.1.3.6.1.4.1.27514.1.1.10.2.31.3.2.9
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.27514.1.1.10.2.31.3.1.1The compliance statement for the CLUSTER MIB.
Required groups
| mandatory | qtechClusterStatusGroup | |
| mandatory | qtechClusterMemberStatusGroup | |
| mandatory | qtechClusterMemberGroup | |
| mandatory | qtechClusterCandidateGroup | |
| mandatory | qtechClusterMemberAddGroup | |
| mandatory | qtechClusterBlackListGroup | |
| mandatory | qtechClusterPasswordAuthPoolGroup | |
| mandatory | qtechClusterDeviceAuthPasswordGroup | |
| mandatory | qtechClusterCandidateStatusGroup |
Notifications / Traps (4)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.27514.1.1.10.2.31.2.1 |
While the state of member device changed, then this trap will be sent.
The qtechClusterMemberState node is as follow, 1 indicates Ready status, 2 indicates Active status, 3 indicates Connect status, and 4 indicates Disconnect status. The node value is as follow. |
|
.1.3.6.1.4.1.27514.1.1.10.2.31.2.2 |
When a device add cluster failure, send a snmp trap to the network
management. then this trap will be sent. |
|
.1.3.6.1.4.1.27514.1.1.10.2.31.2.3 |
The number of cluster devices including candidates and members reaches the maximum allowed,
then this trap will be sent. |
|
.1.3.6.1.4.1.27514.1.1.10.2.31.2.4 |
The number of cluster member including members reaches the maximum allowed,
then this trap will be sent. |