QTECH-AC-MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
19
Rows
19
Columns
192

qtechAcAcIpTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.1.1.6 · 1 row entry · 3 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechAcAcIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechAcAcIpTable' 
Add or Del the AC's backup ip address.
qtechAcAcIpTableEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.6.1
The entry of Ac's backup ip address.
Indexes
Column Syntax OID
qtechAcAcIpIndex
AC's Ac name with priority index.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.6.1.1
qtechAcBackAcIp
Set AC's ip list.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.6.1.2
qtechAcAcIpRS
Used to add or del a backup ac ip address in the ac.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.6.1.3

qtechAc80211aRateTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.1.1.12 · 1 row entry · 2 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechAc80211aRateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechAc80211aRateTable' 
The Ap attributes.
qtechAc80211aRateEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.12.1
Get and set the Ap attribtues.
Indexes
Column Syntax OID
qtechAc80211aRate
The global 802.11a rate set in this AC.
802.11a-6, 9, 12, 18, 24, 36, 48, and 54 Mbps.
set 1 for 6Mbps, set 2 for 9Mbps, set 3 for 12Mbps,etc...
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.12.1.1
qtechAc80211aRateType
The rate type:
1--disable
2--mandatory
3--support
Integer32r/w
Constraints:
range: 1-3
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.12.1.2

qtechAc80211bRateTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.1.1.13 · 1 row entry · 2 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechAc80211bRateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechAc80211bRateTable' 
The 802.11b rate attributes.
qtechAc80211bRateEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.13.1
Get and set the Ap attribtues.
Indexes
Column Syntax OID
qtechAc80211bRate
The global 802.11b rate set in this AC.
802.11b-1, 2, 5.5, 11Mbps.
set 1 for 1Mbps, set 2 for 2Mbps, set 3 for 5.5Mbps,etc...
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.13.1.1
qtechAc80211bRateType
The rate type:
1--disable
2--mandatory
3--support
Integer32r/w
Constraints:
range: 1-3
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.13.1.2

qtechAcFlowBlGroupTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48 · 1 row entry · 16 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechAcFlowBlGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechAcFlowBlGroupTable' 
The flow balance group table
qtechAcFlowBlGroupEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1
Get and set the flow balance group attribute.
Indexes
Column Syntax OID
qtechAcFlowBlGroupName
The flow balance group's name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.1
qtechAcFlowBlApName1
The AP name belong to this flow balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.2
qtechAcFlowBlApName2
The AP name belong to this flow balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.3
qtechAcFlowBlApName3
The AP name belong to this flow balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.4
qtechAcFlowBlApName4
The AP name belong to this flow balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.5
qtechAcFlowBlApName5
The AP name belong to this flow balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.6
qtechAcFlowBlApName6
The AP name belong to this flow balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.7
qtechAcFlowBlApName7
The AP name belong to this flow balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.8
qtechAcFlowBlApName8
The AP name belong to this flow balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.9
qtechAcFlowBlApName9
The AP name belong to this flow balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.10
qtechAcFlowBlApName10
The AP name belong to this flow balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.11
qtechAcFlowBlNum
The flow balance group's flow throshold.
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.12
qtechAcFlowBlRS
Used to add or del or modify the flow balance table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.13
qtechAcFlowBlEnable
The flow balance group's flow enable throshold.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.14
qtechAcFlowBlBase
The flow balance group's flow base.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.15
qtechAcFlowBlIsEnable
The flow balance group's enable/disable.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.48.1.16

qtechAcNumBlGroupTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49 · 1 row entry · 15 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechAcNumBlGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechAcNumBlGroupTable' 
The number balance group table
qtechAcNumBlGroupEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1
Get and set the number balance group attribute.
Indexes
Column Syntax OID
qtechAcNumBlGroupName
The number balance group's name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.1
qtechAcNumBlApName1
The AP name belong to this number balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.2
qtechAcNumBlApName2
The AP name belong to this number balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.3
qtechAcNumBlApName3
The AP name belong to this number balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.4
qtechAcNumBlApName4
The AP name belong to this number balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.5
qtechAcNumBlApName5
The AP name belong to this number balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.6
qtechAcNumBlApName6
The AP name belong to this number balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.7
qtechAcNumBlApName7
The AP name belong to this number balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.8
qtechAcNumBlApName8
The AP name belong to this number balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.9
qtechAcNumBlApName9
The AP name belong to this number balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.10
qtechAcNumBlApName10
The AP name belong to this number balance group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.11
qtechAcNumBlNum
The number balance group's number throshold.
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.12
qtechAcNumBlRS
Used to add or del or modify the number balance table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.13
qtechAcNumBlEnable
The number balance group's number enable throshold.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.14
qtechAcNumBlIsEnable
The number balance group's enable/disable.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.27514.1.1.10.2.56.1.1.49.1.15

qtechApCfgTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1 · 1 row entry · 59 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechApCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechApCfgTable' 
The Ap attributes.
qtechApCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1
Get and set the Ap attribtues.
Indexes
Column Syntax OID
qtechApMacAddr
The AP's ethernet mac address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.1
qtechApApName
Ap's Name.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.2
qtechApApgName
Ap group Name.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.3
qtechApDiscTimer
Discovery timer.
Integer32r/w
Constraints:
range: 2-180
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.4
qtechApEchoReqTimer
Echo Request timer.
Integer32r/w
Constraints:
range: 5-255
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.5
qtechApEroReportTimer
Error Report timer.
Integer32r/w
Constraints:
range: 1-1080
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.6
qtechApStaTimeoutTimer
station idle timeout timer.
Integer32r/w
Constraints:
range: 1-2700
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.7
qtechApStatisticsTimer
station idle timeout timer.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.8
qtechApFallback
The fallback value, 1--enable, 2--disable.
Integer32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.9
qtechApImageId
The Image version.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.10
qtechApIpDhcp
The ip dhcp option value, 0--standard, 1--private.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.11
qtechApLocation
Ap Location.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.12
qtechApWpsMfp
0-disable, 1-enable.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.13
qtechApLastRebootReason
The AP's last reboot reason.
Enumeration
Enumerated Values:
0notSupport
1acInit
2linkFail
3sWFail
4hWFail
5otherFail
255unknown
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.14
qtechApEthernetIfName
This object represents the name of the Ethernet interface.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.15
qtechApEthernetIfMacAddress
This object represents MAC address of the Ethernet interface
in the slot represented by qtechApEthernetIfSlotId.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.16
qtechApEthernetIfAdminStatus
This object represents the admin state of the physical
Ethernet interface on the AP.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.17
qtechApEthernetIfOperStatus
This object represents the operational state of the physical
Ethernet interface on the AP.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.18
qtechApEthernetIfRxUcastPkts
This object represents total number of unicast packets
received on the interface.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.19
qtechApEthernetIfRxNUcastPkts
This object represents total number of non-unicast or
mulitcast packets received on the interface
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.20
qtechApEthernetIfTxUcastPkts
This object represents total number of unicast packets
transmitted on the interface.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.21
qtechApEthernetIfTxNUcastPkts
This object represents total number of non-unicast or
mulitcast packets transmitted on the interface
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.22
qtechApEthernetIfDuplex
This object represents interface's duplex mode
Enumeration
Enumerated Values:
1unknown
2halfduplex
3fullduplex
4auto
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.23
qtechApEthernetIfLinkSpeed
Speed of the interface in units of 1,000,000 bits per second
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.24
qtechApEthernetIfPOEPower
This object represents whether this interface supports
Power Over Ethernet (POE)
none - POE is not supported
drawn - This interface supports POE, and power is
being drawn
notdrawn - POE power is not dr…
Enumeration
Enumerated Values:
1none
2drawn
3notdrawn
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.25
qtechApAdminStatus
This object represents whether this interface supports
Power Over Ethernet (POE)
enable - enable to admin
disable - disable to admin
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.26
qtechApEthernetIfRxBoardPkts
This object represents total number of boardcast packets received on the interface
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.27
qtechApEthernetIfRxMultiPkts
This object represents total number of mulitcast packets received on the interface
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.28
qtechApEthernetIfTxBoardPkts
This object represents total number of boardcast packets transmitted on the interface
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.29
qtechApEthernetIfTxMultiPkts
This object represents total number of multicast packets transmitted on the interface
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.30
qtechApEthernetIfDropPkts
This object represents total number of packets dropped on the interface
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.31
qtechApSn
This object represents SN string of the AP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.32
qtechApIp
This object represents ip address of the AP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.33
qtechApStaNum
This object represents Sta Num attach to the AP.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.34
qtechApToFat
This object represents the ap mode, 0 - fit, 1 - fat.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.35
qtechApId
The AP Id
Integer32
Constraints:
range: 1-800
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.36
qtechApSwVer
This object represents SN string of the AP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.37
qtechApBootVer
This object represents boot version string of the AP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.38
qtechApPID
This object represents product id string of the AP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.39
qtechApHwVer
This object represents hardware string of the AP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.40
qtechApStaLimit
This object represents client num limit of the AP.
Integer32r/w
Constraints:
range: 1-30
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.41
qtechApFactoryDefault
1 -- Set the ap to reboot with the factory default configuration.
Enumerationr/w
Enumerated Values:
0normal
1reset
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.42
qtechApCpuUsageTrapTimer
This object represents the AP's cpu usage info trap timer,
second.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.43
qtechApStatTrapTimer
This object present the AP's radio statistic
trap timer, second.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.44
qtechApLinkOnTimeInterval
This object represents the AP's Link on time interval, seconds.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.45
qtechApNetId
This object represents the AP's net unit code.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.46
qtechApUptime
This object represents the AP's capwap uptime.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.47
qtechApState
This object represents the AP's state.
1 -- on line;
2 -- off line
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.48
qtechApNasId
The NAS ID about this AP.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.49
qtechApCoverArea
This object represents the AP's cover type.
1 -- Type A: School;
2 -- Type B: Airfield, Station;
3 -- Type C: Hospital, Hotel, Marketplace;
4 -- Type D: Group customers with specific WLAN requirements
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.50
qtechApLinkOnTimeIntervalMs
This object represents the AP's Link on time interval, 0.01seconds.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.51
qtechApUptimeMs
This object represents the AP's capwap uptime, 0.01seconds.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.52
qtechApHbUptimeMs
This object represents the AP's capwap hotback uptime, 0.01seconds.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.53
qtechApIpv6
This object represents ipv6 address of the AP.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.54
qtechApIpv6Prefix
This object represents ipv6 address prefix of the AP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.55
qtechApIpv6PrefixLen
This object represents ipv6 address prefix length of the AP.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.56
qtechApIpv6Type
This object represents ipv6 address type of the AP.
Enumeration
Enumerated Values:
0unknown
1unicase
2anycase
3multicase
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.57
qtechApIpv6Gateway
This object represents ipv6 gateway address of the AP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.58
qtechApIpv6StaNum
This object represents ipv6 Sta Num attach to the AP.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.1.1.59

qtechApCfgRadioTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2 · 1 row entry · 19 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechApCfgRadioTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechApCfgRadioTable' 
Set the ap attribute per radio.
qtechApCfgRadioEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1
The entry of image id table.
Indexes
Column Syntax OID
qtechApCfgRadioId
The radio id, 1~31.
Integer32
Constraints:
range: 1-31
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.1
qtechApRadioEn
0--disable, 1--enable.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.2
qtechApTxPower
Tx power, 1%.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.3
qtechApDtimPeriod
beacon dtim period, second.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.4
qtechApBeaconPeriod
beacon period, millisecond.
Integer32r/w
Constraints:
range: 20-1000
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.5
qtechApCountry
Ap country code.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.6
qtechApPreaShort
Short preamble support.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.7
qtechApRadioBssid
The AP's radio mac address(BSSID).
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.8
qtechApTxPowerLevel
The ap's tx power level in the radio.
Integer32
Constraints:
range: 1-600
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.9
qtechApTxPowerGlobal
The ap's tx power config as the Global or not.
0--customer, 1-global.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.10
qtechApCurChan
The ap's current channel in the radio.
Integer32r/w
Constraints:
range: 1-165
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.11
qtechApRfGlobal
The ap's channel config as the Global or not.
0--customer, 1-global.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.12
qtechApRadioType
1--802.11b
2--802.11a
Integer32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.13
qtechApRadio11bSup
1--support 802.11b
2--not support 802.11b
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.14
qtechApMaxTxPower
Max tx power, mw.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.15
qtechApMinTxPower
Min tx power, mw.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.16
qtechApCurTxPower
Current tx power, mw.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.17
qtechApMaxTxPowerPer
Max tx power percent, %.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.18
qtechApMinTxPowerPer
Min tx power percent, %.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.2.1.19

qtechApRadioRateCfgTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.2.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechApRadioRateCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechApRadioRateCfgTable' 
The rate set of the ap's radio.
qtechApRadioRateCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.3.1
The attribute of the ap radio rate type.
Indexes
Column Syntax OID
qtechApRadioRate
The ap's rate set in the radio.
802.11a-6, 9, 12, 18, 24, 36, 48, and 54 Mbps.
set 1 for 6Mbps, set 2 for 9Mbps, set 3 for 12Mbps,etc...
802.11b-1, 2, 5.5, 11Mbps.
set 1 for 1Mbps, set 2 for 2Mbps, set 3 for 5.5Mbps,etc…
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.3.1.1
qtechApRadioRateType
The rate type:
1--disable
2--mandatory
3--support
Integer32r/w
Constraints:
range: 1-3
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.3.1.2

qtechApStaticIpCfgTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.2.1.4 · 1 row entry · 4 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechApStaticIpCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechApStaticIpCfgTable' 
The rate set of the ap's radio.
qtechApStaticIpCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.4.1
Config the static ip address of the ap.
Indexes
Column Syntax OID
qtechApIpAddr
The AP's Static Ip Address
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.4.1.1
qtechApIpMask
The AP's Static Ip Address Mask
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.4.1.2
qtechApIpGetway
The AP's Static Ip Address Getway
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.4.1.3
qtechApStaticIpRS
The AP's Static Ip Address Row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.4.1.4

qtechApOfflineTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.2.1.5 · 1 row entry · 3 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechApOfflineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechApOfflineTable' 
The Ap offline time attributes.
qtechApOfflineEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.5.1
Get and set the Ap attribtues.
Indexes
Column Syntax OID
qtechApOfftime
The AP's ethernet mac address.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.5.1.1
qtechApOffApName
Offline Ap's Name.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.5.1.2
qtechApOffMacAddr
The offline AP's ethernet mac address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.5.1.3

qtechApBackupStateTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.2.1.6 · 1 row entry · 1 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechApBackupStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechApBackupStateTable' 
The Ap backup state.
qtechApBackupStateEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.6.1
Get the Ap backup state.
Indexes
Column Syntax OID
qtechApBackupState
The AP's backup state.
Enumeration
Enumerated Values:
0unknown
1master
2slave
 .1.3.6.1.4.1.27514.1.1.10.2.56.2.1.6.1.1

qtechApgCfgTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1 · 1 row entry · 9 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechApgCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechApgCfgTable' 
The attribute of the ap group.
qtechApgCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1
The attribute of the ap group.
Indexes
Column Syntax OID
qtechApgApgName
Ap group's Name.
SNMPv2-TCDisplayString
Constraints:
range: 1-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.1
qtechApgDiscTimer
Discovery timer.
Integer32r/w
Constraints:
range: 2-180
 .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.2
qtechApgEchoReqTimer
Echo Request timer.
Integer32r/w
Constraints:
range: 5-255
 .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.3
qtechApgEroReportTimer
Error Report timer.
Integer32r/w
Constraints:
range: 1-1080
 .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.4
qtechApgStaTimeoutTimer
station idle timeout timer.
Integer32r/w
Constraints:
range: 60-86400
 .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.5
qtechApgStatisticsTimer
station idle timeout timer.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.6
qtechApgFallback
The fallback value, 1--enable, 2--disable.
Integer32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.7
qtechApgImageId
The Ap image version string.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.8
qtechApgCreatEn
0-del, 1-creat.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.1.1.9

qtechApgCfgRadioTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.3.1.2 · 1 row entry · 2 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechApgCfgRadioTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechApgCfgRadioTable' 
The ap group attribute per radio.
qtechApgCfgRadioEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.2.1
The ap group attribute per radio.
Indexes
Column Syntax OID
qtechApgEnableRadioId
The radio id, 1~31.
Integer32
Constraints:
range: 1-31
 .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.2.1.1
qtechApgEnableRadioEn
0--disable, 1--enable.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.2.1.2

qtechApgIntfMapTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.3.1.3 · 1 row entry · 5 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechApgIntfMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechApgIntfMapTable' 
Set the wlan-interface map table type.
qtechApgIntfMapEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.3.1
The entry of the wlan-interface map table.
Indexes
Column Syntax OID
qtechApgWlanIndex
Wlan Id.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.3.1.1
qtechApgWlanId
Wlan Id.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.3.1.2
qtechApgVlanId
Vlan Id.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.3.1.3
qtechApgRadioId
Radio Id.
Integer32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.3.1.4
qtechApgWlanIntfMapRS
Used to add or del a wlan-intf map in the ap group.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27514.1.1.10.2.56.3.1.3.1.5

qtechWlanCfgTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1 · 1 row entry · 14 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechWlanCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechWlanCfgTable' 
The wlan attribute.
qtechWlanCfgEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1
The wlan attribute.
Indexes
Column Syntax OID
qtechWlanId
Wlan Id.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.1
qtechWlanShort
Short Preamble.
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.2
qtechWlanSpctMgmt
Spectrum_Management.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.3
qtechWlanEnQos
enbale qos value.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.4
qtechWlanShortSlotTime
short slot time value.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.5
qtechWlanEnableApsd
IEEE 802.11 Add WLAN.APSD value.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.6
qtechWlanAckType
Ack delayed or immediate value.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.7
qtechWlanTunnelType
Tunnel type value.
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.8
qtechWlanBroadSsid
Broad Ssid value, 0--disable, 1--enable.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.9
qtechWlanRts
rts threshold.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.10
qtechWlanShortTry
Short retries.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.11
qtechWlanLongTry
Long retries.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.12
qtechWlanStaNum
The wireless stationes attach to this wlan.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.13
qtechWlanNasId
The NAS ID about this wlan.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.1.1.14

qtechWlanWlanCreatTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.4.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechWlanWlanCreatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechWlanWlanCreatTable' 
Wlan creat table.
qtechWlanWlanCreatEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.2.1
The entry of Braod Ssid value table.
Indexes
Column Syntax OID
qtechWlanWlanSsid
Wlan Ssid.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.2.1.1
qtechWlanWlanProfile
Wlan profile.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.2.1.2
qtechWlanCreateMapRS
Used to add a wlan.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.2.1.3

qtechWlanChanBandTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.4.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechWlanChanBandTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechWlanChanBandTable' 
Channel band table type.
qtechWlanChanBandEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.3.1
The entry of channel band table.
Indexes
Column Syntax OID
qtechWlanBandV
1 for unii0, 2 for unii1 .. 7 for unii6.
Integer32
Constraints:
range: 1-7
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.3.1.1
qtechWlanChanV
fragment threshold.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.3.1.2
qtechWlanChanBandEn
0-disable,1-enable .
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.3.1.3
qtechWlanChanBandRS
Used to config a wlan channel band.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.3.1.4

qtechWlanLimitChanTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.4.1.4 · 1 row entry · 4 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechWlanLimitChanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechWlanLimitChanTable' 
Channel band table type.
qtechWlanLimitChanEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.4.1
The entry of channel band table.
Indexes
Column Syntax OID
qtechWlanLimitChanFirstV
first channel.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.4.1.1
qtechWlanLimitChanNumV
Channel num.
Integer32r/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.4.1.2
qtechWlanLimitChanMaxTxPowerLv
Max Tx Power Level .
Integer32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.4.1.3
qtechWlanLimitChanRS
Used to config a wlan limit chan.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27514.1.1.10.2.56.4.1.4.1.4

qtechStaTable

table
.1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1 · 1 row entry · 25 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechStaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-AC-MGMT-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-AC-MGMT-MIB::qtechStaTable' 
qtech AC MGMT station table.
qtechStaEntry row .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1
qtech AC MGMT station entry.
Indexes
Column Syntax OID
qtechStaMacAddr
The STA's mac address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.1
qtechStaApMacAddr
The mac address with the AP which the STA attached.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.2
qtechStaVlan
Vlan id the STA belong to.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.3
qtechStaWlanId
Wlan id the STA belong to.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.4
qtechStaIp
This object represents ip address of the client.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.5
qtechStaApIp
This object represents ip address of AP which the client attaches to.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.6
qtechStaApRadioId
This object represents radio id of AP which the client attaches to.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.7
qtechStaApRadioType
This object represents ip address of AP which the client attaches to.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.8
qtechStaAssoType
This object represents sta's associate type.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.9
qtechStaAuthType
This object represents sta's authentication type.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.10
qtechStaRoamTimesPerMin
The Sta roaming times in the last minite.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.11
qtechStaOnTimesPerHour
The Sta turn on times in the last hour.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.12
qtechStaOffTimesPerHour
The Sta turn off times in the last hour.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.13
qtechStaIpv6
The Sta ipv6 address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.14
qtechStaAssoAuthMode
The Sta associate authentication mode.
Enumeration
Enumerated Values:
0open
1wep
2dot1x-wep
3dot1x-wpa
4dot1x-wpa2
5mab
6psk-wpa
7psk-wpa2
8wapi
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.15
qtechStaNetAuthMode
The Sta's authentication mode after associated.
Enumeration
Enumerated Values:
0open
1web
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.16
qtechStaSsid
This object represents wlan ssid with the sta associated.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.17
qtechStaLinkRate
This object represents link rate with the sta associated, unit: kbps.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.18
qtechStaCurChan
The Sta's current channel.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.19
qtechStaClientType
The sta's type.
SNMPv2-TCDisplayString
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.20
qtechStaRssi
The Sta's current RSSI.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.21
qtechStaUserName
This object represents user name with the sta associated.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.22
qtechStaTerminalType
This object represents terminal type with the sta associated.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.23
qtechStaOnlineTime
This object represents the time when sta is associated.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.24
qtechStaUpTimeInterval
This object represents how long sta is online(in seconds).
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.56.5.1.1.1.25