Q-BRIDGE-MIB Table View

A table that contains configuration and control
information for each Filtering Database currently
operating on this device.  Entries in this table appear
automatically when VLANs are assigned FDB IDs in the
dot1qVlanCurrentTable.

dot1qFdbEntry row .1.3.6.1.2.1.17.7.1.2.1.1

Information about a specific Filtering Database.

Indexes

dot1qFdbId

Column	Syntax	OID
dot1qFdbId The identity of this Filtering Database.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.17.7.1.2.1.1.1
dot1qFdbDynamicCount The current number of dynamic entries in this Filtering Database.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.17.7.1.2.1.1.2

A table that contains information about unicast entries
for which the device has forwarding and/or filtering
information.  This information is used by the
transparent bridging function in determining how to
propagate a received frame.

dot1qTpFdbEntry row .1.3.6.1.2.1.17.7.1.2.2.1

Information about a specific unicast MAC address for
which the device has some forwarding and/or filtering
information.

Indexes

dot1qFdbId dot1qTpFdbAddress

Column	Syntax	OID
dot1qTpFdbAddress A unicast MAC address for which the device has forwarding and/or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.2.1.17.7.1.2.2.1.1
dot1qTpFdbPort Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress has been seen. A value of '0' indicates that the port …	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.17.7.1.2.2.1.2
dot1qTpFdbStatus The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of dot1qTpFdbPort, …	Enumeration Enumerated Values: 1 other 2 invalid 3 learned 4 self 5 mgmt	.1.3.6.1.2.1.17.7.1.2.2.1.3

A table containing filtering information for VLANs
configured into the bridge by (local or network)
management, or learned dynamically, specifying the set of
ports to which frames received on a VLAN for this FDB
and containing a specific Group destination address are
allowed to be forwarded.

dot1qTpGroupEntry row .1.3.6.1.2.1.17.7.1.2.3.1

Filtering information configured into the bridge by
management, or learned dynamically, specifying the set of
ports to which frames received on a VLAN and containing
a specific Group destination address are allowed to b…

Indexes

dot1qVlanIndex dot1qTpGroupAddress

Column	Syntax	OID
dot1qTpGroupAddress The destination Group MAC address in a frame to which this entry's filtering information applies.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.2.1.17.7.1.2.3.1.1
dot1qTpGroupEgressPorts The complete set of ports, in this VLAN, to which frames destined for this Group MAC address are currently being explicitly forwarded. This does not include ports for which this address is only implicitly forwarded, in…	PortList	.1.3.6.1.2.1.17.7.1.2.3.1.2
dot1qTpGroupLearnt The subset of ports in dot1qTpGroupEgressPorts that were learned by GMRP or some other dynamic mechanism, in this Filtering database.	PortList	.1.3.6.1.2.1.17.7.1.2.3.1.3

A table containing forwarding information for each
          
VLAN, specifying the set of ports to which forwarding of
all multicasts applies, configured statically by
management or dynamically by GMRP.  An entry appears in
this table for all VLANs that are currently
instantiated.

dot1qForwardAllEntry row .1.3.6.1.2.1.17.7.1.2.4.1

Forwarding information for a VLAN, specifying the set
of ports to which all multicasts should be forwarded,
configured statically by management or dynamically by
GMRP.

Indexes

dot1qVlanIndex

Column	Syntax	OID
dot1qForwardAllPorts The complete set of ports in this VLAN to which all multicast group-addressed frames are to be forwarded. This includes ports for which this need has been determined dynamically by GMRP, or configured statically by mana…	PortList	.1.3.6.1.2.1.17.7.1.2.4.1.1
dot1qForwardAllStaticPorts The set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in this list will also appear in the complete set shown by dot1qForwardAllPorts. …	PortListr/w	.1.3.6.1.2.1.17.7.1.2.4.1.2
dot1qForwardAllForbiddenPorts The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward All Multicast Groups may not be dynamically registered by GMRP. This value will be restored after the device is…	PortListr/w	.1.3.6.1.2.1.17.7.1.2.4.1.3

A table containing forwarding information for each
VLAN, specifying the set of ports to which forwarding of
multicast group-addressed frames for which no
more specific forwarding information applies.  This is
configured statically by management and determined
dynamically by GMRP.  An entry appears in this table for
all VLANs that are currently instantiated.

dot1qForwardUnregisteredEntry row .1.3.6.1.2.1.17.7.1.2.5.1

Forwarding information for a VLAN, specifying the set
of ports to which all multicasts for which there is no
more specific forwarding information shall be forwarded.
This is configured statically by management or
dynami…

Indexes

dot1qVlanIndex

Column	Syntax	OID
dot1qForwardUnregisteredPorts The complete set of ports in this VLAN to which multicast group-addressed frames for which there is no more specific forwarding information will be forwarded. This includes ports for which this need has been determined …	PortList	.1.3.6.1.2.1.17.7.1.2.5.1.1
dot1qForwardUnregisteredStaticPorts The set of ports configured by management, in this VLAN, to which multicast group-addressed frames for which there is no more specific forwarding information are to be forwarded. Ports entered in this li…	PortListr/w	.1.3.6.1.2.1.17.7.1.2.5.1.2
dot1qForwardUnregisteredForbiddenPorts The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward Unregistered Multicast Groups may not be dynamically registered by GMRP. This value will be restored after the …	PortListr/w	.1.3.6.1.2.1.17.7.1.2.5.1.3

A table containing filtering information for Unicast
MAC addresses for each Filtering Database, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific unicast
destination addresses are allowed to be forwarded.  A
value of zero in this table (as the port number from
          
which frames with a specific destination address are
received) is used to specify all ports for which there
is no specific entry in this table for that particular
destination address.  Entries are valid for unicast
addresses only.

dot1qStaticUnicastEntry row .1.3.6.1.2.1.17.7.1.3.1.1

Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from a specific port and
containing a specific unicast destination address are
allow…

Indexes

dot1qFdbId dot1qStaticUnicastAddress dot1qStaticUnicastReceivePort

Column	Syntax	OID
dot1qStaticUnicastAddress The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a unicast address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.2.1.17.7.1.3.1.1.1
dot1qStaticUnicastReceivePort Either the value '0' or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the de…	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.17.7.1.3.1.1.2
dot1qStaticUnicastAllowedToGoTo The set of ports for which a frame with a specific unicast address will be flooded in the event that it has not been learned. It also specifies the set of ports on which a specific unicast address may be dynamically le…	PortListr/w	.1.3.6.1.2.1.17.7.1.3.1.1.3
dot1qStaticUnicastStatus This object indicates the status of this entry. other(1) - this entry is currently in use, but the conditions under which it will remain so differ from the following values. invalid(2) - writing t…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 permanent 4 deleteOnReset 5 deleteOnTimeout	.1.3.6.1.2.1.17.7.1.3.1.1.4

A table containing filtering information for Multicast
and Broadcast MAC addresses for each VLAN, configured
into the device by (local or network) management
specifying the set of ports to which frames received
from specific ports and containing specific Multicast
and Broadcast destination addresses are allowed to be
forwarded.  A value of zero in this table (as the port
number from which frames with a specific destination
address are received) is used to specify all ports for
which there is no specific entry in this table for that
particular destination address.  Entries are valid for
Multicast and Broadcast addresses only.

dot1qStaticMulticastEntry row .1.3.6.1.2.1.17.7.1.3.2.1

Filtering information configured into the device by
(local or network) management specifying the set of
ports to which frames received from this specific port

for this VLAN and containing this Multicast or …

Indexes

dot1qVlanIndex dot1qStaticMulticastAddress dot1qStaticMulticastReceivePort

Column	Syntax	OID
dot1qStaticMulticastAddress The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Multicast or Broadcast address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.2.1.17.7.1.3.2.1.1
dot1qStaticMulticastReceivePort Either the value '0' or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the de…	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.17.7.1.3.2.1.2
dot1qStaticMulticastStaticEgressPorts The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded, regardless of any dynamic information, e.g., from GMRP. A port may not be…	PortListr/w	.1.3.6.1.2.1.17.7.1.3.2.1.3
dot1qStaticMulticastForbiddenEgressPorts The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must not be forwarded, regardless of any dynamic information, e.g., from GMRP. A port may no…	PortListr/w	.1.3.6.1.2.1.17.7.1.3.2.1.4
dot1qStaticMulticastStatus This object indicates the status of this entry. other(1) - this entry is currently in use, but the conditions under which it will remain so differ from the following values. invalid(2) - writing t…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 permanent 4 deleteOnReset 5 deleteOnTimeout	.1.3.6.1.2.1.17.7.1.3.2.1.5

A table containing current configuration information
for each VLAN currently configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received.

dot1qVlanCurrentEntry row .1.3.6.1.2.1.17.7.1.4.2.1

Information for a VLAN configured into the device by

(local or network) management, or dynamically created
as a result of GVRP requests received.

Indexes

dot1qVlanTimeMark dot1qVlanIndex

Column	Syntax	OID
dot1qVlanTimeMark A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.	RMON2-MIBTimeFilter	.1.3.6.1.2.1.17.7.1.4.2.1.1
dot1qVlanIndex The VLAN-ID or other identifier referring to this VLAN.	VlanIndex	.1.3.6.1.2.1.17.7.1.4.2.1.2
dot1qVlanFdbId The Filtering Database used by this VLAN. This is one of the dot1qFdbId values in the dot1qFdbTable. This value is allocated automatically by the device whenever the VLAN is created: either dynamically …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.17.7.1.4.2.1.3
dot1qVlanCurrentEgressPorts The set of ports that are transmitting traffic for this VLAN as either tagged or untagged frames.	PortList	.1.3.6.1.2.1.17.7.1.4.2.1.4
dot1qVlanCurrentUntaggedPorts The set of ports that are transmitting traffic for this VLAN as untagged frames.	PortList	.1.3.6.1.2.1.17.7.1.4.2.1.5
dot1qVlanStatus This object indicates the status of this entry. other(1) - this entry is currently in use, but the conditions under which it will remain so differ from the following values. permanent(2) - this entry, correspond…	Enumeration Enumerated Values: 1 other 2 permanent 3 dynamicGvrp	.1.3.6.1.2.1.17.7.1.4.2.1.6
dot1qVlanCreationTime The value of sysUpTime when this VLAN was created.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.17.7.1.4.2.1.7

A table containing static configuration information for
each VLAN configured into the device by (local or
network) management.  All entries are permanent and will
be restored after the device is reset.

dot1qVlanStaticEntry row .1.3.6.1.2.1.17.7.1.4.3.1

Static information for a VLAN configured into the
device by (local or network) management.

Indexes

dot1qVlanIndex

Column	Syntax	OID
dot1qVlanStaticName An administratively assigned string, which may be used to identify the VLAN.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.2.1.17.7.1.4.3.1.1
dot1qVlanStaticEgressPorts The set of ports that are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port, per-VLAN Registrar control for Registration Fixed for the relevant GVR…	PortListr/w	.1.3.6.1.2.1.17.7.1.4.3.1.2
dot1qVlanForbiddenEgressPorts The set of ports that are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause a port to be included or excluded affect the per-port, per-VLAN Registrar contro…	PortListr/w	.1.3.6.1.2.1.17.7.1.4.3.1.3
dot1qVlanStaticUntaggedPorts The set of ports that should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There i…	PortListr/w	.1.3.6.1.2.1.17.7.1.4.3.1.4
dot1qVlanStaticRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.17.7.1.4.3.1.5

A table containing per-port control and status
information for VLAN configuration in the device.

dot1qPortVlanEntry row .1.3.6.1.2.1.17.7.1.4.5.1

Information controlling VLAN configuration for a port
on the device. This is indexed by dot1dBasePort.

Indexes

No indexes recorded

Column	Syntax	OID
dot1qPvid The PVID, the VLAN-ID assigned to untagged frames or Priority-Tagged frames received on this port. The value of this object MUST be retained across reinitializations of the management system.	VlanIndexr/w	.1.3.6.1.2.1.17.7.1.4.5.1.1
dot1qPortAcceptableFrameTypes When this is admitOnlyVlanTagged(2), the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames or Priority-Tagged frames received on this port will be ac…	Enumerationr/w Enumerated Values: 1 admitAll 2 admitOnlyVlanTagged	.1.3.6.1.2.1.17.7.1.4.5.1.2
dot1qPortIngressFiltering When this is true(1), the device will discard incoming frames for VLANs that do not include this Port in its Member set. When false(2), the port will accept all incoming frames. This contr…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.17.7.1.4.5.1.3
dot1qPortGvrpStatus The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled(2) but dot1qGvrpStatus is still ena…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.2.1.17.7.1.4.5.1.4
dot1qPortGvrpFailedRegistrations The total number of failed GVRP registrations, for any reason, on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.17.7.1.4.5.1.5
dot1qPortGvrpLastPduOrigin The Source MAC Address of the last GVRP message received on this port.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.2.1.17.7.1.4.5.1.6
dot1qPortRestrictedVlanRegistration The state of Restricted VLAN Registration on this port. If the value of this control is true(1), then creation of a new dynamic VLAN entry is permitted only if there is a Static VLAN Registration Entry for the VLAN conc…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.17.7.1.4.5.1.7

A table containing per-port, per-VLAN statistics for
traffic received.  Separate objects are provided for both the
most-significant and least-significant bits of statistics
counters for ports that are associated with this transparent
bridge.  The most-significant bit objects are only required on
high-capacity interfaces, as defined in the conformance clauses
for these objects.  This mechanism is provided as a way to read
64-bit counters for agents that support only SNMPv1.
          
Note that the reporting of most-significant and least-
significant counter bits separately runs the risk of missing
an overflow of the lower bits in the interval between sampling.
The manager must be aware of this possibility, even within the
same varbindlist, when interpreting the results of a request or
          
asynchronous notification.

dot1qPortVlanStatisticsEntry row .1.3.6.1.2.1.17.7.1.4.6.1

Traffic statistics for a VLAN on an interface.

Indexes

BRIDGE-MIBdot1dBasePort dot1qVlanIndex

Column	Syntax	OID
dot1qTpVlanPortInFrames The number of valid frames received by this port from its segment that were classified as belonging to this VLAN. Note that a frame received on this port is counted by this object if and only if it is for a protocol be…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.17.7.1.4.6.1.1
dot1qTpVlanPortOutFrames The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN. This includes bridge management frames originated by this device that are classified as belonging to t…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.17.7.1.4.6.1.2
dot1qTpVlanPortInDiscards The number of valid frames received by this port from its segment that were classified as belonging to this VLAN and that were discarded due to VLAN-related reasons. Specifically, the IEEE 802.1Q counters for Discard In…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.17.7.1.4.6.1.3
dot1qTpVlanPortInOverflowFrames The number of times the associated dot1qTpVlanPortInFrames counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.17.7.1.4.6.1.4
dot1qTpVlanPortOutOverflowFrames The number of times the associated dot1qTpVlanPortOutFrames counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.17.7.1.4.6.1.5
dot1qTpVlanPortInOverflowDiscards The number of times the associated dot1qTpVlanPortInDiscards counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.17.7.1.4.6.1.6

A table containing per-port, per-VLAN statistics for
traffic on high-capacity interfaces.

dot1qPortVlanHCStatisticsEntry row .1.3.6.1.2.1.17.7.1.4.7.1

Traffic statistics for a VLAN on a high-capacity
interface.

Indexes

BRIDGE-MIBdot1dBasePort dot1qVlanIndex

Column	Syntax	OID
dot1qTpVlanPortHCInFrames The number of valid frames received by this port from its segment that were classified as belonging to this VLAN. Note that a frame received on this port is counted by this object if and only if it is for a …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.17.7.1.4.7.1.1
dot1qTpVlanPortHCOutFrames The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN. This includes bridge management frames originated by this device that are classified as belonging to t…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.17.7.1.4.7.1.2
dot1qTpVlanPortHCInDiscards The number of valid frames received by this port from its segment that were classified as belonging to this VLAN and that were discarded due to VLAN-related reasons. Specifically, the IEEE 802.1Q counters for Discard In…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.17.7.1.4.7.1.3

A table containing learning constraints for sets of
Shared and Independent VLANs.

dot1qLearningConstraintsEntry row .1.3.6.1.2.1.17.7.1.4.8.1

A learning constraint defined for a VLAN.

Indexes

dot1qConstraintVlan dot1qConstraintSet

Column	Syntax	OID
dot1qConstraintVlan The index of the row in dot1qVlanCurrentTable for the VLAN constrained by this entry.	VlanIndex	.1.3.6.1.2.1.17.7.1.4.8.1.1
dot1qConstraintSet The identity of the constraint set to which dot1qConstraintVlan belongs. These values may be chosen by the management station.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.17.7.1.4.8.1.2
dot1qConstraintType The type of constraint this entry defines. independent(1) - the VLAN, dot1qConstraintVlan, uses a filtering database independent from all other VLANs in the same set, defined by dot1qConstraintSet. shared(2)…	Enumerationr/w Enumerated Values: 1 independent 2 shared	.1.3.6.1.2.1.17.7.1.4.8.1.3
dot1qConstraintStatus The status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.17.7.1.4.8.1.4

A table that contains mappings from Protocol
Templates to Protocol Group Identifiers used for
Port-and-Protocol-based VLAN Classification.

dot1vProtocolGroupEntry row .1.3.6.1.2.1.17.7.1.5.1.1

A mapping from a Protocol Template to a Protocol
Group Identifier.

Indexes

dot1vProtocolTemplateFrameType dot1vProtocolTemplateProtocolValue

Column	Syntax	OID
dot1vProtocolTemplateFrameType The data-link encapsulation format or the 'detagged_frame_type' in a Protocol Template.	Enumeration Enumerated Values: 1 ethernet 2 rfc1042 3 snap8021H 4 snapOther 5 llcOther	.1.3.6.1.2.1.17.7.1.5.1.1.1
dot1vProtocolTemplateProtocolValue The identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the following values: For 'ethernet', 'rfc1042' and 'sn…	OctetString Constraints: range: 2-2 range: 5-5	.1.3.6.1.2.1.17.7.1.5.1.1.2
dot1vProtocolGroupId Represents a group of protocols that are associated together when assigning a VID to a frame.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.2.1.17.7.1.5.1.1.3
dot1vProtocolGroupRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.17.7.1.5.1.1.4

A table that contains VID sets used for
Port-and-Protocol-based VLAN Classification.

dot1vProtocolPortEntry row .1.3.6.1.2.1.17.7.1.5.2.1

A VID set for a port.

Indexes

BRIDGE-MIBdot1dBasePort dot1vProtocolPortGroupId

Column	Syntax	OID
dot1vProtocolPortGroupId Designates a group of protocols in the Protocol Group Database.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.17.7.1.5.2.1.1
dot1vProtocolPortGroupVid The VID associated with a group of protocols for each port.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.2.1.17.7.1.5.2.1.2
dot1vProtocolPortRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.17.7.1.5.2.1.3