QTECH-CAPWAP-DHCP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
32

qtechDhcpScopeTable

table
.1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1 · 1 row entry · 26 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechDhcpScopeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-CAPWAP-DHCP-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-CAPWAP-DHCP-MIB::qtechDhcpScopeTable' 
A table listing the Scopes defined on the
switch's DHCP Server.
qtechDhcpScopeEntry row .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1
Switch's DHCP Server Scope entry.
Indexes
Column Syntax OID
qtechDhcpScopeIndex
DHCP Scope Identifier Index.
Unsigned32
Constraints:
range: 1-15
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.1
qtechDhcpScopeName
DHCP Scope Name.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.2
qtechDhcpScopeLeaseTime
DHCP Scope Lease time in seconds.
Integer32r/w
Constraints:
range: 120-8640000
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.3
qtechDhcpScopeNetwork
IP Address of the DHCP Scope Network. This is
the address which is used to determine the DHCP
scope a remote Switch is attaching to.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.4
qtechDhcpScopeNetmask
The DHCP Scope Netmask. This the subnet mask for
the address pool.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.5
qtechDhcpScopePoolStartAddress
The DHCP Scope address pool start IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.6
qtechDhcpScopePoolEndAddress
The DHCP Scope address pool end IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.7
qtechDhcpScopeDefaultRouterAddress1
IP Address of the DHCP Scope's default Router
1.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.8
qtechDhcpScopeDefaultRouterAddress2
IP Address of the DHCP Scope's default Router
2.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.9
qtechDhcpScopeDefaultRouterAddress3
IP Address of the DHCP Scope's default Router
3.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.10
qtechDhcpScopeDnsDomainName
DNS Domain name for the DHCP Scope.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.11
qtechDhcpScopeDnsServerAddress1
IP Address of the DHCP Scope's DNS Server 1.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.12
qtechDhcpScopeDnsServerAddress2
IP Address of the DHCP Scope's DNS Server 2.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.13
qtechDhcpScopeDnsServerAddress3
IP Address of the DHCP Scope's DNS Server 3.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.14
qtechDhcpScopeNetbiosNameServerAddress1
IP Address of DHCP Scope's Netbios Name Server
1.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.15
qtechDhcpScopeNetbiosNameServerAddress2
IP Address of DHCP Scope's Netbios Name Server
2.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.16
qtechDhcpScopeNetbiosNameServerAddress3
IP Address of DHCP Scope's Netbios Name Server
3.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.17
qtechDhcpScopeState
DHCP Scope's State.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.18
qtechDhcpScopeRowStatus
Dhcp Scope entry row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.19
qtechDhcpIPPoolUsage
DHCP pool use rate.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.20
qtechDhcpoption43
use DHCP option43 to set ac ipaddress.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.21
qtechDhcpoption138
use DHCP option138 to set ac ipaddress.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.22
qtechDhcpReqtimes
use DHCP pool reqest times.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.23
qtechDhcpReqSuctimes
use DHCP pool request successful times.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.24
qtechDhcpTotalIPNum
total IP address amount of DHCP pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.25
qtechDhcpCurrentUsedIPNum
current used IP amount of DHCP pool.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.3.1.1.26

qtechDhcpGlobalServerAddrTable

table
.1.3.6.1.4.1.27514.1.1.10.2.58.1.4.1 · 1 row entry · 3 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechDhcpGlobalServerAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-CAPWAP-DHCP-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-CAPWAP-DHCP-MIB::qtechDhcpGlobalServerAddrTable' 
A table listing the global external DHCP server 
address configed for DHCP relay.
qtechDhcpGlobalServerAddrEntry row .1.3.6.1.4.1.27514.1.1.10.2.58.1.4.1.1
Global DHCP server address entry configed for DHCP
relay. Upto 20 entries may be added.
Indexes
Column Syntax OID
qtechDhcpGlobalServerIndex
Global DHCP server index.
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.4.1.1.1
qtechDhcpGlobalServerAddress
IP Address of the Global DHCP server
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.4.1.1.2
qtechDhcpGlobalServerRowStatus
This is the status column for this row and used
to create and delete specific instances of rows
in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.4.1.1.3

qtechDhcpIntfServerAddrTable

table
.1.3.6.1.4.1.27514.1.1.10.2.58.1.4.2 · 1 row entry · 3 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechDhcpIntfServerAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-CAPWAP-DHCP-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-CAPWAP-DHCP-MIB::qtechDhcpIntfServerAddrTable' 
A table listing the  external DHCP server address 
on interface configed for DHCP relay.
qtechDhcpIntfServerAddrEntry row .1.3.6.1.4.1.27514.1.1.10.2.58.1.4.2.1
Extern DHCP server address entry configed on interface
for DHCP relay. Upto 20 entries may be added on a interface.
Indexes
Column Syntax OID
qtechDhcpIntfServerIndex
Interface DHCP server index.
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.4.2.1.1
qtechDhcpIntfServerAddress
IP Address of the Global DHCP server
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.4.2.1.2
qtechDhcpIntfServerRowStatus
This is the status column for this row and used
to create and delete specific instances of rows
in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27514.1.1.10.2.58.1.4.2.1.3